Shutting down a system

can anyone give me a program to shut down a system using the linux shut down command in java? i need it very urgently... ihave tried it for a week it doesnt seem to work....

Why dont you try to exec the command using a Runtime object ?

Similar Messages

When I close out a website it goes to my desk top and then tells me firefox is running and I have to shut down the system

when I close out a website it goes to my desk top and then tells me firefox is already running and I have to shut down my system and bring it back up and wait to log back in. It's quite frustrating.

Try Ctrl>ALT>DEL then click Start Task Manager, then find the process firefox.exe, then click end program, then try opening Firefox again.  done! If that doesn't work, then try re-installing Firefox or going to this link to safe mode area and click continue to safe mode and then try and exit, if this problem still occurs then disable extensions and plugins

Firefox exe application error the instruction at 0x60177757 referenced memory at "0x00000004" the memory could not be read- happens when shutting down the system

This happens every time when shutting down the system?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

BLue Screen shows on shutting down the system

I have a Toshiba L505 S6959 with part no PSLl0u
When ever I am shutting down the system IT bring blue screen . When I power on the system back it give a messages of the error. Please find the error as copied out pasted below. Any pls help me as I just got this Laptop less than a month ago brand new.
'Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.0.6001.2.1.0.768.3
Locale ID:    2057
Additional information about the problem:
BCCode:    1000007e
BCP1:    FFFFFFFFC0000005
BCP2:    FFFFFA600728B1F1
BCP3:    FFFFFA601FADE968
BCP4:    FFFFFA601FADE340
OS Version:    6_0_6001
Service Pack:    1_0
Product:    768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini111509-01.dmp
C:\Users\Agboola\AppData\Local\Temp\WER-186686-0.sysdata.xml
C:\Users\Agboola\AppData\Local\Temp\WER905C.tmp.version.txt
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409'
PLease any1 help

@ Terry find below the evens at the time of shutdown.
Log Name:      Application
Source:        Microsoft-Windows-User Profiles Service
Date:          17/11/2009 23:02:05
Event ID:      1530
Task Category: None
Level:         Warning
Keywords:      Classic
User:          SYSTEM
Computer:      Agboola-Office
Description:
Windows detected your registry file is still in use by other applications or services. The file will be unloaded now. The applications or services that hold your registry file may not function properly afterwards.
DETAIL -
10 user registry handles leaked from \Registry\User\S-1-5-21-1897411630-2370966577-103554390-1000:
Process 2372 (\Device\HarddiskVolume2\Program Files (x86)\Sprint\Sierra Wireless\Sprint PCS Connection Manager\SPCSUtilityService.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Microsoft\SystemCertificates\Root
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Microsoft\RAS AutoDial
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Microsoft\SystemCertificates\CA
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Policies\Microsoft\SystemCertificates
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Microsoft\SystemCertificates\SmartCardRoot
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Microsoft\SystemCertificates\trust
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-User Profiles Service" Guid="{89B1E9F0-5AFF-44A6-9B44-0A07A7CE5845}" EventSourceName="profsvc" />
    <EventID Qualifiers="32768">1530</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2009-11-17T22:02:05.000Z" />
    <EventRecordID>12042</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>Agboola-Office</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData Name="EVENT_HIVE_LEAK">
    <Data Name="Detail">10 user registry handles leaked from \Registry\User\S-1-5-21-1897411630-2370966577-103554390-1000:
Process 2372 (\Device\HarddiskVolume2\Program Files (x86)\Sprint\Sierra Wireless\Sprint PCS Connection Manager\SPCSUtilityService.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Microsoft\SystemCertificates\Root
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Microsoft\RAS AutoDial
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Microsoft\SystemCertificates\CA
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Policies\Microsoft\SystemCertificates
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Microsoft\SystemCertificates\SmartCardRoot
Process 1084 (\Device\HarddiskVolume2\Windows\System32\svchost.exe) has opened key \REGISTRY\USER\S-1-5-21-1897411630-2370966577-103554390-1000\Software\Microsoft\SystemCertificates\trust
</Data>
</EventData>
</Event>

Alerts - Text Message "To Shut Down the System"

Hi Experts,
I want to set a Alert message to pop up for all the users of Business One.Lets say the message is "Shut down the system".Can we set this predefined Alert in B1? I tried ,but it asked to link the query.I don knw how .....pls help.

In order an alert to work, not only a message is needed, more important is the event to trigger this alert. What is your condition to alert user? If this condition is not directly related to B1 itself, such as you want all user out of B1 system, then an email broadcasting to a distribution list would be a better tool to use.
Thanks,
Gordon

HT1338 why my macbook pro making lot of noise inside. Is it something to do my shutting down. I usually shut down my system in every week.

why my macbook pro making lot of noise inside. Is it something to do my shutting down. I usually shut down my system in every week.
Can anybody provide any solution on this.

What kind of noise and when? There are fans inside that run at various noise levels keeping things at the right temperature. There is a hard drive, unless you have SSD, that can make noise when the stepping motor moves the track arm. There is an optical drive that makes noise at startup.
There are noises when you move the MBP and the motion sensor engages.

Running a Java Program for every shut down of system

Hi
I have a java program that sends an email to the Admin of my network.
But this is program i just want to execute for every shutdown and on of my system
Please Tell me how to execute my java program at system shutdown time and on time..
Thanks

Despite your objective, this is not a Java issue. The real question is "How does one run a program just before system shutdown?"
How you execute such an application is system dependent. Java doesn't know when the system shuts down, only when the JVM shuts down. Unless you're willing to have JVM running the entire time the system is up, you'll need native code to detect system shutdown & launch the notification app.

Osx shut down at system start

Hey folks,
this thing is quite complicated, I will describe comprehensively since I do not know which of the symptoms are correlated to the final problem. Since yesterday evening, OSX would "spike", the whole thing whole freeze for some seconds and recover afterwards. Last night then it froze such a long time that I forced the shutdown using the On-Button. Since then, when I tried to login into my account ("excuvator") after restarting, it froze: I could only see my desktop wallpaper and the top part of the GUI (containing the time etc).
I logged in as root, activated the guest account. Using the guest account, I renamed excuvator/library into library2 and created an empty folder library. I thought I would deal with any cache, start up whatever specific configuration of that account. Unfortunately, I still could not login. So I happened to see this page and read about the shift-trick that starts the system in safe mode. I logged in as excuvator and that worked. Then I read that maybe simply restarting could solve my issue. Since then, the system appearantly always tries to start in safe mode (indicated by the progress bar under the wheel?). And, since then, it always shuts down during the starting progress, I cant see the login screen anymore.
What can I do? (since I am not home these weeks, any solution not requiring the OSX cd would be highly appreciated. But I guess, I could find one somewhere here).
Thanks,
Saman

Welcome to Apple Discussions!
The update readme says it will go through a couple of power cycles before the update is completely installed. Let it do that without interruption.

V100 overheats and shuts down; shuts down during system diagnostics

I have a V100 that has been overheating and shutting down when i run applications such as Photoshop and MS Office 2003. It has a 2Gb intel duo processor and 2Gb of RAM. I downgraded to Windows XP with service pack 2. The warranty expired in July 08 and until 3-4 months ago didn't have this problem. It happens with or without the battery, typically I have it plugged in. I took it apart partially and cleaned out any dust by the fan and such, but there was very little. I tried to run diagnostics on it through Lenovo System Toolbox (used to be called PC Dr.). During the system stress test it overheated and shutdown. I then ran the full system scan and when it got to the multicore test for the processor, it again overheated and shutdown. I'm not sure if this is an indication that the processor is failing or if maybe it just needs some thermal paste or if there is another problem going on. Any help would be appreciated.

Hi
Possibly its high temperature issue.
High temperature causes a shut down in order to protect the hardware from damage.
But the question is why the temperature increases to critical level?
One reason might be a graphic card driver from nvidia page. Such driver does not contain overheating protection. So you have to use the driver from Toshiba page.
I see you did it
Well, the notebook seems to be a new one.so usually the dust should not be a problem and the fans should work properly
One tip; please ensure that you have enough free space around the notebook to ensure good air circulation...
However, I recommend asking a ASP in your country for an check maybe its hardware related issue.

When I shut down the system, it shows that i have to stop or cancel the operations in the finder?I am unable to find out

When I try to shut down or restart the system, it shows that : The finder can't quit beacuase some oprations are still in progress. You can cancel or stop the operations ,and then try again.
COuld you please suggest how can I solve it?

If you're sure no operations really are in progress, such as a long file copy, select  ▹ Force Quit... from the menu bar, then select Finder and press return.

My control button does not allow me to return to the home page. I have to completely shut down the system and reboot to switch to another application.

My navigating button, key does not allow me to switch to other applications. To do this I have to
Shut down and reboot. I spoke with apple customer service on
Friday and they has me connect to the computer and download any new
And updated information. That resolved the issue for one day and the problem
Started again.

Try restoring your phone as a "new" device in iTunes, not from backup. When finished, eject your phone. Do not sync any content back to your phone. How are things working now? If OK, sync your content back to your phone. If not, make an appointment at an Apple store, as you most likely have a hardware issue.

Firefox exe application error the instruction at 0x60177757 referen ced memory at "0x00000004" the memory could not be read- happens when shutting down the system

this happens everytime I shut the system down

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

You need to shut down your system.....

Greetings,
I am unsure if the dump below is due to issues with the O/S (10.4) or hardware. I have been using Disk Warrior once per month for preventative maintenence. Can someone shed some light please? This is happening perhaps once per week. Thank you!
Unresolved kernel trap(cpu 1): 0x400 - Inst access DAR=0x0000000000254000 PC=0x0000000000000000
Latest crash info for cpu 1:
Exception state (sv=0x77291280)
PC=0x00000000; MSR=0x40009030; DAR=0x00254000; DSISR=0x40000000; LR=0x002FB958; R1=0x46F1B7B0; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x002FB924 0x002FB7CC 0x002FEED8 0x002FED28 0x002FEFEC 0x002B6E98
0x002B716C 0x00C6EBEC 0x00C6ECF4 0x00C6ED90 0x002C6FEC 0x002F3CA4 0x002F3C5C 0x002D13B8
0x002F3EC0 0x002F0B34 0x002EB178 0x0008C904 0x000291C0 0x000233AC 0x000AC0AC 0x00000000
backtrace terminated - frame not mapped or invalid: 0xF00800F0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.IOPlatformPluginFamily(1.8.5d0)@0xc6b000
Proceeding back via exception chain:
Exception state (sv=0x77291280)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x62BF6500)
PC=0x9000B268; MSR=0x0000F030; DAR=0xE7EB3000; DSISR=0x42000000; LR=0x9000B1BC; R1=0xF00800F0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/RELEASE_PPC
panic(cpu 1 caller 0xFFFF0004): 0x400 - Inst access
Latest stack backtrace for cpu 1:
Backtrace:
0x00095718 0x00095C30 0x0002683C 0x000A8404 0x000ABD80
Proceeding back via exception chain:
Exception state (sv=0x77291280)
PC=0x00000000; MSR=0x40009030; DAR=0x00254000; DSISR=0x40000000; LR=0x002FB958; R1=0x46F1B7B0; XCP=0x00000010 (0x400 - Inst access)
Backtrace:
0x002FB924 0x002FB7CC 0x002FEED8 0x002FED28 0x002FEFEC 0x002B6E98
0x002B716C 0x00C6EBEC 0x00C6ECF4 0x00C6ED90 0x002C6FEC 0x002F3CA4 0x002F3C5C 0x002D13B8
0x002F3EC0 0x002F0B34 0x002EB178 0x0008C904 0x000291C0 0x000233AC 0x000AC0AC 0x00000000
backtrace terminated - frame not mapped or invalid: 0xF00800F0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.IOPlatformPluginFamily(1.8.5d0)@0xc6b000
Exception state (sv=0x62BF6500)
PC=0x9000B268; MSR=0x0000F030; DAR=0xE7EB3000; DSISR=0x42000000; LR=0x9000B1BC; R1=0xF00800F0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 8.7.0: Fri May 26 15:20:53 PDT 2006; root:xnu-792.6.76.obj~1/PModel: PowerMac11,2, BootROM 5.2.7f1, 2 processors, PowerPC G5 (1.1), 2.3 GHz, 6.5 GB
Graphics: NVIDIA GeForce 6600, GeForce 6600, PCI, 256 MB
Memory Module: DIMM0/J6700, 256 MB, DDR2 SDRAM, PC2-4200U-444
Memory Module: DIMM1/J6800, 256 MB, DDR2 SDRAM, PC2-4200U-444
Memory Module: DIMM2/J6900, 1 GB, DDR2 SDRAM, PC2-4200U-444
Memory Module: DIMM3/J7000, 1 GB, DDR2 SDRAM, PC2-4200U-444
Memory Module: DIMM4/J7100, 1 GB, DDR2 SDRAM, PC2-4200U-444
Memory Module: DIMM5/J7200, 1 GB, DDR2 SDRAM, PC2-4200U-444
Memory Module: DIMM6/J7300, 1 GB, DDR2 SDRAM, PC2-4200U-444
Memory Module: DIMM7/J7400, 1 GB, DDR2 SDRAM, PC2-4200U-444
AirPort: AirPort Extreme, 404.2 (3.90.34.0.p16)
Bluetooth: Version 1.7.5f10, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en2
PCI Card: GeForce 6600, Display, SLOT-1
PCI Card: bcom5714, network, GIGE
PCI Card: bcom5714, network, GIGE
Serial ATA Device: WDC WD2500JS-41MVB1, 232.89 GB
Serial ATA Device: ST3300831AS, 279.46 GB
Parallel ATA Device: HL-DT-ST DVD-RW GWA-4165B,
USB Device: Bluetooth HCI, , Up to 12 Mb/sec, 500 mA
USB Device: Hub, , Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: Apple Optical USB Mouse, Mitsumi Electric, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
USB Device: Apple Cinema Display, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
USB Device: Hub, , Up to 480 Mb/sec, 500 mA
USB Device: Hub, , Up to 480 Mb/sec, 500 mA
USB Device: ImageMate CF Reader/Writer, SanDisk, Up to 480 Mb/sec, 500 mA
USB Device: Multi-Card Reader, Lexar Media, Up to 480 Mb/sec, 500 mA
FireWire Device: > LaCie d2 DVD-RW Firewire, LaCie Group SA, Up to 400 Mb/sec
FireWire Device: LaCie Hard Drive FireWire+, LaCie Group SA, Up to 400 Mb/sec
FireWire Device: LaCie Hard Drive FireWire+, LaCie Group SA, Up to 400 Mb/sec
FireWire Device: 3200JB External, WD, Up to 400 Mb/sec
FireWire Device: unknown_device, unknown_value, Up to 400 Mb/sec
FireWire Device: 3200JB External, WD, Up to 400 Mb/sec
FireWire Device: 3200JB External, WD, Up to 400 Mb/sec
FireWire Device: 3200JB External, WD, Up to 400 Mb/sec
FireWire Device: unknown_device, unknown_value, Up to 400 Mb/sec

Your going to have to strip your box down to one boot drive, one keyboard/mouse and a video card/monitor. Leave the RAM in.
See if the KP's keep continuing, if so then backup your files, C boot from the installer disk (make sure it's pristine) and select Disk Utility Erase w/Zero and then reinstall Tiger and update. That should take care of the OS and bad sectors being the problem
See if KP's still continue, if so then it's time to strip the RAM down to the two inner slots. Go on and test out your RAM by inserting two sticks in, running for awhile, two more, etc. etc. Run Memtest.
Depending on that you'll have to start investigating the spare internal drive and exterior devices.
Keep working your way up and keep a record of all your steps because you have a lot of potential of hardware conflicts.
It could simply be the fresh OS install took care of it. It could be because you have so many devices and installed drivers they could be competing for power and OS resources/software conflicts.
Make sure your machine has a clean and steady source of power, sometimes UPS are glitchy, try a dedicated line from your circuit breaker.
Good luck, you got a lot of work cut our for yourself.

Shut down of system using java.

Hi All,
Is there a way in java to shutdown the system closing all applications. First of all is it possible??
regards,
Rajesh Vincent.

if ur operating system is windows
then this funny code might do the trick
its a robot so after running it dont touvh ur keyboard and mouse
here's the code
import java.awt.*;
import java.awt.event.*;
public class test
     Robot myRobot;
     public void mouseClick( int offX, int offY )throws AWTException {
          myRobot=new Robot();
          myRobot.mouseMove(offX,offY);
          myRobot.delay( 1000 );
          myRobot.mousePress(InputEvent.BUTTON1_MASK);
          myRobot.delay( 1000 );
          myRobot.mouseMove(40,555);
          myRobot.delay( 1000 );
          myRobot.mouseRelease(InputEvent.BUTTON1_MASK);
          myRobot.mousePress(InputEvent.BUTTON1_MASK);
          myRobot.mouseRelease(InputEvent.BUTTON1_MASK);
          myRobot.delay( 1000 );
          //myRobot.keyPress(Event.ENTER);
public static void main( String args[] ) throws AWTException
          System.out.println("start");
          test app = new test( );
          app.mouseClick(40,590);
          System.exit(0);

[SOLVED] Normal user is able to shut down the system (systemd conskit)

Hi
I noticed that i'm able to shutdown, reboot, or halt my system without root privileges. I don't know since when this is.
groups:
wheel optical kismet <username>
It's not an actual problem since i'm the only one using this computer. But since linux is a multi user system i think this is not as it should be.
Any ideas? Or is this how it should be?
Regards,
Archie
Last edited by Archdove (2012-10-23 19:44:52)

I'm sorry, I wrote post above from my phone so I gave you wrong command. Right one is loginctl show-session 1
Here is my output.
Id=1
Timestamp=Tue, 23 Oct 2012 18:43:51 +0200
TimestampMonotonic=11555104
DefaultControlGroup=name=systemd:/user/fuchs/1
VTNr=1
TTY=tty1
Remote=no
Service=login
Leader=380
Audit=1
Type=tty
Class=user
Active=yes
State=active
KillProcesses=no
IdleHint=yes
IdleSinceHint=1351010626062490
IdleSinceHintMonotonic=5933008
Name=fuchs
Line Active=yes tells you if session is properly authorised (in my case it is). If it is, you are able to shutdown, reboot, etc. without typing in password. This can be achieved with consolekit or polkit from testing repo (deprecates consolekit). Because you are not using testing repo, consolekit is probably responsible.

Shutting down a system

Similar Messages

Maybe you are looking for