Shut off button and volume button wont work on ipod touch. How do I fix this?

The on/off button and volume button won't work on my ipod touch!

You can try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem that points to a hardware problem. Apple will exchange your iPod for a refurbished one for this price.
Or you can turn on the Assistive Touch Accessibility feature. See chapter 30 of the Users Guide
iPod touch User Guide (For iOS 5.0 Software)

Similar Messages

  • I just tried to jailbreak my ipod touch 4g and now it wont play any music? how do i fix this?

    I just tried to jailbreak my ipod and it wouldnt work so i just ended the whole thing and it erased all my photos and it wont play any music. How do i fix this?

    The reason the alphabetical sections aren't showing is because you don't have enough songs. In order for them to show, you have to have a certain number of songs. ( I think it's 40 ).

  • Ive upgraded to  X Lion and now photobooth wont work....how do I solve this?

    I did the last update like a month ago and now its not working...:0(

    Hi ...
    Try "resetting" ...
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    If that didn't help, tap Settings > General > Reset > Reset All Settings
    You won't lose any data as a result of a "reset" ...

  • I had to put my ipod back to factory settings, It crashed and now is saying to connect to itunes but when I do this it wont detect my ipod? How do I fix this?

    I really need to get this fixed

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HT201406 in scientific calculator mode the 7 8 9 numbers/area doesn't work on ipod touch, how can I rectify this?

    The screen is not touch sensitive in the area covered by the 7 8 9 numbers when the ipod is in the horizontal (in scientific calculator orientation) - the rest of the screen is fine. But because of the ares affected I cannot even log on to internet as the password needed has the letters in the affected area!! Frustrating!!
    Any idea how to correct this - in simple terms please as I am not very technical at all!!
    There are no physical marks or scratches on the screen in the area affected.

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • My on/off button and volume buttons stopped working.

    For no apparent reason, the on/off button and volume buttons stopped working. iPod touch 4th gen with 4.3.3 installed.

    You can try a couple of things.
    First a hard reboot: hold the sleep/wake and home button down until the unit shuts off and boots back up to the Apple screen.
    Second restore the device py plugging it into iTunes and under the device summary screen click restore. You want to restore from backup to make sure all your info is synced back to the iPod at the end. Depending on how much stuff is on there this can take a while.
    Thrid, take it to the Apple Store and have a Genius look at it. Depending you how bussy your local Apple store is you probably want to make a reservation first.

  • I forgot my ipod password and i didnt use it for along time so it wont even connect to itunes plus it fell in the toilet so my home button and volume button doesnt work what do i do?

    I forgot my ipod password and i didnt use it for along time so it wont even connect to itunes plus it fell in the toilet so my home button and volume button doesnt work what do i do?

    Place the iOS device in recovery mode using this program
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    http://jaxov.com/2010/05/recboot-iphone-recovery-mode/and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    Enter DFU mode without home button or Power Button | technoNix
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

    my ipod nano 6th gen screen is white ive tried the hard disk mode with the power and volume buttons and it still wont work any suggestions?

    You can try Restoring it in iTunes but I believe you will end up needing to have it serviced.

  • Sleep/wake button and volume buttons aren't working..

    iPhone 3GS.. The sleep/wake button and volume buttons aren't working.. Can't shut my phone off, can't put it in sleep mode, can't higher or lower volume or can't put phone on vibrate. Does anyone know how to fix this? It just stop working out of the blue.. I tried to reset my phone to network setting but that doesn't do anything for my problem and I am not able to restart phone by hold sleep/wake button and home button.. I am at a lost and don't know what to do!! Please help!! Thank you

    Try the standard fixes to rule out a software problem:
    - Reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod
    if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.
    You can also turn on Assistive Touch in Settings>General>Accessibility to add those buttons to the iPods screen.

  • HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

    my ipod 4G power button and volume button not working after updated to ios6.
    i also experience wifi issue. my ipod can't detect any wifi signal.
    so deppresing!
    what should i do?
    i can't put my ipod to sleep, can't adjust volume, can't shut off.
    should i update to ios 6.1?
    HELP

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • My sleep button and volume button stop working. what shall i do?

    my sleep button and volume button stop working. what shall i do?

    Try to restore "as new ipod" without using the latest backup, in case it contains corrupt data causing your problem. How to back up your data and set up as a new device

  • My iphone shuts off randomly and the button is too sensitive. Like I don't even press the lock button and it shuts off. This happened after the 7.1 update. It's on the iphone 5.

    My iphone shuts off randomly and the button is too sensitive. Like I don't even press the lock button and it shuts off. Also when my finger barely rubs over the lock button, it shuts off too. This happened after the 7.1 update. It's on the iphone 5. Someone help me. I just want to fix this. Maybe if it's possible I can disable the lock button.

    The lock button does not turn OFF the iPhone. It will give you a screen with the option to turn OFF the iPhone. Possibly the battery is faulty. Make Genius reservation and take iPhone to Apple store for free battery diagnostic testing and evaluation.

  • My 32GB 4G itouch's lock button AND volume button won't work.

    I got my 4G 32GB on Christmas and about two weeks later the lock button and volume button just stopped working. My hands weren't even wet. How do I fix it and how can I restart it without the lock button?

    You may need to make a trip to an Apple Store or other authorized place to have it repaired, assuming it's a hardware issue. If it's a software issue, you can try going to Settings > General > Reset > Erase All Content and Settings. This will force the iPod to reboot and restore it to factory settings, but you will be able to get your data back from a backup. If it is a hardware issue, then it's time for a trip to the store.

  • Sleep/lock button wont work on ipod touch 2g. what can i do??

    Sleep/lock button wont work on ipod touch 2g. what can i do??

    Try to connect in recovery mode and set it up again "as new ipod" : http://support.apple.com/kb/HT1808
    If this does not work, your sleep button might be damaged and you'll have to get it serviced.
    Setting up as new device and backing up the data before is also covered here: http://support.apple.com/kb/HT4137

  • I downloaded new os for my daughter's ipod touch.  I remember during setup after that I checked off my husband's email account and now she is receiving his texts.  How do I fix this.  The "icloud"/ "messages" buttons are both greyed out under settings

    I downloaded new os for my daughter's ipod touch.  I remember during setup after that I checked off my husband's email account and now she is receiving his texts.  How do I fix this.  The "icloud"/ "messages" buttons are both greyed out under settings

    Forgotten RESTRICTIONS Passcode
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored.
    - Restore to factory settings/new iPod.
    - If you are up to file manipulation see:
    How to reset forgotten Restrictions...: Apple Support Communities

Maybe you are looking for

  • LaserJet 4700dn Always prints from Tray 1 (Manual Feed)

    I have a networked LaserJet 4700dn in a lab environment that recently has starting trying to print all jobs on the manual feed Tray 1.  I cannot find a way to reset this to use Tray 2 as the default tray.  I have checked all the OSD settings and used

  • How to batch change file permissions?

    I posted this problem in another forum and think it belong here. A client sent me a CD of data and graphical files. I copied them into a new folder on my desktop but I am unable to alter or change them because they are read only. How can I change all

  • Problem about port on RAC

    RAC on windows server 2003 and oracle version 10.2.0.1 no patch. My problem is RAC that have 2 nodes and when client connect to database with tnsnames.ora via Virtual IP on port 1526 but cannot until the network team use sniffer for capture event and

  • Why are "Signatures" so Unreliable and Buggy?

    Using OS 10.5.4 Ok, why are the Mail "Signatures" so buggy and unreliable? I opened Mail today and when I go new Message my signature do not show up. They worked fine yesterday. I went into the Preferences and under "All Signatures" it shows that I h

  • I/o field in screen programming

    the default data type of i/o field in the screen programming is char(1). how can we declare it as char(10), i want to capture the value of the field in one screen to another field in other screen... in doing this i am able to get only the first chara