Shutdown button doesn't work in Yosemite

Hi,
I just upgraded to Yosemite but when I try to SHUT DOWN my Mac using the POWER ON/OFF BUTTON, nothing happens, so I have to go to the Apple logo and shutdown from there. Anyone know why the POWER ON/OFF (SHUT DOWN) BUTTON isn't working?
Thank you.

OS X Mavericks: Using the power button

Similar Messages

  • Shutdown button doesn't work for sleeping from the home screen.

    I'm using Mac Mini 2011, with Mavericks. Until Mountain Lion, when I pressed once the startup/shutdown button the machine sleeps. Now, with Mavericks, it doesn't work, we hear a beep instead. How to fix this problem?

    OS X Mavericks: Using the power button

  • [SOLVED] Slim 1.3.2 & Xfce - shutdown buttons doesn't work

    I'm running Xfce & Slim, and my Shutdown/restart/hibernate buttons are greyed out..
    ~/.xinitrc:
    #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    exec startxfce4 --with-ck-launch
    I'm in group power, and I have dbus in damons section in rc.conf...
    #ps aux |grep -i dbus
    ps aux |grep -i dbus
    dbus 500 0.0 0.0 13724 1696 ? Ss 11:45 0:01 /usr/bin/dbus-daemon --system
    drtic 9311 0.0 0.0 20112 516 ? S< 12:47 0:00 dbus-launch --autolaunch faf5e40fa2b384a828c369bb000001c0 --binary-syntax --close-stderr
    drtic 9312 0.0 0.0 13092 1148 ? S<s 12:47 0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
    drtic 9329 0.0 0.0 20112 592 ? S 12:47 0:00 /usr/bin/dbus-launch --sh-syntax --exit-with-session
    drtic 9330 0.0 0.0 14480 1948 ? Ss 12:47 0:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
    drtic 9928 0.1 0.0 13364 1576 ? S 13:03 0:02 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --nofork --print-address 3
    drtic 14037 0.0 0.0 8788 1052 pts/2 S+ 13:27 0:00 grep -i dbus
    any ideas?
    Last edited by drtic_cz (2012-06-21 13:21:00)

    Terminator wrote:Since it's your first post:
    Change the final line of your .xinitrc into 'exec startxfce' (without the --with-ck-launch).
    Thanks, that worked for me.. I just read an article on archwiki, that ck-launch is not required since slim 1.3.3.
    I'm using Slim 1.3.2, so I didn't try to remove it....
    And of course, I searched a lot this forum, it occured after last upgrade, so I searched only few last  pages.
    Thanks again, marking it as solved

  • VoiceOver navigation buttons doesn't work as expected on latest version of Firefox

    VoiceOver navigation buttons doesn't work as expected on latest version of Firefox. VO+Left/Right not jump from element to element
    Version of OS: OS X Yosemite 10.10.1
    Version of Chrome: 42.0.2311.90 (64-bit)
    Version of Firefox: 37.0.2

    Did this work in a previous version of Firefox?
    There is an open bug to improve accessibility on OS X. (Bug 336306) I'll update that bug with any relevant information you provide here.

  • App store doesn't work on yosemite. how can I solve the problem?

    app store doesn't work on yosemite. how can I solve the problem?

    Reinstall Lion, Mountain Lion, Mavericks or Yosemite without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Lion, Mountain Lion, Mavericks, or Yosemite
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

    A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed &amp; I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

    I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

  • Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

    Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

    Hi,
    thanks for your answer. 
    The Size of all disks is: 6 x 4 TB.
    In the Pool are 5 x 4 TB plus 1 x Hot Spare. 
    It comes up to about 14,6 TB of Data formatable.
    But tried it also with just 3 x 4 TB to see if it works. 
    I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine. 
    Here the results of my tests: 
    1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity. 
    new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
    But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only. 
    I added a screenshot: 
    Here you see my storage pool, and I added 3 virtual disk. 
    1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do. 
    About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
    As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
    The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD. 
    This is what properties shows on this volume. Always RAW. 
    I also tried Software Raid5 within the server. 
    This also worked fine. So really only parity. 
    Thanks
    Patrick

  • My screen if frozen and I can't shut off my phone. I already have my assistiave touch button on my screen but it still own't let me shut off my phone. And my lock button doesn't work either

    My screen is frozen on the camera and my phone won't let me shut it off. My lock button doesn't work and my assistance touch button won't let me shut it down either. My phone also takes hours to die and my battery if fully charged so i can't wait for it to die i need to get it back to normal asap! How do I get it to unfreeze?

    A reset is when you press and hold both the home and sleep buttons for 10 seconds or so until the Apple logo appears. You won't lose any data. Give it a try.

  • Volume and Power button doesn't work..how do I fix?

    My son's volume buttons or the power button doesn't work.  Is there something I can do to fix these issues?

    Try the following to rule out a software problem.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                                              

  • "Submit to SAP" Button doesn't work

    Hi to all,
    I'm trying to develop an interactive form using NW04 SP22. My problem is that the submit to sap button doesn't work. I think I have not properly installed active component framework (ACF) on my client pc but I can't find the right ACF to install. I found a note 766191 in which I can download ACF for SP22 but  the link [url]https://sapmats-de.sap-ag.de/download/download.cgi?id=OZOHD0204MQQADJPWOZSGFDNCP39PBJ6TFA2CANJKUPYIGJF16[url]  seems not to work. Where can I find it?
    Thank you very mich,
    Enrico

    Hi Enrico,
    You can download it from the below link:
    http://www.esnips.com/web/arafatfNewFolder/
    Let me know once you are done so that I will delete the link.
    Regards,
    Arafat

  • Can't Add Credit Card (submit button doesn't work)

    Hey. Recently come across a problem trying to add my credit card so I could buy a Twitter app that works with Twitters new authorization.
    The submit button doesn't work. It is still there, but it is unclickable, it doesn't load up anything, or do anything. It doesn't change to being clickable at any time.
    If it helps, I have the Palm Pre, I'm with O2 (UK).
    Can anyone help?
    Post relates to: Pre p100ueu (O2)

    This sounds like a credit card related issue. Has anything about your credit card changed, like a new expiration data? You can go to App Catalog, tap the drop-down menu, select Preferences and Accounts, then choose the account name, enter your profile password, tap continue, When the Edit Credit Card screen appears, re-enter the credit card number and confirm that the remaining info is valid or enter any new information, then submit.

  • My iPod touch 4th gen white's home button doesn't work the first time I press it, but the second time.

    My home button doesn't work the first time I press it, but the second time.  This is very annoying.  Why is it doing this?

    - Try a reset. It cures many ills and nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    -If a hardware problem see:
    fix for Home button

  • HT4527 I want to move all my iTunes from old PC to new PC but Home Sharing on both and it works.  At Step 11, I clicked Home Sharing Import button doesn't work.

    Help!  I want to move all my iTunes music, podcasts, etc. from an old PC to a new PC. I set up Home Sharing on both and it works.  I followed the steps in http://support.apple.com/kb/HT4527 to the letter.  At Step 11, I clicked on Home Sharing on my new PC, then Edit > Select All so I could then import everything to the new computer.  No matter what I try, the Import button doesn't work.  There are two buttons on the lower right hand side of the iTunes screen - one for Settings and one for Import.  The Settings button is clickable but the Import button isn't even live.  In other words, I can see it but not click on it.  I have double-checked my firewall and it is not the problem.  How can I get the Import button to work? 

    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd recommend method 1 since it establishes an ongoing backup for your library.
    Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • My ipod touch 5th generation will not turn on and the home button doesn't work. what do i do?

    Hello my name is Leslie and i would like to ask you guys a question on how to fix my ipod or what is wrong with it. My ipod touch 5th generation will not turn on and the home button doesn't work. what can i do to fix it ?

    Has the home button worked in the past, or is this been something that hasn't worked for some time? The only way to reset the device is with the sleep/wake (power) and home buttons together. Without it, you would have to wait until the battery dies and then plug it in to try and reset it. The Home button is used for several user troubleshooting steps. Without it, you cannot perform a reset, put the device into recovery mode, or place it in DFU mode. You need to get the home button repaired.

  • I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. Some contacts have problems opening files sent by me using Mail too. This was never a problem on pre-Intel. A real Mac **** up !

    I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?

    Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
    Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things.

Maybe you are looking for