Shuts itself off

My ipod nano shuts itself off ... after about 90 seconds, when the screen would normally go dark but the music keeps playing, it has suddenly started just shutting itself down. What happened?

i had the same problem with my pearl, basically if u are using the pouch it came in, dont, it somehow confuses the phone so it crashes, that sorta fixed the problem with mine, if u can master wipe it, that should fix it, it wil be a dodgy programe on ur phone, or if all else fails, take it bak to where u got it from, and they should send it bak to blackberry and u might get a new phone, thats what i did eventually..hope this helps

Similar Messages

  • Satellite U400-14B shuts itself off and now it wont start up

    Hi
    just got a new Satellite U400 this week.
    Was working perfectly the first few days, then last night, it just shuts itself off and now it wont start up.
    I press the on button and the row of lights next to it light up, but nothing happens I dont even get as far as the Toshiba screen.
    I have tried many things. I left it plugged in overnight, tried taking the battery out and no result as of now.
    The little led lights on the bottom indicate that there its plugged in, the battery is white not orange, when pressed they all light up again only for a split second.
    The only thing I can liken this too is when a car wont start and you keep turning and turning the key, well in this case pushing a button, and nothing happens, the fans dont whir or anything...
    help please...

    Has extra Memory (RAM) been installed? Try removing one Memory Module and try a different Memory Slot.
    If bad memory is not the problem, then there is not much else you can do except send it to an ASP for warranty repairs.

  • IPhone constantly shuts itself off randomly after 3.1.2 upgrade

    So I decided to upgrade my iPhone 3G to the newest software when it was first available and now, inconsistently, it has been shutting itself off.
    All I would do is lock the phone, such as after sending a message, and place it in my pocket. When I check it again, I realize it will not turn on, and have to fully power on the thing.
    Is this a normal problem? What can I do? Should I downgrade? Is that even possible?
    I would just like my iPhone to work like it should, all help is appreciated greatly.

    How can I set it as a new iPhone? The last time I reset all the settings and plugged in my phone, all of the information synced itself very quickly, I didnt have an option to restore as a backup or set up a new phone.
    You seem to be confusing reseting the settings and restoring the phone. See this Apple support article - Restoring your iPhone... section. (This is also clearly described in the User Guide - bookmarked in iPhone Safari):
    http://support.apple.com/kb/HT1414
    I aslo recommend disabling automatic syncing when connecting your phone. This can be selected on your device summary page or set globally for all devices.
    Preferences > Devices > Prevent iPhones and iPods from syncing automatically

  • Hp laserjet p1102w networked printer shuts itself off

    Hi, I have a networked (not wireless network) printer, which is plugged into a computer that is always on. However, it shuts itself off randomly, even though I have set it to never do so. This means that users must walk over, turn the printer on, and occasionally restart their computers before they are able to print, which sometimes causes them to lose work. Occasionally the users will also receive a message like:
    The printer spooler on the server was not responding
    Which means someone must reset the server spooler before it will print. 
    I have also set it to go into power-save mode at the longest interval, one hour, but it frequently goes to sleep within minutes of a print-job, often sparking the above issues. 
    If there is anything that I can do further to keep from forcing the users to constantly turn it on, or to keep from having to restart the spooler every day, that would be great.
    I am working with machines using Windows 7 and 8, and with a Windows Server 2012.

    I got to this screen by going to the web interface by typing the printer's IP address into a web-browser's address bar.
    Sorry for the delayed response. I will do my best to assist you when I get home.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Today I was shopping and I went to check the time on my Iphone but it had shut itself off for no reason and now it won't turn back on. What should I do?

    Today I was shopping and I went to check the time on my Iphone but it had shut itself off for no reason and now it won't turn back on. What should I do?

    It could have powered off. Try holding the sleep button down for a few seconds until the apple logo appears to restart it

  • My computer has been acting weird lately.  Shuts itself off, the mouse goes off in all angles, does not go into sleep mode sometimes and instead shows on a gray screen definitions of words in 3" letters!  Do I have a virus?

    My computer has been acting weird lately. Shuts itself off, the mouse goes off in all directions, does not go into sleep mode sometimes, instead shows a gray screen with word definitions in large 3" letters that continuosly flows across the screen.  Do I have a virus?

    Doesn't really sound like a virus.
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    How many of these you can answer...
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab, are there a lot of Pageouts?

  • My phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is gone

    my phone when attached to the charger boots up reaches the password screen, i enter my password and it goes to home screen then shuts itself off and reboots. is my phone possessed or how can i fix it? can i get the data off of it even if the phone is not salvageable? thank you so much in advance for your help!

    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then see Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    Note.  Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...

  • New mac pro is shutting itself off

    Newly installed Mac Pro running 10.9 is shutting itself off. how do I prevent this?

    Launch the Console.app in /Applications/Utilities/, select the system.log, and see if there's anything in it that could be calling for the shutdown.

  • Why does my nano iPod 7gen shut itself off during a pause when running

    I am using the nano ipod 7th generation and nike plus. It  shuts itself off if I have hit pause during a run while taking a break. This is very frustrating because I have to start my run over, it also shows up as two runs in one day. How can I fix this?

    I usually hit the pause. I have tried putting it to sleep as not to bump the resume workout on the face. This doesnt help either. After a few minutes when waking up the ipod it shows the nike screen and I have to start a new workout.

  • Is the MIFI6620L supposed to shut itself off if you don't have a device using it and you are not currently charging it?  I am having to push the on button to restart it everytime I want to use my computer or tablet.  I don't want to leave it plugged in al

    I have had the MIFI6620L for less than a week.  It keeps shutting itself off, and I couldn't find any mention of this in the user manual.  Perhaps it is a battery saving feature, and not a problem with the unit?  This is happening after the battery is charged and I have the unit disconnected from the outlet.  Thanks.

    Yes that is correct.  Jetpacks will power themselves down after a default amount of time to preserve battery life.  This feature should only be happening when there is no activity on the Jetpack.  If you have devices connected it should remain online.
    As a Jetpack owner it is a good idea to build a habit of powering on and off your device on a regular basis.  This will help you keep your Jetpacks connection to the towers fresh and less prone to disconnections.  The best way to use a Jetpack is to power up, consume data and then power down until next time.

  • My iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?

    my iphone 4s shuts itself off all the time. starts normal and then shut it off and start all over again, what is wrong?

    Your iPHone is designed by intention to shut off when there is a reason for the softwarer to believe that danger is immenent to the hardware. This can occurr if the software is running applications that have been corrupted due to all types of different scenarios. My best advice to you would be to restore your device back to default manufactures settings and do NOT restore the current backup of the IOS program currently running.
    If this corrects the problem with your device intermittently restarting you will then know you have had applications there were corrupted on your device. Once you are convinced there are no issues with the hardware of your device you then are free to begin downloading software apps that were earlier on the device.
    Good luck.

  • I have a Photosmart C6180. "Improper Shutdown" comes up and then the printer shuts itself off

    An "Improper Shutdown" message started appearing.  Right after this happens the printer shuts itself off, and then starts up again.  The message reappears, and the same cycle happens again.  This continues without stopping.  Pushing any button except the on/off switch makes the same thing happen.  Pushing the on/off switch right at the moment that the printer starts up, causes the printer to shut off, but as soon as I start it up again, the same message reappears and the cycle starts again.

    maxbob,
    Click this link to go to a page where others found a solution for the same issue you are having and the same printer. Be sure to check out all the posts on this thread as it looks like there were a few different suggestions that worked. Hope this helps.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

    My iMac won't boot up fully. It stays stuck in the gray screen with the pinwheel spinning, then after about 5 minutes just shuts itself off.

    Try SMC Reset (unplug it from the back of the computer for 10 seconds then plug it back. in)
    Try PRAM Reset Cmd + OPtion + P + R on start up.
    Try safe boot - hold down shift on start up.
    Try booting to install dvd (C on start up) or recovery hd (CMD + R) and using disk utility to run a verify and repair. If you still can't boot after that reinstall the operating system. If you can't find the disc or it wont boot to the disc.
    Try single mode which is cmd+S on start up. It will open with a terminal looking window in the terminal. type in /sbin/fsck -TL. If it returns *system has been modified* continue to type that command in until it comes back with macintosh hd seems to be ok. If after 5 tries it still gives you system has been modified. You may have to replace the hard drive.

  • My Droid Incredible shuts itself off all the time

    My Droid Incredible shuts itself off all the time.... when I am on a phone call, when its not being used, just whenever it feels like it. Is there any solution to get my Droid to stop shutting itself off?

    I will PM you and I can review the account to see what options we have available.

  • My ipad shuts itself off frequently - why

    I will be emailing, or web surfing, and my ipad shuts itself off.  I have tried reloading everything, I have taken it out of its case, I would like any tips on how to fix this.
    thanks

    Try this:
    1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down until you see the Apple Logo.

Maybe you are looking for

  • How to Auto Save in iteractive forms

    Hi All, I am working on an interactive forms development in SAP. The requirement is to have a auto save functionality as in MS office documents. Also can we have book marks for the documents. Your help is much appreciated. Regards, Sai

  • IPhoto not showing movies in entirety

    Running iPhoto 8.1.2... any movies (taken with various cameras, iPod or iPad) now only show up in Events as being 1 second long... and will only play that long when run. I've tried importing a new movie, and it stayed and would run in its entirety. A

  • Human Workflow is not sending Email notifications to AD users

    Hi, I'm trying to send email notification to the assigness from workflow. If I use the weblogic users with email attributes, Its sending mails. But once I switch to AD and use the AD users it's not. I have made the AD provider to be the first in the

  • Soundbooth Crashes when changing input device

    I'm running Soundbooth CS4 on Snow Leopard and can't seem to record anything. When I hit the record button and change my input setting to my line in microphone, Soundbooth crashes. It does the same thing when I try to change it under Audio Device pre

  • Creating a border around the graphic

    Hi, What's the quickest way to create a one pixel border around a graphic using Photoshop? I'd appreciate it. Thanks!