Shutdown ports that is not in use for a while using LMS 4.x

Hi,
Is there a way to disable switch ports that has not been in use for a while using LMS 4.x
Your assistance would be much appreciated.
Regards,
Clifton

Similar Messages

View all files that have not been opened for a while?

I'm trying to clean up my computer and make some space
Problem is I just have too many files folders and subfolders so going in and out of each folder will take way too long
So my question is
Is there a search method that will show me all the files that I haven't used or opened in a while so that I could just browse through those?

omsaj wrote:
Is there a search method that will show me all the files that I haven't used or opened in a while so that I could just browse through those?
Yep, sure is.
Download the free Easy Find (direct download)
https://s3.amazonaws.com/DTWebsiteSupport/download/freeware/easyfind/4.9/EasyFin d.app.zip
Now what your going to do is select your Home folder or a folder inside say Documents
Then your going to adjust your search settings on the left and use the letter "a" as the search term and click the search and let it rip, it will take some time.
Next click sort by the "Modified" date and you can then go about it
Repeat for the letter "e" "i" "o" "u"
Be careful, Easy Find also finds invisible and hidden files, and you dont' want to delete the iPhoto Libray or anything in the hidden Users/Library folder.
Perhaps you should create a backup first, then later on if you made a mistake you can recover
Most commonly used backup methods

I have 3 PC's. Two of them I use at 2 different locations and only use them 6 months a year. So, if I have Icloud for my calendar, and turn on a computer that has not been used for 6 months, does all the old information on that computer to go Icloud?

I have 3 PC's. Two of them I use at 2 different locations and only use them 6 months each year. When I turn on a computer that has not been used for 6 months, does all of the old information from that computer end up in Icloud? Does Icloud push all the new calendar and contact items over the old items?

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Cannot get into iPad, it keeps wanting me to sign in using old email that does not exist, and for a password that she does not remember, so I am unable to change password. How do I get around this?

Cannot get into old iPad, it keeps wanting me to sign in using old email id that does not exist, and for a password that she does not remember, so I am unable to change password. How do I get around this?

With iOS 7 Activation lock you can't.
iCloud: Activation Lock
http://support.apple.com/kb/PH13695
 Cheers, Tom

Can an educational institution that is not accredited use these wonderful tools? I would hope Apple makes this approval process as individual for the educational institutions as they are for the individual student's learn needs and qualifications.ing

I would hope Apple makes this iTunes U approval process as individual for the educational institutions as they are for the individual student's learn needs and qualifications. Can an educational institution that is not accredited use these wonderful tools?

I see that Common Sense Meda offers courses. I don't believe they are an accredited educational institution. Approval may be on a case by case basis so Apple can control the experience. I hope it's open.
I'm more concerned that Apple is excluding accredited educational institutions in many countries.

Cannot delete an old vault that is not being used.

Cannot delete an old vault that is not being used. I get the following notification: The operation can’t be completed because the item “#3 Vault-GTech RAID mini-1TB” is locked. I placed this vault on a external HD until I set up a new vault with the same name in Aperture.
Now I want to delete the older Vault. Any suggestions? Thank you, Bob Stern

OK think I have it, but you'll need to use the terminal window and sudo to do this If you never used either then read this carefully before you begin.
start
Open a terminal, go to /Applications/Utilities and click on the Terminal app.
Type the following but do not press return: sudo chflags nouchg
Make sure to enter a space at the end of the above command
Go to Finder, locate the vault and drag it to the Terminal window at the end of the above command. The mouse pointer will turn into a green plus sign showing you your are dragging the file.
When you let go the full path of the vault will be at the end of the command, now press return.
If this is the first time you are running sudo you'll get some text telling you to be very careful. You'll also be prompted for your password, enter it.
Back in Finder in the Info window for the vault the Locked checkbox should be clear.
that's it
good luck, post back if you have any troubles.
regards

After many hours of "rendering", the message appears that"--could not be prepared for publishishing because an error occurred error code= -34" What does this mean?

After many hous of "rendering" the message appeared that "--could not be prepared for publishing because an error occurred error code= -34"

re-post in the iMovie forum where all the people that use that software are. This is the Lion 10.7 forum.

Spooling out profile that are not being used

hi guys,
is there anyway to spool out those profile that are not in used or assigned to any username or roles?

flaskvacuum wrote:
hi guys,
is there anyway to spool out those profile that are not in used or assigned to any username or roles?
SQL> CREATE PROFILE test LIMIT
2     FAILED_LOGIN_ATTEMPTS 5
3     PASSWORD_LIFE_TIME 60
4     PASSWORD_REUSE_TIME 60
5     PASSWORD_REUSE_MAX 5
6     PASSWORD_VERIFY_FUNCTION null
7     PASSWORD_LOCK_TIME 1/24
8     PASSWORD_GRACE_TIME 10;
Profile created.
-- Created but not assigned --
SQL> select distinct profile from dba_profiles where profile not in (select profile from dba_users);
PROFILE
TEST
SQL>

What are the two XSLT tags, previously that could not be used in XI?

What are the two XSLT tags, previously that could not be used in XI?

Dear Niladri,
sorry I missed your question a little bit... my answer was about the XSD barriers.
About XSLT, it's the format-number() and unparsed-entity-uri() functions which are not supported.
Best regards,
Andras

HT1689 can i use an old iphone that is not being used as a phone as just an ipod?

Can i use an old iphone that is not being used as a phone as just an ipod?

Yes. Instructions are here: http://support.apple.com/kb/HT3406

HT1414 How do I restore from an earlier icloud backup that is not showing up for my ipad?

How do I restore from an earlier icloud backup that is not showing up for my ipad?

You can't. Usually you have only the most recent backup to choose from (I do). Some users has said they get 3 to choose from (this is the max as stated in Apple literature). You can't go back further than that.
The usual advice is that all photos should be synced to a computer (too many users have lost some/all their photos doing a restore - don't trust them solely to icloud). If you've been doing that, you can find them on your computer.

HT1414 Anybody have an ipad that will not power on, for no reason? My ipad always worked fine and then one day it shut down because the battery was low so I plugged it in and it will not power on. Tryed the hard reset option still no power on :(

Anybody have an ipad that will not power on, for no reason? My ipad always worked fine and then one day it shut down because the battery was low so I plugged it in and it will not power on. Tryed the hard reset option still no power on

You can try recovery mode to see if you can revive the iPad.
http://support.apple.com/kb/ht4097
Have you left the iPad charging for a couple of hours or so to be sure?

Since updating to iOS5, the delete buttons on all my apps are missing. I did a hard shutdown, but that did not resolve the issue. Would appreciate any suggestions to restore this feature.

Since updating to iOS 5, the delete buttons on all my apps are missing. I did a hard shutdown, but that did not resolve the issue. Would appreciate any suggestions to resolve this issue.

There is No Pre-installed Youtube App in iOS 6.
http://itunes.apple.com/app/youtube/id544007664?mt=8

List AD accounts that have not been used for months?

Hello,
I use oldcmp.exe to show me what computers have not been used for months and I can disable them, but I wish to do the same for users Active Directory accounts, is this possible?
We use AD 2003
Thanks

sorry for slightly belated reply. I've used another version of this script that doesn't have the GUI interface on it, this will make it easier for you to run from a scheduled task.
copy the code and make the relevant changes to the top section of the script as the comments explain. This will send and email with a link to the report generated.
#Script designed to search AD for inactive user accounts, mark them as inactive and move them to a specific OU then disable them
#Script can be run in the following formats
# 1. Report only
# 2. Report and move account
# 3. Report, move and disable
#Uses quest powershell tools which can be downloaded from http://www.quest.com/powershell/activeroles-server.aspx
#Version 2.0
#Added email functionality
#Denis Cooper
#Setup script Variables
#Change the setting from True to false to alter the way the script runs (only one option can be true)
$ReportOnly = "True" #Generates a CSV file showing all inactive user accounts
$ReportandMove = "False" #Generates a CSV report, moves the users to a specific OU
$ReportMoveDisable = "False" #Generates a CSV report, moves the users to specific OU, and sets the description
#Set the period of inactivity in days
$InactiveFor = "90"
#Specify the OU to search for inactive users - us AD CN if searching enire AD
$SourceOU = "OU=Users,DC=MyDomain,DC=Int"
#Specify the destination OU to move inactive users to is using report and move or report move disable script options
$DestinationOU = "OU=Inactive Users,DC=MyDomain,DC=Int"
#Don't mark anyone with the the specified prefix in the description field to inactive - DND stands for Do Not Disable and is specified
#in the users account description field for accounts which may not be used to login so will show as inactive but that you don't want to disable
#must leave the * after the word for wildcard matching
$DescriptionPrefix = "DND*"
#Specify the description to set in the computer account on ReportMoveDisable option
$Description = "Account disabled due to inactivity on $Today"
#Specify the path to create the csv file (make sure the folder exists)
$ReportFile = "\\server\share\InactiveUsersReport.csv"
#Get todays date and store it in the $today variable
$Today = Get-Date
#Email Settings
$SMTPServer = "smtp-server-name" #replace this with your internal smtp server
$FromAddress = "[email protected]" #replace this with your from address
$ToAddress = "[email protected]" #replace this with your TO address
$CCAddress = "[email protected]" #replace this with your TO address
$Subject = "This is your subject line" #replace this with the subject line for the email
$MessageContent = "
Hello,
Please find a link to the latest report containing users that have been inactive for $inactivefor days
$ReportFile
Please take the appropriate action.
Thanks you,
IT
#NO CHANGES BELOW THIS LINE
Function SendEmail {
$messageParameters = @{
Subject = $subject
Body = $messagecontent
From = $fromaddress
TO = $ToAddress
CC = $CCAddress
SmtpServer = $SMTPServer
Send-MailMessage @messageParameters
#Generates a report showing inactive users
Function ReportOnly {
$inactiveUsers | Export-Csv $ReportFile
$count = $inactiveUsers.Count
Write-Host -ForegroundColor White "$count inactive users were found and are being processed"
SendEmail
Invoke-Item $ReportFile
#Generates report and moves accounts to desitnation OU
Function ReportandMove {
$inactiveUsers | Export-Csv $ReportFile
$count = $inactiveUsers.Count
Write-Host -ForegroundColor White "$count inactive users were found and are being processed"
Invoke-Item $ReportFile
$inactiveUsers | foreach {
Move-QADObject $_ -NewParentContainer $DestinationOU
#Generates report, moves accounts to destination OU, disables the account and sets the description
Function ReportMoveDisable {
$inactiveUsers | Export-Csv $ReportFile
$count = $inactiveUsers.Count
Write-Host -ForegroundColor White "$count inactive users were found and are being processed"
Invoke-Item $ReportFile
$inactiveUsers | foreach {
Disable-QADUser $_
Set-QADUser $_ -Description $Description
Move-QADObject $_ -NewParentContainer $DestinationOU
#Runs the script
#Finds all inactive user accounts which are in an enabled state and store them in the variable $inactiveusers
$inactiveUsers = Get-QADUser -SizeLimit 0 -SearchRoot $sourceOu -NotLoggedOnFor $InactiveFor -Enabled | Where-Object {$_.description -notlike $DescriptionPrefix}
#Checks which script to run
If (($ReportONly -eq "True") -and ($ReportandMove -eq "True" -or $ReportMoveDisable -eq "True")) {
Write-Host -ForegroundColor RED "Only one run condition is allowed, please set only one run value to True and the others to false"
Break
If ($ReportONly -ne "True" -and $ReportandMove -ne "True" -and $ReportMoveDisable -ne "True") {
Write-Host -ForegroundColor RED "No valid run condition was specified, please set only one run value to True and the others to false"
Break
If ($ReportONly -eq "True") {
Write-Host -Foregroundcolor Green "Script running in report only mode."
Write-Host -Foregroundcolor Green "Checking for accounts inactive for $inactivefor days in the OU $SourceOU"
Write-Host -Foregroundcolor Green "The report will open automatically once complete, or you can find it here $ReportFile"
ReportOnly
If ($ReportandMove -eq "True") {
Write-Host -Foregroundcolor Green "Script running in report and move mode."
Write-Host -Foregroundcolor Green "Checking for accounts inactive for $inactivefor days in the OU $SourceOU"
Write-Host -Foregroundcolor Green "The report will open automatically once complete, or you can find it here $ReportFile"
Write-Host -ForegroundColor Green "Any inactive accounts will be moved to this OU $destinationOU"
ReportAndMove
If ($ReportMoveDisable -eq "True") {
Write-Host -Foregroundcolor Green "Script running in report, move and disable mode."
Write-Host -Foregroundcolor Green "Checking for accounts inactive for $inactivefor days in the OU $SourceOU"
Write-Host -Foregroundcolor Green "The report will open automatically once complete, or you can find it here $ReportFile"
Write-Host -ForegroundColor Green "Any inactive accounts will be moved to this OU $destinationOU and disabled and their description updated"
ReportMoveDisable
This link should help you create a scheduled task to run the script
http://dmitrysotnikov.wordpress.com/2011/02/03/how-to-schedule-a-powershell-script/
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Identify/expire Pages that have not been accessed for certain time

Hi,
I would like to create a publishing portal. Many users are able to create pages. I have the requirement that if a page does not get accessed for a certain time-period - it should be flagged for deletion and the creator should be notified by email.
Expiration policies depend on creation/modification date. Does this work for the last-accessed time (whereever I get this information from) aswell?
Sven

Use below powershell
$outputPath = Read-Host “Outputpath (e.g. C:\output\UnusedSites.txt)”
$lastDate=Read-Host “Last Accessed Date (in format mm/dd/yyyy)”
$gc = Start-SPAssignment
$site=$gc | get-spsite -Identity https://sitecollectionUrl
foreach($web in $site.AllWebs)
if ($web.LastItemModifiedDate -lt $lastDate)
Write-Host -f Red “Site is old…” + $Web.Title
Add-Content -Path $outputPath -Value “$($web.Title),$($web.ServerRelativeUrl),
$($web.LastItemModifiedDate),$($web.Author)”
else
Write-Host -f Green “Site: [" + $web.Title + "] Last Modified Date: ” + $web.LastItemModifiedDate
Stop-SPAssignment $gc
Or
plan to use this tool
http://www.harepoint.com/Products/HarePointAnalyticsForSharepoint/FindOutdatedContentInSharePoint.aspx

Shutdown ports that is not in use for a while using LMS 4.x

Similar Messages

Maybe you are looking for