Shuts down as soon as unplugged but battery charged 100%... please help

My MacBook will now shut down as soon as the power cable is unplugged. I've done all of the Software Updates so should be right up to date.
Mystery is it did start to shut down when it was in sleep mode and running on battery but now won't work at all when it is unplugged.
Everytime I start up it comes up with a firmware update icon, screen but says it cannot find the firmware to update.
Please help. The whole point of a MacBook is that it is supposed to be portable and I'm frustrated.
MacBook 13inch 2.0Ghz Intel 2GB Ram   Mac OS X (10.4.10)   Purchased March 2007

You might try to reset the SMC and/or PRAM.
You might also look here for help with MacBook battery problems.
If you have done this and it did not help contact Apple. Your battery is under warranty and they should be able to help you out.
Mort

Similar Messages

  • Qosmio X775-q7387 shutting down by itself! I need a permanent fix, please help!

    After hours of searching through the internet, this is the conclusion I came to as to why my x775 occasionally shuts down. It ran PERFECTLY up until this and i've had it about 2 years.
    According to others, there is a power membrane defect with this laptop that refuses to be acknowledged by Toshiba which is heart breaking because I saved up a long time to afford this 1200 dollar machine. Loved everything about it until this....
    The power button is so sensitive according to other users, that any presense, like even air will cause the button to think it's being pushed down so it shuts down as a response.
    I did try this step. Take battery out and wires. Hold power button for 30 seconds. Then put battery back and wires and start up as normal. This hasn't given me a problem yet, but granted I only did this late last night.
    I would hate to have Toshiba viewed in a bad light over this problem or to get rid of this machine.
    But i highly doubt the above "fix" is permanent.
    Is it a permanent fix? What does draining the battery even have to do with the power button issue?
    Replacing the power membrane would seem to be useless if it's a defect with all models of this laptop.
    I just can't believe it ran so perfectly until this. I bragged to everyone about this computer.
    Now, i'm sitting here freaking out wonder how I can permanently fix this.
    Please dont let me and other Qosmio users suffer Toshiba. Help us!

    Can I do this "fix" myself, or at least buy the part somewhere so that someone else who is good with computers can do it for me?
    This is the solution other people with this problem had. 
    Computer repair sent one user this message "Tested without touch panel, hdd, ram, keyboard light. Ordered new motherboard, however discovered that the computer started fine without touchpanel, seems like on/off switch is oversensitive.
    Power membrane switch is replaced, and everything is checked and OK."
    So- power membrane was to blame, and I guess this is just the "underneath" section of the panel of the external power, volume buttons at the top of my key board right?
    "Yes my issue was resolved. They replaced the power button strip above the keyboard which has eliminated the random shutdowns. Funny thing is that they had it less than 24 hours and seems like the "failure analysis engineer" immediately knew what the problem was. I feel sorry for the uneducated who fork over money for unneeded repairs."
    So, since Toshiba seems to try to make you pay 400 dollars to replace a motherboard etc. which won't fix the true problem, is there a site where I can buy the power membrane for my laptop, then take the computer and a part to a repair shop and they will do it?

  • My computer shuts down when I plug in my iPhone 5. Please help!

    I have a new iPhone 5, and when I plug it into my PC, it syncs for a few minutes and then my computer abruptly shuts down. This is my 3rd iPhone model (previously 3G, 4, and now 5), and I've never had this problem before. I reinstalled windows 7 home premium, and reinstalled itunes, but this problem persists
    Any ideas?

    Also, I do not have a webcam on this computer, so it can't be an old camera driver... (as was the case for others with this same issue...)

  • Having trouble with Yahoo email.  Will read a few emails and then the infamous spinning colored wheel appears and takes forever.  Have to shut down and go through the whole cycle again.  Please help.

    Sorry first post in this forum.   I can log on to Yahoo email, read a few emails and then the infamous multi-colored spinning wheel appears and I end up having to shut down and cycle back in again.  I have a 2011 MacBookPro 17 not quite a year and it just started acting up this way.  Any suggestions.  Thanx.

    here are some ways to troubleshoot the spinning beach ball: http://www.macworld.com/article/151583/2010/05/spinningbeachballofdeath.html  Hope you find this useful.

  • I  am not able to shut down my Mac Mail on my MacBook Pro! Please help

    I am not able to Quit my MacMail on my MacBook Pro!
    The email pogram is not sending emails; they remain in my outbox
    I cant Quit Mail to shut down my Mac
    What should i do?

    Select  ▹ Force Quit... from the menu bar, then select Mail and press return. If it happens again, post.

  • ITunes shuts down as soon as aTV begins syncing... HELP!

    i never had this problem before. the only changes i've made since the last time i synced is a learned a remotes commands to control the atv (not itouch or iphone) in order to take advantage of the extra commands.
    i've tried reseting atv to no avail, i've also restarted my pc. itunes opens and works fine so long as atv is unplugged and therefore no syncing is taking place.
    any help is greatly appreciated.

    I have the same issue:
    Background: Quad core PC with 4MB SDRAM
    Vista 64
    iTunes 8.0.2.20
    aTV 2.3
    iTunes works well until it attempts to sync with the aTV, at which points I get a message stating "iTunes has stopped working". It is not linked to the network, as I get the same issue when I link the aTV to the PC with a direct ethernet cable. I use Norton 360 and the firewall is on "Allow" for iTunes. I use the original white remote, set up for aTV.

  • My friend's iphone got drained. The last time she used it, the battery was so low and suddenly it shut downed, now she can't open it anymore. Please help!!

    Please please i need your help

    Using the Supplied Charger and Cable, connect to the Mains Power for at least 30 Minutes.
    If the Device do not Restart... Disconnect from the Power and...
    Perform a Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • HT201210 After i installed somethin on cydia (ACiD Siri iOS 6) It says Error then shut down then it is Stucked on Apple Logo! PLEASE HELP! whn im doing an Restore it says '3194' A little help?

    Sorry for my English please Understand =))

    This is user to user support site hosted by Apple, who don't want you to jailbreak your device, and don't like jailbreaking to be discussed here. You may get more help on sites that discuss Cydia, or you could try unjailbreaking the device.
    tt2

  • I unplugged my iphone 3gs ios 5.1.1 and started playing..i played for about 2 hours,BUT the battery didnt change!!!...after about 4 hours,the phone suddenly shuts down...i recalebrated the battery (by hard reset)..but didnt help...so HELPPP PLZZZ!!!!!!!

    i unplugged my iphone 3gs ios 5.1.1 and started playing..i played for about 2 hours,BUT the battery didnt change!!!...after about 4 hours,the phone suddenly shuts down...i recalebrated the battery (by hard reset)..but didnt help...so HELPPP PLZZZ!!!!!!!..+ when i charge my iphone, i dont see the lightning bolt,instead, i see a plug icon...i know this means th@ battery is full, but my battery is no where near full!!!!!

    Just a quick update with a couple more details before I go to work:
    I left my phone plugged into the wall charger all night long but the Apple logo is still blinking on and off. However, when unplugged from the charger, the screen goes blank and the unit does not respond to pressing/holding the buttons at all. Likewise, flipping the mute switch does not cause the phone to vibrate as it normally would, which made me wonder if power was being disrupted somewhere else in the unit before the battery. I just finished disassembling the unit down to the battery, looked for any loose connections etc., and did spot a suspicious looking spot on top of the #5 ribbon connector that I had not taken notice of before in my first disassembly. I'll take a picture of it and post a link for your consideration later on today when I have a spare moment, although I fear the worst.

  • I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with 68%.

    I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with like 68% left.

    Morning Clementine Lin,
    For more information this, please see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
    Have a nice day,
    Mario

  • I was updating my iphone 5 to ios 7 but i cancelled it by forcing a shut down as there was not much battery left so now its in restore mode and i cant restore my phone now it says error 3194 and ive tried the sudo code but it still doent work help?

    i was updating my iphone 5 to ios 7 but i cancelled it by forcing a shut down as there was not much battery left so now its in restore mode and i cant restore my phone now it says error 3194 and ive tried the sudo code but it still doent work help?

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these steps for assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow the advanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • My laptop shuts down immediately when i unplug the charger

    Okay so I got my macbook air laptop about six months ago, so it's relatively new. About a month ago the harddrive inside failed and i took it to the aple store and they replaced the harddrive free of charge since i was still under the year warranty. I lost all my data since i didn't back it up but it worked normally after that. Now, about a month later, I'm having this charging problem. My computer charges very very slowly when its plugged in (i think it charged about 7 percent over like 15 hours), and the second i unplug the charger, the computer shuts down. I tried looking around the internet for solutions and some people with the same problem say they have like a red or black x where the battery is, but nothing looks out of the ordinary on mine except for the fact that it charges so slowly. In all the time that I've had and used it it's only gone fully dead and shut off by itself a few times (what i mean is that, i almost never let it go completely uncharged, when it was low on battery i charged it instead of letting it die). Also, when i unplug the charger, right before my laptop shuts down, i can see that the battery percentage without the cord plugged in is 0 percent even though that makes no sense because when the charger is in it says 85 percent. The only thing i can think of that I've been doing differently on my computer recently is that two days ago i couldn't find the wall piece for my iphone charger so i charged it via the usb port in my computer a few times. I didn't think this would affect my computer though? This could be totally unrelated, but it's the only thing i can think of that's different than usual. Also, the computer works totally fine when the charger is plugged in. I've had this problem for a few days now and i think it's getting worse. When it first started, the computer would only shut down a few minutes after i unplugged the charger, but now it shuts down within seconds of the charger coming out. I'm very hesitant to open the computer up because I'm not the best with computers and I'm afraid I might mess something up inside. If it really is a problem with the battery and it has to be replaced, I guess that's okay because I'm still under warranty, but I'd prefer if i could fix this on my own. Thankyou so much for your help and all answers are appreciated

    Simple, You have a hardware problem that only Apple can fix. So you need to take it back in to an Apple store and have it fixed by Apple. If it is still within it's one year warranty period it will be free.
    If you khaven't bought the Apple care Extended Warranty, Applecare, then I suggest you do that before the standard one year warranty runs out. You can't buy it after that one year warranty runs out and to fix any Mac out of warranty is Very Expensive.

  • IPhone 3GS Shuts Down When I Get To 20% Battery - Battery Doesn't Last

    So like everyone now, I'm experiencing battery issues on the 3GS after upgrading to 4.3. My phone can barely get through a 5 hour day at school & it's dead before I even get to work at night. I'm constantly having to keep my phone plugged in to the external battery I bought. My 3GS also automatically shuts down as soon as my phone reaches 20% battery. This never happened before iOS 4.3. Used to be the phone shut off at 2% battery, not 20%. Anybody else experiencing this? I hope this gets fixed in an upcoming update soon.

    I have exactly the same issue with iPhone 4 iOS 4.3.3 getting empty battery shutdowns at 20% then at more than 20 % seems to be poor calibration but I don't know how to reach 0% if it keeps shutting at 20% anyways charging to 100% then restoring appears to solve the problem but it's only a matter of time then the problem comes back ... Any ideas

  • IMac shuts down as if someone unplugged it

    I'm not sure what the "shutting down" problem is for others, but for the 2nd time in 3 days, my iMac has turned off as if someone unplugged it.
    I use a surge protector so I don't think that's the problem, especially because I've used the same surge protector for several months without issue.
    My guess is that because I haven't dusted the air vents (are they located along the crease in the back and towards the top?) at all, my iMac is overheating and thus turning off. I have a widget that tells me the temperature of various components of my iMac. I'm not sure as to the accuracy of the widget, but does anyone know what threshold of temperatures are unsafe? Maybe that could answer whether or not my iMac is overheating and thus causing the sudden shut offs.
    Thanks!

    When an iMac overheats, it can cause the computer to shut down.
    Disconnect all devices from your computer except for the keyboard & mouse when troubleshooting.
    See Knowledge Base Article http://docs.info.apple.com/article.html?artnum=86817 iMac G5: Loose power cord could cause power loss
    Boot from your Hardware Test DVD. See what turns up if anything.
    Consider updating to OS 10.4.10 & all the other available updates for your model iMac through the Software Update control panel if you make it to your desktop w/o shutting down.
    See if your model iMac qualifies for one of the G5 iMac Repair Programs
    **WARNING: DUE TO SECURITY REASONS, PLEASE DO NOT POST YOUR COMPUTER'S SERIAL NUMBER ON THESE MESSAGE BOARDS.**
    Which "model" & "generation" G5 iMac do you have?
    Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
    You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
    Thank you

  • Hi i recieved an ipod touch gen 5 for christmas and it worked perfectly on the 30th it decided to instantly shut down on me and over heat iv tried all of apples recommeded techniques but it wont work at all even when charging someone please help me!

    Hi i recieved an ipod touch gen 5 for christmas and it worked perfectly on the 30th it decided to instantly shut down on me and over heat iv tried all of apples recommeded techniques but it wont work at all even when charging someone please help me!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • How to get lab view to display my plot in DB

    hi guys i desigED n an operational amplifier to determine the gain product band width using a 741 chip and the gain of the circuit is 1000, meaning that the gain bandwidth PRODUCT  will occur at a frequency of 100hz. but i have a problem, when i star

  • Data recovery question / challenge...

    Please email me if you have any advice: [email protected] / challenge:Is there a tool by hyperion or anyone else, that will recover data from a valid index file & page file? As an administrator you can only export cubes through the server process, wh

  • How do you get the sound to play on the tv from your macbook

    I connected my macbook to my tv using a HDMI cord. I'm trying to watch netflix but the sound plays from my macbook. How do you get the music to play from the tv instead.

  • Dynamic parameter selection

    Hello All, Is there any way to choose selection parameters dynamically (not a whole structure as with FM FREE_SELECTIONS_DIALOG), I'd want to represent the input parameters of a Function Module without either to know the FM at design time nor regener

  • Migrate DB2 on an IBM OS390 VM/CMS mainframe to Oracle on NT

    The migration workbench documentation indicates that DB2 on an AS/400 can be converted to Oracle on NT. Has anyone attempted to convert DB2 on an IBM OS390 to Oracle on NT? Also, the workbench documentation indicates that stored procedures are not co