"Shut Down your Mac" window appear
Hello, just now window with message that I need to turn my Mac was appeared, there was instruction that I need to hold power button for a few seconds. I made it and recived error report:
[quote]
Interval Since Last Panic Report: 5436007 sec
Panics Since Last Report: 1
Anonymous UUID: 3B48A598-F87D-45DC-9C54-E8FCEC514F82
Sun Feb 10 22:39:29 2013
panic(cpu 3 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f80e10b23, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x000000040002bdeb, CR3: 0x000000006e3b302f, CR4: 0x00000000000606e0
RAX: 0x000000040002bd93, RBX: 0xffffff8019f9fd10, RCX: 0x000000040002bd93, RDX: 0xffffff800d464d10
RSP: 0xffffff807f85bae0, RBP: 0xffffff807f85baf0, RSI: 0xffffff8019f9fd10, RDI: 0xffffff800d464d10
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff800e058400, R11: 0xffffff7f80db6c30
R12: 0xffffff8019f9fd10, R13: 0xffffff800e058400, R14: 0xffffff800d53bc00, R15: 0xffffff800e058400
RFL: 0x0000000000010203, RIP: 0xffffff7f80e10b23, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000040002bdeb, Error code: 0x0000000000000000, Faulting CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff807f85b790 : 0xffffff8000220792
0xffffff807f85b810 : 0xffffff80002c4794
0xffffff807f85b9c0 : 0xffffff80002da55d
0xffffff807f85b9e0 : 0xffffff7f80e10b23
0xffffff807f85baf0 : 0xffffff7f80e0d2f2
0xffffff807f85bb10 : 0xffffff7f80e0e5df
0xffffff807f85bb40 : 0xffffff800063dd21
0xffffff807f85bba0 : 0xffffff7f80e0bfb8
0xffffff807f85bbe0 : 0xffffff800063baeb
0xffffff807f85bc20 : 0xffffff7f80e0bf16
0xffffff807f85bc40 : 0xffffff8000656fbb
0xffffff807f85bd80 : 0xffffff80002a3f08
0xffffff807f85be80 : 0xffffff8000223096
0xffffff807f85beb0 : 0xffffff80002148a9
0xffffff807f85bf10 : 0xffffff800021bbd8
0xffffff807f85bf70 : 0xffffff80002aef10
0xffffff807f85bfb0 : 0xffffff80002daec3
Kernel Extensions in backtrace:
com.apple.iokit.IOAudioFamily(1.8.6f18)[8D690452-BF17-3DA0-BCAD-F1BCF1495926]@0 xffffff7f80e03000->0xffffff7f80e2ffff
dependency: com.apple.kext.OSvKernDSPLib(1.3)[CF50CA5A-4AF6-3E28-B84B-9619535445E7]@0xfffff f7f80dfd000
BSD process name corresponding to current thread: coreaudiod
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: iMac12,1 (Mac-942B5BF58194151B)
System uptime in nanoseconds: 182546829266205
last loaded kext at 165547627665565: com.apple.filesystems.msdosfs 1.7.1 (addr 0xffffff7f80798000, size 57344)
last unloaded kext at 166466121855806: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f80795000, size 12288)
loaded kexts:
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleBluetoothMultitouch 70.12
com.apple.driver.IOBluetoothA2DPAudioDriver 4.0.8f17
com.apple.driver.IOBluetoothSCOAudioDriver 4.0.8f17
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AGPM 100.12.75
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.kext.ATIFramebuffer 7.3.2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.ATIRadeonX3000 7.3.2
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelHD3000Graphics 7.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.AppleUSBCardReader 3.0.6
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AirPort.Atheros40 505.67.1
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 160.7
com.apple.driver.AppleHIDKeyboard 160.7
com.apple.driver.AppleMultitouchDriver 231.4
com.apple.driver.IOBluetoothHIDDriver 4.0.8f17
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleThunderboltEDMSink 1.1.8
com.apple.driver.AppleThunderboltEDMSource 1.1.8
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.kext.ATI6000Controller 7.3.2
com.apple.kext.ATISupport 7.3.2
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleIntelSNBGraphicsFB 7.3.2
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleThunderboltDPOutAdapter 1.8.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.2.1
com.apple.iokit.IOUSBMassStorageClass 3.0.3
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: iMac12,1, BootROM IM121.0047.B1F, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f22
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.67.5-P2P
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST3500418AS, 500,11 GB
Serial ATA Device: OPTIARC DVD RW AD-5690H
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 5
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3[/quote]
Can anyone explain me what it was?
Why would you want a start button to stop something?
Seriously, I would not routinely shut down your Mac. It is not necessary. Just set it to sleep in System Preferences > Energy Saver.
When you are not using it, just walk away. Things will work better that way. Most of my Macs don't get shut down except while restarting them for software updates. This might be once every couple of months.
Similar Messages
-
How do you Shut Down your Mac?
I just converted from Windows to Mac yesterday and today I'm trying to shut down my Mac, but there's no Start button! How can I get my Start Button back?
Why would you want a start button to stop something?
Seriously, I would not routinely shut down your Mac. It is not necessary. Just set it to sleep in System Preferences > Energy Saver.
When you are not using it, just walk away. Things will work better that way. Most of my Macs don't get shut down except while restarting them for software updates. This might be once every couple of months. -
HT2478 how do you make the setting to change desktop background every time you shut down your mac
how to make setting to change desktop background every time you close your mac
because i want to make it if anybody tries to change my dekstop picture i want it to go backto set desktop pictureDon't let other people access your Mac in admin mode - they might change something a lot more important than the Desktop picture.
However you can use Automator: create an Application in it, and select 'Set the Desktop Picture' from the Library. Choose the picture you want. Save the application, then go to System Preferences>Accounts>Login Items and select the Automator application you just created. This will then run at startup and set your chosen picture. -
Shut Down bug reproducable - Macbook appears to shut down when it doesn't
So, I've run into this issue 4x now, and it's the same every single time.
The bug - when you shut down your Macbook, everything appears shutdown, but in reality it's not, your batteries get drained, and a bad day at work ensues.
How to reproduce the bug.
First - have your macbook running normally.
Connect your external monitor, USB Keyboard, and USB devices.. etc.
Close your Macbook lid to force it to sleep
Turn on your macbook using your external keyboard.
This will allow your external monitor to become the primary screen for your mac - While your macbook stays closed and acts as a desktop.
Now through software methods go and select Shut Down.
The macbook will shut down everything and will appear shut down.
The light will stay on however. So if you open the lid, the macbook won't turn on. Once you close the lid, the light will go away. At this point it time, it really does appear as though the macbook is shut down. But it's not!
And you find this out the morning after you wake up.
-- To get around the issue, you essentially just turn your Macbook back on and shut down again. But it's rather annoying when you're in a rush.
Message was edited by: robotoI've been having the same problem - and its not just with the Macbook. I've found several times that I'll go to shutdown my Macbook and the finder, dock, menubar will all vanish - as for shut down - only I'll be left with the wallpaper and spinning sticks. I've left the system for several minutes (5-10) and it still won't shut down so I have to force it to shutdown with the power button. I had exactly the same issue with my 2007 silver iMac the other day. I've also found that my Macbook will appear to shut down and not have done so it drains the battery. I've reset the PRAM on the iMac and still get the issue. Haven't tried with the Macbook I must confess.
I have a local version of iDisk on my desktop and often find they refuse to shutdown even after I've cancelled a sync. I wonder if the problem may lie there? -
Esata card shutting down my mac
I have a situation with a new esata card. I have been having FE problems with a Presonus Firestudio Mobile not syncing because it is on the same FW bus as a Lacie Quatro 2D.
It was suggested I get an esata card and I bought the newer technologie MAX power esata 6GB PCIe 2.0.
I put the esata card in slot number #2 or the 16x of my mac pro. It worked for about 5 minutes then my mac kept shutting down. No matter what I did the mac shut down. There shouldn't be a problem here. I had to take the card out and everything works normally now (no power shutdown)
Do I have the card in the wrong slot. Should it be in 3 or 4?
My drive is powered by a wall wart and presonus is FW powered. The card is esata 6.0 and my lacie is esata 3.0.
Any ideas?a card working properly shouldn't shut down your mac. Unless it's drawing too much power.
isolate your system by not using the FW devices.
http://support.apple.com/kb/HT3964 reset SMC
http://support.apple.com/kb/ht1379 reset NVRAM
try the computer with the card; but not the esata drive; see if you still have the issue.
if you do still have the issue. I'd talk to the place of sell about return exchange or talk to the manufacture about warranty service.
if you don't. try testing the esata card with another esata hard drive. (that is if you have one) again see if you have the issue. -
I see a small window displaying "Are you sure you want to shut down your computer now". How do I stop appearing this window
Is this after you've chosen to Shutdown from the Menu, or just on it's own?
You can press the esc key to cancel, or Enter key to shutdown.
Check your System Preferences>Energy Saver>Schedule & see if it's set to shutdown at a certain time. -
I have accidently shut down my Mac Book Pro during windows 7 installation . When I re started it it began to say " Press any key to boot from CD or DVD " but the keyboard is not working . So I cannot boot It and the CD is also in the drive . Please help me to boot back to Mac book Pro and give me a way to start the key bord .
Hey rudreshchoubey,
Thanks for the question. The following resource may help to resolve your issue:
Boot Camp Installation & Setup Guide
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
If Windows doesn’t install properly
Verify that you’re using an original, full version of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, or Windows 8 Pro.
Restart your Mac and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc into the optical drive or insert the USB flash drive with Windows into a USB port on your Mac. Select the Windows installation disk icon, then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
Thanks,
Matt M. -
My menu bar does not appear at the top of my homepage on a brand new 27" iMac only when i pull up an app. this does not allow me to shut down my mac when all apps are closed nor does it all me to use finder. any help would be awesome
Press the escape (esc) key to exit full-screen mode.
-
A window has frozen on my macbook and i cant shut down my mac.
a window has frozen on my macbook and i cant shut down my mac on system prefrences.
is there nother way i can shut down my mac to get rid of this windowHow to Quit an Unresponsive Application using Force Quit - http://support.apple.com/kb/ht3411.
-
How do I get my mac mountain lion to stop saying, "You shut down your computer because of a problem?
My Mac Mountain Lion desktop computer keeps saying, "You shut down your computer because of a problem." How do I keep this from happening?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
Hi, I cannot restart or shut down my MAC and get the message Geneio.it installer is cancelling your request. Please shut down and retry. However, I cannot seem to exit that application and I have no idea where it came from. Thanks
Could this be a virus?Hold down the Power button until the computer shuts down.
The Safe Mac » Adware Removal Guide - Genieo
The Safe Mac » Adware Removal Guide
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using Dr.Web Light from the App Store. It's free, and since it's from the App Store, it won't destabilize the system. If you prefer one of the better known commercial products, then Thomas recommends using Sophos.(Thank you to Thomas Reed for these recommendations.) If you already use Sophos, then be aware of this if you are using Mavericks: OS X Mavericks- Sophos Anti-Virus on-access scanner versions 8.0 - 9.1 may cause unexpected restarts
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect anything targeting the Mac because there
is no Mac malware in the wild, and therefore, no "signatures" to detect.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware. -
I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS? WAT DO I DO TO GET MY MAC BACK RUNNING
I believe you've posted this multiple times. Once is all that's needed. Also, please don't use all caps. Aside from the fact it means you're shouting it's also harder to read than mixed case.
The error means a bad fan motor or the HDD has failed. In your case it's the latter. You can try the following:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation. -
I can't shut down my Mac because applications won't quit
I can't shut down my Mac because applications won't quit or force quit. Any tips?
I did this with my mail when it couldnt quit
Maybe u can try the following:
At the mail icon below, two fingers select the mail icon
Thereafter select show all windows.
Close all windows that are open
Try quitting your mail again
It works for me :) -
Shutting down my Mac Pro Retina properly?
When I shut down my Mac Pro, I close all apps except the Finder. I've noticed that sometimes when I start up again, the Apple logo and the loading bar don't appear, and when I go into the desktop, the Finder is still open on the folder it was on before I shut it down the last time. But there's still the normal start up sound. I think this is because when I see the screen go black, I close the laptop screen straight away, and it hasn't truly finished shutting down yet. I've been trying to wait for a minute before closing the lid after the screen goes black, and it's been working: the next time I start up my Mac the Apple logo and loading bar appears as usual, and when I get on to the desktop, the Finder isn't open on anything.
My question is, is it really bad for the Mac if I close the lid before it properly shuts down, and I leave it in a kind of limbo state before I start it up next time? Because sometimes I'm in a hurry and I don't have time to wait a minute before closing the lid.Hello animefan4eva,
After reviewing your post, it sounds like you were trying to shut down the computer but closed the lid befor it finished. I would recommend that you read this article, it may be able to help the issue.
Mac notebooks: Wait for your computer to fully shut down before closing the display - Apple Support
If you close the display on a MacBook Pro, MacBook, MacBook Air, PowerBook, or iBook while it is shutting down, the computer may not shut down properly.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
Can i create mcx for shut down properly mac when battery is less 5 %
Hi hello
Can i create mcx for shut down properly mac when battery is less 5 % ?
Thanks for your replyYou can create a mailing list by using the "Groups" feature of Address Book. Simply select "New Group" from the File menu. Name the group, and drag the contacts you need into the group.
In Mail, open up Preferences (under the Mail menu), and click on "Composing". Then make sure that "When sending to a group, show all member addresses" is unchecked.
The auto reply is a feature that is better done on your mail server, as you Mac can only send an auto reply when it is on, with the Mail application open. If you use dot Mac, you can set up a vacation responder through the web, and you can leave your computer switched off.
If you really want to leave your Mac on when you are on holiday, you can set up a mail rule (Preferences, Rules).
Maybe you are looking for
-
Hi guys. I have recently run into a problem. I rarely dip into my RI loops, but just the other day I was previewing the drums and they were overdriving the soundcard of my Mac Mini and I don't know why. The previews for the SI sound just fine. It's s
-
Acrobat Reader 6.0.6 will not start up
When I try to open any PDF file, Acrobat Reader attempts to start up but then immediately shuts down. I get a black splash screen that tells me to restart my computer. I am running OS X 10.4.11 on a PowerBook G4 1.5Ghz with 1.5GB on RAM. No printers
-
Nested tables won't allign with primary table
Hello all. It looks like I'm faced with another table-related obstacle. While I was creating one of my inner pages, I've utilized nested tables to create a column on the left hand side of the page that will hold my secondary menu, while the other col
-
I have a table with a date field that I need to query by day and month only. Basically, if I search for "04/15", the query would return records whose date includes: 04/15/2006, 04/15/2007, 04/15/2008, etc. How can I do that on SQL Server? Thx!
-
Web Error "Details: no parent found, name= TOPComponents"
Anyone else experiencing the issue with the Web Console as reported in TID 3422592. When you run a find on a system (or systems)and then try to view the details you get the error "Details: no parent found, name= TOPComponents Very frustrating and see