Shutdown hang if a mounted cifs filesystem is not responding

I sometimes mount a filesystem over CIFS (quite often a virtual machine). Sometimes I shutdown the virtual (or physical) machine forgetting to unmount the cifs folder. In this situation if I try to shutdown the linux machine, it hangs trying to unmount filesystem, forcing me to do an unclean shutdown (via hardware of the Ctr-Alt-Syst-O key). I suppose the same behaviour will happen if for whatever reason the CIFS server is not responding, so the ability to cleanly shutdfown the machine depends on the fact of having a reliable internet connection and the remote server responding properly. Is there not a possibility to force unmounting an unresponding cifs server? If yes, should it not be a good idea to include it in the archlinux shutdown script.
Last edited by olive (2012-06-08 15:53:50)

We already do this in the netfs rc.d script.

Similar Messages

  • Cannot mount cifs filesystems [solved]

    I have a usb drive plugged into my router that I have set up to mount via autofs.  However, it is failing because for some reason my system suddenly cannot recognize cifs filesystems.  cifs-utils is installed and the latest version
    mount error: cifs filesystem not supported by the system
    Last edited by tlmiller (2012-03-24 05:02:36)

    BAH...
    I could have SWORN I had rebooted already after doing an update, apparently I was mistaken.

  • Not a hang - no misty screen, no hourglass, no 'Not Responding' - but it doesn't respond and updating doesn't fix it.

    Was on some prehistoric version of Firefox as I only update when I have a problem with an old version. It started to become absurdly slow, so I updated to 19.0.2 as advised by the window that came up. However, if anything it's got worse. It starts with a blank window, then the 'Restore Session' page comes up, then it just doesn't let me click on or type anything at all. As I've said, if a hang is when the screen goes misty, the cursor becomes what used to be an hourglass but is now a circle and the words 'Not Responding' appear in the title bar, then this is not a hang because none of those things happen, but I can't do a damn thing with it. I've tried shutting it down through Task Manager, even though it's not using anything like the level of memory where that is usually necessary, and then restarting it, but to no avail. How can I get it working again?

    Do a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 19.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    If you keep having problems then also create a new profile.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/

  • Mount CIFS filesystem permissions

    Hi , i have a very strange issue. 3 servers with OEL 5.6 installed; 2 for OFM forms &report the last for OBIEE all 11g.
    Need to mount 2 cifs file systems provided by a windows share in read-write.
    The first 2 servers are mounting the shares but none except root can write on them (755), same shares mounted on OBIEE servers are mounted writable for all users (777). I do not remember to have done anything to obtain this. What can i serach for ?
    Thanks.

    Hi, first of all thanks for your answer i'll read your doc. But the situation in quite different, i have to mount the same file system from 3 dirrerent server, when i mount the share form server 1 and 2 i have the mount point and all descending folders owned by user root with 755 permission, when i mount the same share from server number 3 i have the mount point owned by root but with 777 permission and i have done nothing different between those servers.

  • Why does Time Machine Hang OSX when a USB drive does not respond?

    I use USB drives to store photo data. When I back up the drives using Time Machine to a Time Capsule, If I have added a large amount of data to the USB drive, the backup will consistently fail with the drive hung. I can see the drive in finder, but I cannot see the directory structure. Often OSX hangs too and I cannot even get to finder, just the whirling colored wheel. Sometimes the system has entered sleep mode and it will not wake up. I if I am using the monitor, I can open the MAC Book Pro cover and the screen there shows alternately, a blue screen and the screen wallpaper, flipping back and forth but otherwise unresponsive. If I turn the USB drive off the OS recovers and Time Machine completes, usually indicating a backup failure (but not always). The drive is always very hot under these circumstances, indicating that the system is issuing repetitive operations to the drive. I should emphasize that I am not writing to the USB drives during backup, Time Machine is just reading the drive. So several questions:
    1) How in the world can a non system drive hang the Operating System? This is a big no-no for a supposedly multi-tasking Operating System.
    2) I use Aperture 2.1 to store data on the USB drives with no problems (at least so far). Why would Time Machine drive the USB drive so hard that it fails? I had the same problem using a USB drive with iTunes. It completely fried the drive by writing to it too intensively during one of the frequent software updates. Is there no throttle mechanism in OSX that limits the disc activity so that the throttle mechanism is not the failure of the drive itself?
    3) Does Apple have a list of USB drives that it has validated to be able to work with it's system reliably?

    Are the USB drives powered from the computer or do they have their own power supplies.
    There is a limit to how much power can be drawn from each USB port and also a total limit. If you exceed this, unexpected things can happen.

  • My i pad is hanged with notification of i cloud and not responding not even shuting down

    i got a notification "NOT ENOUGH STORAGE" (This ipad cannot be backed up becouse there is not engough icloud storage available ) after that i cannot do anything on i pad the notification is not going off after chossing Close or setting buttons. Totaly hanged cannot even acsess the slider to shoutdown the ipad pl help.

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • Mounting local filesystem - FAIL (yet the fs still mounts...) [SOLVED]

    After modifying my time/date setup (setting the hardware clock to UTC, and using a custom timezone file) I started to get a [FAIL] message during boot (after the system had resynched to drive times to the system time), and shutdown.
    @ boot time
    Mounting local filesystem
            Ext3-fs: barriers not enabled
            kjournal starting. Commit interval 5 seconds
            Ext3-fs (sda4): using internal journal
            Ext3-fs (sda4): mounted filesystem with ordered data mode
                                                                                                                     [FAIL]
    @ shutdown
    Unmounting Filesystem                    [FAIL]
    Nothing seems to be negatively affected, and the boot and shutdown processes continue without even pausing, and sda4 (my /home directory) certainly seems to by mounted (since I'm using it now).
    I've run fsck at boot a couple times, but the drives keep coming back clean. I've tried using my old timezone setup, but the fail message persists. I've successfully unmounted and mounted sda4 as Root, trying to generate an error message of some kind, but all I get is a successfully unmounted, or mounted, drive. I've unmounted sda4 priod to shutdown as well, but the message persists.
    The only place in the logs the [FAIL] message shows up is in /var/log/boot:
    Mounting local filesystem   [BUSY]  [FAIL]
    I'm at a loss. I would like to fix this, if only to be sure that it's not a symptom of a larger problem. At the very least, I'd like to know what is causing it.
    Last edited by uxrs75 (2011-08-02 06:40:31)

    You interpret correctly, Logicien. BIOS is set to UTC; HARDWARECLOCK="UTC". Time and date are a-ok.
    I ran mkinitcpio -p kernel26, but the message persists. I also tried using the live cd, and mounting each of the drives in turn. All of them mounted successfully, with no error messages. To verify that it is sda4, I commented the sda4 line out in fstab, and rebooted the machine. I got:
    Mounting Local Filesystems [FAIL]
    but none of the Ext3-fs stuff, and the boot process continued successfully. I'm wondering if it's something else.
    I'll try adding quiet to the kernel boot line later this evening and see what that brings about.
    rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged, using "" makes hwclock fall back
    # to the value in /var/lib/hwclock/adjfile
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # Note: if unset, the value in /etc/localtime is used unchanged
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="UTC"
    TIMEZONE="PST"
    KEYMAP="uk"
    CONSOLEFONT="ter-116n.psf.gz"
    #CONSOLEMAP="8859-1"
    USECOLOR="yes"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MODULES=()
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="darkstar"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
    # - broadcast: broadcast address (ignored for DHCP) (optional)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # broadcast=192.168.0.255
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    interface=eth0
    address=
    netmask=
    broadcast=
    gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(hwclock syslog-ng dbus !network !netfs crond alsa mpd)
    fstab
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    none /dev/pts devpts defaults 0 0
    none /dev/shm tmpfs defaults 0 0
    #none /proc/bus/usb usbfs auto,busgid=101,busmode=0775,devgid=101,devmode=0664 0 0
    /dev/sr0 /media/sr0 auto ro,users,noauto,unhide 0 0
    /dev/sr1 /media/sr1 auto ro,users,noauto,unhide 0 0
    #/dev/sda1 /boot ext2 defaults 0 1
    #/dev/sda2 swap swap defaults 0 0
    #/dev/sda3 / ext3 defaults 0 1
    #/dev/sda4 /home ext3 defaults 0 1
    UUID=597bd99a-173b-4b23-947d-b8a50859bcdd /boot ext2 defaults 0 1
    UUID=a51a3b55-7c5c-45bb-96eb-79cfd1a77f54 swap swap defaults 0 0
    UUID=c6ecf0fe-d2c4-4743-b639-1550295b65c6 / ext3 defaults 0 1
    UUID=ff7030b8-890a-4673-bd1c-f502ca5efb2b /home ext3 defaults 0 1
    /dev/sdb1 /media/sdb1 auto noauto,owner,users 0 0
    /dev/sdb1 /media/sdb1 auto noauto,owner,users 0 0
    /dev/sdc1 /media/sdc1 auto noauto,owner,users 0 0
    /dev/sdd1 /media/sdd1 auto noauto,owner,users 0 0
    /dev/sde1 /media/sde1 auto noauto,owner,users 0 0
    /dev/sdf1 /media/sdf1 auto noauto,owner,users 0 0
    fdisk -l
    Disk /dev/sda: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00000000
    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 208844 104422 83 Linux
    /dev/sda2 208845 738989 265072+ 82 Linux swap / Solaris
    /dev/sda3 738990 103153364 51207187+ 83 Linux
    /dev/sda4 103153365 976768064 436807350 83 Linux
    dumpe2fs -h /dev/sda1
    dumpe2fs 1.41.14 (22-Dec-2010)
    Filesystem volume name: <none>
    Last mounted on: <not available>
    Filesystem UUID: 597bd99a-173b-4b23-947d-b8a50859bcdd
    Filesystem magic number: 0xEF53
    Filesystem revision #: 1 (dynamic)
    Filesystem features: ext_attr resize_inode dir_index filetype sparse_super
    Filesystem flags: signed_directory_hash
    Default mount options: (none)
    Filesystem state: not clean
    Errors behavior: Continue
    Filesystem OS type: Linux
    Inode count: 26208
    Block count: 104420
    Reserved block count: 5221
    Free blocks: 84721
    Free inodes: 26177
    First block: 1
    Block size: 1024
    Fragment size: 1024
    Reserved GDT blocks: 256
    Blocks per group: 8192
    Fragments per group: 8192
    Inodes per group: 2016
    Inode blocks per group: 252
    Filesystem created: Fri Apr 30 20:35:47 2010
    Last mount time: Thu Aug 19 05:44:48 2010
    Last write time: Mon Aug 1 13:58:14 2011
    Mount count: 8
    Maximum mount count: 23
    Last checked: Mon Aug 1 07:23:24 2011
    Check interval: 15552000 (6 months)
    Next check after: Sat Jan 28 07:23:24 2012
    Reserved blocks uid: 0 (user root)
    Reserved blocks gid: 0 (group root)
    First inode: 11
    Inode size: 128
    Default directory hash: half_md4
    Directory Hash Seed: f5f22ff8-0cb1-4c30-a172-ead082f0ad8a
    dumpe2fs -h /dev/sda3
    dumpe2fs 1.41.14 (22-Dec-2010)
    Filesystem volume name: <none>
    Last mounted on: <not available>
    Filesystem UUID: c6ecf0fe-d2c4-4743-b639-1550295b65c6
    Filesystem magic number: 0xEF53
    Filesystem revision #: 1 (dynamic)
    Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery sparse_super large_file
    Filesystem flags: signed_directory_hash
    Default mount options: (none)
    Filesystem state: clean
    Errors behavior: Continue
    Filesystem OS type: Linux
    Inode count: 3203072
    Block count: 12801796
    Reserved block count: 640089
    Free blocks: 10487133
    Free inodes: 3000642
    First block: 0
    Block size: 4096
    Fragment size: 4096
    Reserved GDT blocks: 1020
    Blocks per group: 32768
    Fragments per group: 32768
    Inodes per group: 8192
    Inode blocks per group: 512
    Filesystem created: Fri Apr 30 20:35:51 2010
    Last mount time: Mon Aug 1 13:58:14 2011
    Last write time: Mon Aug 1 07:22:14 2011
    Mount count: 8
    Maximum mount count: 23
    Last checked: Mon Aug 1 07:22:14 2011
    Check interval: 15552000 (6 months)
    Next check after: Sat Jan 28 07:22:14 2012
    Reserved blocks uid: 0 (user root)
    Reserved blocks gid: 0 (group root)
    First inode: 11
    Inode size: 256
    Required extra isize: 28
    Desired extra isize: 28
    Journal inode: 8
    First orphan inode: 262152
    Default directory hash: half_md4
    Directory Hash Seed: 08e3f2db-7bb4-41fc-9364-9a9f637951ff
    Journal backup: inode blocks
    Journal features: journal_incompat_revoke
    Journal size: 128M
    Journal length: 32768
    Journal sequence: 0x0007df4e
    Journal start: 1
    dumpe2fs -h /dev/sda4
    dumpe2fs 1.41.14 (22-Dec-2010)
    Filesystem volume name: <none>
    Last mounted on: <not available>
    Filesystem UUID: ff7030b8-890a-4673-bd1c-f502ca5efb2b
    Filesystem magic number: 0xEF53
    Filesystem revision #: 1 (dynamic)
    Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery sparse_super large_file
    Filesystem flags: signed_directory_hash
    Default mount options: (none)
    Filesystem state: clean
    Errors behavior: Continue
    Filesystem OS type: Linux
    Inode count: 27303936
    Block count: 109201837
    Reserved block count: 5460091
    Free blocks: 80860937
    Free inodes: 27074933
    First block: 0
    Block size: 4096
    Fragment size: 4096
    Reserved GDT blocks: 997
    Blocks per group: 32768
    Fragments per group: 32768
    Inodes per group: 8192
    Inode blocks per group: 512
    Filesystem created: Fri Apr 30 20:36:07 2010
    Last mount time: Mon Aug 1 13:58:14 2011
    Last write time: Mon Aug 1 13:58:14 2011
    Mount count: 8
    Maximum mount count: 25
    Last checked: Mon Aug 1 07:23:25 2011
    Check interval: 15552000 (6 months)
    Next check after: Sat Jan 28 07:23:25 2012
    Reserved blocks uid: 0 (user root)
    Reserved blocks gid: 0 (group root)
    First inode: 11
    Inode size: 256
    Required extra isize: 28
    Desired extra isize: 28
    Journal inode: 8
    Default directory hash: half_md4
    Directory Hash Seed: e8dbb219-f7fe-4878-96b6-9137361ce1e2
    Journal backup: inode blocks
    Journal features: journal_incompat_revoke
    Journal size: 128M
    Journal length: 32768
    Journal sequence: 0x0011b560
    Journal start: 1
    Last edited by uxrs75 (2011-08-02 06:19:11)

  • Trying to resolve ntlmv errros mounting CIFS network shares via fstab

    Kernel: 3.4.2-2
    WM: Openbox
    About 6 months or so ago, which was after about a year on my current install with no issue, I began getting an ntlmv error when auto mounting samba shares at
    boot.  Everything still worked but I continued getting an error message.
    My fstab entry at that time looked like this:
    //<LAN_IP>/<share name>/ /mnt/Serverbox cifs credential=/path/to/file,file_mode=0777,dir_mode=0777 0 0
    The error I recieved looked like this:
    CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
    So I did what research I could on the error, found the "sec" option and discovered that adding the "sec=ntlmv2" option to my above noted fstab entry got
    rid of the error message and everything still worked perfectly; that is until this weekend.
    After upgrading both machines this weekend I noticed a new boot time error message and saw that my shares were no longer being mounted.
    relevant boot log:
    Mounting Network Filesystems [BUSY] mount error(22): Invalid argument
    Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
    relevant everything log:
    CIFS VFS: bad security option: ntlmv2
    /var/log/pacman from the the weekend's upgrade:
    [2012-06-16 13:03] Running 'pacman -Syu'
    [2012-06-16 13:03] synchronizing package lists
    [2012-06-16 13:03] starting full system upgrade
    [2012-06-16 13:10] removed dbus-python (1.0.0-1)
    [2012-06-16 13:10] upgraded linux-api-headers (3.3.2-1 -> 3.3.8-1)
    [2012-06-16 13:10] Generating locales...
    [2012-06-16 13:10] en_US.UTF-8... done
    [2012-06-16 13:10] en_US.ISO-8859-1... done
    [2012-06-16 13:10] Generation complete.
    [2012-06-16 13:10] upgraded glibc (2.15-10 -> 2.15-11)
    [2012-06-16 13:10] upgraded bison (2.5-3 -> 2.5.1-1)
    [2012-06-16 13:10] upgraded libpng (1.5.10-1 -> 1.5.11-1)
    [2012-06-16 13:10] upgraded cairo (1.12.2-1 -> 1.12.2-2)
    [2012-06-16 13:10] upgraded libwbclient (3.6.5-2 -> 3.6.5-3)
    [2012-06-16 13:10] upgraded cifs-utils (5.4-1 -> 5.5-1)
    [2012-06-16 13:10] upgraded sqlite (3.7.12.1-1 -> 3.7.13-1)
    [2012-06-16 13:10] upgraded colord (0.1.21-1 -> 0.1.21-2)
    [2012-06-16 13:10] installed pambase (20120602-1)
    [2012-06-16 13:10] upgraded pam (1.1.5-3 -> 1.1.5-4)
    [2012-06-16 13:10] upgraded libcups (1.5.3-4 -> 1.5.3-5)
    [2012-06-16 13:10] upgraded cups (1.5.3-4 -> 1.5.3-5)
    [2012-06-16 13:10] installed python-dbus-common (1.1.0-2)
    [2012-06-16 13:10] installed python2-dbus (1.1.0-2)
    [2012-06-16 13:10] upgraded dconf (0.12.1-1 -> 0.12.1-2)
    [2012-06-16 13:10] upgraded desktop-file-utils (0.19-1 -> 0.20-1)
    [2012-06-16 13:10] upgraded firefox (13.0-2 -> 13.0.1-1)
    [2012-06-16 13:10] upgraded freetype2 (2.4.9-2 -> 2.4.10-1)
    [2012-06-16 13:10] upgraded initscripts (2012.05.1-3 -> 2012.06.1-1)
    [2012-06-16 13:10] upgraded jre7-openjdk-headless (7.u4_2.2-1 -> 7.u5_2.2.1-1)
    [2012-06-16 13:10] upgraded jre7-openjdk (7.u4_2.2-1 -> 7.u5_2.2.1-1)
    [2012-06-16 13:10] upgraded jdk7-openjdk (7.u4_2.2-1 -> 7.u5_2.2.1-1)
    [2012-06-16 13:10] upgraded kdelibs (4.8.4-1 -> 4.8.4-2)
    [2012-06-16 13:10] upgraded libdrm (2.4.33-1 -> 2.4.35-1)
    [2012-06-16 13:10] upgraded libglapi (8.0.3-2 -> 8.0.3-3)
    [2012-06-16 13:10] upgraded liblrdf (0.4.0-9 -> 0.5.0-1)
    [2012-06-16 13:10] upgraded libmysqlclient (5.5.24-1 -> 5.5.25-1)
    [2012-06-16 13:10] installed khrplatform-devel (8.0.3-3)
    [2012-06-16 13:10] installed libegl (8.0.3-3)
    [2012-06-16 13:10] upgraded nvidia-utils (295.53-1 -> 295.59-1)
    [2012-06-16 13:10] upgraded libva (1.0.15-1 -> 1.1.0-1)
    [2012-06-16 13:10] upgraded mkinitcpio (0.9.1-1 -> 0.9.2-2)
    [2012-06-16 13:10] >>> Updating module dependencies. Please wait ...
    [2012-06-16 13:10] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-06-16 13:10] ==> Building image from preset: 'default'
    [2012-06-16 13:10] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-06-16 13:10] ==> Starting build: 3.4.2-2-ARCH
    [2012-06-16 13:10] -> Running build hook: [base]
    [2012-06-16 13:10] -> Running build hook: [udev]
    [2012-06-16 13:10] -> Running build hook: [autodetect]
    [2012-06-16 13:10] -> Running build hook: [pata]
    [2012-06-16 13:10] -> Running build hook: [scsi]
    [2012-06-16 13:10] -> Running build hook: [sata]
    [2012-06-16 13:10] -> Running build hook: [filesystems]
    [2012-06-16 13:10] -> Running build hook: [usbinput]
    [2012-06-16 13:10] -> Running build hook: [fsck]
    [2012-06-16 13:10] ==> Generating module dependencies
    [2012-06-16 13:10] ==> Creating xz initcpio image: /boot/initramfs-linux.img
    [2012-06-16 13:10] ==> Image generation successful
    [2012-06-16 13:10] ==> Building image from preset: 'fallback'
    [2012-06-16 13:10] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-06-16 13:10] ==> Starting build: 3.4.2-2-ARCH
    [2012-06-16 13:10] -> Running build hook: [base]
    [2012-06-16 13:10] -> Running build hook: [udev]
    [2012-06-16 13:10] -> Running build hook: [pata]
    [2012-06-16 13:10] -> Running build hook: [scsi]
    [2012-06-16 13:10] -> Running build hook: [sata]
    [2012-06-16 13:10] -> Running build hook: [filesystems]
    [2012-06-16 13:10] -> Running build hook: [usbinput]
    [2012-06-16 13:10] -> Running build hook: [fsck]
    [2012-06-16 13:10] ==> Generating module dependencies
    [2012-06-16 13:10] ==> Creating xz initcpio image: /boot/initramfs-linux-fallback.img
    [2012-06-16 13:11] ==> Image generation successful
    [2012-06-16 13:11] upgraded linux (3.3.8-1 -> 3.4.2-2)
    [2012-06-16 13:11] upgraded lirc-utils (1:0.9.0-16 -> 1:0.9.0-18)
    [2012-06-16 13:11] upgraded mesa (8.0.3-2 -> 8.0.3-3)
    [2012-06-16 13:11] upgraded mysql-clients (5.5.24-1 -> 5.5.25-1)
    [2012-06-16 13:11] upgraded mysql (5.5.24-1 -> 5.5.25-1)
    [2012-06-16 13:11] upgraded nvidia (295.53-1 -> 295.59-1)
    [2012-06-16 13:11] upgraded opencl-nvidia (295.53-1 -> 295.59-1)
    [2012-06-16 13:11] upgraded pango (1.30.0-1 -> 1.30.1-1)
    [2012-06-16 13:11] upgraded pcmanfm (0.9.10-1 -> 0.9.10-2)
    [2012-06-16 13:11] upgraded psmisc (22.16-1 -> 22.17-1)
    [2012-06-16 13:11] upgraded smbclient (3.6.5-2 -> 3.6.5-3)
    [2012-06-16 13:11] upgraded thunderbird (13.0-1 -> 13.0.1-1)
    [2012-06-16 13:11] upgraded udisks2 (1.94.0-1 -> 1.94.0-2)
    [2012-06-16 13:11] upgraded unrar (4.2.3-1 -> 4.2.4-1)
    [2012-06-16 13:11] upgraded virtualbox-archlinux-modules (4.1.16-1 -> 4.1.16-2)
    [2012-06-16 13:11] In order to use the new version, reload all virtualbox modules manually.
    [2012-06-16 13:11] upgraded virtualbox-modules (4.1.16-1 -> 4.1.16-2)
    [2012-06-16 13:11] upgraded xine-ui (0.99.6-5 -> 0.99.7-1)
    [2012-06-16 13:11] Running 'pacman -Syy'
    [2012-06-16 13:11] synchronizing package lists
    [2012-06-16 13:12] Running 'pacman -Syu'
    [2012-06-16 13:12] synchronizing package lists
    [2012-06-16 13:12] starting full system upgrade
    [2012-06-16 13:13] upgraded lib32-freetype2 (2.4.9-1 -> 2.4.10-1)
    [2012-06-16 13:13] upgraded lib32-gnutls (3.0.19-1 -> 3.0.20-1)
    [2012-06-16 13:13] upgraded lib32-krb5 (1.10.1-2 -> 1.10.2-1)
    [2012-06-16 13:13] upgraded lib32-libpng (1.5.10-2 -> 1.5.11-1)
    [2012-06-16 13:13] upgraded lib32-libx11 (1.4.99.902-1 -> 1.5.0-1)
    [2012-06-16 13:13] upgraded lib32-nvidia-utils (295.53-1 -> 295.59-1)
    [2012-06-16 13:13] upgraded lib32-sqlite3 (3.7.11-1 -> 3.7.13-1)
    [2012-06-16 13:13] upgraded lib32-util-linux (2.21.1-1 -> 2.21.2-1)
    [2012-06-16 13:13] upgraded lib32-xcb-util (0.3.8-1 -> 0.3.9-1)
    [2012-06-16 13:13] upgraded wine (1.5.5-1 -> 1.5.6-1)
    Currently returning to the old fstab entry once again gives the initial error code about the security mechanism being upgraded in kernal release x.x (it always seemed to change with each kernel change) though the shares seem to mount just fine. I've looked through the wiki, man pages on die.net and googled everything I can think of and I find a lot pages mentioning ntlmv errors with no solutions, many telling me that ntlmv and ntlmv2 are mount options, but nothing that gives me any indication on why I might be getting this error or how to go about looking for a solution.
    I've looked through the pacman logs on both my desktop and my file server that I'm connecting to in an effort to determine what might have changed and I found that:
    the smbclient had been upgraded on both machines so I tried downgrading back to version 3.6.5-2 but there was no change when rebooting.
    I also found cifs-utils had been upgraded on the file server.  So I downgraded that as well to the previous version (5.4-1), rebooted both machines and I'm still getting the same invalid arguement error.
    I've now gone back and upgraded to the most recent versions of the downgraded packages on each machine but I'm at a loss as to what my next steps should be.  Where do I go from here to track this down and determine if this is a bug or configuration error.  Is there a cleaner way of mounting these shares that I should be using instead of fstab?
    Thank you.

    I had the same issue. After upgrading kernel to 3.4.5 today the cifs share mounted with original fstab settings. I believe it was caused by this bug:
    kernel changelog wrote:    The double delimiter check that allows a comma in the password parsing code is
        unconditional. We set "tmp_end" to the end of the string and we continue to
        check for double delimiter. In the case where the password doesn't contain a
        comma we end up setting tmp_end to NULL and eventually setting "options" to
        "end". This results in the premature termination of the options string and hence
        the values of UNCip and UNC are being set to NULL. This results in mount failure
        with "Connecting to DFS root not implemented yet" error.

  • Mount.cifs does nothing

    When I run, as root:
    mount -t cifs //storage01.stevens.edu/public /media/storage01/public/ -o username=myuser workgroup=campus
    I get a password prompt. When I enter my password and press enter mount does nothing. It just hangs.
    Stranger yet, if I specify a password as an option I still get the password prompt.
    Any ideas?
    (I really want to get Mathematica 7 off my school's server!)
    Thanks

    One thing I noticed is that options following the -o flag should be comma separated rather than space separated.
    And man mount.cifs says to set the domain (workgroup) of the user by using domain=xxx.
    So perhaps:
    mount -t cifs //storage01.stevens.edu/public /media/storage01/public/ -o username=myuser,domain=campus
    Bob
    Last edited by Hrod beraht (2009-01-29 21:05:08)

  • Auto mount CIFS

    I know that there are many post and solutions regarding how to auto mount CIFS shares.... but for some reason I cannot get any of them to work.
    Here is what I know.
    1) I used to use fstab.  But not fstab requires root access to mount CIFS Shares
    2) I have tried smbnetfs as described here: [url= https://wiki.archlinux.org/index.php/sa … c_mounting ] Samba .  This results in extremely slow browsing to the network share and my credentials being denied.  It is possible that I have not set up the ~/.smb/smbnetfs.auth file correctly.  I also get the message:
    WARNING: Unkown libsmbclient version: 4.1.6
    SMBNetFS may not work as expected.
    3) I have tried autofs Autofs with no luck.
    4) I would be willing to mount from the terminal or a script file.  However, when I mount with
    sudo mount -t cifs //networkstorage/01_media  /home/user/Network/01_media -o username=xxxx,password=xxxxx
    I do not get rear/write privileges.
    5) I know the CIFS share is set up correctly.  Because if I brows to the share using thunar I can mount the location (with password and username) and get full read write access.
    Can anyone suggest what is the best method for mounting.  So that I can begin trying to fiqure out how to make it work for my system.  Or if I could get some advice on what I am doing wrong in the terminal so that I could get R/W privileges.
    Thanks!

    You tried the fstab, but you didn't specify what youactually put in the fstab.  There is an option which should enable you to mount the cifs filesystem as a normal user... it is the same option as any other filesystem.  Have a look at the mount man page, as it has the information you are looking for.
    I don't know what smbnetfs is or how one would use that, but from a quick gander at the package info it appears to be a fuse filesystem.  You also didn't give even a hint of what happened when you tried autofs, or in what way you failed.
    I think what you might really be looking for is an automounting daemon though.  I'm not sure how they work with network shares that require a password, but you might want to have a look.  This would be how the DEs handle automounting.  In particular, there is udev{,2} that seems to be the most common solution.

  • Loading Modules and Mounting Local Filesystems failed during boot

    Hi all,
    since 2-3 weeks I've had some FAIL during the boot (after having upgraded the system, I remember that there was involved an upgrade of init script probably, or something connected with the booting process).
    [gianluca@gianluca-laptop ~]$ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
    [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ba60000 (usable)
    [ 0.000000] BIOS-e820: 000000007ba60000 - 000000007babf000 (reserved)
    [ 0.000000] BIOS-e820: 000000007babf000 - 000000007bb80000 (usable)
    [ 0.000000] BIOS-e820: 000000007bb80000 - 000000007bbbf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007bbbf000 - 000000007bbe2000 (usable)
    [ 0.000000] BIOS-e820: 000000007bbe2000 - 000000007bbf7000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
    [ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Acer Aspire 1810TZ/JM11-MS, BIOS v1.3314 08/31/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-through
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask FC0000000 write-back
    [ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 2 base 040000000 mask FC0000000 write-back
    [ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
    [ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7b8a0000 - 7ba50000
    [ 0.000000] Allocated new RAMDISK: 3764e000 - 377fdbda
    [ 0.000000] Move RAMDISK from 000000007b8a0000 - 000000007ba4fbd9 to 3764e000 - 377fdbd9
    [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
    [ 0.000000] ACPI: XSDT 7bbf6120 0006C (v01 ACRSYS ACRPRDCT 00000001 01000013)
    [ 0.000000] ACPI: FACP 7bbf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: DSDT 7bbe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: FACS 7bb8d000 00040
    [ 0.000000] ACPI: DMAR 7bbf5000 00068 (v01 ? 00000001 00000000)
    [ 0.000000] ACPI: HPET 7bbf3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: APIC 7bbf2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: MCFG 7bbf1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: ASF! 7bbf0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: SLIC 7bbe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: BOOT 7bbe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
    [ 0.000000] ACPI: SSDT 7bbe2000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1092MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007bc00
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[5] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0007ba60
    [ 0.000000] 0: 0x0007babf -> 0x0007bb80
    [ 0.000000] 0: 0x0007bbbf -> 0x0007bbe2
    [ 0.000000] 0: 0x0007bbf7 -> 0x0007bc00
    [ 0.000000] On node 0 totalpages: 506587
    [ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f66d5200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2185 pages used for memmap
    [ 0.000000] HighMem zone: 277190 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502626
    [ 0.000000] Kernel command line: root=/dev/disk/by-uuid/2bef0cce-027d-44fa-a086-056c390cd847 ro quiet
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 8109824 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] ------------[ cut here ]------------
    [ 0.000000] WARNING: at drivers/pci/dmar.c:634 warn_invalid_dmar+0x98/0xb0()
    [ 0.000000] Hardware name: Aspire 1810TZ
    [ 0.000000] Your BIOS is broken; DMAR reported at address 0!
    [ 0.000000] BIOS vendor: INSYDE; Ver: v1.3314; Product Version: v1.3314
    [ 0.000000] Modules linked in:
    [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.39-ARCH #1
    [ 0.000000] Call Trace:
    [ 0.000000] [<c1046112>] warn_slowpath_common+0x72/0xa0
    [ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c11e3dd8>] ? warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c10461a2>] warn_slowpath_fmt_taint+0x32/0x40
    [ 0.000000] [<c11e3dd8>] warn_invalid_dmar+0x98/0xb0
    [ 0.000000] [<c14cba32>] check_zero_address+0x57/0x12b
    [ 0.000000] [<c12250cd>] ? acpi_get_table_with_size+0x59/0xb3
    [ 0.000000] [<c14cbb18>] detect_intel_iommu+0x12/0x78
    [ 0.000000] [<c14ad67e>] pci_iommu_alloc+0x35/0x5a
    [ 0.000000] [<c14b92c3>] mem_init+0xe/0x26d
    [ 0.000000] [<c14c3396>] ? __alloc_bootmem_node_nopanic+0x72/0x98
    [ 0.000000] [<c1342afc>] ? printk+0x1d/0x1f
    [ 0.000000] [<c14c5183>] ? page_cgroup_init_flatmem+0x8f/0xbc
    [ 0.000000] [<c14a85cc>] start_kernel+0x1a0/0x357
    [ 0.000000] [<c14a81bd>] ? loglevel+0x18/0x18
    [ 0.000000] [<c14a80b3>] i386_start_kernel+0xb3/0xb9
    [ 0.000000] ---[ end trace a7919e7f17c0a725 ]---
    [ 0.000000] Disabling lock debugging due to kernel taint
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007bc00)
    [ 0.000000] Memory: 1993572k/2027520k available (3376k kernel code, 32776k reserved, 1390k data, 512k init, 1117500k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
    [ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1296.656 MHz processor.
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.36 BogoMIPS (lpj=4322186)
    [ 0.003344] pid_max: default: 32768 minimum: 301
    [ 0.003415] Security Framework initialized
    [ 0.003422] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003458] Mount-cache hash table entries: 512
    [ 0.003763] Initializing cgroup subsys ns
    [ 0.003768] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.003772] Initializing cgroup subsys cpuacct
    [ 0.003793] Initializing cgroup subsys memory
    [ 0.003809] Initializing cgroup subsys devices
    [ 0.003813] Initializing cgroup subsys freezer
    [ 0.003816] Initializing cgroup subsys net_cls
    [ 0.003819] Initializing cgroup subsys blkio
    [ 0.003876] CPU: Physical Processor ID: 0
    [ 0.003879] CPU: Processor Core ID: 0
    [ 0.003883] mce: CPU supports 6 MCE banks
    [ 0.003894] CPU0: Thermal monitoring enabled (TM2)
    [ 0.003899] using mwait in idle threads.
    [ 0.005672] ACPI: Core revision 20110316
    [ 0.016682] ftrace: allocating 15225 entries in 30 pages
    [ 0.020059] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.023598] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056606] CPU0: Genuine Intel(R) CPU U4100 @ 1.30GHz stepping 0a
    [ 0.056663] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.056663] ... version: 2
    [ 0.056663] ... bit width: 40
    [ 0.056663] ... generic registers: 2
    [ 0.056663] ... value mask: 000000ffffffffff
    [ 0.056663] ... max period: 000000007fffffff
    [ 0.056663] ... fixed-purpose events: 3
    [ 0.056663] ... event mask: 0000000700000003
    [ 0.073511] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.100013] CPU 1 irqstacks, hard=f54f6000 soft=f54f8000
    [ 0.100017] Booting Node 0, Processors #1
    [ 0.100021] smpboot cpu 1: start_ip = 9a000
    [ 0.006666] Initializing CPU#1
    [ 0.196688] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.203327] Brought up 2 CPUs
    [ 0.203331] Total of 2 processors activated (5188.93 BogoMIPS).
    [ 0.204780] devtmpfs: initialized
    [ 0.204780] PM: Registering ACPI NVS region at 7bb80000 (258048 bytes)
    [ 0.206812] print_constraints: dummy:
    [ 0.206898] NET: Registered protocol family 16
    [ 0.207056] ACPI: bus type pci registered
    [ 0.207200] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.207205] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.207209] PCI: Using MMCONFIG for extended config space
    [ 0.207212] PCI: Using configuration type 1 for base access
    [ 0.207951] bio: create slab <bio-0> at 0
    [ 0.211250] ACPI: EC: Look up EC in DSDT
    [ 0.214102] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.217442] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.218088] ACPI: SSDT 7ba6fc98 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.218783] ACPI: Dynamic OEM Table Load:
    [ 0.218788] ACPI: SSDT (null) 001E1 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.219036] ACPI: SSDT 7ba6d598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.219702] ACPI: Dynamic OEM Table Load:
    [ 0.219706] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.237115] ACPI: SSDT 7ba6ee18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.237838] ACPI: Dynamic OEM Table Load:
    [ 0.237843] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.246829] ACPI: SSDT 7ba6ff18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.247515] ACPI: Dynamic OEM Table Load:
    [ 0.247520] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.257074] ACPI: Interpreter enabled
    [ 0.257081] ACPI: (supports S0 S3 S4 S5)
    [ 0.257124] ACPI: Using IOAPIC for interrupt routing
    [ 0.265711] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
    [ 0.265982] ACPI: No dock devices found.
    [ 0.265985] HEST: Table not found.
    [ 0.265991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.266509] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.267544] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.267549] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.267553] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.267560] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
    [ 0.267579] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
    [ 0.267613] DMAR: Forcing write-buffer flush capability
    [ 0.267616] DMAR: Disabling IOMMU for graphics on this chipset
    [ 0.267647] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
    [ 0.267668] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
    [ 0.267681] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.267691] pci 0000:00:02.0: reg 20: [io 0x30d0-0x30d7]
    [ 0.267738] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
    [ 0.267756] pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
    [ 0.267863] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
    [ 0.267945] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
    [ 0.268041] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
    [ 0.272125] pci 0000:00:1a.7: reg 10: [mem 0x94504c00-0x94504fff]
    [ 0.296690] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.296698] pci 0000:00:1a.7: PME# disabled
    [ 0.296734] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
    [ 0.296759] pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
    [ 0.296845] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.296852] pci 0000:00:1b.0: PME# disabled
    [ 0.296883] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
    [ 0.296968] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.296974] pci 0000:00:1c.0: PME# disabled
    [ 0.297011] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
    [ 0.297098] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.297105] pci 0000:00:1c.3: PME# disabled
    [ 0.297148] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
    [ 0.297230] pci 0000:00:1d.0: reg 20: [io 0x3080-0x309f]
    [ 0.297313] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
    [ 0.297391] pci 0000:00:1d.1: reg 20: [io 0x3060-0x307f]
    [ 0.297471] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
    [ 0.297552] pci 0000:00:1d.2: reg 20: [io 0x3040-0x305f]
    [ 0.297646] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
    [ 0.302125] pci 0000:00:1d.7: reg 10: [mem 0x94504800-0x94504bff]
    [ 0.328820] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.328828] pci 0000:00:1d.7: PME# disabled
    [ 0.328858] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 0.328949] pci 0000:00:1f.0: [8086:2917] type 0 class 0x000601
    [ 0.329112] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
    [ 0.329145] pci 0000:00:1f.2: reg 10: [io 0x30c8-0x30cf]
    [ 0.329159] pci 0000:00:1f.2: reg 14: [io 0x30dc-0x30df]
    [ 0.329172] pci 0000:00:1f.2: reg 18: [io 0x30c0-0x30c7]
    [ 0.329185] pci 0000:00:1f.2: reg 1c: [io 0x30d8-0x30db]
    [ 0.329199] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
    [ 0.329212] pci 0000:00:1f.2: reg 24: [mem 0x94504000-0x945047ff]
    [ 0.329268] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.329274] pci 0000:00:1f.2: PME# disabled
    [ 0.329302] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
    [ 0.329328] pci 0000:00:1f.3: reg 10: [mem 0x94505000-0x945050ff 64bit]
    [ 0.329362] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
    [ 0.329486] pci 0000:01:00.0: [1969:1063] type 0 class 0x000200
    [ 0.329519] pci 0000:01:00.0: reg 10: [mem 0x93500000-0x9353ffff 64bit]
    [ 0.329537] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f]
    [ 0.329645] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.329653] pci 0000:01:00.0: PME# disabled
    [ 0.333336] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.333343] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.333349] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
    [ 0.333360] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.333454] pci 0000:02:00.0: [8086:0083] type 0 class 0x000280
    [ 0.333498] pci 0000:02:00.0: reg 10: [mem 0x92500000-0x92501fff 64bit]
    [ 0.333662] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.333671] pci 0000:02:00.0: PME# disabled
    [ 0.340004] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.340011] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
    [ 0.340018] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
    [ 0.340028] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.340121] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.340128] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.340135] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.340145] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.340150] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.340154] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.340158] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.340163] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
    [ 0.340186] pci_bus 0000:00: on NUMA node 0
    [ 0.340192] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.340631] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    [ 0.340734] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
    [ 0.340832] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.340835] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.348405] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348504] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348599] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.348693] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.348788] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.348886] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
    [ 0.348981] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.349075] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.349214] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.349232] vgaarb: loaded
    [ 0.349386] PCI: Using ACPI for IRQ routing
    [ 0.349389] PCI: pci_cache_line_size set to 64 bytes
    [ 0.349500] reserve RAM buffer: 000000000009e000 - 000000000009ffff
    [ 0.349504] reserve RAM buffer: 000000007ba60000 - 000000007bffffff
    [ 0.349510] reserve RAM buffer: 000000007bb80000 - 000000007bffffff
    [ 0.349514] reserve RAM buffer: 000000007bbe2000 - 000000007bffffff
    [ 0.349518] reserve RAM buffer: 000000007bc00000 - 000000007bffffff
    [ 0.349695] NetLabel: Initializing
    [ 0.349698] NetLabel: domain hash size = 128
    [ 0.349700] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.349720] NetLabel: unlabeled traffic allowed by default
    [ 0.349740] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.349748] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.349756] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.359999] Switching to clocksource hpet
    [ 0.363178] Switched to NOHz mode on CPU #0
    [ 0.363276] Switched to NOHz mode on CPU #1
    [ 0.370116] pnp: PnP ACPI init
    [ 0.370143] ACPI: bus type pnp registered
    [ 0.370722] pnp 00:00: [bus 00-ff]
    [ 0.370727] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.370731] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.370735] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.370739] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.370743] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.370747] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.370751] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.370755] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.370759] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.370763] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.370767] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.370770] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.370774] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.370778] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.370782] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.370786] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.370790] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.370794] pnp 00:00: [mem 0x80000000-0xfebfffff window]
    [ 0.370798] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.370911] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.371140] pnp 00:01: [io 0x002e-0x002f]
    [ 0.371144] pnp 00:01: [io 0x004e-0x004f]
    [ 0.371148] pnp 00:01: [io 0x164e-0x164f]
    [ 0.371151] pnp 00:01: [io 0x0061]
    [ 0.371154] pnp 00:01: [io 0x0070]
    [ 0.371157] pnp 00:01: [io 0x0080]
    [ 0.371160] pnp 00:01: [io 0x0092]
    [ 0.371163] pnp 00:01: [io 0x00b2-0x00b3]
    [ 0.371167] pnp 00:01: [io 0x0063]
    [ 0.371170] pnp 00:01: [io 0x0065]
    [ 0.371173] pnp 00:01: [io 0x0067]
    [ 0.371176] pnp 00:01: [io 0x0600-0x060f]
    [ 0.371180] pnp 00:01: [io 0x0610]
    [ 0.371183] pnp 00:01: [io 0x0800-0x080f]
    [ 0.371186] pnp 00:01: [io 0x0810-0x0817]
    [ 0.371190] pnp 00:01: [io 0x0820-0x0823]
    [ 0.371193] pnp 00:01: [io 0x0400-0x047f]
    [ 0.371196] pnp 00:01: [io 0x0500-0x053f]
    [ 0.371200] pnp 00:01: [mem 0xf8000000-0xfbffffff]
    [ 0.371203] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
    [ 0.371211] pnp 00:01: [mem 0xfed10000-0xfed13fff]
    [ 0.371215] pnp 00:01: [mem 0xfed18000-0xfed18fff]
    [ 0.371218] pnp 00:01: [mem 0xfed19000-0xfed19fff]
    [ 0.371222] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [ 0.371225] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
    [ 0.371229] pnp 00:01: [mem 0xfed40000-0xfed44fff]
    [ 0.371232] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
    [ 0.371236] pnp 00:01: [mem 0xfee00000-0xfee00fff]
    [ 0.371273] pnp 00:01: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io 0x1000-0x1fff]
    [ 0.371372] system 00:01: [io 0x0600-0x060f] has been reserved
    [ 0.371377] system 00:01: [io 0x0610] has been reserved
    [ 0.371381] system 00:01: [io 0x0800-0x080f] has been reserved
    [ 0.371386] system 00:01: [io 0x0810-0x0817] has been reserved
    [ 0.371390] system 00:01: [io 0x0820-0x0823] has been reserved
    [ 0.371394] system 00:01: [io 0x0400-0x047f] has been reserved
    [ 0.371399] system 00:01: [io 0x0500-0x053f] has been reserved
    [ 0.371405] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.371410] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.371414] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.371419] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.371424] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.371429] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.371434] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.371438] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.371443] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.371448] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.371453] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.371471] pnp 00:02: [io 0x0000-0x001f]
    [ 0.371474] pnp 00:02: [io 0x0081-0x0091]
    [ 0.371478] pnp 00:02: [io 0x0093-0x009f]
    [ 0.371481] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.371485] pnp 00:02: [dma 4]
    [ 0.371537] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.371576] pnp 00:03: [io 0x0070-0x0077]
    [ 0.371630] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.371735] pnp 00:04: [irq 0 disabled]
    [ 0.371750] pnp 00:04: [irq 8]
    [ 0.371753] pnp 00:04: [mem 0xfed00000-0xfed003ff]
    [ 0.371809] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.371828] pnp 00:05: [io 0x00f0]
    [ 0.371835] pnp 00:05: [irq 13]
    [ 0.371889] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.371907] pnp 00:06: [mem 0xff800000-0xffffffff]
    [ 0.371965] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.371991] pnp 00:07: [io 0x0060]
    [ 0.371995] pnp 00:07: [io 0x0064]
    [ 0.372003] pnp 00:07: [irq 1]
    [ 0.372061] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.372090] pnp 00:08: [irq 12]
    [ 0.372150] pnp 00:08: Plug and Play ACPI device, IDs SYN1b20 PNP0f13 (active)
    [ 0.372300] pnp: PnP ACPI: found 9 devices
    [ 0.372303] ACPI: ACPI bus type pnp unregistered
    [ 0.409749] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
    [ 0.409755] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.409764] pci 0000:00:1c.0: bridge window [mem 0x93500000-0x944fffff]
    [ 0.409772] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.409782] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
    [ 0.409787] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
    [ 0.409795] pci 0000:00:1c.3: bridge window [mem 0x92500000-0x934fffff]
    [ 0.409802] pci 0000:00:1c.3: bridge window [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.409812] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
    [ 0.409815] pci 0000:00:1e.0: bridge window [io disabled]
    [ 0.409823] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 0.409829] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.409853] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.409861] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.409875] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 0.409881] pci 0000:00:1c.3: setting latency timer to 64
    [ 0.409891] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.409897] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.409901] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.409905] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.409909] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.409914] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.409918] pci_bus 0000:01: resource 1 [mem 0x93500000-0x944fffff]
    [ 0.409922] pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
    [ 0.409927] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    [ 0.409931] pci_bus 0000:02: resource 1 [mem 0x92500000-0x934fffff]
    [ 0.409935] pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
    [ 0.409940] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.409943] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.409947] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.409952] pci_bus 0000:03: resource 7 [mem 0x80000000-0xfebfffff]
    [ 0.410023] NET: Registered protocol family 2
    [ 0.410132] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.410465] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.411087] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.411362] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.411366] TCP reno registered
    [ 0.411370] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.411381] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.411559] NET: Registered protocol family 1
    [ 0.411580] pci 0000:00:02.0: Boot video device
    [ 0.440052] PCI: CLS 64 bytes, default 64
    [ 0.440120] Unpacking initramfs...
    [ 0.493687] Freeing initrd memory: 1728k freed
    [ 0.494435] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
    [ 0.494439] Simple Boot Flag at 0x44 set to 0x1
    [ 0.494754] apm: BIOS not found.
    [ 0.494943] audit: initializing netlink socket (disabled)
    [ 0.494958] type=2000 audit(1312551622.493:1): initialized
    [ 0.495391] highmem bounce pool size: 64 pages
    [ 0.495398] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.498715] VFS: Disk quotas dquot_6.5.2
    [ 0.498846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.499018] msgmni has been set to 1714
    [ 0.499314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.499357] io scheduler noop registered
    [ 0.499361] io scheduler deadline registered
    [ 0.499380] io scheduler cfq registered (default)
    [ 0.499553] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.499624] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.499729] pcieport 0000:00:1c.3: setting latency timer to 64
    [ 0.499792] pcieport 0000:00:1c.3: irq 41 for MSI/MSI-X
    [ 0.500070] intel_idle: MWAIT substates: 0x22220
    [ 0.500074] intel_idle: does not run on family 6 model 23
    [ 0.500082] ERST: Table is not found!
    [ 0.500103] isapnp: Scanning for PnP cards...
    [ 0.857044] isapnp: No Plug & Play device found
    [ 0.857122] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.060716] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
    [ 1.068400] i8042: Detected active multiplexing controller, rev 1.1
    [ 1.071789] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.071804] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [ 1.071809] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [ 1.071813] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [ 1.071818] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [ 1.072099] mousedev: PS/2 mouse device common for all mice
    [ 1.072185] rtc_cmos 00:03: RTC can wake from S4
    [ 1.086817] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 1.086852] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.086887] cpuidle: using governor ladder
    [ 1.086890] cpuidle: using governor menu
    [ 1.087261] TCP cubic registered
    [ 1.087265] NET: Registered protocol family 17
    [ 1.087276] Registering the dns_resolver key type
    [ 1.087307] Using IPI No-Shortcut mode
    [ 1.087437] PM: Hibernation image not present or could not be loaded.
    [ 1.087445] registered taskstats version 1
    [ 1.087957] rtc_cmos 00:03: setting system clock to 2011-08-05 13:40:23 UTC (1312551623)
    [ 1.088039] Initializing network drop monitor service
    [ 1.088128] Freeing unused kernel memory: 512k freed
    [ 1.088469] Write protecting the kernel text: 3380k
    [ 1.088507] Write protecting the kernel read-only data: 1028k
    [ 1.093885] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.106227] udevd[54]: starting version 171
    [ 1.236052] SCSI subsystem initialized
    [ 1.269724] libata version 3.00 loaded.
    [ 1.282619] ahci 0000:00:1f.2: version 3.0
    [ 1.282637] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.282703] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 1.282767] ahci: SSS flag set, parallel bus scan disabled
    [ 1.282814] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 1.282820] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led pmp pio slum part ccc ems
    [ 1.282828] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.301035] scsi0 : ahci
    [ 1.301194] scsi1 : ahci
    [ 1.301318] scsi2 : ahci
    [ 1.301438] scsi3 : ahci
    [ 1.301557] scsi4 : ahci
    [ 1.301679] scsi5 : ahci
    [ 1.301772] ata1: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504100 irq 42
    [ 1.301778] ata2: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504180 irq 42
    [ 1.301782] ata3: DUMMY
    [ 1.301784] ata4: DUMMY
    [ 1.301788] ata5: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504300 irq 42
    [ 1.301793] ata6: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504380 irq 42
    [ 1.496710] Refined TSC clocksource calibration: 1296.749 MHz.
    [ 1.496717] Switching to clocksource tsc
    [ 1.786699] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.787736] ata1.00: ATA-8: Hitachi HTS543225L9A300, FBEOC40C, max UDMA/133
    [ 1.787741] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.788946] ata1.00: configured for UDMA/133
    [ 1.789123] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54322 FBEO PQ: 0 ANSI: 5
    [ 2.106690] ata2: SATA link down (SStatus 0 SControl 300)
    [ 2.426689] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.746690] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.760584] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 2.760671] sd 0:0:0:0: [sda] Write Protect is off
    [ 2.760676] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.760709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.798506] sda: sda1 sda2 sda3 sda4
    [ 2.799028] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 3.310879] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.653828] udevd[228]: starting version 173
    [ 4.958869] ACPI: acpi_idle registered with cpuidle
    [ 4.959125] Monitor-Mwait will be used to enter C-1 state
    [ 4.959159] Monitor-Mwait will be used to enter C-2 state
    [ 4.959167] Marking TSC unstable due to TSC halts in idle
    [ 4.959208] Switching to clocksource hpet
    [ 5.052561] fuse init (API version 7.16)
    [ 5.094399] acerhdf: Acer Aspire One Fan driver, v.0.5.24
    [ 5.094431] acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1810TZ/v1.3314, please report, aborting!
    [ 5.377790] Linux agpgart interface v0.103
    [ 5.381930] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.382452] ACPI: AC Adapter [ACAD] (off-line)
    [ 5.389644] wmi: Mapper loaded
    [ 5.390172] iTCO_vendor_support: vendor-support=0
    [ 5.532413] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 5.532424] ACPI: Power Button [PWRB]
    [ 5.532507] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 5.548014] acer_wmi: Acer Laptop ACPI-WMI Extras
    [ 5.550648] acer_wmi: Brightness must be controlled by generic video driver
    [ 5.554953] ACPI: Lid Switch [LID0]
    [ 5.555062] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 5.555072] ACPI: Sleep Button [SLPB]
    [ 5.555166] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 5.555173] ACPI: Power Button [PWRF]
    [ 5.560994] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 5.569140] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 5.569153] ACPI: Battery Slot [BAT1] (battery present)
    [ 5.570951] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 5.573564] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
    [ 5.573653] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 5.602755] usbcore: registered new interface driver usbfs
    [ 5.602793] usbcore: registered new interface driver hub
    [ 5.606733] usbcore: registered new device driver usb
    [ 5.623405] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 5.659329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 5.659373] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 5.659401] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 5.659407] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 5.659455] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 5.670065] ehci_hcd 0000:00:1a.7: debug port 1
    [ 5.673944] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 5.673971] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94504c00
    [ 5.690924] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 5.691336] hub 1-0:1.0: USB hub found
    [ 5.691345] hub 1-0:1.0: 2 ports detected
    [ 5.691477] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 5.691508] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 5.691514] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 5.691528] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 5.702271] cfg80211: Calling CRDA to update world regulatory domain
    [ 5.706752] ehci_hcd 0000:00:1d.7: debug port 1
    [ 5.710655] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 5.710683] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94504800
    [ 5.723379] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 5.723603] hub 2-0:1.0: USB hub found
    [ 5.723610] hub 2-0:1.0: 6 ports detected
    [ 5.724256] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 5.724463] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 5.725927] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
    [ 5.726502] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
    [ 5.802604] uhci_hcd: USB Universal Host Controller Interface driver
    [ 5.802687] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.802702] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 5.802709] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 5.802732] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 5.813675] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
    [ 5.814571] hub 3-0:1.0: USB hub found
    [ 5.814580] hub 3-0:1.0: 2 ports detected
    [ 5.814712] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 5.814725] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 5.814730] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 5.814748] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 5.823482] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
    [ 5.824221] hub 4-0:1.0: USB hub found
    [ 5.824230] hub 4-0:1.0: 2 ports detected
    [ 5.824360] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 5.824373] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 5.824378] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 5.824392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
    [ 5.836745] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
    [ 5.836988] hub 5-0:1.0: USB hub found
    [ 5.836995] hub 5-0:1.0: 2 ports detected
    [ 5.837118] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
    [ 5.837130] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 5.837135] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 5.837148] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
    [ 5.846757] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040
    [ 5.846997] hub 6-0:1.0: USB hub found
    [ 5.847004] hub 6-0:1.0: 2 ports detected
    [ 5.869833] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 5.909784] [drm] Initialized drm 1.1.0 20060810
    [ 5.926221] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 5.926238] atl1c 0000:01:00.0: setting latency timer to 64
    [ 6.014499] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
    [ 6.022590] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 6.022599] i915 0000:00:02.0: setting latency timer to 64
    [ 6.033370] usb 2-5: new high speed USB device number 2 using ehci_hcd
    [ 6.045183] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 6.045188] iwlagn: Copyright(c) 2003-2010 Intel Corporation
    [ 6.045269] iwlagn 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 6.045281] iwlagn 0000:02:00.0: setting latency timer to 64
    [ 6.045314] iwlagn 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
    [ 6.066230] iwlagn 0000:02:00.0: device EEPROM VER=0x15d, CALIB=0x6
    [ 6.066236] iwlagn 0000:02:00.0: Device SKU: 0X9
    [ 6.066240] iwlagn 0000:02:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
    [ 6.066261] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
    [ 6.066513] iwlagn 0000:02:00.0: irq 43 for MSI/MSI-X
    [ 6.071614] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 6.071623] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 6.071626] [drm] Driver supports precise vblank timestamp query.
    [ 6.167372] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 6.236519] iwlagn 0000:02:00.0: loaded firmware version 39.31.5.1 build 35138
    [ 6.236889] Registered led device: phy0-led
    [ 6.309104] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [ 6.435863] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    [ 6.480908] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input6
    [ 6.507822] Linux media interface: v0.10
    [ 6.580021] Linux video capture interface: v2.00
    [ 6.591629] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
    [ 6.608274] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
    [ 6.608368] usbcore: registered new interface driver uvcvideo
    [ 6.608371] USB Video Class driver (v1.0.0)
    [ 6.624890] fbcon: inteldrmfb (fb0) is primary device
    [ 6.671041] Console: switching to colour frame buffer device 170x48
    [ 6.678170] fb0: inteldrmfb frame buffer device
    [ 6.678173] drm: registered panic notifier
    [ 6.679734] acpi device:03: registered as cooling_device2
    [ 6.679988] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input8
    [ 6.680104] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
    [ 6.680793] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 6.680840] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 6.680937] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 6.680975] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 6.802470] hda_codec: ALC269: BIOS auto-probing.
    [ 6.803832] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
    [ 6.833736] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 6.833855] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 8.406870] EXT4-fs (sda3): re-mounted. Opts: (null)
    [ 8.676079] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 8.886041] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    [ 12.277210] atl1c 0000:01:00.0: irq 46 for MSI/MSI-X
    [ 12.600410] /dev/vmmon[897]: Module vmmon: registered with major=10 minor=165
    [ 12.600421] /dev/vmmon[897]: Module vmmon: initialized
    [ 12.646908] /dev/vmci[905]: VMCI: Driver initialized.
    [ 12.647204] /dev/vmci[905]: Module vmci: registered with major=10 minor=58
    [ 12.647209] /dev/vmci[905]: Module vmci: initialized
    [ 12.827251] ppdev: user-space parallel port driver
    [ 13.786476] /dev/vmnet: open called by PID 979 (vmnet-dhcpd)
    [ 13.786488] /dev/vmnet: hub 1 does not exist, allocating memory.
    [ 13.786521] /dev/vmnet: port on hub 1 successfully opened
    [ 13.801438] /dev/vmnet: open called by PID 981 (vmnet-netifup)
    [ 13.801452] /dev/vmnet: port on hub 1 successfully opened
    [ 13.854670] /dev/vmnet: open called by PID 983 (vmnet-dhcpd)
    [ 13.854683] /dev/vmnet: hub 8 does not exist, allocating memory.
    [ 13.854720] /dev/vmnet: port on hub 8 successfully opened
    [ 13.915864] /dev/vmnet: open called by PID 987 (vmnet-natd)
    [ 13.915881] /dev/vmnet: port on hub 8 successfully opened
    [ 13.936302] /dev/vmnet: open called by PID 988 (vmnet-netifup)
    [ 13.936317] /dev/vmnet: port on hub 8 successfully opened
    [ 38.702663] NET: Registered protocol family 10
    [ 38.704338] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 38.704788] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 39.752832] EXT4-fs (sda3): re-mounted. Opts: commit=600
    [ 40.413933] EXT4-fs (sda4): re-mounted. Opts: commit=600
    [ 48.976756] vmnet8: no IPv6 routers present
    [ 49.523376] vmnet1: no IPv6 routers present
    [ 105.125369] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
    [ 105.127031] wlan0: authenticated
    [ 105.137382] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
    [ 105.140390] wlan0: RX AssocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
    [ 105.140396] wlan0: associated
    [ 105.144018] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 105.447100] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 105.447115] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 105.447150] /dev/vmnet: port on hub 0 successfully opened
    [ 105.447175] bridge-wlan0: device is wireless, enabling SMAC
    [ 105.447181] bridge-wlan0: up
    [ 105.448675] bridge-wlan0: attached
    [ 107.324643] wlan0: deauthenticating from 00:15:e9:27:b5:38 by local choice (reason=3)
    [ 107.400201] cfg80211: Calling CRDA to update world regulatory domain
    [ 107.423712] bridge-wlan0: disabling the bridge
    [ 107.440034] bridge-wlan0: down
    [ 107.440043] bridge-wlan0: detached
    [ 107.440111] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 107.440124] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 107.440157] /dev/vmnet: port on hub 0 successfully opened
    [ 107.440172] bridge-wlan0: device is wireless, enabling SMAC
    [ 107.440177] bridge-wlan0: up
    [ 107.440182] bridge-wlan0: attached
    [ 107.860411] bridge-wlan0: disabling the bridge
    [ 107.869871] wlan0: authenticate with 00:15:e9:27:b5:38 (try 1)
    [ 107.872071] wlan0: authenticated
    [ 107.872466] wlan0: associate with 00:15:e9:27:b5:38 (try 1)
    [ 107.875411] wlan0: RX ReassocResp from 00:15:e9:27:b5:38 (capab=0x471 status=0 aid=1)
    [ 107.875417] wlan0: associated
    [ 107.876696] bridge-wlan0: down
    [ 107.876705] bridge-wlan0: detached
    [ 107.904358] /dev/vmnet: open called by PID 971 (vmnet-bridge)
    [ 107.904374] /dev/vmnet: hub 0 does not exist, allocating memory.
    [ 107.904409] /dev/vmnet: port on hub 0 successfully opened
    [ 107.904423] bridge-wlan0: device is wireless, enabling SMAC
    [ 107.904428] bridge-wlan0: up
    [ 107.905917] bridge-wlan0: attached
    [ 118.910106] wlan0: no IPv6 routers present
    This is the output of /var/log/boot
    Fri Aug 5 15:40:30 2011: :: Adjusting system time and setting kernel timezone ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Starting UDev Daemon ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Triggering UDev uevents ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Loading Modules ^[[71G [BUSY] ^[[71G [FAIL]
    Fri Aug 5 15:40:30 2011: :: Waiting for UDev uevents to be processed ^[[71G [BUSY] ^[[71G [DONE]
    Fri Aug 5 15:40:30 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190178/480496 files, 1530694/1921775 blocks
    Fri Aug 5 15:40:30 2011: /dev/sda4: clean, 49123/14761984 files, 38814365/59034858 blocks
    Fri Aug 5 15:40:30 2011: /dev/sda1: clean, 30/26104 files, 19115/104388 blocks
    Fri Aug 5 15:40:30 2011: ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:30 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
    Fri Aug 5 15:40:31 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:31 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: INIT: Entering runlevel: 5
    Fri Aug 5 15:40:32 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:32 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:33 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: :: Restoring ALSA Levels ^[[161G [BUSY] ^[[161G [DONE]
    Fri Aug 5 15:40:34 2011: Starting VMware services:
    Fri Aug 5 15:40:34 2011: VMware USB Arbitrator^[[71G done
    Fri Aug 5 15:40:34 2011: Virtual machine monitor^[[71G done
    Fri Aug 5 15:40:35 2011: Virtual machine communication interface^[[71G done
    Fri Aug 5 15:40:35 2011: VM communication interface socket family^[[71G done
    Fri Aug 5 15:40:35 2011: Blocking file system^[[71G done
    Fri Aug 5 15:40:35 2011: Virtual ethernet^[[71G done
    Fri Aug 5 15:40:36 2011: Shared Memory Available^[[71G done
    Fri Aug 5 15:40:36 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
    What could be the problem?
    Thanks

    Wed Aug 10 08:49:11 2011: :: Adjusting system time and setting kernel timezone ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Starting UDev Daemon ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Triggering UDev uevents ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Loading Modules ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Waiting for UDev uevents to be processed ^[[119G [BUSY] ^[[119G [DONE]
    Wed Aug 10 08:49:11 2011: :: Bringing up loopback interface ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Checking Filesystems ^[[161G [BUSY] /dev/sda3: clean, 190755/480496 files, 1567027/1921775 blocks
    Wed Aug 10 08:49:11 2011: /dev/sda4: clean, 39914/14761984 files, 39001242/59034858 blocks
    Wed Aug 10 08:49:11 2011: /dev/sda1: clean, 29/26104 files, 19024/104388 blocks
    Wed Aug 10 08:49:11 2011: ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Remounting Root Read/Write ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Creating mtab ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Mounting Local Filesystems ^[[161G [BUSY] ^[[161G [FAIL]
    Wed Aug 10 08:49:11 2011: :: Activating Swap ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Configuring Time Zone ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Initializing Random Seed ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:11 2011: :: Removing Leftover Files ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Hostname: gianluca-laptop ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Locale: en_GB.UTF-8 ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Setting Consoles to UTF-8 mode ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Loading Keyboard Map: it ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: :: Saving dmesg Log ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:12 2011: INIT: Entering runlevel: 5
    Wed Aug 10 08:49:12 2011: :: Starting Syslog-NG ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:13 2011: :: Starting D-BUS system messagebus ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:13 2011: :: Starting Avahi mDNS/DNS-SD Daemon ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Starting NetworkManager ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Mounting Network Filesystems ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Starting crond daemon ^[[161G [BUSY] ^[[161G [DONE]
    Wed Aug 10 08:49:14 2011: :: Restoring ALSA Levels ^[[161G [BUSY] Found hardware: "HDA-Intel" "Intel Cantiga HDMI" "HDA:10ec0269,1025029b,00100004 HDA:80862802,80860101,001000
    Wed Aug 10 08:49:14 2011: Hardware is initialized using a generic method
    Wed Aug 10 08:49:14 2011: ^[[161G [FAIL]
    Wed Aug 10 08:49:15 2011: Starting VMware services:
    Wed Aug 10 08:49:15 2011: VMware USB Arbitrator^[[71G done
    Wed Aug 10 08:49:15 2011: Virtual machine monitor^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Virtual machine communication interface^[[71Gfailed
    Wed Aug 10 08:49:15 2011: VM communication interface socket family^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Blocking file system^[[71Gfailed
    Wed Aug 10 08:49:15 2011: Virtual ethernet^[[71Gfailed
    Wed Aug 10 08:49:15 2011: :: Starting Up Sensors ^[[161G [BUSY] ^[[161G [DONE]
    Ok, I still have that fail during the 'Mounting Local Filesystems'.
    If there isn't the swap partition it should be something else from my fstab..
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    devpts /dev/pts devpts defaults 0 0
    shm /dev/shm tmpfs nodev,nosuid 0 0
    UUID=1b52b0c4-5b56-4bee-8966-65bcaffbf2ee /home ext4 defaults 0 1
    UUID=22475d68-29e5-4a22-8942-38cb30110d30 swap swap defaults 0 0
    UUID=2bef0cce-027d-44fa-a086-056c390cd847 / ext4 defaults 0 1
    UUID=59d811ed-2920-45c1-a5cc-e0675e212721 /boot ext2 defaults 0 1
    UUID=325220A852207331 /media/MyPassport ntfs defaults,nofail 0 2
    UUID=FDC0-6FEA /media/CowonIvana auto defaults,nofail 0 2
    UUID=7AEB-F44F /media/CentralEurope auto defaults,nofail 0 2
    UUID=287B-C290 /media/CowonGian auto defaults,nofail 0 2
    UUID=3F9D788B3774630C /media/SanDisk ntfs defaults,nofail 0 2
    But I can't find anything that looks unusual into my /etc/fstab

  • Mounting ZFS filesystems: (1/10)cannot mount  directory is not empt(10/10

    Hi
    in zone:
    bash-3.00# reboot
    [NOTICE: Zone rebooting]
    SunOS Release 5.10 Version Generic_144488-17 64-bit
    Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
    Hostname: dbspfox1
    Reading ZFS config: done.
    Mounting ZFS filesystems: (1/10)cannot mount '/zonedev/dbspfox1/biblio/P622/dev': directory is not empt(10/10 )
    svc:/system/filesystem/local:default: WARNING: /usr/sbin/zfs mount -a failed: exit status 1
    Nov 4 10:07:33 svc.startd[12427]: svc:/system/filesystem/local:default: Method "/lib/svc/method/fs-local" fa iled with exit status 95.
    Nov 4 10:07:33 svc.startd[12427]: system/filesystem/local:default failed fatally: transitioned to maintenanc e (see 'svcs -xv' for details)
    For sure the directory in not empty, but the others too are not empty.
    bash-3.00# zfs list
    NAME USED AVAIL REFER MOUNTPOINT
    zonedev 236G 57.6G 23K /zonedev
    zonedev/dbspfox1 236G 57.6G 1.06G /zonedev/dbspfox1
    zonedev/dbspfox1/biblio 235G 57.6G 23K /zonedev/dbspfox1/biblio
    zonedev/dbspfox1/biblio/P622 235G 57.6G 10.4G /zonedev/dbspfox1/biblio/P622
    zonedev/dbspfox1/biblio/P622/31mars 81.3G 57.6G 47.3G /zonedev/dbspfox1/biblio/P622/31mars
    zonedev/dbspfox1/biblio/P622/31mars/data 34.0G 57.6G 34.0G /zonedev/dbspfox1/biblio/P622/31mars/data
    zonedev/dbspfox1/biblio/P622/dev 89.7G 57.6G 50.1G /zonedev/dbspfox1/biblio/P622/dev
    zonedev/dbspfox1/biblio/P622/dev/data 39.6G 57.6G 39.6G /zonedev/dbspfox1/biblio/P622/dev/data
    zonedev/dbspfox1/biblio/P622/preprod 53.3G 57.6G 12.9G /zonedev/dbspfox1/biblio/P622/preprod
    zonedev/dbspfox1/biblio/P622/preprod/data 40.4G 57.6G 40.4G /zonedev/dbspfox1/biblio/P622/preprod/data
    bash-3.00# svcs -xv
    svc:/system/filesystem/local:default (local file system mounts)
    State: maintenance since Fri Nov 04 10:07:33 2011
    Reason: Start method exited with $SMF_EXIT_ERR_FATAL.
    See: http://sun.com/msg/SMF-8000-KS
    See: /var/svc/log/system-filesystem-local:default.log
    Impact: 33 dependent services are not running:
    svc:/system/webconsole:console
    svc:/system/filesystem/autofs:default
    svc:/system/system-log:default
    svc:/milestone/multi-user:default
    svc:/milestone/multi-user-server:default
    svc:/application/autoreg:default
    svc:/application/stosreg:default
    svc:/application/graphical-login/cde-login:default
    svc:/application/cde-printinfo:default
    svc:/network/smtp:sendmail
    svc:/application/management/seaport:default
    svc:/application/management/snmpdx:default
    svc:/application/management/dmi:default
    svc:/application/management/sma:default
    svc:/network/sendmail-client:default
    svc:/network/ssh:default
    svc:/system/sysidtool:net
    svc:/network/rpc/bind:default
    svc:/network/nfs/nlockmgr:default
    svc:/network/nfs/client:default
    svc:/network/nfs/status:default
    svc:/network/nfs/cbd:default
    svc:/network/nfs/mapid:default
    svc:/network/inetd:default
    svc:/system/sysidtool:system
    svc:/system/postrun:default
    svc:/system/filesystem/volfs:default
    svc:/system/cron:default
    svc:/application/font/fc-cache:default
    svc:/system/boot-archive-update:default
    svc:/network/shares/group:default
    svc:/network/shares/group:zfs
    svc:/system/sac:default
    svc:/network/rpc/gss:default (Generic Security Service)
    State: uninitialized since Fri Nov 04 10:07:31 2011
    Reason: Restarter svc:/network/inetd:default is not running.
    See: http://sun.com/msg/SMF-8000-5H
    See: man -M /usr/share/man -s 1M gssd
    Impact: 17 dependent services are not running:
    svc:/network/nfs/client:default
    svc:/system/filesystem/autofs:default
    svc:/system/webconsole:console
    svc:/system/system-log:default
    svc:/milestone/multi-user:default
    svc:/milestone/multi-user-server:default
    svc:/application/autoreg:default
    svc:/application/stosreg:default
    svc:/application/graphical-login/cde-login:default
    svc:/application/cde-printinfo:default
    svc:/network/smtp:sendmail
    svc:/application/management/seaport:default
    svc:/application/management/snmpdx:default
    svc:/application/management/dmi:default
    svc:/application/management/sma:default
    svc:/network/sendmail-client:default
    svc:/network/ssh:default
    svc:/application/print/server:default (LP print server)
    State: disabled since Fri Nov 04 10:07:31 2011
    Reason: Disabled by an administrator.
    See: http://sun.com/msg/SMF-8000-05
    See: man -M /usr/share/man -s 1M lpsched
    Impact: 1 dependent service is not running:
    svc:/application/print/ipp-listener:default
    svc:/network/rpc/smserver:default (removable media management)
    State: uninitialized since Fri Nov 04 10:07:32 2011
    Reason: Restarter svc:/network/inetd:default is not running.
    See: http://sun.com/msg/SMF-8000-5H
    See: man -M /usr/share/man -s 1M rpc.smserverd
    Impact: 1 dependent service is not running:
    svc:/system/filesystem/volfs:default
    svc:/network/rpc/rstat:default (kernel statistics server)
    State: uninitialized since Fri Nov 04 10:07:31 2011
    Reason: Restarter svc:/network/inetd:default is not running.
    See: http://sun.com/msg/SMF-8000-5H
    See: man -M /usr/share/man -s 1M rpc.rstatd
    See: man -M /usr/share/man -s 1M rstatd
    Impact: 1 dependent service is not running:
    svc:/application/management/sma:default
    bash-3.00# df -h
    Filesystem size used avail capacity Mounted on
    / 59G 1.1G 58G 2% /
    /dev 59G 1.1G 58G 2% /dev
    /lib 261G 7.5G 253G 3% /lib
    /platform 261G 7.5G 253G 3% /platform
    /sbin 261G 7.5G 253G 3% /sbin
    /usr 261G 7.5G 253G 3% /usr
    proc 0K 0K 0K 0% /proc
    ctfs 0K 0K 0K 0% /system/contract
    mnttab 0K 0K 0K 0% /etc/mnttab
    objfs 0K 0K 0K 0% /system/object
    swap 2.1G 248K 2.1G 1% /etc/svc/volatile
    fd 0K 0K 0K 0% /dev/fd
    swap 2.1G 0K 2.1G 0% /tmp
    swap 2.1G 16K 2.1G 1% /var/run
    zonedev/dbspfox1/biblio
    293G 23K 58G 1% /zonedev/dbspfox1/biblio
    zonedev/dbspfox1/biblio/P622
    293G 10G 58G 16% /zonedev/dbspfox1/biblio/P622
    zonedev/dbspfox1/biblio/P622/31mars
    293G 47G 58G 46% /zonedev/dbspfox1/biblio/P622/31mars
    zonedev/dbspfox1/biblio/P622/31mars/data
    293G 34G 58G 38% /zonedev/dbspfox1/biblio/P622/31mars/data
    zonedev/dbspfox1/biblio/P622/dev/data
    293G 40G 58G 41% /zonedev/dbspfox1/biblio/P622/dev/data
    zonedev/dbspfox1/biblio/P622/preprod
    293G 13G 58G 19% /zonedev/dbspfox1/biblio/P622/preprod
    zonedev/dbspfox1/biblio/P622/preprod/data
    293G 40G 58G 42% /zonedev/dbspfox1/biblio/P622/preprod/data
    What i missed? what happen with zfs dev directory?
    thank you
    Walter

    Hi
    I finally found the problem.
    ZFS naming restrictions:
    names must begin with a letter
    Walter

  • Mount.cifs(8) on Solaris 10 8/07?

    I have Solaris 10 8/07 installed on my workstation, and would like to mount a directory shared from my Windows machine. "apropos cifs" shows mount.cifs(8), and there is a man page, but the binary is no-where to be found. "find / -name \*cifs\*" did not return anything useful, and mount(1M) does not seem to accept "-F cifs". A quick search on Sunsolve does not turn up much.
    Any ideas?
    Thanks,
    -Andrew

    Yea, the one over on Opensolaris probably isn't a suitable replacement.
    http://docs.sun.com/app/docs/doc/816-5166/6mbb1kps6?a=expand
    only lists the following:
    # mount_hsfs(1M) � mount hsfs file systems
    # mount_nfs(1M) � mount remote NFS resources
    # mount_pcfs(1M) � mount pcfs file systems
    # mount_tmpfs(1M) � mount tmpfs file systems
    # mount_udfs(1M) � mount a udfs file system
    # mount_ufs(1M) � mount ufs file systems
    You might try recompiling Samba yourself from source and see it that fixes the issue.
    alan

  • Kinit mounts root filesystem as read only [HELP][solved]

    hello
    I've being messing around with my mkinitcpio trying to optimize my boot speed, i removed some of the hooks at the beginning i couldn't boot, but then now i can boot but the root filesystem mounts as read only, i tried everything my fstab looks fine, / exists with defaults i tried to mount it referencing by it's uuid or by it's name and i get the same results, it mounts the filesystem as root only all the time no mather what i do.
    There is not logs since i started playing with mkinitcpio, or anything i searched everywhere in this forum and around the internet, and i can't find any solution that would work, i restored all the hooks and modules on mkinitcpio and the result it's still the same. i also changed the menu.lst in grub to vga=773 but that's about it.
    Can anyone help with this please i can't seem to boot properly.
    Regards
    Last edited by ricardoduarte (2008-09-14 16:16:25)

    Hello
    Basically what happens it's that it loads all the uDev events then the loopback, it mounts the root read only, then when it checks filesystems it says
    /dev/sda4: clean, 205184/481440 files, 1139604/1920356 blocks [fail]
    ************FILESYSTEM CHECK FAILED****************
    * Please repair manually and reboot. Note that the root *
    * file system is currently mounted read-only. To remount *
    * it read-write: mount -n -o remount,rw / *
    * When you exit the maintenance shell the will *
    * reboot automatically. *
    Now what bugs me its that i can do that mount -n -o remount,rw / with no problems and when i do
    e2fsck -f /dev/sda4
    it doesn't return any errors just says that 0.9 non continuous.
    none of this makes sense to me!! thats why i though that the problem could be coming from mkinitcpio or something
    any ideas
    Thanks for your help, btw thanks for the quick reply
    Regards
    Last edited by ricardoduarte (2008-09-14 15:48:49)

  • Mounting CIFS on MAC with large file support

    Dear All,
    We are having issues copying large files ( > 3.5 GB) from MAC to a CIFS Share (smb mounted on MAC) whereby the copy fails if files are larger than 3.5 GB in size and hence I was wondering if there is any special way to mount CIFS Shares (special option in the mount_smbfs command perhaps ) to support large file transfer?
    Currently we mount the share using the command below
    mount_smbfs //user@server/<share> /destinationdir_onMAC

    If you haven't already, I would suggest trying an evaluation of DAVE from Thursby Software. The eval is free, fully functional, and supported.
    DAVE is able to handle large file transfer without interruption or data loss when connecting to WIndows shared folders. If it turns out that it doesn't work as well as you like, you can easily remove it with the uninstaller.
    (And yes, I work for Thursby, and have supported DAVE since 1998)

Maybe you are looking for