Shuts Down Immediately After Waking From Sleep
I have a first gen MBP 2.16 GHz Core Duo. Within the past two weeks whenever I wake my computer from full sleep, either by opening the lid or with a keyboard the system shuts down after briefly showing my previous state before sleeping. I have run the full Hardware Test and it has come up negative. I've reset PRAM and SMC and the problem persists. I'm afraid that the logic board is failing even though I had it replace just over a year ago when my AppleCare was about to run out.
"I'm afraid that the logic board is failing even though I had it replace just over a year ago when my AppleCare was about to run out."
Long shot..........
Call Customer Relations (US) 1-800-767-2775. Outside the US, call Apple tech support & ask politely yet firmly to be transferred over to Customer Relations. Explain about your previous logic board replacement & your current problem(s). CR will be able to look up your record(s) if you do not have your old case number available. See what they can do for you.
Good luck!
!http://i50.tinypic.com/izvwo1.gif!
Similar Messages
-
After upgrading to Tiger, freeze after waking from sleep on PM G4
My experience with Tiger in the past week as not been great. The reason I upgraded was to get iSync 2.1, so that my Moto E815 phone could be sync'd with my OSX AddresBook and iCal. This wasn't possible with the latest version of Panther.
So, I upgraded to Tiger 10.4.3, and now my G4 freezes immediately after waking from sleep. After pressing the 'return' key to wake the computer, the G4 sends a signal to wake the monitor, but on top of the screen saver is a black text box which states there was a problem I must press (and hold) the power button to restart the Mac. It's written in four languages.
When I installed Tiger, I used the 'archive' option.
My computer is a bit of a FrankenMac: Originally a G4/350 with AGP, upgraded with a Sonnet 1GHz G4 processor card, 1.12GB RAM, a 160GB HDD, an nVidia GeForce3 64MB AGP video card, Samsung DVD/CR-RW drive (Patchburn3) and a Belkin PCI card with 2 additional Firewire ports and 3 additional USB 2.0 ports. When I performed the upgrade, I had the keyboard and mouse plugged into the case USB 1.1 ports, a Logitech Notebook Pro USB camera plugged into the other case USB 1.1 port, and a D-Link BT120 USB->BT adapter plugged into one of the three USB 2.0 ports on the Belkin PCI card.
When I check the Console logs after the rebooting, I see a kernal panic in the panic.log. Apple has received this a number of times from me in the past week as I keep sending them 'talkback' logs after the fact.
I also see an error in the system.log which may reveal what is going on:
Nov 20 18:54:40 localhost kernel[0]: standard
timeslicing quantum is 10000 us
Nov 20 18:54:40 localhost mDNSResponder-107.3 (Aug 22
2005 11: 46:54)[44]: starting
Nov 20 18:54:40 localhost kernel[0]:
vmpagebootstrap: 284852 free pages
Nov 20 18:54:40 localhost kernel[0]:
migtable_maxdispl = 70
Nov 20 18:54:40 localhost kernel[0]: 71 prelinked
modules
Nov 20 18:54:40 localhost kernel[0]: Copyright (c)
1982, 1986, 1989, 1991, 1993
Nov 20 18:54:40 localhost kernel[0]: The Regents of
the University of California. All rights reserved.
Nov 20 18:54:40 localhost kernel[0]: using 2949 buffer
headers and 2949 cluster IO buffer headers
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270 Bus
9 already taken
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270
AppleUSBOHCI[0x2057000]::start OHCI controller will be
unloaded across sleep
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
TI ID 8019 built-in now active, GUID 000a27ff
feb38fe6; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
VendorID 1033 ID cd PCI now active, GUID 0000303c
0008c32e; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: Security auditing
service present
Nov 20 18:54:40 localhost kernel[0]: BSM auditing
present
Nov 20 18:54:40 localhost kernel[0]: disabled
Nov 20 18:54:40 localhost kernel[0]: rooting via
boot-uuid from /chosen:
474ACE52-2523-3EE7-9C54-DDC3734C7922
Nov 20 18:54:40 localhost kernel[0]: Waiting on <dict
ID="0"><key>IOProviderClass</key><string
ID="1">IOResources</string><key>IOResourceMatch</key><string
ID="2">boot-uuid-media</string></dict>
Nov 20 18:54:40 localhost kernel[0]: Got boot device =
IOService:/Core99PE/pci@f2000000/AppleMacRiscPCI/pci-bridge@D/IOPCI2PCIBridge/ma c-io@7/AppleKeyLargo/ata-4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDevice/IOBlockStorageDriver/HDS722516VLAT80
Media/IOApplePartitionScheme/AppleHFS_Untitled2@10
Nov 20 18:54:40 localhost kernel[0]: BSD root:
disk0s10, major 14, minor 10
Nov 20 18:54:40 localhost kernel[0]: jnl:
replay_journal: from: 2668032 to: 12288 (joffset
0xe04000)
Nov 20 18:54:40 localhost kernel[0]: Jettisoning
kernel linker.
Nov 20 18:54:40 localhost kernel[0]: Resetting
IOCatalogue.
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 2
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: NVDANV20HAL
loaded and registered.
Nov 20 18:54:40 localhost kernel[0]: CHUDProf.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: CHUDUtils.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: IPv6 packet
filtering initialized, default to accept, logging
disabled
Nov 20 18:54:41 localhost kernel[0]: UniNEnet:
Ethernet address 00:0a:27:b3:8f:e6
Nov 20 18:54:41 localhost launchd: Server 292f in
bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited
abnormally: Hangup
Nov 20 18:54:41 localhost lookupd[56]: lookupd
(version 365) starting - Sun Nov 20 18:54:41 2005
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk0s10 hfs
474ACE52-2523-3EE7-9C54-DDC3734C7922 Onyx
Nov 20 18:54:41 localhost kernel[0]: jnl:
replay_journal: from: 1374208 to: 1564160 (joffset
0x624000)
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk1s10 hfs
947C0EA5-F775-330F-82D9-D2F8B65F7357 Backup
/Volumes/Backup
Nov 20 18:54:43 localhost kernel[0]: NVDA,NVMac: vram
[98000000:08000000]
Nov 20 18:54:43 localhost
/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow:
Login Window Application Started
Nov 20 18:54:43 localhost loginwindow[72]: Login
Window Started Security Agent
Nov 20 18:54:44 localhost mDNSResponder: Adding browse
domain local.
Nov 20 18:54:45 localhost kernel[0]:
UniNEnet::monitorLinkStatus - Link is up at 100 Mbps -
Full Duplex
Nov 20 18:54:45 Jason-Radtkes-Computer configd[34]:
setting hostname to "Jason-Radtkes-Computer.local"
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
executing
/System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-netw ork
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
posting notification
com.apple.system.config.network_change
Nov 20 18:54:47 Jason-Radtkes-Computer lookupd[82]:
lookupd (version 365) starting - Sun Nov 20 18:54:47
2005
Nov 20 18:54:49 Jason-Radtkes-Computer configd[34]:
target=enable-network: disabled
I suspect the problem where the USB devices are started, because I had that Bluetooth adapter plugged in at the time of the upgrade. I'm speaking of the lines in the log which start with 'USBF'. The keyboard and mouse are useless when the black screen shows up after waking from sleep.
I've tried some of the suggestions I've found for the iBook 'wake from sleep' postings on macfixit.com and here - resetting NVRAM and removing a few of the .plist files. This didn't seem to help.
I would greatly appreciate help in resolving this issue. I've been a Mac owner since the original Macintosh (it's still in my house) and am frustrated that this is the first problem I've encountered.
Thanks in advance for your help.Thanks. In fact I had bought a new keyboard and mouse (Macally) and sure enough, if I unplug it before it reboots, the CD drive door stays closed and I can boot from a CD! I did not try any of the other stuff. Is there any way to get it to stop this? Why does a USB peripheral cause the CD to eject anyway? Would love to know!
Ron -
Kernal panics after waking from sleep on MBP
I have a client machine that continues to crash after waking from sleep. Most of the logs indicate its a USB driver issue but not all of them which make me question whether it is truly a USB issue.
Here is the first log:
Interval Since Last Panic Report: 42291 sec
Panics Since Last Report: 1
Anonymous UUID: 4D739B74-806B-4EE5-B643-3ABC69B99DB3
Mon Jan 21 14:40:59 2013
panic(cpu 0 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816c6e1f, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff806a45a628, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0xffffff806a5541f8, RBX: 0xffffff806a554000, RCX: 0x0000000000826f90, RDX: 0x0000000000000000
RSP: 0xffffff807e493bc0, RBP: 0xffffff807e493ca0, RSI: 0x000000807e878986, RDI: 0xffffff807e493c39
R8: 0x000000000000001f, R9: 0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff800a69e600
R12: 0xffffff806a458000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0xffffff807e493bc0
RFL: 0x0000000000010286, RIP: 0xffffff7f816c6e1f, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0xffffff806a45a628, Error code: 0x0000000000000000, Faulting CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff807e493870 : 0xffffff8000220792
0xffffff807e4938f0 : 0xffffff80002c4794
0xffffff807e493aa0 : 0xffffff80002da55d
0xffffff807e493ac0 : 0xffffff7f816c6e1f
0xffffff807e493ca0 : 0xffffff7f816e3c05
0xffffff807e493ce0 : 0xffffff7f816c5257
0xffffff807e493d10 : 0xffffff7f80c9a832
0xffffff807e493d50 : 0xffffff7f8174d4f0
0xffffff807e493da0 : 0xffffff7f8174f692
0xffffff807e493de0 : 0xffffff7f8174f7c4
0xffffff807e493e20 : 0xffffff7f80c9e4c5
0xffffff807e493e60 : 0xffffff7f80c9e628
0xffffff807e493e90 : 0xffffff7f80ca1fd7
0xffffff807e493ef0 : 0xffffff800063d4d6
0xffffff807e493f30 : 0xffffff800063c250
0xffffff807e493f70 : 0xffffff800063c0f4
0xffffff807e493fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 42049368948948
last loaded kext at 16300805887472: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f80795000, size 16384)
last unloaded kext at 16406017984235: com.apple.driver.AppleUSBCDC 4.1.22 (addr 0xffffff7f80795000, size 12288)
loaded kexts:
com.lightspeedsystems.kext.LsSaKernel64 2.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AGPM 100.12.75
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AudioAUUC 1.59
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleIntelHD4000Graphics 7.3.2
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.3.2
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.1.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBXHCI 1.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 6
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 9
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 4
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x14100000 / 4
Second log---------------------------------------------------------------------------- -----------------------------------
Interval Since Last Panic Report: 18613 sec
Panics Since Last Report: 1
Anonymous UUID: 4D739B74-806B-4EE5-B643-3ABC69B99DB3
Wed Jan 30 13:21:54 2013
panic(cpu 2 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f816d61f1, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x000000012562c000, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
RAX: 0x480001eabd058d48, RBX: 0xffffff806a6af000, RCX: 0x0000000000000000, RDX: 0x0000000000000000
RSP: 0xffffff807ef03b60, RBP: 0xffffff807ef03b70, RSI: 0x000000000000012c, RDI: 0xffffff806a6af000
R8: 0x000000000000001f, R9: 0xffffffffffffff00, R10: 0xffffffffffffffdf, R11: 0xffffff80002dad00
R12: 0xffffff806a6af000, R13: 0x0000000000000000, R14: 0xffffff806a6af000, R15: 0xffffff807ef03bc0
RFL: 0x0000000000010282, RIP: 0xffffff7f816d61f1, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x000000012562c000, Error code: 0x0000000000000000, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff807ef03810 : 0xffffff8000220792
0xffffff807ef03890 : 0xffffff80002c4794
0xffffff807ef03a40 : 0xffffff80002da55d
0xffffff807ef03a60 : 0xffffff7f816d61f1
0xffffff807ef03b70 : 0xffffff7f816d7413
0xffffff807ef03bb0 : 0xffffff7f816c6e31
0xffffff807ef03ca0 : 0xffffff7f816e3c05
0xffffff807ef03ce0 : 0xffffff7f816c5257
0xffffff807ef03d10 : 0xffffff7f80c9a832
0xffffff807ef03d50 : 0xffffff7f8174d4f0
0xffffff807ef03da0 : 0xffffff7f8174f692
0xffffff807ef03de0 : 0xffffff7f8174f7c4
0xffffff807ef03e20 : 0xffffff7f80c9e4c5
0xffffff807ef03e60 : 0xffffff7f80c9e628
0xffffff807ef03e90 : 0xffffff7f80ca1fd7
0xffffff807ef03ef0 : 0xffffff800063d4d6
0xffffff807ef03f30 : 0xffffff800063c250
0xffffff807ef03f70 : 0xffffff800063c0f4
0xffffff807ef03fb0 : 0xffffff8000820057
Kernel Extensions in backtrace:
com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000->0xffffff7f80cc7fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
com.apple.driver.AppleIntelFramebufferCapri(7.3.2)[5D02E509-F60D-3312-9C3C-AF47 D6622C85]@0xffffff7f81742000->0xffffff7f8179ffff
dependency: com.apple.iokit.IOACPIFamily(1.4)[19BAB11C-CE5E-3068-AD10-132019C59D6C]@0xfffff f7f807d4000
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
com.apple.driver.AppleIntelHD4000Graphics(7.3.2)[AD64F3E5-2838-3046-A9EA-1CB6C9 769436]@0xffffff7f816c2000->0xffffff7f81728fff
dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f80cc8000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80c8f000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 18633492210750
last loaded kext at 37211407179: com.lightspeedsystems.kext.LsSaKernel64 2.0.0 (addr 0xffffff7f810cc000, size 147456)
last unloaded kext at 198602469343: com.apple.driver.AppleUSBTCKeyEventDriver 227.6 (addr 0xffffff7f814fc000, size 8192)
loaded kexts:
com.lightspeedsystems.kext.LsSaKernel64 2.0.0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AGPM 100.12.75
com.apple.driver.X86PlatformShim 5.0.0d8
com.apple.driver.AppleHDA 2.2.5a5
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMikeyDriver 2.2.5a5
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleIntelHD4000Graphics 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.AppleIntelFramebufferCapri 7.3.2
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCISerialATAPI 2.0.3
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AirPort.Brcm4331 561.7.22
com.apple.driver.AppleSDXC 1.2.2
com.apple.driver.AppleUSBHub 5.1.0
com.apple.iokit.AppleBCM5701Ethernet 3.2.4b8
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleUSBXHCI 1.1.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.X86PlatformPlugin 5.1.1d6
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.driver.AppleThunderboltDPInAdapter 1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.driver.AppleThunderboltNHI 1.6.0
com.apple.iokit.IOThunderboltFamily 2.0.3
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IOEthernetAVBController 1.0.1b1
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.8
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
System Profile:
Model: MacBookPro9,2, BootROM MBP91.00D3.B08, 2 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 2.2f38
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 384 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3230554638424455302D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.198.19.22)
Bluetooth: Version 4.0.8f17, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: APPLE HDD HTS547550A9E384, 500.11 GB
Serial ATA Device: HL-DT-ST DVDRW GS31N
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0252, 0x1d183000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821d, 0x1d181300 / 7
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8509, 0x1a110000 / 3
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc52f, 0x14200000 / 1
Sorry for the huge post. The lightspeed kext shouldn't be causing problem as we use this program for all mac machines, I also did extensive troubleshooting with it. I did ask her to stop using the logitech USB device but she said it didn't make a difference, it was a plug and play device, would it still cause this issue without having it plugged in?
Thanks in advance for the help.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether your problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Anyone's MacPro have problems after waking from sleep mode?
After waking from sleep, my MacPro 2x2.4 Quadcore Intel Xeon freezes in several applications that had been running before sleeping. Mail and Firefox both get into endless loops trying to download data and will not force quit. Pulldown restart and shut down do not function when this is occurring. Must shuyt down manually from box and start again. Everything works fine again until it goes to sleep again.
Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
A. run Disk Warrior
B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks -
Multiple BSOD after waking from sleep.
Edit: Issue traced to a bad stick of ram. Thanks you for your time!
Recently installed Windows 8.1. No problems. Put computer to sleep a few times instead of shutting down. No problems. Today, after waking from sleep, it opens to the sign in page instead of desktop like normal. Start up an application, two seconds
later, BSOD. Restart, don't touch anything, within two minutes, BSOD. And so on. Struggle to download latest windows updates, BSOD. Updates start installing after a BSOD. Restarts at least five times while installing, which I found to be
strange. Dumps and msinfo through link. Since the updates went through, no problem (for the last ten minutes while I put this together). I thought I should share though.
http://1drv.ms/O1SDXd
Hardware:
Gigabyte LGA 1150 Intel Z87 HDMI SATA 6Gbps USB 3.0 ATX DDR3 1600 Intel Motherboards GA-Z87-HD3
Intel Core i5-4670K
CORSAIR Vengeance 16GB (2 x 8GB) 240-Pin DDR3 SDRACorsair Builder Series CX 600 Watt ATX/EPS 80 PLUS (CX600)
SAPPHIRE Vapor-X Radeon HD 4870 1GB 256-Bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card
Samsung Electronics 840 EVO-Series 120GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE120BWThese crashes were related to memory corruption (probably caused by a driver).
Please run this test to find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Driver verifier (for complete directions see our wiki here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag -
System clock fails to update after waking from sleep
I've noticed that my new PowerMac G5 Dual-Core 2GHz (running Mac OS X 10.4.3) doesn't update its system clock to the current time after waking from sleep.
When I put it to sleep and then wake it some time later, the Clock in the upper right-hand corner doesn't update to the current time. It still ticks on (second for second) but remains out of sync.
Opening the Date & Time preferences pane will restore the time to the correct setting.
This problem only occurs with sleep and then wake-from-sleep. It doesn't happen when I shut down the machine and then restart it.
Does anybody know if I've got a malfunctioning machine? It's only 1 day old...
Or better still, how do I solve this problem?
PowerMac G5 Dual-Core 2GHz Mac OS X (10.4.3)No, my Mac is not having trouble contacting the time server. I checked the console log and found no messages related to this.
I am on a broadband always-on connection (recently switched from DSL to cable modem, and the problem occurred under both connections). However, my original post states that the computer loses time only when it is asleep, and I didn't think that my computer could contact the time server when it is asleep. It also loses time when it is off, which I neglected to mention previously. Am I mistaken in thinking that the computer communicates over the network only when it is awake? Since it keeps accurate time when awake (once I've reset it by opening the Date & Time control panel), it seems to me like it IS communicating with the time server without issue.
[And I apologize for misinterpreting your question as a suggestion. I was trying to be polite by thanking you for taking an interest in my issue. I'll watch my semantics more carefully next time.]
Cheers,
Katy
G5/dual core 2.3 Ghz Mac OS X (10.4.4) 2.5G RAM -
Unable to get keyboard or mouse focus back after waking from sleep
Here's a problem with very specific symptoms, which I've seen on a number of Macs that I support:
- After waking from sleep, the Macs are unable to fully achieve focus on any window. All windows, in all apps, appear to be in the background -- their frames have the lighter gray look of backgrounded windows.
- I can grab any window and move it around, and even interact with elements of the window by clicking on them. I cannot, however, ever really bring the window to the front.
- I can't type anywhere.
- Regardless of what window I click on, the OS menu bar remains "stuck" on whatever app was in the foreground when the Mac went to sleep. Sadly, though, none of the menus can be selected or pulled down.
The only way out of this state is to force a restart.
I am wondering if anyone else has seen this behavior, or, better yet, has actually solved it.
Thanks in advance!Check the Display & Enhance Contrast settings - System Preferences/Universal Access
Or repair permissions and restart your computer.
Or *Disconnect all peripherals from your computer.* Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select *Disk Utility.*
Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
Click _*Repair Disk.*_
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer. -
My iMac won't automatically connect to wifi after waking from sleep mode
After dowloading the newest software update and performing a firmware update for my Airport router, my Imac won't connect to Wifi automatically after waking from sleep mode
Please re-download and install the 10.7.3 update. You can locate it at 10.7.3 (Client Combo). Follow the on-screen instructions. Then test it out, if you still have the same problem please restart, when you hear the startup tone hold down the Option Key and then choose the Recovery Partition. Then open Disk Utilities and Repair Disk Permissions 2x. Then exit DU, restart normally and re-test.
-
My calendar just shuts down immediately after opening.
Hello, My calendar just shuts down immediately after opening. I reset the ipad and it still isn't working Any ideas? iPad 2
I only kow how to disengae yahoo but maybe the process will help for other email accounts linked to ipad calendar. Just remeber to go to email accounts and shut down any associations with other programs.
Here is what I did in yahoo.mail
Went to My Yahoo
selected quicklinks (on top left of page)
Calendar was not shown , so I selected more yahoo services at bottom of list.
Candar was among many and I selected it.
You then see your calendar with a margin on left that probably shows a checked box of te name of you calendar. Uncheck it.
Also check the subscriptions. You must decide what makes sense for you there.
To be more sure, delete any recent calendar entries in your yahoo calendar or ipad calendar that might have cuased the problem. that's what happened to me. I noticed the problem right after I accepted a ics invitation from some else. I think the ics invitation that I accepteed from my email was the real culprit but who knows. All I know is that all these things combined solved my problem.
Close the My Yahoo
Remeber to check your ipad for any associations and eliminate them and point the ipad calendar to icloud.
Reboot you ipad
Check for results
I hope this helps -
Keyboard volume keys don't work after waking from sleep
This problem has existed for many months on my 2009 Mac Pro. I'm running 10.6.3. The problem is reproducible 100% of the time. I use external speakers. Sound output is set to "Line Out."
1. Boot machine. External speakers work fine. Volume keys on keyboard (F11, F12) work correctly.
2. Put machine to sleep.
3. After waking from sleep, F11 and F12 no longer control the volume of the external speakers. The "pop" noise when hitting F11 and F12 is emitted from the internal speaker. The mute key (F10) does work for the external speakers, however.
4. The keyboard volume controls become responsive again by switching the sound output from Line Out to another output option and then back to Line Out.
This bug is a huge hassle. Does anyone have a solution?I have several mid-2009 8-core Mac Pro's, all running Snow Leopard, and all have been having this problem as well.
I will not guarantee this is going to work for anyone else....but we have found a (slightly inelegant) workaround for it that has been working for several weeks now without fail.
Prior to putting your MacPro to sleep, run the volume all the way up and leave it there. Afterwards, put it to sleep as usual. We use the keyboard to do this, but I would imagine any method should have the same affect. However, I've not experimented.
Anyway...this has worked 100% of the time for us. The only downside of it is that you have to remember to run it up before....and then back down after waking (else that first alert sound or music file you play will really wake YOU up!)
If this works for anyone else, let me know.
Apple should never have let this one out the door with this bug. Especially, as Apple Support is....wanting, at best.
...sT -
Password not required immediately after wake from sleep
Every once in a while when my retina macbook pro wakes from sleep I do no need to enter my password immediately. Instead it just starts with no password required and then 5-10 seconds later it takes me to the lock screen and asks for my password. Other times it will ask for my password, start up after its entered and then 5-10 seconds later it takes me back to the lock screen and asks for my password again. Usually when it "takes me back to the login screen" it actually just makes the screen black until I press a key or move the mouse and then it "wakes up" again and shows the login screen.
Also is it common for it to hang for a while before allowing me to type my password after waking from sleep? Frequently it will take 10+ seconds before I can start typing in the password field or the clock updates etc. Its a 2.3ghz core i7 with 16GB of ram.
I have installed all updates and it should be noted that I do have the "require password immediately after sleep or screen saver begins" option enabled in system preferences.Hi Kevin,
You mention that you moved the TC's network up in priority, so you may have already done these things as well. Apologies in advance if that is the case.
If you normally use your MBP with wireless, make sure that the AirPort connection is that top of the connections list in System Preferences > Network. Click on small gear icon at the bottom of list to put the Airport connection first in line to connect so the MBP will not look for an ethernet connection first.
Click on the Airport connection to highlight it and then click Advanced. If you have other wireless networks that you can delete, use the - (minus) button to do so. Ideally, you'll only have a few networks displayed. Confirm that your wireless network name is first at the top of this network list.
Make sure there is a check mark next to Remember Networks Joined. Leave the next two check boxes blank.
Any help? My MBP connects consistently and quickly with these settings when the cover is opened. -
Hi
My Macbook Pro 15 inch takes several minutes to be able to connect to the internet after waking from sleep. Does anyone else have this problem and is there a fix?
Alancoxorangepippin wrote:
The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
What that means is that is can't be used with Lion 10.7. PowerPC was the chip Apple used up until 2006 when they switched to Intel. At that point, they created the Rosetta emulator to allow for PPC support for 5 years. They finally dropped the support with the release of Lion. It will only work with OS X 10.6 or earlier. The other option is to purchase a new GPS, which can be had for $100 for a decent one. -
External Hard Drive Fail After Waking from Sleep
Hi,
I've been having this issue for over a year (since upgrading to Lion, and now still persists after upgrading to Mountain Lion), and I haven't been able to find the exact answer I need after searching through the posts here, and on the internet.
I have a 2011 MBP, and after upgrading to Lion last year, I've noticed that my WD external hard drive for the Mac has issues to be recognized after the laptop wakes from sleep. The drive icons are still there on the desktop, and all the files are listed. However, I cannot open any of the files, and Time Machine backup automatically fails.I am able to eject the drives by dragging the icons into the trash can. However, nothing happens if I simply unplug the fire wire 800 cable and re-plug it into the computer after ejecting the drives. I need to reset the external drive by unplugging both the fire wire cable and the power supply, and replug everything.
Aside from being a hampering process after waking from sleep, this is also very stressful on the drive itself, so I would like to fix this. Does anyone know the issue behind this or have a solution? Thanks in advance!Thanks for this, and apologies for delay in replying...in between seeing your post I backed up the ext hdd to another mac and used the disc utility to erase and repair and then re mounted the ext hdd. OK. I have then tested the ext hdd being recognised when waking from sleep mode a few times and everything appears to be fine. If this doesn't work (long term) I will follow the instructions as you have suggested....
I now have a new problem with my HP printer (Photosmart Plus) which is not being recognised by a new wireless router..Ok whilst the router is switch on and I have reconfigured the printer..but when the router is switched off overnight and then switched back on...I get a 'printer is not connected' message and have to go through the re configure routine all over. I am minded to think this is a router problem as the same issue is happening to my wifes Mac Book Pro (which is only a few weeks old)...any suggestions.. -
Network connection after waking from sleep
Hi... More or less any time I allow my MacBook Pro to go to sleep, when I wake it up I am nearly always disconnected from my Airport connection (I connect to a NetGear wireless router via my internal Airport card). I go up to the menu bar and click on the now grey airport icon and I do still see my network in the list of available networks. I click on it, after several seconds a message comes up that says "there was an error joining the Airport network "network name""... But I then simply click on OK (rather than Try Again, I've learned that by trial and error) and the network reconnects just fine... Then when I let the machine sleep again at some later time, I do that all again... Any suggestions of what might be going on??? I do have "Use Interference Robustness" turned on (not that I know why exactly) but I've also had it off before and that seems not to matter... Any suggestions??? thanks... bob..
FW800 G4 dual 1.25 Ghz and 17 inch MacBook Pro Mac OS X (10.4.8)I have "join preferred networks" selected, and mine os the only one on the list, and it still does not connect after waking from sleep. It is WEP security, not WPA2. I checked out the following article, but it was of no help:
http://docs.info.apple.com/article.html?artnum=304482 -
Restarting after waking from sleep
I have a mid 2010 macbook pro running Mountain Lion OS X 10.8.3 of which keeps restarting after being left in sleep mode for an hour or two. When waking from sleep mode, the mac functions for about 5 seconds, before restarting by itself. I have tried deleting certain plist files (as suggested by other posts) but that doesn't seem to have helped. I have also recently installed a new hard drive, but i continue to have the same problem. Below is the panic report from the recent restart after waking from sleep mode:
Thu May 23 22:40:58 2013
panic(cpu 0 caller 0xffffff7f9a7957f2): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811b9a5000 0x0a5480a2, D0, P2/4
Backtrace (CPU 0), Frame : Return Address
0xffffff810a102f80 : 0xffffff801a01d626
0xffffff810a102ff0 : 0xffffff7f9a7957f2
0xffffff810a1030b0 : 0xffffff7f9a8923b9
0xffffff810a103110 : 0xffffff7f9a89242e
0xffffff810a103180 : 0xffffff7f9abb8c82
0xffffff810a1032b0 : 0xffffff7f9a8b8fe8
0xffffff810a1032f0 : 0xffffff7f9a79d567
0xffffff810a1033a0 : 0xffffff7f9a79b05a
0xffffff810a1035a0 : 0xffffff7f9a79c983
0xffffff810a103670 : 0xffffff7f9b8b5790
0xffffff810a103730 : 0xffffff7f9b8e0f98
0xffffff810a1037b0 : 0xffffff7f9b8c8308
0xffffff810a103810 : 0xffffff7f9b8c8be9
0xffffff810a103860 : 0xffffff7f9b8c909b
0xffffff810a1038d0 : 0xffffff7f9b8c98d1
0xffffff810a103910 : 0xffffff7f9b89534f
0xffffff810a103a90 : 0xffffff7f9b8c5e39
0xffffff810a103b50 : 0xffffff7f9b893de8
0xffffff810a103ba0 : 0xffffff801a4650c9
0xffffff810a103bc0 : 0xffffff801a466670
0xffffff810a103c20 : 0xffffff801a46408f
0xffffff810a103d70 : 0xffffff801a0984a1
0xffffff810a103e80 : 0xffffff801a020aed
0xffffff810a103eb0 : 0xffffff801a010448
0xffffff810a103f00 : 0xffffff801a01961b
0xffffff810a103f70 : 0xffffff801a0a5dd6
0xffffff810a103fb0 : 0xffffff801a0cdd43
Kernel Extensions in backtrace:
com.apple.NVDAResman(8.1)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a738 000->0xffffff7f9aa45fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
com.apple.nvidia.nv50hal(8.1)[5F021999-8B18-3BD5-9B98-90617E638A63]@0xffffff7f9 aa53000->0xffffff7f9ad74fff
dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
com.apple.GeForce(8.1)[A15BB65E-3501-340F-87CB-2FD2BAD33E35]@0xffffff7f9b882000 ->0xffffff7f9b94efff
dependency: com.apple.NVDAResman(8.1.0)[A26D2A3D-C06F-3A0F-BCFF-901A98C93C3D]@0xffffff7f9a7 38000
dependency: com.apple.iokit.IONDRVSupport(2.3.7)[38C214C0-83C8-3594-8A4C-DC6AC3FEC163]@0xff ffff7f9a724000
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f9a6a3000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[74E3E50F-E50A-3073-8C96-06F854292A91]@0 xffffff7f9a6e1000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide: 0x0000000019e00000
Kernel text base: 0xffffff801a000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 3064164203775
last loaded kext at 299154607765: com.apple.filesystems.smbfs 1.8 (addr 0xffffff7f9c477000, size 229376)
last unloaded kext at 354384336276: com.apple.filesystems.msdosfs 1.8 (addr 0xffffff7f9c469000, size 57344)
loaded kexts:
com.Logitech.Unifying.HID Driver 1.3.0
com.Logitech.Control Center.HID Driver 3.7.0
com.apple.filesystems.smbfs 1.8
com.apple.filesystems.exfat 1.3
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AGPM 100.12.87
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDA 2.3.7fc4
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleMikeyDriver 2.3.7fc4
com.apple.GeForce 8.1.0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.1.3f3
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.ApplePolicyControl 3.3.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.SMCMotionSensor 3.0.3d1
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleIntelHDGraphics 8.1.0
com.apple.driver.AppleIntelHDGraphicsFB 8.1.0
com.apple.driver.AppleMuxControl 3.3.0
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBCardReader 3.1.7
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.5
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AirPort.Brcm4331 614.20.16
com.apple.driver.AppleUSBHub 5.5.5
com.apple.iokit.AppleBCM5701Ethernet 3.6.0b1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.3.7fc4
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.nvidia.nv50hal 8.1.0
com.apple.NVDAResman 8.1.0
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleSMC 3.1.4d2
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.3f3
com.apple.driver.AppleHDAController 2.3.7fc4
com.apple.iokit.IOHDAFamily 2.3.7fc4
com.apple.driver.IOPlatformPluginFamily 5.3.0d51
com.apple.driver.AppleGraphicsControl 3.3.0
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.5
com.apple.iokit.IOUSBMassStorageClass 3.5.1
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.driver.IOBluetoothHIDDriver 4.1.3f3
com.apple.iokit.IOBluetoothFamily 4.1.3f3
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.5.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IO80211Family 522.4
com.apple.iokit.IOUSBUserClient 5.5.5
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.5.5
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Any suggestions would be greatful,
Thanks,
MarieReplace the pair of DIMMs first.
Monitor the temps inside.
Install and use SmcFanControl 2.2
Run Apple Hardware Test
You may want to try a clean system install to test with once you have the RAM replaced. Faulty RAM can cause all kinds of issues. And dirty files. Some deeper check for corrupt files than Disk Utility is probably in order.
There is a significant "Inrush-current" on boot and wake from sleep with the 2008s. They need good power, a 1500VA/900W UPS, and sensitive to other equipment on the same circuit.
Inrush current
Maybe you are looking for
-
Hi, Today we had the exact scenario reported here http://support.microsoft.com/kb/974205 The server went unresponsive and the sql service had to be restarted. This sql server is the DB server for a sharepoint farm. We are running Microsoft SQL Server
-
Type Shifting/Smearing as Animation progresses in the Timeline when .fla file is reopened.
A simple animation has been created using words as symbols. Each word has it's own movement, coming in from left to right, top to bottom, etc. There are no issues when the file is first created, but on occasion, when the .fla is then reopened (on the
-
I need help BAD/___sbsstatic___/migration-images/migration-img-not-avail.png I just finished my BIG project on my FCP6, and decided to grab a bite to eat. I closed down my computer and went to eat. When I returned with my client to view his movie, my
-
DVD Player Hasn't set the REGION code
I just got a new MacBookPro (a replacement for one that had failed). Well, I restored all my data and am working fine... BUT... I think all my settings think that I've already set the Region Code of the DVD drive. But, using a tool, I was able to ver
-
Good afternoon. I am checking to see if what I am trying to do is possible before attempting to do it. I am new to custom reports and learning as I go. We recently switched from an Avaya System to a Cisco System and lost some of our previous repor