Shut off Auto Direct Send of contact info

I just upgraded my 8350i and now it always sends the direct connect info.  I went into the options and changed the "Auto Send My Info" to OFF and it still sends it.....  Any help would be appreciated...

I'll send you a PM.

Similar Messages

  • My computer has been shutting off auto mystically and when I go to log in, the screen goes to lines and I can't turn it on

    My computer has been shutting off auto mystically and when I go to log in, the screen goes to lines and I can't turn it on

    Make sure that you haven't saved Uppercase and Lowercase versions of that name and password.
    Remove saved Password(s):
    * Tools > Options > Security: Passwords: "Saved Passwords" > "Show Passwords"
    * [[Remembering passwords]]

  • Can I shut off auto-correct when typing text messages

    When I am typing a text message, my phone auto corrects.  Is there a way to shut this feature off?

    You can turn it off but it will be off for all uses on the phone, not just text messages. The on/off control is in Settings > General > Keyboard

  • Any way to shut off auto publish in gallery?

    Lots of issues with Iphoto 09 but, I working through them
    One issue is my use of Gallery which was pretty much ok in 08
    Now, my photos are placed on the internet in an order other then what I want. I try to select them in the order I want but, they are shuffled when they go into the gallery. Only way to avoid it is to put them in one at a time but,
    the problem is that when you drag a photo to the existing gallery, it almost immediately starts to auto-publish. If I try to do anything to the gallery, add a photo, adjust the photo order, re-name a photo etc. none of the changes get published correctly.
    Is there any way to shut down the "auto-publish" function so that I can add photos, do the editing, rename, change the order, etc. and then when I am done and satisfied click to publish.
    I tried to turn off airport so that it couldn't publish but, I get some kind of goofy error message that says publish failed due to an error in my mobile me log in information? The message is delivered with virtually every change I make, which is fun, and then when I turned airport back on, it apparently lost my faces so, it has been re-cranking on that for the past 24 hours.
    I'm frankly very unhappy with this iphoto update in general but, if I could just handle galleries in an intelligent way, I'd suffer through most of the rest. Just let me make a bunch of changes and then publish when I want to.
    Any help, appreciated.

    I already sent a suggestion but, was hoping to find out it was there.
    When you read their material on gallery it acts like you have to click on the icon to the right of the gallery to start the publishing but, it has pretty much always been automatic for me?
    I do use a "prep" folder to do all the work but, with 09, the pictures are put on the internet out of the order I set? There is no apparent rational reason for it, just does it wrong.
    thanks

  • Shut off auto rotation?

    I downloaded a pdf with some pages in portrait mode and others in landscape. When I rotate the iPad to read the landscape pages of course it rotates the image to the portrait mode which makes it almost impossible to read. Can I turn off the auto rotate feature?

    Do you want to stop the iPad from switching between portrait and landscape? If so, as you hold it in the portrait mode, at the upper right corner is a small swith...just move it and it will lock the screen.

  • My iphone 4 shuts off and won't come back on and sometimes when i send a text the other person gets a blank message. Just got this phone and really don't want to put up with a bunch of problems

    I just got the i phone 4 on Friday and it has shut off and not come back on twice. I was able to get it to come on by holding the top button down for a few seconds but i don't want to have to do that. Also, i am having a problem with texting, i will send a text and the person on the other end says that I have sent a blank text. Just need to know if this is something that is going to continue because if so then I will take it back and get a Droid

    Assuming the phone isn't jailbroken, the basic steps (as needed) are:
    Restart phone (you already did this)
    Reset phone
    Restore phone in iTunes using a backup
    Restore in iTunes as new, without using a backup
    See appendix B of the User Guide for details
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
    If your phone is jailbroken, this is the most frequent cause of the problems you described.  Restoring could permanently brick the phone.
    Note that your iOS is old and the current version is 4.2.8.  It's odd that it wasn't updated when your activated your phone in iTunes, being that you got it last Friday.

  • Hello- I use a radio app with my iPod touch 5, when I plug it in to my JBL dock speaker, it shuts down after about 10 minutes. Can I defeat this auto shut off mode ? thanks -

    Hello- I use a radio app with my iPod touch 5, when I plug it in to my JBL dock speaker, it shuts down after about 10 minutes. Can I defeat this auto shut off mode ? thanks -

    Al that is left are the standard fixes:
    - Reset the dock
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.

  • My 6th Generation Nano Shuts down my Thinkpad, I've tried uninstalling iTunes, turning off auto sync'ing and restoring my ipod, but every time I plug in my iPod, my whole pc goes blue and then reboots in safe mode. Please Help. Thanks.

    My 6th Generation Nano Shuts down my Thinkpad, I've tried uninstalling iTunes, turning off auto sync'ing and restoring my ipod, but every time I plug in my iPod, my whole pc goes blue and then reboots in safe mode. Please Help. Thanks.

    Hello kidmango,
    I am going to have to agree with planb77. Look into other drivers in your computer causing the issue, not just the nano's drivers.
    It is possible that security software is the culprit. Use this:
    iTunes: Troubleshooting security software issues
    You may have to restore your computer to a previous point. From before the issue started. Contact computer manufacture or Windows for steps, or do a search with a search engine.
    I would test the ipod on a known good computer to see if its the ipod is the issue. My gut says no. You can set a reservation at an Apple Retail Store. Apple.com/retail .You can also test a known good ipod on your computer.
    Hope this helps.
    ~Julian

  • IOS7 update deletes my contact info when I send a text, why?

    Since the IOS7 update I have been losing my contact info (Most recent saved numbers within 2-3 months) when I send a text message and when they respond it comes back as a blank number and no name. I send goup text quite often and I have to go to to that numbered text to see who it is. I have discussed this with several family members that has a I4 phone and I5 phone and they are experiencing the same thing. It is very annoying that I am ready to turn this phone in. I  powered the phone off and did the home button and power button to reboot and still experiencing the same problems.  Please help!!

    I found the problem. If you set your text alert tone to none. The phone will not make a message sent sound. I set it to Tritone and it started make the sound again.

  • How do i shut off the setting that sends a text when i am in the car moving?, how do i shut off the setting that sends a text when i an in the car moving?

    how do i shut off the setting that sends a text when i am in the car moving?, how do i shut off the setting that sends a text when i an in the car moving?
    I got a phone call and it ignored the call and sent a text message to that person "On my way can't talk right now"
    What the ****? I didnt ask it to do that. invasion of my proivacy ****** ********

    Instead of Ignore, you must have touched the button for Message. That will send a message from the phone, depending on what you have set. Check the User Guide for a better explanation. http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

  • Shutting Off Sprint.Bla​ckBerry.Ne​t Email Auto-Forwa​rding After Sprint Account Closed

    Hello. I recently had to close my Sprint account and switch to ATT, which meant giving up my Blackberry. Unfortunately, when I closed the Sprint account it didn't occur to me that I would need to shut off the BlackBerry email forwarding service separately. Since it was a Sprint subdomain I assumed Sprint would manage that.
    Now the Sprint service is deactivated and I the Blackberry is no longer in use or attached to an active service plan. However, the email forwarding service is still active, and is trying to push email from my work account to [email protected] This address no longer exists.
    So anyone trying to email me directly via my work account is getting returned mail errors from the Sprint Blackberry service even though the emails are going through to my work account without a problem.
    Blackbery Tech Support requires Sprint to call them directly to deal with the issue. Sprint refuses to help me since I no longer have an account and further says it's something Blackberry needs to fix.
    Everyone who is emailing me at work thinks their email is not getting through and it's creating a great deal of confusion.
    I would really appreciate any advice for getting this fixed. Thanks.
    Solved!
    Go to Solution.

    Whoa. Thought I replied to this a while ago. Sorry about that.
    Thank you very much for your detailed reply. I went back and talked to the person who set this whole thing up to begin with, and it turns out this particular Blackberry was never set up to use BIS.
    Once I heard that, realized you were right: there had to be an email forwarding service somewhere. Network Solutions already told me there wasn't any forwarding going on from their servers, and I believed them before, but I went back and checked.
    It took a while, but I finally found an all-but-hidden setting to forward emails from Network Solutions that was, indeed, trying to forward emails to the blackberry.net address. As soon as I shut that off the problem fixed itself.
    Well, at least now I know I can't trust Network Solutions' technical support to know how their own software works. This whole situation was quite frustrating. The Sprint techs had me convinced it was a known problem with the Blackberry.net account servers.
    Sorry to send everyone on a wild goose chase. Thanks for helping me. Without your suggestions I doubt I ever would have figured it out.
    Have a good weekend.

  • HT1688 Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it

    Messaging does not let me move from one conversation to another without going to the contact info of the person and choosing "send a message", then I can continue the conversation. I'm sure it's a setting I have made by mistake, but can't figure it out

    Hi Elaine
    Here si what I do:
    Since I tend to message with teh same people I leave the messages available to me.  If you are in one conversation with "Karen"  and want to message with "Kathy" tap the message back arrow and select Kathy.
    As always just be careful to rememeber who you are messaging to!

  • Is there a way to remove my facebook contacts from my phone contacts list?  I had an iphone 4 and it was easy to shut off from teh contacts through the groups link at the top left, but the iphone 5s does not have this feature nor can i figure it out throu

    Is there a way to remove my facebook contacts from my phone contacts list?  I had an iphone 4 and it was easy to shut off from teh contacts through the groups link at the top left, but the iphone 5s does not have this feature nor can i figure it out through the settings feature or anything else....HELP please as it is annoying to see all of these contacts!

    Hello ymprice91277, let's solve this mystery! To unlink the Facebook contacts go to Settings, Facebook, turn off contacts.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Is there a way to keep the Nano from auto shutting off?

    This is probably a weird question because it doesn't really involve a problem per se. I am a drummer in a band. I am using my iPod 1 GB Nano to play an intro during our live shows and also play segways between songs because it is more reliable than a laptop. Basically each of my sound clips are in their own playlist so that once the clip ends it stops and doesn't go to the next song and I'm not trying stop it while I'm also playing the drums. But within a minute or so of finishing the sound clip the Nano shuts off. When I turn it back on it causes a small popping sound in the PA (which is undesireable). I'm wondering if there is a way to keep the iPOD from shutting off automatically. I haven't been able to find any settings that allow me to prevent it from auto shut off. Any suggestions? And just to clarify, it is not shutting off while playing the sound clip, but usually a minute or so after. So It's not like it is malfunctioning. But there must be some way to keep it from shutting off automatically.
    Nano   Windows XP  
    Nano   Windows XP  

    Hi Jarame,
    Welcome to Apple Discussions
    Try putting your iPod on Hold. You might want to look at Knowledge Base Document #60951 and Knowledge Base Document #60945 goes over The iPods Different Sleep Modes.
    Jon

  • HT1918 Hi Guys I signed up for Daly Mail Plus and now I want to cancel my subscription. I have signed into ITunes and opened my accounts and I am directed to turn off auto renewal in my accounts section but I cannot find it. Regards Tony

    Hi Guys I want to cancel my subscription to Daily Mail Plus. I was directed to sign into my ITunes account and turn off auto renewal. I signed in to account and do not see any headings "auto renewal" on the page.
    Hope someone can help
    Providence 123

    I don't have any subscriptions, but there are instructions on this page for how to turn them off : http://support.apple.com/kb/HT4098 - are they the instructions that you were following ?

Maybe you are looking for

  • MacBook Pro and External Enclosures

    Just now updating from a PowerBook G4 to a brand new MacBook Pro... I understand there may (will) be issues with trying to use FCP with Mavericks, but I'm really not wanting to switch to FCP X. I would like to get a two-bay external enclosure to use

  • Update values of custom fields in table HRPAD506-Additional Data for PAD506

    Hi Experts, my requirement is write a report program to upload a file with records. I have to capture this records into an internal table and have to update values of 5 custom fields based on ADATANR. Can anyone suggest me about any FM or any way of

  • CGI map file questions, help !!!

    I am trying to use the CGI map file to open web reports. I got two questions at this time. 1. How to refresh the report to reflect resent edits ? I used the CGI map to open a report. Later, I made some edits to the report and opened it again. However

  • Converting Video from 44.1K to 48K

    Hello, I'm trying to convert a video file from 44.1K to 48K for the audio track. I tried using the "Export" feature, which worked fine in regards to the audio stream itself, but the new movie (which was already compressed to begin with) now looks hor

  • VA01 Transaction variant Field Modification

    Hi All, I need to deactivate ( make input = 0 ) certain fields in VA01 txn which has a transaction / screen variant. Everything thing works fine but the problem is, the other fields which was deactivated (make input = 0 ) using transaction variant ap