Shutdown takes a long time - Kernel 2.6.25-ARCH

I use the defualt arch kernel : 2.6.25-ARCH it works fine, but when i shutdown i see the green power off text but the pc powers off 4 minutes later. I have had this problem with ubuntu but  the kernel crew didnt see it as a problem and didnt fix it. Here is my bugreport : https://bugs.launchpad.net/ubuntu/+sour … bug/219967
I dont have this problem with windows XP or a live cd or that its a problem with my motherboard support or linux kernel

The whole config.gz is to long to post here is the main part:
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25
# Mon Jul 14 15:13:42 2008
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# General setup
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-ARCH"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=19
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
CONFIG_BLK_DEV_BSG=y
# IO Schedulers
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
# Processor type and features
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
CONFIG_VMI=y
CONFIG_LGUEST_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_EFI=y
# CONFIG_IRQBALANCE is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# Power management options
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_BAY=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_WMI=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_CUSTOM_DSDT_INITRD=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set
CONFIG_APM_REAL_MODE_POWER_OFF=y
# CPU Frequency scaling
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
Wich specific part should i compare with the live cd?
Last edited by jelly (2008-08-09 12:38:09)

Similar Messages

  • [systemd] shutdown takes a long time

    Hello.
    It takes quite a long time for my system to shutdown. The systemd ArchWiki suggests to log the shutdown like this. I am not quite sure what to look for. I suspect that smplayer or deluged might be the problem. Am I right and furthermore what can I do about it?
    Thank you for your time.
    Here the shutdown log:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.5.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=55614e59-14b9-47c5-a609-fd76662e6403 ro systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M enforcing=0 quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005ffeffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000005fff0000-0x000000005fff2fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000005fff3000-0x000000005fffffff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.2 present.
    [ 0.000000] DMI: /MS-7030, BIOS 6.00 PG 11/10/2005
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP bridge at 00:00:00
    [ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
    [ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
    [ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
    [ 0.000000] e820: last_pfn = 0x5fff0 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
    [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back
    [ 0.000000] 2 base 00E0000000 mask FFF0000000 write-combining
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f4fc0-0x000f4fcf] mapped at [ffff8800000f4fc0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x5ffeffff]
    [ 0.000000] [mem 0x00000000-0x5fdfffff] page 2M
    [ 0.000000] [mem 0x5fe00000-0x5ffeffff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0x5ffeffff @ [mem 0x1fcfd000-0x1fffffff]
    [ 0.000000] log_buf_len: 1048576
    [ 0.000000] early log buf free: 521388(99%)
    [ 0.000000] RAMDISK: [mem 0x37a32000-0x37d10fff]
    [ 0.000000] ACPI: RSDP 00000000000f8eb0 00014 (v00 Nvidia)
    [ 0.000000] ACPI: RSDT 000000005fff3040 00034 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 000000005fff30c0 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 000000005fff3180 048C1 (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000E)
    [ 0.000000] ACPI: FACS 000000005fff0000 00040
    [ 0.000000] ACPI: SSDT 000000005fff7b80 000D6 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: SRAT 000000005fff7cc0 00090 (v01 AMD HAMMER 00000001 AMD 00000001)
    [ 0.000000] ACPI: APIC 000000005fff7ac0 0007C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
    [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
    [ 0.000000] SRAT: Node 0 PXM 0 [mem 0x00100000-0x5fffffff]
    [ 0.000000] NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0x5ffeffff] -> [mem 0x00000000-0x5ffeffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x5ffeffff]
    [ 0.000000] NODE_DATA [mem 0x5feec000-0x5feeffff]
    [ 0.000000] [ffffea0000000000-ffffea00017fffff] PMD -> [ffff88005de00000-ffff88005f5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009bfff]
    [ 0.000000] node 0: [mem 0x00100000-0x5ffeffff]
    [ 0.000000] On node 0 totalpages: 393084
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3910 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 6080 pages used for memmap
    [ 0.000000] DMA32 zone: 383024 pages, LIFO batch:31
    [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
    [ 0.000000] If you got timer trouble try acpi_use_timer_override
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: BIOS IRQ0 override ignored.
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] ACPI: IRQ14 used by override.
    [ 0.000000] ACPI: IRQ15 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] e820: [mem 0x60000000-0xfebfffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88005fc00000 s83392 r8192 d23104 u1048576
    [ 0.000000] pcpu-alloc: s83392 r8192 d23104 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 386934
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=55614e59-14b9-47c5-a609-fd76662e6403 ro systemd.log_level=debug systemd.log_target=kmsg log_buf_len=1M enforcing=0 quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Checking aperture...
    [ 0.000000] AGP bridge at 00:00:00
    [ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
    [ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
    [ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
    [ 0.000000] Node 0: aperture @ e0000000 size 256 MB
    [ 0.000000] Memory: 1532356k/1572800k available (4635k kernel code, 464k absent, 39980k reserved, 4212k data, 756k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] spurious 8259A interrupt: IRQ7.
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 6291456 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 2009.231 MHz processor.
    [ 0.000000] Marking TSC unstable due to TSCs unsynchronized
    [ 0.006673] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.89 BogoMIPS (lpj=6697436)
    [ 0.006678] pid_max: default: 32768 minimum: 301
    [ 0.006716] Security Framework initialized
    [ 0.006725] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006963] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.010848] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.012136] Mount-cache hash table entries: 256
    [ 0.012496] Initializing cgroup subsys cpuacct
    [ 0.012500] Initializing cgroup subsys memory
    [ 0.012520] Initializing cgroup subsys devices
    [ 0.012522] Initializing cgroup subsys freezer
    [ 0.012524] Initializing cgroup subsys net_cls
    [ 0.012526] Initializing cgroup subsys blkio
    [ 0.012564] tseg: 0000000000
    [ 0.012585] mce: CPU supports 5 MCE banks
    [ 0.012635] SMP alternatives: switching to UP code
    [ 0.018800] ACPI: Core revision 20120320
    [ 0.022927] ftrace: allocating 17956 entries in 71 pages
    [ 0.030518] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
    [ 0.064541] CPU0: AMD Athlon(tm) 64 Processor 3000+ stepping 00
    [ 0.066663] Performance Events: AMD PMU driver.
    [ 0.066663] ... version: 0
    [ 0.066663] ... bit width: 48
    [ 0.066663] ... generic registers: 4
    [ 0.066663] ... value mask: 0000ffffffffffff
    [ 0.066663] ... max period: 00007fffffffffff
    [ 0.066663] ... fixed-purpose events: 0
    [ 0.066663] ... event mask: 000000000000000f
    [ 0.083576] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.083636] Brought up 1 CPUs
    [ 0.083638] Total of 1 processors activated (4020.89 BogoMIPS).
    [ 0.084405] devtmpfs: initialized
    [ 0.086410] PM: Registering ACPI NVS region [mem 0x5fff0000-0x5fff2fff] (12288 bytes)
    [ 0.087408] NET: Registered protocol family 16
    [ 0.087567] node 0 link 0: io port [9000, ffff]
    [ 0.087570] TOM: 0000000060000000 aka 1536M
    [ 0.087573] node 0 link 0: mmio [a0000, bffff]
    [ 0.087577] node 0 link 0: mmio [d0000000, fe02ffff]
    [ 0.087580] bus: [00, 02] on node 0 link 0
    [ 0.087583] bus: 00 [io 0x0000-0xffff]
    [ 0.087585] bus: 00 [mem 0x000a0000-0x000bffff]
    [ 0.087587] bus: 00 [mem 0x60000000-0xfcffffffff]
    [ 0.087627] ACPI: bus type pci registered
    [ 0.087696] PCI: Using configuration type 1 for base access
    [ 0.088295] bio: create slab <bio-0> at 0
    [ 0.088374] ACPI: Added _OSI(Module Device)
    [ 0.088376] ACPI: Added _OSI(Processor Device)
    [ 0.088378] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.088380] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.089228] ACPI: EC: Look up EC in DSDT
    [ 0.093337] ACPI: Interpreter enabled
    [ 0.093342] ACPI: (supports S0 S1 S4 S5)
    [ 0.093368] ACPI: Using IOAPIC for interrupt routing
    [ 0.094190] ACPI: Power Resource [ISAV] (on)
    [ 0.099077] ACPI: No dock devices found.
    [ 0.099086] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    [ 0.099148] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.099226] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    [ 0.099229] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    [ 0.099233] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    [ 0.099236] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
    [ 0.099238] pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
    [ 0.099241] PCI: root bus 00: hardware-probed resources
    [ 0.099287] PCI host bridge to bus 0000:00
    [ 0.099291] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    [ 0.099293] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.099296] pci_bus 0000:00: root bus resource [mem 0x60000000-0xfcffffffff]
    [ 0.099312] pci 0000:00:00.0: [10de:00e1] type 00 class 0x060000
    [ 0.099321] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
    [ 0.099381] pci 0000:00:01.0: [10de:00e0] type 00 class 0x060100
    [ 0.099413] pci 0000:00:01.1: [10de:00e4] type 00 class 0x0c0500
    [ 0.099420] pci 0000:00:01.1: reg 10: [io 0xfc00-0xfc1f]
    [ 0.099432] pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
    [ 0.099437] pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
    [ 0.099451] pci 0000:00:01.1: PME# supported from D3hot D3cold
    [ 0.099470] pci 0000:00:02.0: [10de:00e7] type 00 class 0x0c0310
    [ 0.099477] pci 0000:00:02.0: reg 10: [mem 0xfe02f000-0xfe02ffff]
    [ 0.099502] pci 0000:00:02.0: supports D1 D2
    [ 0.099504] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.099518] pci 0000:00:02.1: [10de:00e7] type 00 class 0x0c0310
    [ 0.099525] pci 0000:00:02.1: reg 10: [mem 0xfe02e000-0xfe02efff]
    [ 0.099550] pci 0000:00:02.1: supports D1 D2
    [ 0.099552] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.099567] pci 0000:00:02.2: [10de:00e8] type 00 class 0x0c0320
    [ 0.099575] pci 0000:00:02.2: reg 10: [mem 0xfe02d000-0xfe02d0ff]
    [ 0.099605] pci 0000:00:02.2: supports D1 D2
    [ 0.099607] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.099628] pci 0000:00:06.0: [10de:00ea] type 00 class 0x040100
    [ 0.099635] pci 0000:00:06.0: reg 10: [io 0xf000-0xf0ff]
    [ 0.099640] pci 0000:00:06.0: reg 14: [io 0xec00-0xec7f]
    [ 0.099645] pci 0000:00:06.0: reg 18: [mem 0xfe02c000-0xfe02cfff]
    [ 0.099665] pci 0000:00:06.0: supports D1 D2
    [ 0.099680] pci 0000:00:08.0: [10de:00e5] type 00 class 0x01018a
    [ 0.099696] pci 0000:00:08.0: reg 20: [io 0xe000-0xe00f]
    [ 0.099723] pci 0000:00:09.0: [10de:00ee] type 00 class 0x010185
    [ 0.099730] pci 0000:00:09.0: reg 10: [io 0x09e0-0x09e7]
    [ 0.099735] pci 0000:00:09.0: reg 14: [io 0x0be0-0x0be3]
    [ 0.099740] pci 0000:00:09.0: reg 18: [io 0x0960-0x0967]
    [ 0.099744] pci 0000:00:09.0: reg 1c: [io 0x0b60-0x0b63]
    [ 0.099749] pci 0000:00:09.0: reg 20: [io 0xcc00-0xcc0f]
    [ 0.099754] pci 0000:00:09.0: reg 24: [io 0xc800-0xc87f]
    [ 0.099779] pci 0000:00:0a.0: [10de:00e3] type 00 class 0x010185
    [ 0.099786] pci 0000:00:0a.0: reg 10: [io 0x09f0-0x09f7]
    [ 0.099791] pci 0000:00:0a.0: reg 14: [io 0x0bf0-0x0bf3]
    [ 0.099796] pci 0000:00:0a.0: reg 18: [io 0x0970-0x0977]
    [ 0.099801] pci 0000:00:0a.0: reg 1c: [io 0x0b70-0x0b73]
    [ 0.099806] pci 0000:00:0a.0: reg 20: [io 0xb400-0xb40f]
    [ 0.099810] pci 0000:00:0a.0: reg 24: [io 0xb000-0xb07f]
    [ 0.099834] pci 0000:00:0b.0: [10de:00e2] type 01 class 0x060400
    [ 0.099865] pci 0000:00:0e.0: [10de:00ed] type 01 class 0x060400
    [ 0.099892] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
    [ 0.099913] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
    [ 0.099931] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
    [ 0.099951] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
    [ 0.100003] pci 0000:01:00.0: [10de:0221] type 00 class 0x030000
    [ 0.100017] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.100025] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff pref]
    [ 0.100033] pci 0000:01:00.0: reg 18: [mem 0xfb000000-0xfbffffff]
    [ 0.100056] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.100111] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
    [ 0.100115] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
    [ 0.100119] pci 0000:00:0b.0: bridge window [mem 0xfa000000-0xfcffffff]
    [ 0.100123] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff pref]
    [ 0.100147] pci 0000:02:07.0: [1814:0301] type 00 class 0x028000
    [ 0.100158] pci 0000:02:07.0: reg 10: [mem 0xfdff0000-0xfdff7fff]
    [ 0.100216] pci 0000:02:08.0: [10ec:8139] type 00 class 0x020000
    [ 0.100228] pci 0000:02:08.0: reg 10: [io 0x9c00-0x9cff]
    [ 0.100235] pci 0000:02:08.0: reg 14: [mem 0xfdfff000-0xfdfff0ff]
    [ 0.100260] pci 0000:02:08.0: reg 30: [mem 0x00000000-0x0000ffff pref]
    [ 0.100278] pci 0000:02:08.0: supports D1 D2
    [ 0.100280] pci 0000:02:08.0: PME# supported from D1 D2 D3hot D3cold
    [ 0.100298] pci 0000:02:09.0: [1106:3038] type 00 class 0x0c0300
    [ 0.100326] pci 0000:02:09.0: reg 20: [io 0x9800-0x981f]
    [ 0.100351] pci 0000:02:09.0: supports D1 D2
    [ 0.100354] pci 0000:02:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.100371] pci 0000:02:09.1: [1106:3038] type 00 class 0x0c0300
    [ 0.100399] pci 0000:02:09.1: reg 20: [io 0x9400-0x941f]
    [ 0.100424] pci 0000:02:09.1: supports D1 D2
    [ 0.100427] pci 0000:02:09.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.100445] pci 0000:02:09.2: [1106:3104] type 00 class 0x0c0320
    [ 0.100456] pci 0000:02:09.2: reg 10: [mem 0xfdffe000-0xfdffe0ff]
    [ 0.100499] pci 0000:02:09.2: supports D1 D2
    [ 0.100501] pci 0000:02:09.2: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.100527] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
    [ 0.100531] pci 0000:00:0e.0: bridge window [io 0x9000-0x9fff]
    [ 0.100534] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.100537] pci 0000:00:0e.0: bridge window [mem 0xfde00000-0xfdefffff pref]
    [ 0.100546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.100629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [ 0.100813] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
    [ 0.100901] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
    [ 0.125942] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.125994] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.126043] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.126092] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.126140] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.126195] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.126245] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.126293] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.126341] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.126391] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.126440] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.126489] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.126538] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.126591] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.126640] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.126697] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [ 0.126753] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.126812] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.126889] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
    [ 0.126950] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
    [ 0.127010] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
    [ 0.127070] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
    [ 0.127110] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
    [ 0.127183] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
    [ 0.127250] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0
    [ 0.127316] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
    [ 0.127382] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22 23) *0, disabled.
    [ 0.127449] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
    [ 0.127515] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
    [ 0.127581] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
    [ 0.127647] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
    [ 0.127713] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
    [ 0.127780] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22 23) *0, disabled.
    [ 0.127847] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    [ 0.127919] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    [ 0.127991] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
    [ 0.128144] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.128148] vgaarb: loaded
    [ 0.128149] vgaarb: bridge control possible 0000:01:00.0
    [ 0.128204] PCI: Using ACPI for IRQ routing
    [ 0.128208] PCI: pci_cache_line_size set to 64 bytes
    [ 0.128221] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xefffffff pref] conflicts with GART [mem 0xe0000000-0xefffffff]
    [ 0.128280] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
    [ 0.128283] e820: reserve RAM buffer [mem 0x5fff0000-0x5fffffff]
    [ 0.128429] NetLabel: Initializing
    [ 0.128430] NetLabel: domain hash size = 128
    [ 0.128432] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.128453] NetLabel: unlabeled traffic allowed by default
    [ 0.139353] pnp: PnP ACPI init
    [ 0.139383] ACPI: bus type pnp registered
    [ 0.139432] pnp 00:00: [io 0x4000-0x407f]
    [ 0.139434] pnp 00:00: [io 0x4080-0x40ff]
    [ 0.139437] pnp 00:00: [io 0x4400-0x447f]
    [ 0.139439] pnp 00:00: [io 0x4480-0x44ff]
    [ 0.139441] pnp 00:00: [io 0x4800-0x487f]
    [ 0.139444] pnp 00:00: [io 0x4880-0x48ff]
    [ 0.139550] system 00:00: [io 0x4000-0x407f] has been reserved
    [ 0.139554] system 00:00: [io 0x4080-0x40ff] has been reserved
    [ 0.139557] system 00:00: [io 0x4400-0x447f] has been reserved
    [ 0.139560] system 00:00: [io 0x4480-0x44ff] has been reserved
    [ 0.139563] system 00:00: [io 0x4800-0x487f] has been reserved
    [ 0.139566] system 00:00: [io 0x4880-0x48ff] has been reserved
    [ 0.139572] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.139776] pnp 00:01: [mem 0x0009e000-0x000a1fff]
    [ 0.139779] pnp 00:01: [mem 0x000cec00-0x000cffff]
    [ 0.139781] pnp 00:01: [mem 0x000f0000-0x000fbfff]
    [ 0.139784] pnp 00:01: [mem 0x000fc000-0x000fffff]
    [ 0.139786] pnp 00:01: [mem 0x5fff0000-0x5fffffff]
    [ 0.139789] pnp 00:01: [mem 0xffff0000-0xffffffff]
    [ 0.139792] pnp 00:01: [mem 0x00000000-0x0009ffff]
    [ 0.139794] pnp 00:01: [mem 0x00100000-0x5ffeffff]
    [ 0.139797] pnp 00:01: [mem 0xfec00000-0xfec00fff]
    [ 0.139799] pnp 00:01: [mem 0xfee00000-0xfeefffff]
    [ 0.139802] pnp 00:01: [mem 0xfefff000-0xfeffffff]
    [ 0.139804] pnp 00:01: [mem 0xfff80000-0xfff80fff]
    [ 0.139807] pnp 00:01: [mem 0xfff90000-0xfffbffff]
    [ 0.139809] pnp 00:01: [mem 0xfffed000-0xfffeffff]
    [ 0.139815] pnp 00:01: disabling [mem 0x0009e000-0x000a1fff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
    [ 0.139819] pnp 00:01: disabling [mem 0x000cec00-0x000cffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
    [ 0.139823] pnp 00:01: disabling [mem 0x000f0000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
    [ 0.139827] pnp 00:01: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
    [ 0.139830] pnp 00:01: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
    [ 0.139834] pnp 00:01: disabling [mem 0x00100000-0x5ffeffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
    [ 0.139885] system 00:01: [mem 0x5fff0000-0x5fffffff] could not be reserved
    [ 0.139889] system 00:01: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.139892] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.139895] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
    [ 0.139898] system 00:01: [mem 0xfefff000-0xfeffffff] has been reserved
    [ 0.139902] system 00:01: [mem 0xfff80000-0xfff80fff] has been reserved
    [ 0.139905] system 00:01: [mem 0xfff90000-0xfffbffff] has been reserved
    [ 0.139908] system 00:01: [mem 0xfffed000-0xfffeffff] has been reserved
    [ 0.139912] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.139976] pnp 00:02: [bus 00-ff]
    [ 0.140003] pnp 00:02: [io 0x0cf8-0x0cff]
    [ 0.140006] pnp 00:02: [io 0x0cf0-0x0cf3]
    [ 0.140009] pnp 00:02: [io 0x0000-0x0cf7 window]
    [ 0.140011] pnp 00:02: [io 0x0d00-0xffff window]
    [ 0.140014] pnp 00:02: [mem 0x000a0000-0x000bffff window]
    [ 0.140017] pnp 00:02: [mem 0x000c0000-0x000dffff window]
    [ 0.140020] pnp 00:02: [mem 0x60000000-0xfebfffff window]
    [ 0.140101] pnp 00:02: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.140629] pnp 00:03: [io 0x0010-0x001f]
    [ 0.140631] pnp 00:03: [io 0x0022-0x003f]
    [ 0.140634] pnp 00:03: [io 0x0044-0x005f]
    [ 0.140636] pnp 00:03: [io 0x0062-0x0063]
    [ 0.140639] pnp 00:03: [io 0x0065-0x006f]
    [ 0.140641] pnp 00:03: [io 0x0074-0x007f]
    [ 0.140644] pnp 00:03: [io 0x0091-0x0093]
    [ 0.140646] pnp 00:03: [io 0x00a2-0x00bf]
    [ 0.140648] pnp 00:03: [io 0x00e0-0x00ef]
    [ 0.140651] pnp 00:03: [io 0x0b78-0x0b7b]
    [ 0.140653] pnp 00:03: [io 0x0f78-0x0f7b]
    [ 0.140656] pnp 00:03: [io 0x0a78-0x0a7b]
    [ 0.140658] pnp 00:03: [io 0x0e78-0x0e7b]
    [ 0.140660] pnp 00:03: [io 0x0bbc-0x0bbf]
    [ 0.140663] pnp 00:03: [io 0x0fbc-0x0fbf]
    [ 0.140665] pnp 00:03: [io 0x04d0-0x04d1]
    [ 0.140741] system 00:03: [io 0x0b78-0x0b7b] has been reserved
    [ 0.140744] system 00:03: [io 0x0f78-0x0f7b] has been reserved
    [ 0.140748] system 00:03: [io 0x0a78-0x0a7b] has been reserved
    [ 0.140751] system 00:03: [io 0x0e78-0x0e7b] has been reserved
    [ 0.140754] system 00:03: [io 0x0bbc-0x0bbf] has been reserved
    [ 0.140757] system 00:03: [io 0x0fbc-0x0fbf] has been reserved
    [ 0.140760] system 00:03: [io 0x04d0-0x04d1] has been reserved
    [ 0.140763] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.140777] pnp 00:04: [dma 4]
    [ 0.140780] pnp 00:04: [io 0x0000-0x000f]
    [ 0.140782] pnp 00:04: [io 0x0080-0x0090]
    [ 0.140785] pnp 00:04: [io 0x0094-0x009f]
    [ 0.140787] pnp 00:04: [io 0x00c0-0x00df]
    [ 0.140832] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.140844] pnp 00:05: [io 0x0070-0x0073]
    [ 0.140862] pnp 00:05: [irq 8]
    [ 0.140904] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.140914] pnp 00:06: [io 0x0061]
    [ 0.140959] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.140969] pnp 00:07: [io 0x00f0-0x00ff]
    [ 0.140976] pnp 00:07: [irq 13]
    [ 0.141019] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.141243] pnp 00:08: [io 0x03f8-0x03ff]
    [ 0.141251] pnp 00:08: [irq 4]
    [ 0.141340] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.141514] pnp 00:09: [io 0x02f8-0x02ff]
    [ 0.141522] pnp 00:09: [irq 3]
    [ 0.141596] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.141881] pnp 00:0a: [io 0x0378-0x037f]
    [ 0.141883] pnp 00:0a: [io 0x0778-0x077b]
    [ 0.141890] pnp 00:0a: [irq 7]
    [ 0.141960] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
    [ 0.142046] pnp 00:0b: [io 0x0060]
    [ 0.142049] pnp 00:0b: [io 0x0064]
    [ 0.142055] pnp 00:0b: [irq 1]
    [ 0.142106] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.142129] pnp: PnP ACPI: found 12 devices
    [ 0.142131] ACPI: ACPI bus type pnp unregistered
    [ 0.148689] Switching to clocksource acpi_pm
    [ 0.148760] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
    [ 0.148765] pci 0000:00:0b.0: PCI bridge to [bus 01-01]
    [ 0.148769] pci 0000:00:0b.0: bridge window [io 0xa000-0xafff]
    [ 0.148774] pci 0000:00:0b.0: bridge window [mem 0xfa000000-0xfcffffff]
    [ 0.148778] pci 0000:00:0b.0: bridge window [mem 0xd0000000-0xdfffffff pref]
    [ 0.148787] pci 0000:02:08.0: BAR 6: assigned [mem 0xfde00000-0xfde0ffff pref]
    [ 0.148790] pci 0000:00:0e.0: PCI bridge to [bus 02-02]
    [ 0.148793] pci 0000:00:0e.0: bridge window [io 0x9000-0x9fff]
    [ 0.148796] pci 0000:00:0e.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.148799] pci 0000:00:0e.0: bridge window [mem 0xfde00000-0xfdefffff pref]
    [ 0.148814] pci 0000:00:0e.0: setting latency timer to 64
    [ 0.148818] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    [ 0.148821] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    [ 0.148824] pci_bus 0000:00: resource 6 [mem 0x60000000-0xfcffffffff]
    [ 0.148827] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
    [ 0.148829] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
    [ 0.148832] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
    [ 0.148835] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
    [ 0.148837] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
    [ 0.148840] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff pref]
    [ 0.148906] NET: Registered protocol family 2
    [ 0.149029] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.149029] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    [ 0.153406] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.154706] TCP: Hash tables configured (established 262144 bind 65536)
    [ 0.154710] TCP: reno registered
    [ 0.154724] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.154769] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.154934] NET: Registered protocol family 1
    [ 0.155185] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    [ 0.223475] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
    [ 0.290128] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
    [ 0.290189] pci 0000:01:00.0: Boot video device
    [ 0.290265] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    [ 0.290348] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
    [ 0.290425] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
    [ 0.290445] PCI: CLS 32 bytes, default 64
    [ 0.290526] Unpacking initramfs...
    [ 0.372340] Freeing initrd memory: 2940k freed
    [ 0.379476] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
    [ 0.379485] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
    [ 0.379493] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
    [ 0.388295] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
    [ 0.388742] audit: initializing netlink socket (disabled)
    [ 0.388762] type=2000 audit(1346927638.386:1): initialized
    [ 0.402840] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.405016] VFS: Disk quotas dquot_6.5.2
    [ 0.405085] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.405228] msgmni has been set to 2998
    [ 0.405471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.405502] io scheduler noop registered
    [ 0.405504] io scheduler deadline registered
    [ 0.405574] io scheduler cfq registered (default)
    [ 0.412567] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    [ 0.412569] vesafb: scrolling: redraw
    [ 0.412572] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.412814] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000900000, using 5120k, total 5120k
    [ 0.475467] Console: switching to colour frame buffer device 160x64
    [ 0.537946] fb0: VESA VGA frame buffer device
    [ 0.538002] GHES: HEST is not enabled!
    [ 0.538068] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.558511] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.578950] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 0.599584] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.620075] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [ 0.620233] Linux agpgart interface v0.103
    [ 0.620290] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.620292] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.620995] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.621096] mousedev: PS/2 mouse device common for all mice
    [ 0.621204] rtc_cmos 00:05: RTC can wake from S4
    [ 0.621333] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.621357] rtc0: alarms up to one year, y3k, 242 bytes nvram
    [ 0.621367] cpuidle: using governor ladder
    [ 0.621370] cpuidle: using governor menu
    [ 0.621586] drop_monitor: Initializing network drop monitor service
    [ 0.621691] TCP: cubic registered
    [ 0.621838] NET: Registered protocol family 10
    [ 0.622084] NET: Registered protocol family 17
    [ 0.622099] Key type dns_resolver registered
    [ 0.622262] PM: Hibernation image not present or could not be loaded.
    [ 0.622282] registered taskstats version 1
    [ 0.622840] rtc_cmos 00:05: setting system clock to 2012-09-06 10:33:58 UTC (1346927638)
    [ 0.624542] Freeing unused kernel memory: 756k freed
    [ 0.625249] Write protecting the kernel read-only data: 8192k
    [ 0.631386] Freeing unused kernel memory: 1496k freed
    [ 0.635859] Freeing unused kernel memory: 616k freed
    [ 0.647736] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.654805] systemd-udevd[38]: starting version 189
    [ 0.730408] ACPI: bus type usb registered
    [ 0.730453] usbcore: registered new interface driver usbfs
    [ 0.730468] usbcore: registered new interface driver hub
    [ 0.735252] usbcore: registered new device driver usb
    [ 0.735879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.739107] SCSI subsystem initialized
    [ 0.746050] ehci_hcd 0000:00:02.2: setting latency timer to 64
    [ 0.746058] ehci_hcd 0000:00:02.2: EHCI Host Controller
    [ 0.746075] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
    [ 0.746108] ehci_hcd 0000:00:02.2: debug port 1
    [ 0.746114] ehci_hcd 0000:00:02.2: cache line size of 32 is not supported
    [ 0.746141] ehci_hcd 0000:00:02.2: irq 21, io mem 0xfe02d000
    [ 0.749031] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.750857] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.753402] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
    [ 0.753609] hub 1-0:1.0: USB hub found
    [ 0.753616] hub 1-0:1.0: 8 ports detected
    [ 0.753784] uhci_hcd 0000:02:09.0: UHCI Host Controller
    [ 0.753793] uhci_hcd 0000:02:09.0: new USB bus registered, assigned bus number 2
    [ 0.753839] uhci_hcd 0000:02:09.0: irq 19, io base 0x00009800
    [ 0.753984] hub 2-0:1.0: USB hub found
    [ 0.753989] hub 2-0:1.0: 2 ports detected
    [ 0.754706] libata version 3.00 loaded.
    [ 0.756811] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [ 0.756817] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [ 0.756829] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
    [ 0.756869] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
    [ 0.757452] uhci_hcd 0000:02:09.1: UHCI Host Controller
    [ 0.757461] uhci_hcd 0000:02:09.1: new USB bus registered, assigned bus number 4
    [ 0.757493] uhci_hcd 0000:02:09.1: irq 16, io base 0x00009400
    [ 0.757704] hub 4-0:1.0: USB hub found
    [ 0.757711] hub 4-0:1.0: 2 ports detected
    [ 0.761428] ehci_hcd 0000:02:09.2: EHCI Host Controller
    [ 0.761447] ehci_hcd 0000:02:09.2: new USB bus registered, assigned bus number 5
    [ 0.761512] ehci_hcd 0000:02:09.2: irq 17, io mem 0xfdffe000
    [ 0.770064] ehci_hcd 0000:02:09.2: USB 2.0 started, EHCI 1.00
    [ 0.770287] hub 5-0:1.0: USB hub found
    [ 0.770294] hub 5-0:1.0: 4 ports detected
    [ 0.812239] hub 3-0:1.0: USB hub found
    [ 0.812251] hub 3-0:1.0: 4 ports detected
    [ 0.816572] ohci_hcd 0000:00:02.1: setting latency timer to 64
    [ 0.816577] ohci_hcd 0000:00:02.1: OHCI Host Controller
    [ 0.816589] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 6
    [ 0.816630] ohci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
    [ 0.868954] hub 6-0:1.0: USB hub found
    [ 0.868962] hub 6-0:1.0: 4 ports detected
    [ 0.873501] sata_nv 0000:00:09.0: version 3.5
    [ 0.873756] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
    [ 0.873833] sata_nv 0000:00:09.0: setting latency timer to 64
    [ 0.874345] scsi0 : sata_nv
    [ 0.874497] scsi1 : sata_nv
    [ 0.874645] ata1: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 20
    [ 0.874648] ata2: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 20
    [ 0.878342] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
    [ 0.878391] sata_nv 0000:00:0a.0: setting latency timer to 64
    [ 0.878840] scsi2 : sata_nv
    [ 0.878963] scsi3 : sata_nv
    [ 0.879110] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xb400 irq 23
    [ 0.879112] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xb408 irq 23
    [ 0.886479] pata_acpi 0000:00:08.0: power state changed by ACPI to D0
    [ 0.886484] pata_acpi 0000:00:08.0: power state changed by ACPI to D0
    [ 0.886533] pata_acpi 0000:00:08.0: setting latency timer to 64
    [ 1.186695] ata1: SATA link down (SStatus 0 SControl 300)
    [ 1.343364] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.350214] ata3.00: ATA-7: SAMSUNG SP1614C, SW100-34, max UDMA7
    [ 1.350217] ata3.00: 312581808 sectors, multi 16: LBA48
    [ 1.356871] ata3.00: configured for UDMA/133
    [ 1.370024] usb 4-1: new low-speed USB device number 2 using uhci_hcd
    [ 1.500024] ata2: SATA link down (SStatus 0 SControl 300)
    [ 1.500200] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP1614C SW10 PQ: 0 ANSI: 5
    [ 1.966704] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.020180] ata4.00: ATA-8: WDC WD15EARS-00Z5B1, 80.00A80, max UDMA/133
    [ 2.020183] ata4.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.033588] ata4.00: configured for UDMA/133
    [ 2.033760] scsi 3:0:0:0: Direct-Access ATA WDC WD15EARS-00Z 80.0 PQ: 0 ANSI: 5
    [ 2.036921] pata_amd 0000:00:08.0: version 0.4.1
    [ 2.036948] pata_amd 0000:00:08.0: power state changed by ACPI to D0
    [ 2.036952] pata_amd 0000:00:08.0: power state changed by ACPI to D0
    [ 2.037017] pata_amd 0000:00:08.0: setting latency timer to 64
    [ 2.040074] scsi4 : pata_amd
    [ 2.041581] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [ 2.041663] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.041667] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.041692] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.042020] scsi5 : pata_amd
    [ 2.042592] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
    [ 2.042595] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
    [ 2.042887] sd 3:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
    [ 2.042937] sd 3:0:0:0: [sdb] Write Protect is off
    [ 2.042941] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 2.042964] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.055764] sdb: sdb1
    [ 2.056082] sd 3:0:0:0: [sdb] Attached SCSI disk
    [ 2.056117] usbcore: registered new interface driver usbhid
    [ 2.056119] usbhid: USB HID core driver
    [ 2.073368] sda: sda1 sda2 sda3 sda4
    [ 2.073827] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.200466] ata5.00: ATA-6: ST340810A, 3.39, max UDMA/100
    [ 2.200473] ata5.00: 78165360 sectors, multi 16: LBA
    [ 2.200484] ata5: nv_mode_filter: 0x3f39f&0x739f->0x739f, BIOS=0x7000 (0xc000c000) ACPI=0x701f (60:120:0x1b)
    [ 2.213741] ata5.00: configured for UDMA/33
    [ 2.213893] scsi 4:0:0:0: Direct-Access ATA ST340810A 3.39 PQ: 0 ANSI: 5
    [ 2.214133] sd 4:0:0:0: [sdc] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
    [ 2.214189] sd 4:0:0:0: [sdc] Write Protect is off
    [ 2.214193] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 2.214216] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.244630] sdc: sdc1
    [ 2.244919] sd 4:0:0:0: [sdc] Attached SCSI disk
    [ 2.373623] ata6.00: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33
    [ 2.373634] ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c000) ACPI=0x701f (60:120:0x1b)
    [ 2.386892] ata6.00: configured for UDMA/33
    [ 2.388189] scsi 5:0:0:0: CD-ROM _NEC DVD_RW ND-3540A 1.01 PQ: 0 ANSI: 5
    [ 2.391609] input: OM as /devices/pci0000:00/0000:00:0e.0/0000:02:09.1/usb4/4-1/4-1:1.0/input/input1
    [ 2.393267] hid-generic 0003:04F3:0234.0001: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-0000:02:09.1-1/input0
    [ 2.397693] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [ 2.397702] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.397986] sr 5:0:0:0: Attached scsi CD-ROM sr0
    [ 3.150376] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.949356] systemd[1]: Successfully opened /dev/kmsg for logging.
    [ 3.949760] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpuset of type cgroup with options cpuset.
    [ 3.949905] systemd[1]: Mounting cgroup to /sys/fs/cgroup/cpu,cpuacct of type cgroup with options cpu,cpuacct.
    [ 3.950054] systemd[1]: Mounting cgroup to /sys/fs/cgroup/memory of type cgroup with options memory.
    [ 3.950167] systemd[1]: Mounting cgroup to /sys/fs/cgroup/devices of type cgroup with options devices.
    [ 3.953404] systemd[1]: Mounting cgroup to /sys/fs/cgroup/freezer of type cgroup with options freezer.
    [ 3.953500] systemd[1]: Mounting cgroup to /sys/fs/cgroup/net_cls of type cgroup with options net_cls.
    [ 3.953597] systemd[1]: Mounting cgroup to /sys/fs/cgroup/blkio of type cgroup with options blkio.
    [ 3.956761] systemd[1]: systemd 189 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 3.979310] systemd[1]: Your kernel apparently lacks built-in autofs4 support. Might be a good idea to compile it in. We'll now try to work around this by loading the module...
    [ 4.144298] systemd[1]: Inserted module 'autofs4'
    [ 4.152053] systemd[1]: Set hostname to <box>.
    [ 4.157882] systemd[1]: Using cgroup controller name=systemd. File system hierarchy is at /sys/fs/cgroup/systemd/system.
    [ 4.157991] systemd[1]: Installed release agent.
    [ 4.158142] systemd[1]: Created root group.
    [ 4.158219] systemd[1]: Using notification socket @/org/freedesktop/systemd1/notify
    [ 4.158401] systemd[1]: Successfully created private D-Bus server.
    [ 4.184882] systemd[1]: Spawned /usr/lib/systemd/system-generators/systemd-cryptsetup-generator as 114
    [ 4.185117] systemd[1]: Spawned /usr/lib/systemd/system-generators/systemd-system-update-generator as 115
    [ 4.185365] systemd[1]: Spawned /usr/lib/systemd/system-generators/systemd-getty-generator as 116
    [ 4.185641] systemd[1]: Spawned /usr/lib/systemd/system-generators/systemd-fstab-generator as 117
    [ 4.255375] systemd[1]: /usr/lib/systemd/system-generators/systemd-cryptsetup-generator exited successfully.
    [ 4.255400] systemd[1]: /usr/lib/systemd/system-generators/systemd-system-update-generator exited successfully.
    [ 4.255408] systemd[1]: /usr/lib/systemd/system-generators/systemd-getty-generator exited successfully.
    [ 4.255416] systemd[1]: /usr/lib/systemd/system-generators/systemd-fstab-generator exited successfully.
    [ 4.313459] systemd[1]: Looking for unit files in:
    [ 4.313463] systemd[1]: /etc/systemd/system
    [ 4.313465] systemd[1]: /run/systemd/generator
    [ 4.313468] systemd[1]: /usr/lib/systemd/system
    [ 4.313471] systemd[1]: Disabled SysV init scripts and rcN.d links support
    [ 4.422041] systemd[1]: Failed to load configuration for syslog.service: No such file or directory
    [ 4.495651] systemd[1]: Failed to load configuration for plymouth-start.service: No such file or directory
    [ 4.564783] systemd[1]: Failed to load configuration for rc-local.service: No such file or directory
    [ 4.564799] systemd[1]: Failed to load configuration for plymouth-quit-wait.service: No such file or directory
    [ 4.709247] systemd[1]: Failed to load configuration for auditd.service: No such file or directory
    [ 4.752803] systemd[1]: -.mount changed dead -> mounted
    [ 4.752894] systemd[1]: Activating default unit: default.target
    [ 4.752901] systemd[1]: Trying to enqueue job graphical.target/start/replace
    [ 4.753079] systemd[1]: Installed new job graphical.target/start as 1
    [ 4.753085] systemd[1]: Installed new job multi-user.target/start as 2
    [ 4.753089] systemd[1]: Installed new job basic.target/start as 3
    [ 4.753094] systemd[1]: Installed new job sysinit.target/start as 4
    [ 4.753098] systemd[1]: Installed new job local-fs.target/start as 5
    [ 4.753102] systemd[1]: Installed new job home-hasardeur-Ext.mount/start as 6
    [ 4.753108] systemd[1]: Installed new job systemd-journald.socket/start as 7
    [ 4.753112] systemd[1]: Installed new job systemd-fsck@dev-disk-by\x2duuid-1A54880F5487EBB7.service/start as 9
    [ 4.753116] systemd[1]: Installed new job dev-disk-by\x2duuid-1A54880F5487EBB7.device/start as 10
    [ 4.753138] systemd[1]: Installed new job local-fs-pre.target/start as 11
    [ 4.753142] systemd[1]: Installed new job home-hasardeur-Space.mount/start as 14
    [ 4.753147] systemd[1]: Installed new job systemd-fsck@dev-disk-by\x2duuid-72290182\x2d7429\x2d4fb3\x2da421\x2d1e3bdf21dda9.service/start as 15
    [ 4.753151] systemd[1]: Installed new job dev-disk-by\x2duuid-72290182\x2d7429\x2d4fb3\x2da421\x2d1e3bdf21dda9.device/start as 16
    [ 4.753161] systemd[1]: Installed new job tmp.mount/start as 17
    [ 4.753164] systemd[1]: Installed new job systemd-fsck-root.service/start as 18
    [ 4.753168] systemd[1]: Installed new job systemd-remount-fs.service/start as 19
    [ 4.753172] systemd[1]: Installed new job swap.target/start as 20
    [ 4.753176] systemd[1]: Installed new job dev-disk-by\x2duuid-b5f8685d\x2d2706\x2d44fc\x2d882d\x2d662cc23e7c07.swap/start as 21
    [ 4.753181] systemd[1]: Installed new job dev-disk-by\x2duuid-b5f8685d\x2d2706\x2d44fc\x2d882d\x2d662cc23e7c07.device/start as 22
    [ 4.753191] systemd[1]: Installed new job systemd-udevd.service/start as 23
    [ 4.753195] systemd[1]: Installed new job systemd-udevd-control.socket/start as 24
    [ 4.753198] systemd[1]: Installed new job systemd-udevd-kernel.socket/start as 25
    [ 4.753202] systemd[1]: Installed new job dev-mqueue.mount/start as 26
    [ 4.753206] systemd[1]: Installed new job sys-kernel-config.mount/start as 27
    [ 4.753209] systemd[1]: Installed new job systemd-random-seed-load.service/start as 28
    [ 4.753213] systemd[1]: Installed new job systemd-ask-password-console.path/start as 29
    [ 4.753217] systemd[1]: Installed new job systemd-udev-trigger.service/start as 30
    [ 4.753220] systemd[1]: Installed new job sys-kernel-debug.mount/start as 31
    [ 4.753224] systemd[1]: Installed new job systemd-modules-load.service/start as 32
    [ 4.753228] systemd[1]: Installed new job sys-fs-fuse-connections.mount/start as 33
    [ 4.753231] systemd[1]: Installed new job proc-sys-fs-binfmt_misc.automount/start as 34
    [ 4.753235] systemd[1]: Installed new job systemd-journald.service/start as 35
    [ 4.753239] systemd[1]: Installed new job systemd-journal-flush.service/start as 36
    [ 4.753242] systemd[1]: Installed new job dev-hugepages.mount/start as 37
    [ 4.753246] systemd[1]: Installed new job systemd-tmpfiles-setup.service/start as 38
    [ 4.753249] systemd[1]: Installed new job cryptsetup.target/start as 39
    [ 4.753253] systemd[1]: Installed new job systemd-sysctl.service/start as 40
    [ 4.753256] systemd[1]: Installed new job systemd-vconsole-setup.service/start as 41
    [ 4.753260] systemd[1]: Installed new job systemd-binfmt.service/start as 42
    [ 4.753263] systemd[1]: Installed new job sockets.target/start as 45
    [ 4.753267] systemd[1]: Installed new job dbus.socket/start as 46
    [ 4.753271] systemd[1]: Installed new job systemd-initctl.socket/start as 47
    [ 4.753274] systemd[1]: Installed new job systemd-shutdownd.socket/start as 48
    [ 4.753278] systemd[1]: Installed new job alsa-restore.service/start as 49
    [ 4.753281] systemd[1]: Installed new job console-kit-log-system-start.service/start as 50
    [ 4.753285] systemd[1]: Installed new job systemd-tmpfiles-clean.timer/start as 51
    [ 4.753289] systemd[1]: Installed new job ntpd.service/start as 52
    [ 4.753292] systemd[1]: Installed new job remote-fs.target/start as 53
    [ 4.753296] systemd[1]: Installed new job netcfg.service/start as 54
    [ 4.753299] systemd[1]: Installed new job network.target/start as 55
    [ 4.753302] systemd[1]: Installed new job cronie.service/start as 56
    [ 4.753306] systemd[1]: Installed new job getty.target/start as 57
    [ 4.753309] systemd[1]: Installed new job [email protected]/start as 58
    [ 4.753313] systemd[1]: Installed new job systemd-ask-password-wall.path/start as 59
    [ 4.753316] systemd[1]: Installed new job dbus.service/start as 60
    [ 4.753320] systemd[1]: Installed new job systemd-logind.service/start as 61
    [ 4.753323] systemd[1]: Installed new job systemd-user-sessions.service/start as 62
    [ 4.753327] systemd[1]: Installed new job systemd-update-utmp-runlevel.service/start as 63
    [ 4.753331] systemd[1]: Installed new job lxdm.service/start as 66
    [ 4.753365] systemd[1]: Enqueued job graphical.target/start as 1
    [ 4.753380] systemd[1]: Loaded units and determined initial transaction in 594ms 940us.
    [ 4.753507] systemd[1]: Got SIGCHLD for process 113 (switch_root)
    [ 4.753580] systemd[1]: Child 113 died (code=exited, status=0/SUCCESS)
    [ 4.753667] systemd[1]: systemd-ask-password-wall.path changed dead -> waiting
    [ 4.753676] systemd[1]: Job systemd-ask-password-wall.path/start finished, result=done
    [ 4.753692] systemd[1]: remote-fs.target changed dead -> active
    [ 4.753700] systemd[1]: Job remote-fs.target/start finished, result=done
    [ 4.753747] systemd[1]: systemd-shutdownd.socket changed dead -> listening
    [ 4.753755] systemd[1]: Job systemd-shutdownd.socket/start finished, result=done
    [ 4.753786] systemd[1]: systemd-initctl.socket changed dead -> listening
    [ 4.753793] systemd[1]: Job systemd-initctl.socket/start finished, result=done
    [ 4.753807] systemd[1]: cryptsetup.target changed dead -> active
    [ 4.753815] systemd[1]: Job cryptsetup.target/start finished, result=done
    [ 4.753875] systemd[1]: Autofs kernel version 1.0
    [ 4.753969] systemd[1]: Autofs protocol version 5.2
    [ 4.753979] systemd[1]: proc-sys-fs-binfmt_misc.automount changed dead -> waiting
    [ 4.753987] systemd[1]: Job proc-sys-fs-binfmt_misc.automount/start finished, result=done
    [ 4.754036] systemd[1]: systemd-ask-password-console.path changed dead -> waiting
    [ 4.754044] systemd[1]: Job systemd-ask-password-console.path/start finished, result=done
    [ 4.754155] systemd[1]: systemd-udevd-kernel.socket changed dead -> listening
    [ 4.754164] systemd[1]: Job systemd-udevd-kernel.socket/start finished, result=done
    [ 4.754246] systemd[1]: systemd-udevd-control.socket changed dead -> listening
    [ 4.754254] systemd[1]: Job systemd-udevd-control.socket/start finished, result=done
    [ 4.754341] systemd[1]: systemd-journald.socket changed dead -> listening
    [ 4.754349] systemd[1]: Job systemd-journald.socket/start finished, result=done
    [ 4.754375] systemd[1]: Starting of systemd-fsck-root.service requested but condition failed. Ignoring.
    [ 4.754379] systemd[1]: Job systemd-fsck-root.service/start finished, result=done
    [ 4.754453] systemd[1]: About to execute: /usr/lib/systemd/systemd-remount-fs
    [ 4.758929] systemd[1]: Forked /usr/lib/systemd/systemd-remount-fs as 118
    [ 4.759050] systemd[1]: systemd-remount-fs.service changed dead -> start
    [ 4.759250] systemd[1]: About to execute: /usr/lib/systemd/systemd-udevd
    [ 4.826866] systemd[1]: Forked /usr/lib/systemd/systemd-udevd as 120
    [ 4.826993] systemd[1]: systemd-udevd.service changed dead -> start
    [ 4.827101] systemd[1]: About to execute: /bin/mount mqueue /dev/mqueue -t mqueue
    [ 4.828859] systemd[1]: Forked /bin/mount as 121
    [ 4.828923] systemd[1]: dev-mqueue.mount changed dead -> mounting
    [ 4.829234] systemd[1]: About to execute: /usr/bin/udevadm trigger --type=subsystems --action=add
    [ 4.833375] systemd[1]: Forked /usr/bin/udevadm as 122
    [ 4.833513] systemd[1]: systemd-udev-trigger.service changed dead -> start
    [ 4.833594] systemd[1]: About to execute: /bin/mount debugfs /sys/kernel/debug -t debugfs
    [ 4.834846] systemd[1]: Forked /bin/mount as 123
    [ 4.834893] systemd[1]: sys-kernel-debug.mount changed dead -> mounting
    [ 4.859660] systemd[1]: About to execute: /usr/lib/systemd/systemd-modules-load
    [ 4.860937] systemd[1]: Forked /usr/lib/systemd/systemd-modules-load as 124
    [ 4.861068] systemd[1]: systemd-modules-load.service changed dead -> start
    [ 4.861180] systemd[1]: About to execute: /bin/mount hugetlbfs /dev/hugepages -t hugetlbfs
    [ 4.863410] systemd[1]: Forked /bin/mount as 125
    [ 4.863451] systemd[1]: dev-hugepages.mount changed dead -> mounting
    [ 4.917003] systemd[1]: About to execute: /usr/lib/systemd/systemd-sysctl
    [ 4.918344] systemd[1]: Forked /usr/lib/systemd/systemd-sysctl as 126
    [ 4.918493] systemd[1]: systemd-sysctl.service changed dead -> start
    [ 4.918602] systemd[1]: About to execute: /usr/lib/systemd/systemd-vconsole-setup
    [ 4.920070] systemd[1]: Forked /usr/lib/systemd/systemd-vconsole-setup as 127
    [ 4.920224] systemd[1]: systemd-vconsole-setup.service changed dead -> start
    [ 4.926908] systemd[1]: Starting of systemd-binfmt.service requested but condition failed. Ignoring.
    [ 4.926918] systemd[1]: Job systemd-binfmt.service/start finished, result=done
    [ 4.927036] systemd[1]: About to execute: /usr/lib/systemd/systemd-journald
    [ 4.928214] systemd[1]: Forked /usr/lib/systemd/systemd-journald as 128
    [ 4.928417] systemd[1]: systemd-journald.service changed dead -> running
    [ 4.928436] systemd[1]: Job systemd-journald.service/start finished, result=done
    [ 4.928562] systemd[1]: Running GC...
    [ 4.929089] systemd[1]: Received SIGCHLD from PID 116 (n/a).
    [ 4.929352] systemd[1]: Incoming traffic on systemd-journald.socket
    [ 4.929370] systemd[1]: systemd-journald.socket changed listening -> running
    [ 4.957457] systemd[1]: Got notification message for unit systemd-udevd.service
    [ 4.957468] systemd[1]: systemd-udevd.service: Got message
    [ 4.957473] systemd[1]: systemd-udevd.service: got READY=1
    [ 4.957551] systemd[1]: systemd-udevd.service changed start -> running
    [ 4.957567] systemd[1]: Job systemd-udevd.service/start finished, result=done
    [ 4.957642] systemd-udevd[120]: starting version 189
    [ 5.064497] systemd[1]: Incoming traffic on systemd-udevd-kernel.socket
    [ 5.064520] systemd[1]: systemd-udevd-kernel.socket changed listening -> running
    [ 5.066198] systemd[1]: Received SIGCHLD from PID 122 (udevadm).
    [ 5.066234] systemd[1]: Got SIGCHLD for process 122 (udevadm)
    [ 5.066313] systemd[1]: Child 122 died (code=exited, status=0/SUCCESS)
    [ 5.066317] systemd[1]: Child 122 belongs to systemd-udev-trigger.service
    [ 5.066333] systemd[1]: systemd-udev-trigger.service: main process exited, code=exited, status=0
    [ 5.066341] systemd[1]: systemd-udev-trigger.service running next main command for state start
    [ 5.066359] systemd[1]: About to execute: /usr/bin/udevadm trigger --type=devices --action=add
    [ 5.067931] systemd[1]: Forked /usr/bin/udevadm as 130
    [ 5.083596] systemd[1]: Received SIGCHLD from PID 130 (udevadm).
    [ 5.083638] systemd[1]: Got SIGCHLD for process 130 (udevadm)
    [ 5.083717] systemd[1]: Child 130 died (code=exited, status=0/SUCCESS)
    [ 5.083721] systemd[1]: Child 130 belongs to systemd-udev-trigger.service
    [ 5.083737] systemd[1]: systemd-udev-trigger.service: main process exited, code=exited, status=0
    [ 5.084106] systemd[1]: systemd-udev-trigger.service changed start -> exited
    [ 5.084118] systemd[1]: Job systemd-udev-trigger.service/start finished, result=done
    [ 5.088748] systemd[1]: Received SIGCHLD from PID 126 (systemd-sysctl).
    [ 5.088779] systemd[1]: Got SIGCHLD for process 126 (systemd-sysctl)
    [ 5.088852] systemd[1]: Child 126 died (code=exited, status=0/SUCCESS)
    [ 5.088856] systemd[1]: Child 126 belongs to systemd-sysctl.service
    [ 5.088873] systemd[1]: systemd-sysctl.service: main process exited, code=exited, status=0
    [ 5.089199] systemd[1]: systemd-sysctl.service changed start -> exited
    [ 5.089210] systemd[1]: Job systemd-sysctl.service/start finished, result=done
    [ 5.336181] FS-Cache: Loaded
    [ 5.379562] RPC: Registered named UNIX socket transport module.
    [ 5.379567] RPC: Registered udp transport module.
    [ 5.379569] RPC: Registered tcp transport module.
    [ 5.379570] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 5.585237] NFS: Registering the id_resolver key type
    [ 5.585264] Key type id_resolver registered
    [ 5.585266] Key type id_legacy registered
    [ 5.585278] FS-Cache: Netfs 'nfs' registered for caching
    [ 5.586108] systemd[1]: Received SIGCHLD from PID 124 (systemd-modules).
    [ 5.586146] systemd[1]: Got SIGCHLD for process 124 (systemd-modules)
    [ 5.586225] systemd[1]: Child 124 died (code=exited, status=0/SUCCESS)
    [ 5.586229] systemd[1]: Child 124 belongs to systemd-modules-load.service
    [ 5.586250] systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=0
    [ 5.586590] systemd[1]: systemd-modules-load.service changed start -> exited
    [ 5.586605] systemd[1]: Job systemd-modules-load.service/start finished, result=done
    [ 5.586717] systemd[1]: Starting of sys-kernel-config.mount requested but condition failed. Ignoring.
    [ 5.586722] systemd[1]: Job sys-kernel-config.mount/start finished, result=done
    [ 5.586742] systemd[1]: Starting of sys-fs-fuse-connections.mount requested but condition failed. Ignoring.
    [ 5.586746] systemd[1]: Job sys-fs-fuse-connections.mount/start finished, result=done
    [ 5.615412] systemd[1]: Accepted connection on private bus.
    [ 5.725920] systemd-journald[128]: Successfully opened /dev/kmsg for logging.
    [ 5.758577] systemd-journald[128]: Fixed max_use=75.1M max_size=9.3M min_size=64.0K keep_free=37.5M
    [ 5.758646] systemd-journald[128]: Reserving 17095 entries in hash table.
    [ 5.759414] systemd-journald[128]: Vacuuming...
    [ 5.759466] systemd-journald[128]: Flushing /dev/kmsg...
    [ 5.777632] systemd[1]: dev-hugepages.mount changed mounting -> mounting-done
    [ 5.777647] systemd[1]: Job dev-hugepages.mount/start finished, result=done
    [ 5.777687] systemd[1]: sys-kernel-debug.mount changed mounting -> mounting-done
    [ 5.777694] systemd[1]: Job sys-kernel-debug.mount/start finished, result=done
    [ 5.777716] systemd[1]: dev-mqueue.mount changed mounting -> mounting-done
    [ 5.777724] systemd[1]: Job dev-mqueue.mount/start finished, result=done
    [ 5.777819] systemd[1]: Received SIGCHLD from PID 125 (mount).
    [ 5.777855] systemd[1]: Got SIGCHLD for process 121 (mount)
    [ 5.777932] systemd[1]: Child 121 died (code=exited, status=0/SUCCESS)
    [ 5.777935] systemd[1]: Child 121 belongs to dev-mqueue.mount
    [ 5.777949] systemd[1]: dev-mqueue.mount mount process exited, code=exited status=0
    [ 5.777962] systemd[1]: dev-mqueue.mount changed mounting-done -> mounted
    [ 5.777998] systemd[1]: Got SIGCHLD for process 123 (mount)
    [ 5.778052] systemd[1]: Child 123 died (code=exited, status=0/SUCCESS)
    [ 5.778056] systemd[1]: Child 123 belongs to sys-kernel-debug.mount
    [ 5.778064] systemd[1]: sys-kernel-debug.mount mount process exited, code=exited status=0
    [ 5.778073] systemd[1]: sys-kernel-debug.mount changed mounting-done -> mounted
    [ 5.778104] systemd[1]: Got SIGCHLD for process 125 (mount)
    [ 5.778159] systemd[1]: Child 125 died (code=exited, status=0/SUCCESS)
    [ 5.778163] systemd[1]: Child 125 belongs to dev-hugepages.mount
    [ 5.778171] systemd[1]: dev-hugepages.mount mount process exited, code=exited status=0
    [ 5.778179] systemd[1]: dev-hugepages.mount changed mounting-done -> mounted
    [ 5.778270] systemd[1]: Accepted connection on private bus.
    [ 5.778429] systemd[1]: Accepted connection on private bus.
    [ 5.778509] systemd[1]: Accepted connection on private bus.
    [ 5.779032] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
    [ 5.779152] systemd[1]: systemd-udev-trigger.service: cgroup is empty
    [ 5.779481] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
    [ 5.779740] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
    [ 5.786928] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
    [ 5.790217] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
    [ 5.790280] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
    [ 5.790338] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
    [ 5.796880] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
    [ 5.807799] systemd-journald[128]: systemd-journald running as pid 128
    [ 5.808306] systemd[1]: Got notification message for unit systemd-journald.service
    [ 5.808312] systemd[1]: systemd-journald.service: Got message
    [ 5.808318] systemd[1]: systemd-journald.service: got STATUS=Processing requests...
    [ 6.246284] EXT4-fs (sda2): re-mounted. Opts: (null)
    [ 6.247294] systemd[1]: Received SIGCHLD from PID 118 (systemd-remount).
    [ 6.247328] systemd[1]: Got SIGCHLD for process 118 (systemd-remount)
    [ 6.247396] systemd[1]: Child 118 died (code=exited, status=0/SUCCESS)
    [ 6.247401] systemd[1]: Child 118 belongs to systemd-remount-fs.service
    [ 6.247419] systemd[1]: systemd-remount-fs.service: main process exited, code=exited, status=0
    [ 6.247721] systemd[1]: systemd-remount-fs.service changed start -> exited
    [ 6.247733] systemd[1]: Job systemd-remount-fs.service/start finished, result=done
    [ 6.247797] systemd[1]: local-fs-pre.target changed dead -> active
    [ 6.247805] systemd[1]: Job local-fs-pre.target/start finished, result=done
    [ 6.317889] systemd[1]: About to execute: /bin/mount tmpfs /tmp -t tmpfs -o nodev,nosuid
    [ 6.319475] systemd[1]: Forked /bin/mount as 140
    [ 6.319523] systemd[1]: tmp.mount changed dead -> mounting
    [ 6.319680] systemd[1]: About to execute: /usr/lib/systemd/systemd-random-seed load
    [ 6.323401] systemd[1]: Forked /usr/lib/systemd/systemd-random-seed as 141
    [ 6.323546] systemd[1]: systemd-random-seed-load.service changed dead -> start
    [ 6.347887] systemd[1]: tmp.mount changed mounting -> mounting-done
    [ 6.347901] systemd[1]: Job tmp.mount/start finished, result=done
    [ 6.348383] systemd[1]: Received SIGCHLD from PID 140 (mount).
    [ 6.348417] systemd[1]: Got SIGCHLD for process 140 (mount)
    [ 6.348489] systemd[1]: Child 140 died (code=exited, status=0/SUCCESS)
    [ 6.348493] systemd[1]: Child 140 belongs to tmp.mount
    [ 6.348504] systemd[1]: tmp.mount mount process exited, code=exited status=0
    [ 6.348515] systemd[1]: tmp.mount changed mounting-done -> mounted
    [ 6.349779] systemd[1]: Accepted connection on private bus.
    [ 6.350675] systemd[1]: Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1/agent
    [ 6.351301] systemd[1]: Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Local
    [ 6.433691] systemd[1]: dev-ttyS2.device changed dead -> plugged
    [ 6.433715] systemd[1]: sys-devices-platform-serial8250-tty-ttyS2.device changed dead -> plugged
    [ 6.434762] systemd[1]: dev-ttyS3.device changed dead -> plugged
    [ 6.434780] systemd[1]: sys-devices-platform-serial8250-tty-ttyS3.device changed dead -> plugged
    [ 6.439475] systemd[1]: Received SIGCHLD from PID 141 (systemd-random-).
    [ 6.439513] systemd[1]: Got SIGCHLD for process 141 (systemd-random-)
    [ 6.439

    Should I file a bug report? If so, with Arch or upstream?

  • [Solved] Shutdown/Reboot takes a long time

    I do an upgrade every 5 days or so but it's been a while since I last rebooted--probably around 15-24 days. Since I haven't shutdown/rebooted for a while, I decided to do one today. I noticed that shutdown/reboot takes a long time, around 2-3 minutes whereas before, it would be instant and the behavior seems weird. Upon pressing shutdown or reboot:
    1. Monitors become completely black and searches for a signal (by switching HDMI, DVI, etc). PC still on
    2. After 1 minute, if reboot, I can hear the GPU fans spin like crazy. Shutdown doesn't do this, just quiet.
    3. After waiting another minute, some output shows up really fast and the PC is rebooted or shutdown
    This didn't happen before so I think it's probable that one of the updates did this. Unfortunately, I'm not sure how to tell which one.
    I followed the section "Diagnosing Shutdown Problems" here on how to debug shutdown problems. I've got the systemd shutdown log but I can't tell where the problem is:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bea34fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bea35000-0x00000000bea7dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bea7e000-0x00000000bea85fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bea86000-0x00000000bf5f9fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fa000-0x00000000bf5fbfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bf5fc000-0x00000000bf60bfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf60c000-0x00000000bf615fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf616000-0x00000000bf63afff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bf63b000-0x00000000bf67dfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bf67e000-0x00000000bf7fffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f7fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: MSI MS-7673/P67A-G43 (MS-7673), BIOS V1.11 04/14/2011
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f800 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask E00000000 write-back
    [ 0.000000] 1 base 200000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 3 base 23F800000 mask FFF800000 uncachable
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
    [ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fce60-0x000fce6f] mapped at [ffff8800000fce60]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23f600000-0x23f7fffff]
    [ 0.000000] [mem 0x23f600000-0x23f7fffff] page 2M
    [ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x220000000-0x23f5fffff]
    [ 0.000000] [mem 0x220000000-0x23f5fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21fffffff]
    [ 0.000000] [mem 0x200000000-0x21fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbea34fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0xbe9fffff] page 2M
    [ 0.000000] [mem 0xbea00000-0xbea34fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] [mem 0xbf5fa000-0xbf5fbfff] page 4k
    [ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] [mem 0xbf67e000-0xbf7fffff] page 4k
    [ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 0x00000000BEA7E068 000054 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000BEA85148 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000BEA7E150 006FF4 (v02 ALASKA A M I 00000015 INTL 20051117)
    [ 0.000000] ACPI: FACS 0x00000000BF60DF80 000040
    [ 0.000000] ACPI: APIC 0x00000000BEA85240 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 0x00000000BEA852B8 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
    [ 0.000000] ACPI: MCFG 0x00000000BEA853C0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000BEA85400 000038 (v01 ALASKA A M I 01072009 AMI. 00000004)
    [ 0.000000] ACPI: ASF! 0x00000000BEA85438 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f7fffff]
    [ 0.000000] NODE_DATA(0) allocated [mem 0x23f7f5000-0x23f7f8fff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236e00000-ffff88023edfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xbea34fff]
    [ 0.000000] node 0: [mem 0xbf5fa000-0xbf5fbfff]
    [ 0.000000] node 0: [mem 0xbf67e000-0xbf7fffff]
    [ 0.000000] node 0: [mem 0x100000000-0x23f7fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23f7fffff]
    [ 0.000000] On node 0 totalpages: 2089813
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12143 pages used for memmap
    [ 0.000000] DMA32 zone: 777145 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20448 pages used for memmap
    [ 0.000000] Normal zone: 1308672 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea35000-0xbea7dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea7e000-0xbea85fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbea86000-0xbf5f9fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf5fc000-0xbf60bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf60c000-0xbf615fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf616000-0xbf63afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf63b000-0xbf67dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88023f400000 s86336 r8192 d32448 u524288
    [ 0.000000] pcpu-alloc: s86336 r8192 d32448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2057137
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0a8d7720-6c75-4f1e-b2e4-04d8196aa0fb rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 8146392K/8359252K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 212860K reserved, 0K cma-reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:456 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 3299.649 MHz processor
    [ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6601.26 BogoMIPS (lpj=10998830)
    [ 0.000022] pid_max: default: 32768 minimum: 301
    [ 0.000025] ACPI: Core revision 20141107
    [ 0.002006] ACPI: All ACPI Tables successfully acquired
    [ 0.229873] Security Framework initialized
    [ 0.229877] Yama: becoming mindful.
    [ 0.230159] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.231159] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.231602] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231607] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.231738] Initializing cgroup subsys memory
    [ 0.231741] Initializing cgroup subsys devices
    [ 0.231743] Initializing cgroup subsys freezer
    [ 0.231744] Initializing cgroup subsys net_cls
    [ 0.231745] Initializing cgroup subsys blkio
    [ 0.231759] CPU: Physical Processor ID: 0
    [ 0.231759] CPU: Processor Core ID: 0
    [ 0.231762] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.231764] mce: CPU supports 9 MCE banks
    [ 0.231772] CPU0: Thermal monitoring enabled (TM1)
    [ 0.231778] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [ 0.231839] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
    [ 0.232422] ftrace: allocating 21171 entries in 83 pages
    [ 0.238717] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.271684] smpboot: CPU0: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz (fam: 06, model: 2a, stepping: 07)
    [ 0.271688] TSC deadline timer enabled
    [ 0.271700] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
    [ 0.271711] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
    [ 0.271712] ... version: 3
    [ 0.271712] ... bit width: 48
    [ 0.271713] ... generic registers: 8
    [ 0.271714] ... value mask: 0000ffffffffffff
    [ 0.271714] ... max period: 0000ffffffffffff
    [ 0.271715] ... fixed-purpose events: 3
    [ 0.271715] ... event mask: 00000007000000ff
    [ 0.291699] x86: Booting SMP configuration:
    [ 0.291700] .... node #0, CPUs: #1
    [ 0.304842] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.305029] #2 #3
    [ 0.334799] x86: Booted up 1 node, 4 CPUs
    [ 0.334802] smpboot: Total of 4 processors activated (26407.07 BogoMIPS)
    [ 0.336656] devtmpfs: initialized
    [ 0.338107] PM: Registering ACPI NVS region [mem 0xbea35000-0xbea7dfff] (299008 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf60c000-0xbf615fff] (40960 bytes)
    [ 0.338111] PM: Registering ACPI NVS region [mem 0xbf63b000-0xbf67dfff] (274432 bytes)
    [ 0.338196] pinctrl core: initialized pinctrl subsystem
    [ 0.338227] RTC time: 18:49:17, date: 04/22/15
    [ 0.338286] NET: Registered protocol family 16
    [ 0.349856] cpuidle: using governor ladder
    [ 0.363177] cpuidle: using governor menu
    [ 0.363192] ACPI: bus type PCI registered
    [ 0.363193] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.363233] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.363234] PCI: not using MMCONFIG
    [ 0.363235] PCI: Using configuration type 1 for base access
    [ 0.376685] ACPI: Added _OSI(Module Device)
    [ 0.376686] ACPI: Added _OSI(Processor Device)
    [ 0.376687] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.376688] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.377668] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.378832] ACPI: Dynamic OEM Table Load:
    [ 0.378835] ACPI: SSDT 0xFFFF880235BFDE40 000084 (v01 AMI CST 00000001 MSFT 03000001)
    [ 0.379146] ACPI: Interpreter enabled
    [ 0.379150] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
    [ 0.379156] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.379157] ACPI: Using IOAPIC for interrupt routing
    [ 0.379168] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.379198] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.379380] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.379496] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.381659] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.381662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.381725] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
    [ 0.381755] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
    [ 0.381757] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
    [ 0.381758] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
    [ 0.381759] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
    [ 0.381932] PCI host bridge to bus 0000:00
    [ 0.381934] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.381935] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
    [ 0.381936] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
    [ 0.381937] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.381938] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.381939] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.381940] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
    [ 0.381945] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
    [ 0.381993] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    [ 0.382014] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.382032] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.382079] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [ 0.382098] pci 0000:00:16.0: reg 0x10: [mem 0xfe708000-0xfe70800f 64bit]
    [ 0.382164] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.382218] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
    [ 0.382235] pci 0000:00:1a.0: reg 0x10: [mem 0xfe707000-0xfe7073ff]
    [ 0.382315] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.382339] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.382365] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [ 0.382378] pci 0000:00:1b.0: reg 0x10: [mem 0xfe700000-0xfe703fff 64bit]
    [ 0.382443] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.382493] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [ 0.382628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.382664] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.382689] pci 0000:00:1c.4: [8086:244e] type 01 class 0x060401
    [ 0.382761] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.382787] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.382810] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
    [ 0.382882] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.382908] pci 0000:00:1c.5: System wakeup disabled by ACPI
    [ 0.382932] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
    [ 0.383004] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
    [ 0.383029] pci 0000:00:1c.6: System wakeup disabled by ACPI
    [ 0.383056] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [ 0.383074] pci 0000:00:1d.0: reg 0x10: [mem 0xfe706000-0xfe7063ff]
    [ 0.383154] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.383181] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.383206] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
    [ 0.383340] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
    [ 0.383355] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
    [ 0.383361] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
    [ 0.383366] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
    [ 0.383372] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
    [ 0.383378] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
    [ 0.383384] pci 0000:00:1f.2: reg 0x24: [mem 0xfe705000-0xfe7057ff]
    [ 0.383422] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.383461] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [ 0.383473] pci 0000:00:1f.3: reg 0x10: [mem 0xfe704000-0xfe7040ff 64bit]
    [ 0.383490] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
    [ 0.383561] pci 0000:01:00.0: [1002:6719] type 00 class 0x030000
    [ 0.383571] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.383579] pci 0000:01:00.0: reg 0x18: [mem 0xfe620000-0xfe63ffff 64bit]
    [ 0.383584] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
    [ 0.383593] pci 0000:01:00.0: reg 0x30: [mem 0xfe600000-0xfe61ffff pref]
    [ 0.383621] pci 0000:01:00.0: supports D1 D2
    [ 0.383650] pci 0000:01:00.1: [1002:aa80] type 00 class 0x040300
    [ 0.383660] pci 0000:01:00.1: reg 0x10: [mem 0xfe640000-0xfe643fff 64bit]
    [ 0.383708] pci 0000:01:00.1: supports D1 D2
    [ 0.389829] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.389830] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.389832] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.389833] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.389906] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.389985] pci 0000:03:00.0: [1b21:1080] type 01 class 0x060400
    [ 0.390139] pci 0000:03:00.0: supports D1 D2
    [ 0.390140] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.396493] pci 0000:00:1c.4: PCI bridge to [bus 03-04] (subtractive decode)
    [ 0.396501] pci 0000:00:1c.4: bridge window [io 0x0000-0x03af] (subtractive decode)
    [ 0.396502] pci 0000:00:1c.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
    [ 0.396503] pci 0000:00:1c.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
    [ 0.396504] pci 0000:00:1c.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.396505] pci 0000:00:1c.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.396506] pci 0000:00:1c.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.396507] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.396651] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.396745] pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
    [ 0.396772] pci 0000:05:00.0: reg 0x10: [mem 0xfe500000-0xfe501fff 64bit]
    [ 0.396910] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.403155] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.403160] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.403227] pci 0000:06:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.403248] pci 0000:06:00.0: reg 0x10: [io 0xd000-0xd0ff]
    [ 0.403279] pci 0000:06:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
    [ 0.403298] pci 0000:06:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
    [ 0.403403] pci 0000:06:00.0: supports D1 D2
    [ 0.403404] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.409816] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.409819] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.409826] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.410049] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.410074] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.410098] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.410122] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.410146] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410170] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
    [ 0.410194] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.410218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.410250] ACPI: Enabled 3 GPEs in block 00 to 3F
    [ 0.410300] vgaarb: setting as boot device: PCI:0000:01:00.0
    [ 0.410301] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.410302] vgaarb: loaded
    [ 0.410303] vgaarb: bridge control possible 0000:01:00.0
    [ 0.410339] PCI: Using ACPI for IRQ routing
    [ 0.415815] PCI: pci_cache_line_size set to 64 bytes
    [ 0.415855] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.415856] e820: reserve RAM buffer [mem 0xbea35000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf5fc000-0xbfffffff]
    [ 0.415857] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
    [ 0.415858] e820: reserve RAM buffer [mem 0x23f800000-0x23fffffff]
    [ 0.415918] NetLabel: Initializing
    [ 0.415919] NetLabel: domain hash size = 128
    [ 0.415919] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.415927] NetLabel: unlabeled traffic allowed by default
    [ 0.415940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.415942] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.417956] Switched to clocksource hpet
    [ 0.420722] pnp: PnP ACPI init
    [ 0.420798] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
    [ 0.420799] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.420800] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.420801] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.420802] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
    [ 0.420804] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.420902] system 00:01: [io 0x0a00-0x0a0f] has been reserved
    [ 0.420903] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.420993] pnp 00:02: [dma 0 disabled]
    [ 0.421016] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.421032] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.421058] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.421059] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421149] system 00:05: [io 0x0400-0x0453] could not be reserved
    [ 0.421150] system 00:05: [io 0x0458-0x047f] has been reserved
    [ 0.421151] system 00:05: [io 0x1180-0x119f] has been reserved
    [ 0.421152] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 0.421153] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.421154] system 00:05: [mem 0xfec00000-0xfecfffff] could not be reserved
    [ 0.421155] system 00:05: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.421157] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.421158] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.421187] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.421188] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.421295] pnp: PnP ACPI: found 7 devices
    [ 0.427004] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.427006] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.427007] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe6fffff]
    [ 0.427009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427011] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.427026] pci 0000:03:00.0: PCI bridge to [bus 04]
    [ 0.427044] pci 0000:00:1c.4: PCI bridge to [bus 03-04]
    [ 0.427053] pci 0000:00:1c.5: PCI bridge to [bus 05]
    [ 0.427056] pci 0000:00:1c.5: bridge window [mem 0xfe500000-0xfe5fffff]
    [ 0.427063] pci 0000:00:1c.6: PCI bridge to [bus 06]
    [ 0.427064] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
    [ 0.427070] pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427075] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
    [ 0.427076] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427077] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
    [ 0.427077] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
    [ 0.427078] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427079] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427080] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427081] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.427082] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
    [ 0.427083] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.427084] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
    [ 0.427085] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
    [ 0.427086] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
    [ 0.427087] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
    [ 0.427087] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
    [ 0.427088] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
    [ 0.427089] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
    [ 0.427090] pci_bus 0000:05: resource 1 [mem 0xfe500000-0xfe5fffff]
    [ 0.427091] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
    [ 0.427092] pci_bus 0000:06: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
    [ 0.427107] NET: Registered protocol family 2
    [ 0.427218] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.427305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.427411] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.427422] TCP: reno registered
    [ 0.427428] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427446] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.427479] NET: Registered protocol family 1
    [ 0.427627] pci 0000:01:00.0: Video device with shadowed ROM
    [ 0.427703] PCI: CLS 64 bytes, default 64
    [ 0.427731] Unpacking initramfs...
    [ 0.458276] Freeing initrd memory: 3368K (ffff88003795c000 - ffff880037ca6000)
    [ 0.458282] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.458284] software IO TLB [mem 0xbaa35000-0xbea35000] (64MB) mapped at [ffff8800baa35000-ffff8800bea34fff]
    [ 0.458388] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
    [ 0.458447] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458451] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458455] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458459] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x12
    [ 0.458489] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.458503] Scanning for low memory corruption every 60 seconds
    [ 0.458643] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.458653] Initialise system trusted keyring
    [ 0.458879] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.459596] zpool: loaded
    [ 0.459598] zbud: loaded
    [ 0.459684] VFS: Disk quotas dquot_6.5.2
    [ 0.459702] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.459788] Key type big_key registered
    [ 0.459886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.459910] io scheduler noop registered
    [ 0.459911] io scheduler deadline registered
    [ 0.459926] io scheduler cfq registered (default)
    [ 0.460230] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.460238] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.460245] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
    [ 0.460245] vesafb: scrolling: redraw
    [ 0.460246] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 0.460257] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
    [ 0.507010] Console: switching to colour frame buffer device 175x65
    [ 0.553487] fb0: VESA VGA frame buffer device
    [ 0.553501] intel_idle: MWAIT substates: 0x1120
    [ 0.553502] intel_idle: v0.4 model 0x2A
    [ 0.553502] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.553594] GHES: HEST is not enabled!
    [ 0.553630] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.574150] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.574369] Linux agpgart interface v0.103
    [ 0.574402] rtc_cmos 00:03: RTC can wake from S4
    [ 0.574506] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 0.574530] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 0.574537] Intel P-state driver initializing.
    [ 0.574635] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.575069] TCP: cubic registered
    [ 0.575206] NET: Registered protocol family 10
    [ 0.575527] NET: Registered protocol family 17
    [ 0.576245] Loading compiled-in X.509 certificates
    [ 0.576267] registered taskstats version 1
    [ 0.577040] Magic number: 11:338:848
    [ 0.577156] rtc_cmos 00:03: setting system clock to 2015-04-22 18:49:17 UTC (1429728557)
    [ 0.577255] PM: Hibernation image not present or could not be loaded.
    [ 0.577672] Freeing unused kernel memory: 1164K (ffffffff818e7000 - ffffffff81a0a000)
    [ 0.577674] Write protecting the kernel read-only data: 8192k
    [ 0.578177] Freeing unused kernel memory: 600K (ffff88000156a000 - ffff880001600000)
    [ 0.578369] Freeing unused kernel memory: 304K (ffff8800017b4000 - ffff880001800000)
    [ 0.586926] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.594161] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.594538] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.594602] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.596674] ACPI: bus type USB registered
    [ 0.596690] usbcore: registered new interface driver usbfs
    [ 0.596697] usbcore: registered new interface driver hub
    [ 0.596714] usbcore: registered new device driver usb
    [ 0.596929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.597010] ehci-pci: EHCI PCI platform driver
    [ 0.597090] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.597095] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.597107] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.598329] SCSI subsystem initialized
    [ 0.600997] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.601009] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe707000
    [ 0.601141] libata version 3.00 loaded.
    [ 0.607823] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.607929] hub 1-0:1.0: USB hub found
    [ 0.607934] hub 1-0:1.0: 2 ports detected
    [ 0.608004] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608009] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 2
    [ 0.608319] hub 2-0:1.0: USB hub found
    [ 0.608327] hub 2-0:1.0: 2 ports detected
    [ 0.608382] xhci_hcd 0000:05:00.0: xHCI Host Controller
    [ 0.608384] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
    [ 0.608386] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.608389] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
    [ 0.608405] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.611688] hub 3-0:1.0: USB hub found
    [ 0.611696] hub 3-0:1.0: 2 ports detected
    [ 0.612303] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.612313] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe706000
    [ 0.621118] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.621236] hub 4-0:1.0: USB hub found
    [ 0.621248] hub 4-0:1.0: 2 ports detected
    [ 0.621321] ahci 0000:00:1f.2: version 3.0
    [ 0.634481] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
    [ 0.634487] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
    [ 0.668448] scsi host0: ahci
    [ 0.668750] scsi host1: ahci
    [ 0.669100] scsi host2: ahci
    [ 0.669412] scsi host3: ahci
    [ 0.669697] scsi host4: ahci
    [ 0.669967] scsi host5: ahci
    [ 0.670051] ata1: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705100 irq 30
    [ 0.670054] ata2: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705180 irq 30
    [ 0.670057] ata3: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705200 irq 30
    [ 0.670059] ata4: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705280 irq 30
    [ 0.670061] ata5: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705300 irq 30
    [ 0.670064] ata6: SATA max UDMA/133 abar m2048@0xfe705000 port 0xfe705380 irq 30
    [ 0.914200] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.927545] usb 4-1: new high-speed USB device number 2 using ehci-pci
    [ 0.987472] ata5: SATA link down (SStatus 0 SControl 300)
    [ 0.987497] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987521] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 0.987543] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 0.987563] ata6: SATA link down (SStatus 0 SControl 300)
    [ 0.987584] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 0.987877] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.988115] ata3.00: ATAPI: TSSTcorp CDDVDW SH-S243D, SB00, max UDMA/100
    [ 0.988210] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988214] ata1.00: ATA-9: Samsung SSD 840 Series, DXT07B0Q, max UDMA/133
    [ 0.988217] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.988682] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
    [ 0.988746] ata1.00: configured for UDMA/133
    [ 0.988881] ata3.00: configured for UDMA/100
    [ 0.989027] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 7B0Q PQ: 0 ANSI: 5
    [ 0.989649] ata4.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
    [ 0.989653] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.990752] ata2.00: disabling queued TRIM support
    [ 0.990755] ata2.00: ATA-9: Crucial_CT240M500SSD1, MU05, max UDMA/133
    [ 0.990757] ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 0.992466] ata4.00: configured for UDMA/133
    [ 0.994299] ata2.00: supports DRM functions and may not be fully accessible
    [ 0.997177] ata2.00: disabling queued TRIM support
    [ 1.000401] ata2.00: configured for UDMA/133
    [ 1.000669] scsi 1:0:0:0: Direct-Access ATA Crucial_CT240M50 MU05 PQ: 0 ANSI: 5
    [ 1.001813] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S243D SB00 PQ: 0 ANSI: 5
    [ 1.011521] scsi 3:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 1D05 PQ: 0 ANSI: 5
    [ 1.015296] ata1.00: Enabling discard_zeroes_data
    [ 1.015310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
    [ 1.015364] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.015367] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.015385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015513] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
    [ 1.015517] sd 1:0:0:0: [sdb] 4096-byte physical blocks
    [ 1.015524] ata1.00: Enabling discard_zeroes_data
    [ 1.015532] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.015618] sd 3:0:0:0: [sdc] Write Protect is off
    [ 1.015621] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [ 1.015636] sd 1:0:0:0: [sdb] Write Protect is off
    [ 1.015641] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [ 1.015657] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015717] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.015779] sda: sda1 sda2
    [ 1.016099] ata1.00: Enabling discard_zeroes_data
    [ 1.016176] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.016225] sdb: sdb1
    [ 1.016696] sd 1:0:0:0: [sdb] Attached SCSI disk
    [ 1.022237] sdc: sdc1 sdc2
    [ 1.022726] sd 3:0:0:0: [sdc] Attached SCSI disk
    [ 1.025940] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.025945] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.026137] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 1.038098] hub 1-1:1.0: USB hub found
    [ 1.038285] hub 1-1:1.0: 6 ports detected
    [ 1.051455] hub 4-1:1.0: USB hub found
    [ 1.051648] hub 4-1:1.0: 8 ports detected
    [ 1.298000] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.303924] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
    [ 1.317239] usb 4-1.2: new full-speed USB device number 3 using ehci-pci
    [ 1.443336] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    [ 1.443537] systemd[1]: Detected architecture 'x86-64'.
    [ 1.443740] systemd[1]: Set hostname to <arch>.
    [ 1.460317] tsc: Refined TSC clocksource calibration: 3300.020 MHz
    [ 1.473794] usb 1-1.5: new high-speed USB device number 4 using ehci-pci
    [ 1.497743] systemd[1]: Unit type .busname is not supported on this system.
    [ 1.537625] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 1.537643] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 1.537662] systemd[1]: Reached target Remote File Systems.
    [ 1.537672] systemd[1]: Starting Remote File Systems.
    [ 1.537692] systemd[1]: Reached target Encrypted Volumes.
    [ 1.537701] systemd[1]: Starting Encrypted Volumes.
    [ 1.537748] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 1.537759] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 1.537800] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 1.537810] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 1.538002] systemd[1]: Created slice Root Slice.
    [ 1.538014] systemd[1]: Starting Root Slice.
    [ 1.538060] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 1.538070] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 1.538120] systemd[1]: Listening on Journal Socket.
    [ 1.538134] systemd[1]: Starting Journal Socket.
    [ 1.538265] systemd[1]: Created slice User and Session Slice.
    [ 1.538276] systemd[1]: Starting User and Session Slice.
    [ 1.545589] systemd[1]: Listening on Journal Audit Socket.
    [ 1.545747] systemd[1]: Created slice System Slice.
    [ 1.545765] systemd[1]: Starting System Slice.
    [ 1.546248] systemd[1]: Mounting Huge Pages File System...
    [ 1.546789] systemd[1]: Mounting Debug File System...
    [ 1.546970] systemd[1]: Created slice system-dhcpcd.slice.
    [ 1.546987] systemd[1]: Starting system-dhcpcd.slice.
    [ 1.547561] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 1.548678] systemd[1]: Starting Setup Virtual Console...
    [ 1.549285] systemd[1]: Started Set Up Additional Binary Formats.
    [ 1.550613] systemd[1]: Starting Load Kernel Modules...
    [ 1.550645] systemd[1]: Started File System Check on Root Device.
    [ 1.551159] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 1.551679] systemd[1]: Mounting POSIX Message Queue File System...
    [ 1.551836] systemd[1]: Created slice system-getty.slice.
    [ 1.551850] systemd[1]: Starting system-getty.slice.
    [ 1.551870] systemd[1]: Reached target Slices.
    [ 1.551883] systemd[1]: Starting Slices.
    [ 1.551931] systemd[1]: Listening on udev Kernel Socket.
    [ 1.551941] systemd[1]: Starting udev Kernel Socket.
    [ 1.551986] systemd[1]: Listening on Journal Socket (/dev/log).
    [ 1.551997] systemd[1]: Starting Journal Socket (/dev/log).
    [ 1.552492] systemd[1]: Starting Journal Service...
    [ 1.552545] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 1.552561] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 1.552600] systemd[1]: Listening on udev Control Socket.
    [ 1.552611] systemd[1]: Starting udev Control Socket.
    [ 1.552659] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 1.552669] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 1.552689] systemd[1]: Reached target Login Prompts.
    [ 1.552701] systemd[1]: Starting Login Prompts.
    [ 1.553185] systemd[1]: Starting udev Coldplug all Devices...
    [ 1.553231] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 1.553249] systemd[1]: Starting Delayed Shutdown Socket.
    [ 1.554439] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    [ 1.555736] systemd[1]: Mounting Temporary Directory...
    [ 1.556329] systemd[1]: Mounted POSIX Message Queue File System.
    [ 1.556363] systemd[1]: Mounted Huge Pages File System.
    [ 1.556388] systemd[1]: Mounted Debug File System.
    [ 1.556779] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [ 1.557030] systemd[1]: Started Setup Virtual Console.
    [ 1.557256] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 1.557431] systemd[1]: Mounted Temporary Directory.
    [ 1.558591] hub 1-1.5:1.0: USB hub found
    [ 1.558901] hub 1-1.5:1.0: 4 ports detected
    [ 1.560366] vboxdrv: Found 4 processor cores.
    [ 1.561065] vboxdrv: fAsync=0 offMin=0x2ca offMax=0x6c0c
    [ 1.561137] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    [ 1.561139] vboxdrv: Successfully loaded version 4.3.26_OSE (interface 0x001a000a).
    [ 1.561712] systemd[1]: Started Load Kernel Modules.
    [ 1.568012] systemd-journald[149]: Failed to set file attributes: Inappropriate ioctl for device
    [ 1.569830] systemd[1]: Started udev Coldplug all Devices.
    [ 1.575918] systemd[1]: Mounted FUSE Control File System.
    [ 1.576374] systemd[1]: Mounting Configuration File System...
    [ 1.576805] systemd[1]: Starting Apply Kernel Variables...
    [ 1.576856] systemd[1]: Started Rebuild Dynamic Linker Cache.
    [ 1.582712] systemd[1]: Started Rebuild Hardware Database.
    [ 1.582739] systemd[1]: Started First Boot Wizard.
    [ 1.582757] systemd[1]: Started Create System Users.
    [ 1.583212] systemd[1]: Starting Load/Save Random Seed...
    [ 1.583784] systemd[1]: Starting Create Static Device Nodes in /dev...
    [ 1.584599] systemd[1]: Mounted Configuration File System.
    [ 1.587256] systemd[1]: Started Load/Save Random Seed.
    [ 1.589801] systemd[1]: Started Apply Kernel Variables.
    [ 1.607967] systemd[1]: Started Create Static Device Nodes in /dev.
    [ 1.608452] systemd[1]: Starting udev Kernel Device Manager...
    [ 1.608476] systemd[1]: Reached target Local File Systems (Pre).
    [ 1.608492] systemd[1]: Starting Local File Systems (Pre).
    [ 1.626961] usb 1-1.6: new low-speed USB device number 5 using ehci-pci
    [ 1.637443] systemd[1]: Started udev Kernel Device Manager.
    [ 1.649393] systemd[1]: Started Journal Service.
    [ 1.653641] systemd-journald[149]: Received request to flush runtime journal from PID 1
    [ 1.813303] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
    [ 1.813310] ACPI: Power Button [PWRB]
    [ 1.813368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 1.813371] ACPI: Power Button [PWRF]
    [ 1.817850] wmi: Mapper loaded
    [ 1.855141] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 1.872038] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 1.872046] r8169 0000:06:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 1.877249] r8169 0000:06:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c7a000, 8c:89:a5:16:c4:7d, XID 0c900800 IRQ 32
    [ 1.877252] r8169 0000:06:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 1.880259] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
    [ 1.907839] [drm] Initialized drm 1.1.0 20060810
    [ 1.910066] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 1.911296] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.912890] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 1.913064] fuse init (API version 7.23)
    [ 1.914070] usblp 1-1.4:1.0: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x024A
    [ 1.914093] usbcore: registered new interface driver usblp
    [ 1.916048] AVX version of gcm_enc/dec engaged.
    [ 1.916050] AES CTR mode by8 optimization enabled
    [ 1.924639] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
    [ 1.925198] usbcore: registered new interface driver usbhid
    [ 1.925200] usbhid: USB HID core driver
    [ 1.926129] sound hdaudioC0D1: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
    [ 1.926132] sound hdaudioC0D1: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 1.926133] sound hdaudioC0D1: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 1.926134] sound hdaudioC0D1: mono: mono_out=0x0
    [ 1.926136] sound hdaudioC0D1: dig-out=0x11/0x1e
    [ 1.926137] sound hdaudioC0D1: inputs:
    [ 1.926139] sound hdaudioC0D1: Front Mic=0x19
    [ 1.926140] sound hdaudioC0D1: Rear Mic=0x18
    [ 1.926142] sound hdaudioC0D1: Line=0x1a
    [ 1.934672] iTCO_vendor_support: vendor-support=0
    [ 1.934826] [drm] radeon kernel modesetting enabled.
    [ 1.935110] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 1.935141] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
    [ 1.935229] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 1.939587] r8169 0000:06:00.0 enp6s0: renamed from eth0
    [ 1.939661] gpio_ich: GPIO from 436 to 511 on gpio_ich
    [ 1.941371] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2
    [ 1.941824] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
    [ 1.941825] AMD IOMMUv2 functionality not available on this system
    [ 1.943447] CRAT table not found
    [ 1.943449] Finished initializing topology ret=0
    [ 1.943479] kfd kfd: Initialized module
    [ 1.943669] checking generic (c0000000 5b0000) vs hw (c0000000 10000000)
    [ 1.943670] fb: switching to radeondrmfb from VESA VGA
    [ 1.943685] Console: switching to colour dummy device 80x25
    [ 1.943797] random: nonblocking pool is initialized
    [ 1.943880] [drm] initializing kernel modesetting (CAYMAN 0x1002:0x6719 0x1787:0x2307).
    [ 1.943890] [drm] register mmio base: 0xFE620000
    [ 1.943891] [drm] register mmio size: 131072
    [ 1.943923] ATOM BIOS: CAYMAN
    [ 1.943974] radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
    [ 1.943975] radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
    [ 1.943977] [drm] Detected VRAM RAM=2048M, BAR=256M
    [ 1.943977] [drm] RAM width 256bits DDR
    [ 1.944037] [TTM] Zone kernel: Available graphics memory: 4075924 kiB
    [ 1.944038] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 1.944039] [TTM] Initializing pool allocator
    [ 1.944043] [TTM] Initializing DMA pool allocator
    [ 1.944058] [drm] radeon: 2048M of VRAM memory ready
    [ 1.944059] [drm] radeon: 1024M of GTT memory ready.
    [ 1.944068] [drm] Loading CAYMAN Microcode
    [ 1.946470] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 1.946562] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 1.946609] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 1.946674] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 1.946720] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [ 1.946769] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
    [ 1.946769] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
    [ 1.946809] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
    [ 1.946849] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
    [ 1.951281] [drm] Internal thermal controller with fan control
    [ 1.955166] [drm] radeon: dpm initialized
    [ 1.955974] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 1.956619] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:04CA:005B.0004/input/input15
    [ 1.957600] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
    [ 1.957733] intel_rapl: Found RAPL domain package
    [ 1.957736] intel_rapl: Found RAPL domain core
    [ 1.978933] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
    [ 1.979020] radeon 0000:01:00.0: WB enabled
    [ 1.979022] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff880234d8bc00
    [ 1.979798] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90010f32118
    [ 1.979800] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff880234d8bc04
    [ 1.979801] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff880234d8bc08
    [ 1.979802] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff880234d8bc0c
    [ 1.979804] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff880234d8bc10
    [ 1.979805] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.979806] [drm] Driver supports precise vblank timestamp query.
    [ 1.979807] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
    [ 1.979844] radeon 0000:01:00.0: radeon: using MSI.
    [ 1.980067] [drm] radeon: irq initialized.
    [ 1.998991] [drm] ring test on 0 succeeded in 2 usecs
    [ 1.998999] [drm] ring test on 3 succeeded in 4 usecs
    [ 1.999006] [drm] ring test on 4 succeeded in 4 usecs
    [ 2.010399] hid-generic 0003:04CA:005B.0004: input,hidraw1: USB HID v1.10 Keyboard [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input0
    [ 2.012308] input: Lite-On Technology Corp. Goldtouch USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:04CA:005B.0005/input/input16
    [ 2.069928] input: Logitech M570 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.2/4-1.2:1.2/0003:046D:C52B.0003/0003:046D:1028.0006/input/input17
    [ 2.080530] Adding 4194300k swap on /mnt/LinuxStorage/swap. Priority:-1 extents:4 across:4464636k FS
    [ 2.116506] hid-generic 0003:04CA:005B.0005: input,hiddev0,hidraw2: USB HID v1.10 Device [Lite-On Technology Corp. Goldtouch USB Keyboard] on usb-0000:00:1a.0-1.6/input1
    [ 2.116542] logitech-hidpp-device 0003:046D:1028.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M570] on usb-0000:00:1d.0-1.2:1
    [ 2.118008] mousedev: PS/2 mouse device common for all mice
    [ 2.175912] [drm] ring test on 5 succeeded in 2 usecs
    [ 2.175917] [drm] UVD initialized successfully.
    [ 2.176481] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 2.176922] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 2.177365] [drm] ib test on ring 4 succeeded in 0 usecs
    [ 2.328709] [drm] ib test on ring 5 succeeded
    [ 2.329264] [drm] Radeon Display Connectors
    [ 2.329265] [drm] Connector 0:
    [ 2.329266] [drm] DP-1
    [ 2.329267] [drm] HPD5
    [ 2.329268] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 2.329268] [drm] Encoders:
    [ 2.329269] [drm] DFP1: INTERNAL_UNIPHY2
    [ 2.329269] [drm] Connector 1:
    [ 2.329270] [drm] DP-2
    [ 2.329270] [drm] HPD4
    [ 2.329271] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 2.329271] [drm] Encoders:
    [ 2.329272] [drm] DFP2: INTERNAL_UNIPHY2
    [ 2.329272] [drm] Connector 2:
    [ 2.329273] [drm] HDMI-A-1
    [ 2.329273] [drm] HPD6
    [ 2.329274] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 2.329274] [drm] Encoders:
    [ 2.329275] [drm] DFP3: INTERNAL_UNIPHY1
    [ 2.329275] [drm] Connector 3:
    [ 2.329276] [drm] DVI-D-1
    [ 2.329276] [drm] HPD1
    [ 2.329277] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
    [ 2.329277] [drm] Encoders:
    [ 2.329278] [drm] DFP4: INTERNAL_UNIPHY1
    [ 2.329278] [drm] Connector 4:
    [ 2.329279] [drm] DVI-I-1
    [ 2.329279] [drm] HPD3
    [ 2.329280] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
    [ 2.329280] [drm] Encoders:
    [ 2.329281] [drm] DFP5: INTERNAL_UNIPHY
    [ 2.329282] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 2.408814] [drm] fb mappable at 0xC0475000
    [ 2.408816] [drm] vram apper at 0xC0000000
    [ 2.408816] [drm] size 8294400
    [ 2.408817] [drm] fb depth is 24
    [ 2.408818] [drm] pitch is 7680
    [ 2.408899] fbcon: radeondrmfb (fb0) is primary device
    [ 2.435470] Console: switching to colour frame buffer device 240x67
    [ 2.438497] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 2.438498] radeon 0000:01:00.0: registered panic notifier
    [ 2.449565] [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
    [ 2.459456] Switched to clocksource tsc
    [ 2.490495] cfg80211: Calling CRDA to update world regulatory domain
    [ 2.687833] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687846] r8169 0000:06:00.0 enp6s0: link down
    [ 2.687870] IPv6: ADDRCONF(NETDEV_UP): enp6s0: link is not ready
    [ 20.764979] r8169 0000:06:00.0 enp6s0: link up
    [ 20.764992] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
    [ 256.173829] device-mapper: uevent: version 1.0.3
    [ 256.173991] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: [email protected]
    [ 256.713510] SGI XFS with ACLs, security attributes, realtime, no debug enabled
    [ 256.718933] JFS: nTxBlock = 8192, nTxLock = 65536
    [ 256.730155] ntfs: driver 2.1.31 [Flags: R/W MODULE].
    [ 256.800019] raid6: sse2x1 7801 MB/s
    [ 256.856622] raid6: sse2x2 11630 MB/s
    [ 256.913233] raid6: sse2x4 15648 MB/s
    [ 256.913234] raid6: using algorithm sse2x4 (15648 MB/s)
    [ 256.913235] raid6: using ssse3x2 recovery algorithm
    [ 256.913829] xor: automatically using best checksumming function:
    [ 256.946535] avx : 32756.400 MB/sec
    [ 256.954986] Btrfs loaded
    [ 603.210136] watchdog watchdog0: watchdog did not stop!
    [ 603.211033] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
    [ 603.244960] systemd-journald[149]: Received SIGTERM from PID 1 (systemd-shutdow).
    [ 603.321496] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
    [ 603.325328] systemd-shutdown[1]: Hardware watchdog 'iTCO_wdt', version 0
    [ 603.325462] systemd-shutdown[1]: Unmounting file systems.
    [ 603.393079] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402416] EXT4-fs (sdb1): re-mounted. Opts: (null)
    [ 603.402433] systemd-shutdown[1]: All filesystems unmounted.
    [ 603.402438] systemd-shutdown[1]: Deactivating swaps.
    [ 603.402507] systemd-shutdown[1]: All swaps deactivated.
    [ 603.402511] systemd-shutdown[1]: Detaching loop devices.
    [ 603.403097] systemd-shutdown[1]: All loop devices detached.
    [ 603.403101] systemd-shutdown[1]: Detaching DM devices.
    [ 603.403156] systemd-shutdown[1]: All DM devices detached.
    [ 603.412388] EXT4-fs (sdb1): re-mounted. Opts: data=ordered
    Would appreciate some input regarding this. Thanks!
    EDIT: This is on gnome 3.16. Not sure if that matters.
    Last edited by devrepublic (2015-05-13 03:24:19)

    ksu wrote:Thanks alot for the input guys. Since I want to start from scratch anyways I'll definitively dig deeper into the subject. BTRFS snapshot feature and RAID1 by simply mirroring two partitions sound awesome, and the subvolume feature seems to be exactly what I need for my USB setup, giving me alot of flexibility. But if there are really that many reports of random data loss then I'll also do some research into that direction to see what this is all about. I admit I'm a linux noob, but it's a lot of fun to learn all this stuff.
    Be sure to read this: https://btrfs.wiki.kernel.org/index.php/Gotchas
    From my own experience, I can say that:
    1. I've never had an issue nor data loss with BTRFS RAID1 root partition on a single disk (other than the first issue on the above list).
    2. I had recurring problems with BTRFS RAID1 non-root partition on a single disk not being able to mount (had to reboot random number of times to get it to mount). However, I suspect this was caused not just by BTRFS but the combination of BTRFS+LVM+dmcrypt which is a rather complex and unusual setup. I had somewhat similar issue with ZFS.
    3. I had BTRFS checkdisk report strange, non-critical, unfixable errors on my non-raid BTRFS root partition, but it never corrupted or lost any data. I simply copied the data to another partition, recreated the root partition and all was fine again.
    4. The last time I lost data on a single partition because of BTRFS was 17 months ago. The last time BTRFS snapshot saved me from losing data was yesterday.
    5. I migrated from BTRFS to ZFS for my backup server and will possibly do so for my work machines. ZFS is more elegant, mature and I have seen no complaints of losing data because of it. However, ZFS is complicated and somewhat restrictive to setup for a data partition, and many times more difficult to setup as root partition. I would not consider it for a non-permanent USB installation.
    6. What we committed here is a massive thread hijacking.
    Last edited by Lockheed (2015-04-24 05:27:51)

  • Mac OS X take a long time before shutting down...

    Hi everyone,
    I have a problem that I can't explain :
    My mac book pro take a long time before shutting down. I don't know why.
    When I click shut down, everything works normally.
    OS X quit my applications, the dock, the finder...
    But it's stay 10 minutes on my desktop background before the logout and finally the shutdown (what's the matter ? what does it do ?).
    I don't know what to do to find the problem...
    Maybe it's a process but I don't know how to localize it.
    What are the minimal processes in OS X (I'll try to find the problem by elimination) ?
    P.S. Sorry for my basic English... French native.
    Thank a lot for your help !

    Hello everyone !
    It's me d.bertrand (I had a problem with my account...) So I create a news account (sorry moderators) !
    I try to fix bugs with onyx but no results.
    Here my log files (I shutdown OS X at 11:48 and he really shut down at 12:04... 16 minutes !)
    With Onyx I look into the log file... And find that :
    SYSTEM LOG
    Jul 6 11:48:51 denis-bertrands-computer shutdown: reboot by Den:
    Jul 6 11:48:51 denis-bertrands-computer SystemStarter[500]: "/Library/StartupItems/Tablet" failed security check: permissions
    Jul 6 11:48:51 denis-bertrands-computer Parallels: Stopping DHCP/NAT daemon...
    Jul 6 11:48:51 denis-bertrands-computer SystemStarter[500]: authentication service (508) did not complete successfully
    Jul 6 11:48:52 denis-bertrands-computer Parallels: Unloading Network module...
    Jul 6 11:48:53 denis-bertrands-computer Parallels: Unloading ConnectUSB module...
    Jul 6 11:48:53 denis-bertrands-computer Parallels: Unloading Monitor module...
    Jul 6 11:48:54 denis-bertrands-computer kernel[0]: [Parallels] Parallels VM observer thread stopped
    Jul 6 11:48:54 denis-bertrands-computer Parallels: Unloading Hypervisor module...
    Jul 6 11:48:54 denis-bertrands-computer kernel[0]: [Parallels] Parallels Workstation Hypervisor exited.
    Jul 6 11:48:54 denis-bertrands-computer Parallels: Shutdown complete.
    Jul 6 12:04:08 denis-bertrands-computer SystemStarter[500]: The following StartupItems failed to properly start:
    Jul 6 12:04:08 denis-bertrands-computer SystemStarter[500]: /System/Library/StartupItems/AuthServer
    WINDOWSERVER LOG
    Jul 06 12:04:09 [84] CGXRestartSessionWorkspace: session workspace exited for session 256 ( on console )
    Jul 06 12:04:09 [84] loginwindow connection closed; closing server.
    Any idea ?
    Thanks !
    MBP 15" 2.33 / 2GoRAM Mac OS X (10.4.10)

  • My mac takes a long time to log on, running slow

    my imac is running slow & takes a long time logging on, anyone knows why this happens?

    If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
    Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select the CPU tab.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Step 2
    Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log — the text, please, not a screenshot.
    If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message.

  • Macbook Pro takes a long time (41 secs) from start to reach log-in - It used to be almost instantaneous, I'm running Lion OS

    My Macbook Pro takes a long time (41 secs) from start to reach log-in - It used to be almost instantaneous, I'm running Lion OS. I thought this might be because I'd used a lot of disk space but I've now reduced that - I'm only using 40 of the 320 gb available. I have no games and I've unchecked the "re-open windows" option on shutdown. The rest of the preformance (once in) remains good.

    41 seconds is actually a little faster then normal. Boot from completely off is normally around 45-50 seconds.
    Your computer never ever came on almost instantaneously from completely off. You are confusing waking up from sleep mode and booting the computer from completely off.

  • NW2004s takes a long time to start up

    I am trying to find out why out NW2004s takes a long time to start up.
    We have installed NW2004s SP8 JAVA only to use it as Enterprise Portal with Oracle 10g on SUN SPARC 64. While the shutdown of J2EE is pretty fast, the startup take over an hour and half.
    /usr/sap/<SID>/JC##/work/dev_server0 file shows:
    Thu Aug 10 15:31:48 2006
    4017.515: [GC 4017.515: [ParNew: 104368K->17613K(131328K), 0.0423530
    secs] 797893K->711138K(1004800K), 0.0428819 secs]
    Thu Aug 10 15:31:50 2006
    4019.309: [GC 4019.310: [ParNew: 105165K->17610K(131328K), 0.0762693
    secs] 798690K->711134K(1004800K), 0.0767036 secs]
    Thu Aug 10 15:34:35 2006
    4184.118: [GC 4184.119: [ParNew: 105162K->22685K(131328K), 0.0762199
    secs] 798686K->716210K(1004800K), 0.0766811 secs]
    and /usr/sap/<SID>/JC##/work/std_server0.out file show entries like:
    2051.407: [GC 2051.408: [ParNew: 112475K->25810K(131328K), 0.1614717
    secs] 678386K->591721K(1004800K), 0.1619460 secs]
    2060.554: [GC 2060.555: [ParNew: 113362K->26687K(131328K), 0.1458862
    secs] 679273K->592599K(1004800K), 0.1463431 secs]
    2068.742: [GC 2068.742: [ParNew: 114239K->27592K(131328K), 0.1464110
    secs] 680151K->593504K(1004800K), 0.1470097 secs]
    2077.575: [GC 2077.576: [ParNew: 115144K->28470K(131328K), 0.1545706
    secs] 681056K->594382K(1004800K), 0.1550365 secs]
    2086.411: [GC 2086.411: [ParNew: 116022K->29505K(131328K), 0.1559618
    secs] 681934K->595417K(1004800K), 0.1564804 secs]
    2094.803: [GC 2094.803: [ParNew: 117057K->30419K(131328K), 0.1531343
    secs] 682969K->596331K(1004800K), 0.1536090 secs]
    2103.255: [GC 2103.255: [ParNew: 117971K->31345K(131328K), 0.1602581
    secs] 683883K->597257K(1004800K), 0.1620506 secs]
    2112.423: [GC 2112.424: [ParNew: 118897K->32236K(131328K), 0.1715456
    secs] 684809K->598147K(1004800K), 0.1721748 secs]
    2123.276: [GC 2123.276: [ParNew: 119788K->33014K(131328K), 0.1640996
    secs] 685699K->598926K(1004800K), 0.1645846 secs]
    2132.172: [GC 2132.172: [ParNew: 120566K->33980K(131328K), 0.1673372
    secs] 686478K->599891K(1004800K), 0.1678214 secs]
    2141.072: [GC 2141.072: [ParNew: 121532K->34784K(131328K), 0.1810283
    secs] 687443K->600695K(1004800K), 0.1814991 secs]
    2149.693: [GC 2149.694: [ParNew: 122336K->35368K(131328K), 0.1670516
    secs] 688247K->601280K(1004800K), 0.1675269 secs]
    2158.486: [GC 2158.486: [ParNew: 122920K->36435K(131328K), 0.1756513
    secs] 688832K->602347K(1004800K), 0.1761320 secs]
    2167.314: [GC 2167.315: [ParNew: 123987K->37497K(131328K), 0.1852015
    secs] 689899K->603409K(1004800K), 0.1857250 secs]
    2176.397: [GC 2176.398: [ParNew: 125049K->38251K(131328K), 0.1741406
    secs] 690961K->604163K(1004800K), 0.1746117 secs]
    2185.352: [GC 2185.352: [ParNew: 125803K->39375K(131328K), 0.1920462
    secs] 691715K->605287K(1004800K), 0.1925810 secs]
    2194.150: [GC 2194.151: [ParNew: 126927K->40253K(131328K), 0.1923566
    secs] 692839K->606165K(1004800K), 0.1928781 secs]
    2202.884: [GC 2202.884: [ParNew: 127805K->38024K(131328K), 0.2031970
    secs] 693717K->607088K(1004800K), 0.2036677 secs]
    2211.384: [GC 2211.385: [ParNew: 125576K->38851K(131328K), 0.1844842
    secs] 694640K->607915K(1004800K), 0.1849062 secs]
    2219.963: [GC 2219.964: [ParNew: 126403K->39869K(131328K), 0.1842210
    secs] 695467K->608932K(1004800K), 0.1846878 secs]
    2228.866: [GC 2228.867: [ParNew: 127421K->39719K(131328K), 0.1920358
    secs] 696484K->609702K(1004800K), 0.1925630 secs]
    2238.453: [GC 2238.453: [ParNew: 127271K->40643K(131328K), 0.1889567
    secs] 697254K->610627K(1004800K), 0.1894261 secs]
    2247.056: [GC 2247.056: [ParNew: 128195K->40718K(131328K), 0.1947238
    secs] 698179K->611585K(1004800K), 0.1951833 secs]
    2255.409: [GC 2255.410: [ParNew: 128270K->40804K(131328K), 0.1939193
    secs] 699137K->612886K(1004800K), 0.1943765 secs]
    2264.305: [GC 2264.306: [ParNew: 128356K->39943K(131328K), 0.1884611
    secs] 700438K->613753K(1004800K), 0.1889279 secs]
    2273.187: [GC 2273.188: [ParNew: 127495K->39907K(131328K), 0.1996605
    secs] 701305K->614598K(1004800K), 0.2001354 secs]
    2281.869: [GC 2281.870: [ParNew: 127459K->39951K(131328K), 0.1870669
    secs] 702150K->615514K(1004800K), 0.1875029 secs]
    2290.306: [GC 2290.307: [ParNew: 127503K->39975K(131328K), 0.1803927
    secs] 703066K->616409K(1004800K), 0.1809368 secs]
    2300.101: [GC 2300.101: [ParNew: 127527K->39897K(131328K), 0.1830319
    secs] 703961K->617187K(1004800K), 0.1835056 secs]
    2310.130: [GC 2310.130: [ParNew: 127449K->39869K(131328K), 0.1858475
    secs] 704739K->618039K(1004800K), 0.1862819 secs]
    Does anyone know what these entries are and some possible options to speed up the startup process? Thanks. I have already gone through the notes for Virtual memory and  heap settings for SUN systems. Has anyone had any similar experience?
    Thanks!

    What SP are you on?  We had a similar issue w/SP6 but it was resoloved with SP7.
    Michael

  • Problem description: Computer takes a long time to fire up. Spinning ball is seen during start up, sometimes when login dialog box, and sometimes after entering login password. My mac freeze often, especially when using Lightroom-.

    Problem description:
    Computer takes a long time to fire up. Spinning ball is seen during start up, sometimes when login dialog box, and sometimes after entering login password. My mac freeze often, especially when using Lightroom….     Help is much appreciated!
    EtreCheck version: 2.0.11 (98)
    Report generated 3. november 2014 kl. 01.23.41 CET
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2010) (Verified)
      MacBook Pro - model: MacBookPro7,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1067 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1067 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      NVIDIA GeForce 320M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 2:49:19
    Disk Information: ℹ️
      Samsung SSD 840 EVO 500GB disk0 : (500,11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (260.35 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
    Configuration files: ℹ️
      /etc/sysctl.conf - Exists
      /etc/hosts - Count: 15
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/IPVanish.app
      [not loaded] foo.tap (1.0) Support
      [not loaded] foo.tun (1.0) Support
      /Applications/LaCie Desktop Manager.app
      [not loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) Support
      [not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
      [not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) Support
      [not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
      /Applications/Private Eye.app
      [loaded] com.radiosilenceapp.nke.PrivateEye (1 - SDK 10.7) Support
      /Library/Application Support/HASP/kexts
      [not loaded] com.aladdin.kext.aksfridge (1.0.2) Support
      /System/Library/Extensions
      [loaded] com.hzsystems.terminus.driver (4) Support
      [not loaded] com.nvidia.CUDA (1.1.0) Support
      [not loaded] com.roxio.BluRaySupport (1.1.6) Support
      [not loaded] com.sony.filesystem.prodisc_fs (2.3.0) Support
      [not loaded] com.sony.protocol.prodisc (2.3.0) Support
      /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
      [not loaded] com.roxio.TDIXController (2.0) Support
    Startup Items: ℹ️
      CUDA: Path: /System/Library/StartupItems/CUDA
      ProTec6b: Path: /Library/StartupItems/ProTec6b
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [running] com.adobe.AdobeCreativeCloud.plist Support
      [loaded] com.adobe.CS5ServiceManager.plist Support
      [running] com.digitalrebellion.EditmoteListener.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [loaded] com.intego.backupassistant.agent.plist Support
      [running] com.mcafee.menulet.plist Support
      [invalid?] com.mcafee.reporter.plist Support
      [loaded] com.nvidia.CUDASoftwareUpdate.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
      [running] com.orbicule.WitnessUserAgent.plist Support
      [loaded] com.xrite.device.softwareupdate.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.adobe.SwitchBoard.plist Support
      [running] com.aladdin.aksusbd.plist Support
      [failed] com.aladdin.hasplmd.plist Support
      [running] com.edb.launchd.postgresql-8.4.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.intego.BackupAssistant.daemon.plist Support
      [loaded] com.ipvanish.helper.openvpn.plist Support
      [loaded] com.ipvanish.helper.pppd.plist Support
      [invalid?] com.mcafee.ssm.ScanFactory.plist Support
      [invalid?] com.mcafee.ssm.ScanManager.plist Support
      [running] com.mcafee.virusscan.fmpd.plist Support
      [loaded] com.mvnordic.mvlicensehelper.offline.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [running] com.orbicule.witnessd.plist Support
      [loaded] com.radiosilenceapp.nke.PrivateEye.plist Support
      [running] com.xrite.device.xrdd.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.adobe.ARM.[...].plist Support
      [invalid?] com.digitalrebellion.SoftwareUpdateAutoCheck.plist Support
      [loaded] com.facebook.videochat.[redacted].plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [running] com.spotify.webhelper.plist Support
    User Login Items: ℹ️
      Skype Program (/Applications/Skype.app)
      GetBackupAgent Program (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
      PhoneViewHelper Program (/Users/[redacted]/Library/Application Support/PhoneView/PhoneViewHelper.app)
      EarthDesk Core UNKNOWN (missing value)
      Dropbox Program (/Applications/Dropbox.app)
      AdobeResourceSynchronizer ProgramHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      i1ProfilerTray Program (/Applications/i1Profiler/i1ProfilerTray.app)
    Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 6.0 Support
      Default Browser: Version: 600 - SDK 10.10
      AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0
      SiteAdvisor: Version: 2.0 - SDK 10.1 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      GarminGPSControl: Version: 3.0.1.0 Release - SDK 10.4 Support
      JavaAppletPlugin: Version: Java 7 Update 71 Check version
    User Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 6.2 Support
      F5 Inspection Host Plugin: Version: 6031.2010.0122.1 Support
      f5 sam inspection host plugin: Version: 7000.2010.0602.1 Support
    Safari Extensions: ℹ️
      Facebook Cleaner
      Better Facebook
      SiteAdvisor
      Incognito
      Bing Highlights
      YouTube5
      AdBlock
      YoutubeWide
    Audio Plug-ins: ℹ️
      DVCPROHDAudio: Version: 1.3.2
    3rd Party Preference Panes: ℹ️
      CUDA Preferences  Support
      EarthDesk  Support
      Editmote  Support
      Flash Player  Support
      FUSE for OS X (OSXFUSE)  Support
      Growl  Support
      Java  Support
      Witness  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          13% taskgated
          12% WindowServer
          1% WitnessUserAgent
          1% sysmond
          1% Activity Monitor
    Top Processes by Memory: ℹ️
      327 MB com.apple.WebKit.WebContent
      137 MB softwareupdated
      94 MB Safari
      82 MB VShieldScanner
      82 MB Dock
    Virtual Memory Information: ℹ️
      65 MB Free RAM
      1.58 GB Active RAM
      1.54 GB Inactive RAM
      647 MB Wired RAM
      2.95 GB Page-ins
      260 MB Page-outs

    You have SCADS of extensions and the things running. McAfee, Intego, Orbicule, CleanMyMac, and others I've not ever even heard of. My first recommendation would be to remove all of these and see if things improve.

  • Problem description: My  macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click-  EtreCheck

    My computer
    Problem description:
    My  macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
    EtreCheck version: 2.1.8 (121)
    Report generated 31 de março de 2015 18:29:15 BRT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        16 GB RAM Upgradeable
            BANK 0/DIMM0
                8 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                8 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 250
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 512 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320,07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [running]    com.trusteer.rapport.rapportd.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [running]    com.trusteer.rooks.rooksd.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        Stickies    Application  (/Applications/Stickies.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        npsf_cef: Version: sf 3.3.1.1 [Click for support]
        Google Earth Web Plug-in: Version: Unknown
    Safari Extensions: ℹ️
        DivX HiQ
        DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        MacFUSE  [Click for support]
        Perian  [Click for support]
        Trusteer Endpoint Protection  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
        Destinations:
            Time Machine Backups [Local]
            Total size: 999.86 GB
            Total number of backups: 60
            Oldest backup: 2012-07-15 01:16:54 +0000
            Last backup: 2015-03-29 19:28:06 +0000
            Size of backup disk: Excellent
                Backup size 999.86 GB > (Disk size 318.84 GB X 3)
    Top Processes by CPU: ℹ️
            97%    rapportd
             3%    WindowServer
             1%    mds
             0%    fseventsd
             0%    distnoted
    Top Processes by Memory: ℹ️
        155 MB    Safari
        120 MB    Finder
        86 MB    rapportd
        86 MB    WindowServer
        69 MB    mds_stores
    Virtual Memory Information: ℹ️
        12.56 GB    Free RAM
        2.53 GB    Active RAM
        428 MB    Inactive RAM
        1.66 GB    Wired RAM
        1.04 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 31, 2015, 06:00:15 PM    Self test - passed
        Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
        Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
        Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
        Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
        Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
        Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
        Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
        Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

    Open Activity Monitor and kill this process - rapportd.
    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • It takes a long time to open an app and sometimes it will just crash, any idea how to fix it?

    My four year old Macbook Pro couldn't start yesterday and after going through solutions and all, it worked. But now it's freaking laggy and whenever I want to open an app, it takes a long time or the app will just crash. Any idea how to fix it? I really need the speed and everything back.

    noeleeeen,
    so you have an external hard disk, onto which you deleted/moved files from your internal hard disk, so that you now have 143 GB or so free on your internal hard disk — is that correct? Is the external disk purely for backups (e.g. a Time Machine destination), or does it function as a supplement to your internal disk?
    Was it entirely your personal data files (documents, photos, movies, music, &c.) which you’d deleted or moved to the external disk, or did you also delete/move apps, libraries, &c. over there?
    I’m not familiar with Echofon Lite, so I can’t comment on it, but an Apple-supplied app like the App Store shouldn’t crash.
    Have you tried running Disk Utility yet, to see if its verification process gives your disks its seal of approval?

  • Firefox takes a long time to close since a recent update and hogs memory.

    Since one of the recent updates that started using plugin containers, Firefox takes a long time to close. If I try to go back it, it tells me it is still running. I liik in Task Manager and about seven plug-in container. exe's are running and I have turned off or disabled mostplugins and addons, even Quicktime. Firefox uses an obscene amount of RAM on my XP machine and has made it sluggish. I use XP SP3. This started after you added the plugin containers in one of the recent updates earlier in the year. For the features it offers me or doesn't offer me, rather, it uses way too much RAM and is too sluggish. And takes a very long time to close out when I close the browser. It uses about twice as much RAM as it used to.

    Use "Firefox/File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") to close Firefox if you are currently doing that by clicking the close X on the title bar.
    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    See "Firefox hangs when you quit it":
    *https://support.mozilla.org/kb/Firefox+hangs
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/Troubleshooting+plugins

  • Macbook takes a long time to recognize power soure

    Hello,
    I have a MacBook running 10.6.8 that is exhibiting some strange behavior in regards to the power source.  When I plug the power cord in it takes a while, sometimes as long as 3 minutes to recognize that it the computer is no longer running on battery anymore.  Similarly it takes a long time to realize it's no longer running via a power cord when I remove the power cord from the machine.  In all cases it eventually catches up and makes the proper switch, but I'm a bit concerned as this behavior is relatively new.  I've tried swapping out power cords and it doesn't make any difference.  I only have one user on the machine but could create a test account and try to see if this behavior is account specific if someone things that is worthwhile.  Another thing to note, I believe the battery level indicator is correct, because often when it catches up after I've inserted the power cord the percent full jumps a couple of digits, as if it'd been charging for a while.  Does anyone have any thoughts or ideas that I could try to remedy this?  So far, I've really only tried repairing disk permissions as I've never seen an issue like this before.  Thanks.
    -NifflerX

    How long is "forever"?
    Create a new user account. Log out of the original and into the new one, then put the machine to sleep. Any changes?
    ~Lyssa

  • Firefox takes a long time to load, even with add-ons and auto-update disabled

    When opening firefox it takes a long time (1 minute +) to load. The computer does not display any indication that firefox is loading (often leading to 2, 3 or 4 instances of Firefox trying to start due to my impatience).
    My OS is Windows Vista 32 bit
    Firefox is v4.0.1

    Can you check your Windows Firewall settings? It's possible that it's routing Firefox requests differently. At least one other Firefox user has reported that his Windows Firewall was set to block Firefox 3.6.

  • Import of Apex Application to another instance takes a long time

    Hi,
    I have developed an apex application which is of size -24 MB .While importing the appl to another instance it takes a long time (few hours). The imported appl is working fine so far.
    What should be the ideal time for the import of this size appl ?
    Is it the usual due to the size of the app or some thing is wrong with the app ?
    Any one can please throw some light on this, as I am unable to figure out if it the appl issue or the DB issue.
    Thanks in advance!

    The application is getting imported and running, so you do not really have a problem in hand.
    24M is big, but not all that big to run for hours.
    The time taken depends on the resources available on the server where you are trying to import. If the load on that server is high then the resources will be shared between all the processes run on it, and the import process will run longer.
    Monitor disk and CPU usage, it will provide you some clues. Try importing at offpeak time and it should run faster if there is a server resource issue.
    Regards,

  • My iPad air 2 takes a LONG time time to charge

    So I recently got a IPad Air 2 and I have used the 10w charger which it came with but it takes a LONG time to charge. In around 1 hour is only goes up around 10% and the charger gets quite hot. Also sometimes it displayed the message,"Not charging," up in the corner where the battery symbol is. Now I got the 12w wall plug charger and it's abit faster and the charger gets hot but not as hot as the other one just warm. I haven't had the message,"Not charging," yet.
    Has anyone had the same issue or can help because I don't think It is a battery issue as the iPad air 2 is brand new and I only got it 2 days ago.

    Mine is a new IPAD Air and I have about 50 apps - the device has been trying to download/sync my apps overnight and it is nowhere near done......I have been trying to do it through Itunes leaving it with the IMAC (syncing computer) overnight but it is nowhere near done......
    The IMAC uses a wireless connection for Itunes, etc.....
    As of now the IPAD Air is showing that it is downloading but I wonde whether I should shut it down and restart?
    The downloads have been going on for about 12 hours.....

Maybe you are looking for

  • Error 906 message not found on compiling form in forms builder

    When compiling a form in forms builder 6i I get the message: error 906: message not found. No message file for product=plsql80 facility=PCM What should I do?

  • RMAN Script & RMAN Configuration

    Dear All, This is the first time i am using RMAN. i just wanted to execute the following RMAN script for a testing purpose, for this what are the RMAN configuration i must have to do before executing this script below: RMAN> run { shutdown immediate;

  • K330 Recovery system - how does it work?

    Hi, I'm about to buy K330 with i5 processor, but before I do, I'd like to know something about Lenovo Recovery System. So did I got this right: When you work on computer, and want to save everything you've done, you press one button on top of the com

  • ActiveSync with Certificate-Based Authentication

    We are trying to setup ActiveSync with certificate-based authentication against Exchange 2010 SP2, but with no luck. What has been done so far: OWA over https works fine. A public, trusted certificate is in place. Setup ActiveSync against this Exchan

  • Dynamic Web Templates

    I have been using DW for about 8 months now. I have created several sites and typically create a template first and then attach pages as needed. In the past the links update themselves correctly. I have the templates in a separate directory, so links