Shutdown a remote iMac using Apple Remote Desktop and Automator action

Hi,
I have my iMac and my wife's iMac connected to the same UPS. There is only one USB connector for the UPS that notifies my iMac when its time to shutdown due to a power cut out.
Is there a way for my iMac to then send a command to my wife's iMac (which may be asleep; the iMac not my wife!) and instruct it to shutdown (forcefully)?
The Belkin UPS software enables me to launch an automator action before it shuts down my computer.
Your help would be appreciated,
Tony

Unless you already have Apple Remote Desktop, it will almost certainly be cheaper to just buy a second UPS for your wife's iMac than it will be to purchase ARD.
If you do have ARD 3 already, then it looks like it would be possible to create an Automator workflow that would select your wife's iMac and then send the Unix command "shutdown" (look at the man page for shutdown for the usage). I haven't tried doing this, though, so I can't say for sure, but it looks like it would work.

Similar Messages

  • I don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp.

    i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp

    Hi champrider,
    You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
    OS X Mavericks: Allow access using Apple Remote Desktop
    This help page will provide you with some other useful resources for Apple Remote Desktop -
    Remote Desktop Help
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • How to play itunes music library from iMac using apple remote? Can only use my iPhone as a REMOTE to play on itunes to Apple TV!!

    how can i how can I play itunes library on my IPHONE4 from IMAC using APPLE REMOTE? I can only use my iPhone 4 as a REMOTE to play itunes from IMac to APPLE TV. 

    You cannot.  The remote app is exclusively for remotely controlling an apple tv for playback of a library on your computer.  If you want to play your computer's music on your iPhone you just use home sharing on both devices and play the music in the Music app on your phone, not using the Remote app on your phone.
    Source:
    Set up Remote app for iPhone, iPad, and iPod touch - Apple Support

  • Apple Remote Desktop and controlling over VPN

    Hi All,
    I had a question about whether something was possible and if so if someone could point me to instructions/how-to on setting it up.
    I have three Macs I am administering. One is an iMac that stays in the office on the network. Two are MBP's. One is always at a remote location, the other comes in and out of the office. I work remotely administering the server and the three systems. I have the latest version of Apple Remote Desktop and obviously can access the server fine. I was wondering though if there is any way besides having the person give me their IP address every time that through the VPN I can see their system, then access it in Remote Desktop just like we are on the network together? Basically they connect to the network via VPN if they are remote and I do the same thing and then access their machine.
    I hope that makes sense. I went through different parts of the guide for ARD but didn't come across a method like that described in there.
    Anyone with opinions? Thoughts? Chants of I'm an idiot? haha
    Thanks

    Yeah for some reason I cannot get this to work right. Even if I scan the 5 VPN IP's I have setup I cannot see their machines when I am connected to the VPN. I tested it the other day by connecting one of the systems to an outside internet connection, then logged it into the VPN. I then connected my own to a different source and logged into the VPN, but Remote Desktop just won't find it.
    Just not sure why it doesn't work. I can see the computers on our internal network though, just not any connected via VPN.

  • Apple Remote Desktop and WildBlue Excede

    I am trying, without luck, to get Remote Desktop to work with WildBlue Excede. Can port forwarding be established with their Surfbeam2 Satellite Modem? If so, what are the port numbers, and how is it done?
    Has anyone had success in setting up Apple Remote Desktop and WildBlue?
    WildBlue Technical Support said they do not provide static IP addresses, so it couldn't be done. Something tells me that is not true.
    Has anyone had any luck with WildBlue?
    Many thanks

    Hi Paul,
    Are you trying to connect to a computer that's connect to the internet with wildblue excede? or are you trying to connect to a computer some where else while your connect to the internet with wildeblue excede?
    Ether way, have you considered an altertive solution? For instance LogMeIn?

  • I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

    I am accessing a windows server using remote desktop and I am wondering if I can transfer files by sharing drives?

    Probably. You may be able to use Finder > Go > Connect to server to access the server. You may be able to share folders using Remote Desktop too. Whichever one you like the best.

  • Remote Desktop and Snow Leopard Server

    What is the best way to use Remote Desktop with Snow Leopard Server?
    I purchased a mac mini with snow leopard server and Remote desktop so I can easily manage my 11 computers, install and upgrade software etc. etc.
    The mac mini server will basically be nothing but a server.
    I will use as my main computer a mac pro. Do I need to install Remote Desktop on the server and on my mac pro? What is the best way to deploy the services of Remote desktop and mac os x server?

    You install Apple Remote Desktop on the machine you want to control from. In this case, install on your Mac Pro. All you have to do on the clients (controlled Macs) is enable remote management in the System Preferences under Sharing. Just make sure that all your controlled Macs are up to date on their ARD version (v3.3.2) which can be taken care of from Software Update.

  • Remote Desktop and Airport

    Dear All,
    I have an iMac which is connected to the internet via Airport Extreme, with no direct ethernet connection. I am trying to connect back to the computer via Remote Desktop and using the automatic IP address which is assigned. (Setings->Network)
    I cannot access this IP address via Remote Desktop. Any Ideas?
    Harry

    Harry Ringwood wrote:
    I have an iMac which is connected to the internet via Airport Extreme, with no direct ethernet connection. I am trying to connect back to the computer via Remote Desktop and using the automatic IP address which is assigned. (Setings->Network)
    I suppose you mean you're trying to connect to your Mac from outside your LAN. The address you see in the Network panel of System Preferences is a LAN address. To make what you want to do work, (1) from the remote computer you're going to have to specify the WAN address of the AirPort Extreme and (2) configure the AirPort Extreme (via port mapping) to pass the Remote Desktop signals to your iMac. To see the port mapping settings, in AirPort Utility look at the Advanced panel.

  • Only Remote-Desktop and Replication with 0.0 Reduction

    Hi guys,
    I have a solution with 16 WAAS 4.4.3 and I got good numbers in all default applications except Remote-Desktop and Replication
    ( All Traffic 53% of Reduction).
    I can understand not otimize Remote-Desktop Applications cause the customer is using Metaframe with crypto and already compacted and
    using too RDP with crypto/compacted.
    But in the Replication I would expect some gain in Active Directory and MS-FRS Replication.
    I got 0.0, Actually, the optmized traffic is biggest that the Original Traffic.
    I have to modify something in the Microsoft servers to be able to got reduction in Replication Application ??
    I'm using all the Default Classifiers in Replication Application
    Double-Take                            LZ+TFO+DRE       1100, 1105
    EMC-Celerra-Replicator            LZ+TFO+DRE       8888
    MS-AD-Replication1                 LZ+TFO+DRE       UUID:e3514235-4b06-11d1-ab04-00c04fc2dcd2
    ms-content-repl-srv                   TFO                     507, 560
    MS-FRS1                                LZ+TFO+DRE       UUID:f5cc59b4-4264-101a-8c59-08002b2f8426
    netapp-snapmirror                    LZ+TFO+DRE       10565-10569
    pcsync-http                             LZ+TFO+DRE       8444
    pcsync-https                           TFO                      8443
    rrac                                        TFO                      5678
    Rsync                                     LZ+TFO+DRE       873
    Thanks a Lot
    My Best Regards,
    Andre Lomonaco

    As you said, you need to only send the changes over the line.
    Java can not tell you what has changed, so you need to either write some JNI, or do a check on the current image, with the last image. (this would eat quite a bit of CPU time on the server).
    It might be worth looking at the source for VNC, and other simler products.
    The simpliest solution would be to split the image into blocks of x by y pixels, then do a pixel-by-pixel check on that block, and only send the block if it has changed.
    Next thing to think about is scrapping RMI, and using raw sockets. RMI has a fair sized overhead.
    Zipping a JPEG is unlikely to have any effect. A JPEG is already compressed.
    You might want to look at a lossless compression format, like PNG, as the JPEG will have articles. This might be acceptable. If so, changing the compression ratio of the JPEG might be an option.
    Finally, the bottle neck might be the call to Robot.createScreenCapture. This is not the fastest method.

  • How do you install Windows 7 OEM on iMac using Parallels 8 Desktop for Mac

    I am trying to install windows 7 on my iMac using Parallels 8 desktop for mac so i can use microsoft office 2010. i know there is a mac version that is the same, but my college professor wants me to use the windows version becaus they have diferrent xml coding. and trying to save money i got the oem version of windows 7. is there anything special that i need to do for installing windows 7 oem onto my imac using parallels?

    Geo94 wrote:
    I am trying to install windows 7 on my iMac using Parallels 8 desktop for mac so i can use microsoft office 2010. i know there is a mac version that is the same, but my college professor wants me to use the windows version becaus they have diferrent xml coding.
    Utter nonsense.
    trying to save money i got the oem version of windows 7. is there anything special that i need to do for installing windows 7 oem onto my imac using parallels?
    Just use the defaults. Windows 7 is very slow and really RAM-hungry. You will need 8 GB of RAM on your Mac because Windows 7 needs 2 GB all by itself. Even with that, it runs twice as slow as Windows XP.
    If you've already spent money, there isn't much you can do at this point. I suggest using Apple Pages and, when you are ready to submit something to your professor, export it as a Word document and then re-save that Word document as a Word XML doc. I don't know why Pages doesn't export in docx format. It is built into the operating system. I even have a little utility that will save your clipboard directly to docx. You can download a fully-functional demo from: http://www.etresoft.com/pastefiler
    There are many other utilities that can do the same, including Office 2011 itself. I prefer Pages because it supports modern OS X technologies and is much faster and easier to use than Word, but Pages only exports to DOC, not DOCX. Word is better if you are doing really sophisticated document, but it costs a fair amount money.
    Disclaimer: I may receive some form of compensation, financial or otherwise, from my link.

  • Remote desktop and apache

    remote desktop and apache.
    There are times I feel that someone is looking over my shoulder, and changing my settings and controlling me.
    I would like to at least be able to communicate with them so I can ltarn. I also want to be able to monitor and have some say so as to what they are doing to my computer.
    Thank you

    Thanx for your reply.
    I should have stated that this is my personal computer and if any one should be the administrator I would think it would be me.

  • Can I install CS6 from old Mac on new iMac using apple's migration-assitent

    Can I install CS6 from old Mac on new iMac using apple's migration-assitent?

    you may be lucky, but you should expect problems if you do that.
    you should properly install your adobe software using the adobe installation files.
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Can you use Apple TV 1 and Tv 2 together And what is the best setup

    Hey guys
    Can you use Apple TV 1 and Tv 2 together?
    And if you can what is the best setup with teh two devices above and the need to hook it to one TV.
    Thanks in advance.
    -David

    Welcome to the Apple Community.
    If I understand correctly you want to use both the Apple TV's with one TV.
    There wouldn't be a problem with that, they will each need there own network connection and should be connected to different AV inputs on the TV so that you can switch between each Apple TV as a source with your TV remote.
    If you don't have two HDMI ports on the TV, the Apple TV 1 will connect by component cables, if this isn't possible you would need to get yourself an HDMI switch.

  • I have a Apple Mac desktop and recently was unable to access any YouTube, movies, videos, etc because a "Blocked Plug-in" message comes up with no error message. It asks to upload Abode Reader, but upon completion of this the message is the same.

    I have a Apple Mac desktop and recently can no longer access Youtube, videos, movies, etc because I get a message reading "Blocked Plug-in". There's no error message but it does say to upload Abode Flash Player and the problem will be solved. I do this but it doesn't fix the problem. What am I doing wrong?

    if you already downloaded the adobe flash player onto your mac and still getting that message that means you need to finish the installation of the flash player
    you do this by opening a finder window and going to your downloads, find the flash player in here and then double click on it and follow the prompts to complete the installation.
    after this is completed you will need to completely quit out of the web browser you're using then reopen it for the change to take affect and your issue should be resolved. if it's not you need to contact adobe their number is 800 642-3623.

  • TS1424 everytime i try to download an app from itunes, or to 'view all' the apps listed, the error says; 'We could not complete your iTunes Store reuest. The network connection was reset' I used both my desktop and laptop both on Windows 7 Pro, & net is f

    everytime i try to download an app from itunes, or to 'view all' the apps listed, the error says; 'We could not complete your iTunes Store reuest. The network connection was reset' I used both my desktop and laptop both on Windows 7 Pro, & net is fine. please help. is there soemthing wrong with apple store temporarily?

    The latest message is: 'We could not complete your iTunes Store request. The network connection was reset.'
    In between, I got a messge about verifying my payment method. When I tried to submit the details, I kept getting a mmessage stating that my payment method was declined (my card is not near it's expiration date, and works fine).
    Argh!

Maybe you are looking for