SHUTDOWN PROCESS IS TAKING TIME

Dear Collegue,
What could be the issue while shutdown the database in Oracle 10g? It takes more than half-an-hour to shutdown.
Regards,
Purvesh Prajapati

Hi Purvesh,
This does not look to be a Berkeley DB issue. Hence this is not the right forum.
Thanks,
Sandra

Similar Messages

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time.

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.

Ignore. I figured it out:)

Since I upgraded to Adobe Created Cloud, my photo editing processes are taking more than 10 times longer than they used to. Why would this be?

Since I upgraded to Adobe Created Cloud, my photo editing processes are taking more than 10 times longer than they used to. Why would this be?

You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

In one website, it takes to much time to load the page, in other site its not taking time, so do i need to enable or change any settings

in one website, its taking time to load the page, on other PC its not taking any time( with internet explorer) in my PC other websites are opening quickly but this website takes too much time with firefox

Zepo wrote:
My iMac has been overwhelmed almost since I bought it new. After some digging the guiness bar suggested its my Aperture library being on the same
internal Tera byte drive as my operating system.
Having a single internal hard drive overfilled (drives slow as they fill) is very likely contributing to your problems, but IMO "my Aperture library being on the same internal Tera byte drive as my operating system" is very unlikely to be contributing to your problems. In fact the Library should stay on an underfilled (roughly, for speed, I would call ~half full "underfilled") internal drive, not on the Drobo.
Instead build a Referenced-Masters workflow with the Library and OS on an internal drive, Masters on the Drobo, OS 10.6.8 (there have been issues reported with OS 10.7 Lion). Keep Vault backup of the Library on the Drobo, and of course back up all Drobo data off site.
No matter what you do with i/o your C2D Mac is not a strong box for Aperture performance. If you want to really rock Aperture move to one of the better 2011 Sandy Bridge Macs, install 8 GB or more of RAM and build a Referenced-Masters workflow with the Library and OS on an internal solid state drive (SSD).
Personally I would prefer investing in a Thunderbolt RAID rather than in a Drobo but each individual makes his/her own network speed/cost decisions. The Drobo should work OK for referenced Masters even though i/o is limited by the Firewire connection.
Do not forget the need for off site backup. And I suggest that in the process of moving to your new setup it is most important to get the data safely and redundantly copied and generally best to disregard how long it may take.
HTH
-Allen Wicks

Gl posting is taking time

Hi All,
Everyday we run a gl process. Gl posting is taking more 1 hr. Same way 4 gl posting run during gl process which is causing
performance delay.
I see in the the log file that below stage is taking time.
glpibr.concurrency() 02-MAR-2013 08:13:03
glpibr.concurrency() 02-MAR-2013 08:13:03
glpidb() 02-MAR-2013 08:46:41
glpidb() 02-MAR-2013 08:49:59
glpibr() 02-MAR-2013 08:49:59
This process itself takes more than 30 hours. It varies everyday. Sometime it takes 1 hr also.
insert into gl_balances
( set_of_books_id, code_combination_id, currency_code, period_name,
actual_flag, budget_version_id, encumbrance_type_id, last_update_date,
last_updated_by, period_type, period_year, period_num, period_net_dr, period_net_cr,
period_to_date_adb, quarter_to_date_dr, quarter_to_date_cr, quarter_to_date_adb, year_to_date_adb,
project_to_date_dr, project_to_date_cr, project_to_date_adb, begin_balance_dr, begin_balance_cr,
period_net_dr_beq, period_net_cr_beq, begin_balance_dr_beq, begin_balance_cr_beq, template_id, translated_flag )
select pi.set_of_books_id, pi.code_combination_id, pi.currency_code, pi.period_name, pi.actual_flag, pi.budget_version_id, pi.encumbrance_type_id, sysdate, :fnd_user_id, pi.period_type, pi.period_year, pi.period_num, 0, 0, NULL, 0, 0, NULL, NULL,
0, 0, NULL, 0, 0, NULL, NULL, NULL, NULL, pi.template_id, pi.translated_flag from gl_posting_interim_50130 pi where not exists ( select 'X' from gl_balances b where b.set_of_books_id = pi.set_of_books_id and b.code_combination_id = pi.code_combination_id and b.currency_code = pi.currency_code and
b.period_name = pi.period_name and b.actual_flag = pi.actual_flag and
nvl(b.encumbrance_type_id, -1) = nvl(pi.encumbrance_type_id, -1) and
nvl(b.budget_version_id, -1) = nvl(pi.budget_version_id, -1) and decode(b.translated_flag, '', '-1', 'Y', '0', 'N', '0', 'R', '1', b.translated_flag) = decode(pi.translated_flag, '', '-1', 'Y', '0', 'N', '0', 'R', '1', pi.translated_flag) )Above query is taking more than 30 mins as i can see in awrreport . As per metalink note id - 1096873.1 it is due to gl_posting_interim tables which is locking the another gl_interim_posting tables. I dont see any lock but i can see lots of gl_posting_interim present in the database. As per my knowledge this table must be dropped after posting got over.
Env details -
Apps version - 11.5.10.2
DB version - 11.2.0.1
OS - IBM AIX 6.1
Please suggest.
Thanks

Please see these docs.
R11i GLTTRN Translation Performance Issue In INSERT INTO GL_BALANCES [ID 761898.1]
Information Center: Optimizing Performance for Oracle General Ledger [ID 1489537.2]
Performance Issue With Translation Program After Upgrading To 10G Database [ID 742025.1]
Deleting Summary Accounts Has Poor Performance [ID 1088585.1]
GL Posting Performance Issue at glpip2() [ID 280641.1]
GLPPOS Performance Issue After 9i To 10g Upgrade in gluddl.lpc [ID 1262020.1]
Thanks,
Hussein

Transfer of XML through a firewall is taking time

Hi,
I have following scenario:
Publisher BPEL --> || Firewall || Subscriber BPEL
Now the XML is being transferred over the firewall is around 9MB.
When these two BPEL processes are deployed on local intranet, the transfer of XML is too fast and Subscriber BPEL completes within seconds. But when above two BPEL are deployed over the internet with firewall in-between, XML transfer is taking time of about 15 Minutes.
Is there a solution to reduce the XML transfer time or some work-around to handle such issue?
Thanks,
Bhavnesh.

If it is a 9mb file this is quite large, I think this will come down to latency and bandwidwth. Test form your environment how long does it take to download a 9mb, then from the remote location. If this takes around 15 mins to perform then there is little you can do but get a better ISP.
I doubt the issue will be with the firewall.
cheers
James

How to automate the Oracle database start and shutdown process

How we can automate and oracle database start and stop procees with Linux start/shutdown process.
I want to automatically start the oracle database at the time linux server and shutdown the database on shutdown linux server.

Hi,
I can share my scripts:
1) /home/oracle/start_oracle.sh
#Script should be ran as Oracle user
cd /tmp
export ORACLE_SID=orcl
export ORACLE_HOME=/oracle/ora9i
lsnrctl start
sqlplus -S /nolog <<ENDSQL
connect / as sysdba
startup
exit
ENDSQL
emctl start dbconsole
isqlplusctl start
NOTE: emctl and isqlplus are optional
2) /home/oracle/stop_oracle.sh
#Script should be ran as Oracle user
cd /tmp
export ORACLE_SID=orcl
export ORACLE_HOME=/oracle/ora9i
isqlplusctl stop
emctl stop dbconsole
sqlplus -S /nolog <<ENDSQL
connect / as sysdba
shutdown immediate
exit
ENDSQL
lsnrctl stop
NOTE: emctl and isqlplus are optional
Then what you need:
1) K91oracle_stop (put it in the desired run level)
#!/bin/bash
# description: Stop Oracle before reboots
su - oracle -c "/home/oracle/stop_oracle.sh" >> /home/oracle/stoporacle.log
2) S91oracle_start (put it in the desired run level)
#!/bin/bash
# description: Start Oracle after reboots
su - oracle -c "/home/oracle/start_oracle.sh" >> /home/oracle/startoracle.log
Bye.

Roll back process after certain time limit

Hi All,
I am using Oracle 11g. I am calling one stored procedure (MainProc) from my application. Through this procedure I am calling internally three more procedure (Insert recordProc1, InsertRecordProc2 and DeleteRecProc).
The third stored procedure (DeleteRecProc) is taking more than 5 minutes. But if these process crossings more than 5 minutes, have to stop the process and roll back all three stored procedures functions.
I don’t have any commit statement inside of these stored procedures. But I have EXECUTE IMMEDIATE Inside of stored DeleteRecProc.
Help required: Help me to make a counter / Timer. I have a parameter, which has the assigned time limit. How to check whether the process crossing the time limit? How to stop the process and call Rollback?
Thanks in advance.
Manian

Don't know if this helps your situation.
http://docs.info.apple.com/article.html?artnum=301579
here is the entire thread
http://discussions.apple.com/message.jspa?messageID=1237801#1237801

I want to know what should do if the SPID : 12 Checkpoint is taking time.

Hi Team,
I want to know what should do if the SPID : 12 Checkpoint is taking time.
I can't kill it also.
Thanks

It was taking quite long therefore I have pasted here the comments and there was a activity for database restore was pending on that database due to which I have to restart the instance service.
If next time it will occur what should I do?
Nothing you cannot do anything reason being it is system process. I guess i said same thing in my comment before. Its just there because system is running checkpoint. I upfront cannot suggest what you should do but I have seen this on many prod databases and
it is normal. Dont restart SQL Server services if database is in middle of restore
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

PartitionOn taking time

Hi All,
We have weekly maintainence for essbase cube. There are total 2 source cubes and target cubes for the reporting purposes. The target cubes are accessed through the
partitions. During weekend maintainence process we load the data into the cube and in the end we run the Partitionon.bat script to create partition betweeb the cubes
here the problem comes "the script is common for all the countries but for some countries the script excutes in 20 min and for some countries it takes nearly 1hr even
though the cube size is very less when compared with the countries which execute first".
Thanks in advance.

Hi MattRollings ,
As i said we are having two types of partitions one is for statitic reports and the another for the dyanmic reporting. yes the script which we use to for partitionon will create the partitions. The Script is common for all the countries and the script runs like this
1.First it creates the Transparent partition.
2.Then to create the Replica it refreshes from the two source cubes after that aggregation happens asually.
The main problem comes here during the refresh from the source to the Target its taking time. To say exactly during the refresh from source to the replica its taking 15min. For the other countries its taking only 8 min of time.
I have gone ahead to compare two different countries replica cubes size what i found is that one country cube size is 2Gb and the another one is 2.5Gb the one which is having less size taking 20min to complete and the other one takes 1hr time. Even though the second one is .5GB extra when compared with the first it should take 25min to create the replica partition.
what might be reason to consume more time while creating replica partition? Is it dependent on Defined Blocks, Actual Blocks,Non missing leaf blocks etc?
Thanks Matt in advance.

Show shutdown process

How do I see what is happening as my mac is shutting down?
I remember some time ago seeing some sort or shutdown window showing all of the processes that were happening but I have forgotten how I did it.

Boot into verbose mode: hold command V when turning on computer.
Upon boot it will show start up process--mine is hanging there now.
Once booted shut down, the screen goes black and you'll see the shutdown process--mine hangs there as well.
I posted yesterday and no one seems to be able to even have the ability to say "don't know what the problem can be"--very irritating.
Good Luck.

Office Home and Student 2010 has stopped working Unspecified Error has occurred. Request cannot be processed at this time. Please try again later ( 0x8007000D )

My office is saying its an unlicensed product and it prompts me to re install. It come up with Microsoft Activation Wizard then when I select to activate software via the internet an error comes up saying:
Unspecified Error has occurred. Request cannot be processed at this time. Please try again later ( 0x8007000D )
Please can you help me? I have tried pressing shift and right click an using system administrator but still not working. I've called the UK helpline and have been cut off twice after repeating myself to the person on the other end. May be easier
to try and get some assistance on here?

Hi,
This error can indicate a permissions issue in the registry and/or other operating system issues.
Here is a
blog post which descripts some fixes to this specific error:
Check the Device Manager first to determine whether the issue was caused by an underlying operating system issue.
If it's not an issue with the operating system, try the rest steps descripted in the blog to troubleshoot the issue.
Please have a try and feel free to post back with any findings.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Publishing and Overwriting a Universe, Updates new measures quickly in Business Explorer / Information Spaces but taking time in dashboard to be updated.

Hi gurus:
I have a continuous problem while Publishing and Overwriting a Universe from IDT, new measures UPDATES quickly in Business Explorer / Information Spaces but taking time in dashboard to be updated. it approximately takes half an hour to be updated while accessing universe from dashboards.
Regards:
Jawad Khalid

Hi gurus:
I have a continuous problem while Publishing and Overwriting a Universe from IDT, new measures UPDATES quickly in Business Explorer / Information Spaces but taking time in dashboard to be updated. it approximately takes half an hour to be updated while accessing universe from dashboards.
Regards:
Jawad Khalid

I signed up for a free trial. I want to convert a Word document to a PDF document. I've signed in and been through the process a dozen times. It doesn't work.

I signed up for a free trial. I want to convert a Word document to a PDF document. I've signed in and been through the process a dozen times. It doesn't work.

Hi kemtnilion,
What did you get a trial of? Adobe doesn't offer free trials of the Acrobat.com online services; did you get a free trial of Acrobat, perhaps? If so, you can save a PDF directly to Word from Acrobat, by choosing File > Save as Other > Microsoft Word > Word Document.
Please let us know if you have additional questions.
Best,
Sara

WebLogic hangs around after shutdown process appears to complete - Message Driven Bean related

On my current project we have some Ant scripts that automatically
start and stop WebLogic. The stop script equates to (not exactly but
close enough):
java weblogic.Admin -url localhost:8001 -password password -username
username SHUTDOWN
WebLogic is start and shutdown for each system module. All modules
use the exact same script for these two actions. Some of the modules
use Message Driven Beans and consequently, since these use JMS, a
JMSxxx.dat file is generated in the jms_store directory. As part of
the cleanup process the jms_store directory and all files in it are to
be deleted AFTER WebLogic shuts down.
The shutdown process works fine in all cases where JMS is not used and
in all cases where JMS IS used but there are NO message driven beans.
However, when there is a message driven bean the server does not shut
down in a timely manner, sometimes not at all (no error messages are
produced), and the JMSxx.dat file
remains locked. Consequently, all of the tests run via the ant script
for modules come to a grinding halt (i.e. environment could not be
cleaned so further tests would be skewed).
Can anyone shed some light on a definitive order of events during
WebLogic's shutdown process? What is the best way to test for the
server being up? I know there is a ping utility for weblogic - should
this be used or should a connection to a JNDI or JMS listening port do
the trick? Any other ideas would be welcome.
Thanks in advance,
Mark

On my current project we have some Ant scripts that automatically
start and stop WebLogic. The stop script equates to (not exactly but
close enough):
java weblogic.Admin -url localhost:8001 -password password -username
username SHUTDOWN
WebLogic is start and shutdown for each system module. All modules
use the exact same script for these two actions. Some of the modules
use Message Driven Beans and consequently, since these use JMS, a
JMSxxx.dat file is generated in the jms_store directory. As part of
the cleanup process the jms_store directory and all files in it are to
be deleted AFTER WebLogic shuts down.
The shutdown process works fine in all cases where JMS is not used and
in all cases where JMS IS used but there are NO message driven beans.
However, when there is a message driven bean the server does not shut
down in a timely manner, sometimes not at all (no error messages are
produced), and the JMSxx.dat file
remains locked. Consequently, all of the tests run via the ant script
for modules come to a grinding halt (i.e. environment could not be
cleaned so further tests would be skewed).
Can anyone shed some light on a definitive order of events during
WebLogic's shutdown process? What is the best way to test for the
server being up? I know there is a ping utility for weblogic - should
this be used or should a connection to a JNDI or JMS listening port do
the trick? Any other ideas would be welcome.
Thanks in advance,
Mark

SHUTDOWN PROCESS IS TAKING TIME

Similar Messages

Maybe you are looking for