Shutting Down CF8 Stand-Alone Version on Windows

I have installed CF8 Developer Version with Stand-Alone
server on WXP. Would like to upgrade to 8.0.1. During upgrade,
updater tells me I needs to shut down server and Windows services
to perform upgrade. Looked around in CFIDE Admin for instructions
on how to shut down. Couldn't find any.
How to do?
Thanks in advance.

You should start or stop Coldfusion as a Windows service. You
do so in the Control Panel. Navigate to
Administrative Tools => Services. Right-click on
Coldfusion 8 Application Server. To shut down, select
Stop.

Similar Messages

How can i download a stand alone version of adobe reader 9.5.2 for windows XP

I can download the .msp for 9.5.2 but this will not install on Windows XP. I need to download a stand alone version for deployment to client machines.
Please help.

Here is the Recommended Path
Reader 9.5.0 -> 9.5.1 (Quarterly)-> 9.5.2 (Quarterly)
Please slso consider the article mentioned below for Reader Deployment
http://helpx.adobe.com/acrobat/kb/update-patch-acrobat-reader-7.html
~PRANAV

Can someone send me the link to the stand alone version of light room 5 were I can buy it. Thank you in advance

Were can I found the stand alone version of lightroom 5?

Rob,
Thank you so much.
In one way or another I managed to purchase the upgrade of lightroom instead of full version.
It is now corrected, thank you so much
Best Regards,
Fredrik
18 aug 2014 kl. 11:11 skrev Rob Cole <[email protected]>:
Can someone send me the link to the stand alone version of light room 5 were I can buy it. Thank you in advance
created by Rob Cole in Photoshop Lightroom - View the full discussion
If you go to the main Lightroom page - where most links take you to cloud signup, at the very bottom, click on "Products" - scroll down to 'Lightroom'..
Products
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6649902#6649902
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Accidently shut down my Mac Book Pro during Windows 7 installation . When re-starting it says "Press any key to boot from CD or DVD". But keybord is not working . and i have the windows CD inside the drive . Pls hlp me to boot the mac again .

I have accidently shut down my Mac Book Pro during windows 7 installation . When I re started it it began to say " Press any key to boot from CD or DVD " but the keyboard is not working . So I cannot boot It and the CD is also in the drive . Please help me to boot back to Mac book Pro and give me a way to start the key bord .

Hey rudreshchoubey,
Thanks for the question. The following resource may help to resolve your issue:
Boot Camp Installation & Setup Guide
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
If Windows doesn’t install properly
Verify that you’re using an original, full version of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, or Windows 8 Pro.
Restart your Mac and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc into the optical drive or insert the USB flash drive with Windows into a USB port on your Mac. Select the Windows installation disk icon, then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
Thanks,
Matt M.

Where can I get the free stand alone version of flashplayer?

Where can I get the free stand alone version of flashplayer?

Try here:
http://www.adobe.com/support/flashplayer/downloads.html#fp11
Or
http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_heading_4
Or
http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html

How to start or shut down database using sql developer in windows

Dear Sir/Madam,
how we start or shut down database using sql developer in windows
we are using oracle 11g release2, unix, java & oracle oracle weblogic administration
Thanks & Regards
Manish Kumar
Datbase Team
TCS Ltd.

HI, Welcome to OTN form,
SHUTDOWN is not a SQL statement but a SQL*Plus command . You cannot use SHUTDOWN in PL/SQL.
Check following link:
http://docs.oracle.com/cd/E11882_01/server.112/e16604/ch_twelve042.htm#i2699551
More Information please check OTN discussion: https://forums.oracle.com/thread/2349159
Thank you

How do I change the default on shutting down Lion to NOT relaunch open windows?

How do I change the default on shutting down Lion to NOT relaunch open windows? And how can I have Safari always open in full screen mode? I have to set it every time I open Safari.

The feature you are talking about in System Preferences does work and is not related in any way to the one at startup.
One restores the windows of an application you've quit, the other reopens all windows you had open at shutdown or restart.
Why should "I" have to constantly turn off a checkbox when I shutdown the system?
You don' t have to. Did you have a look at my post just above yours? With a double click you can have your restart without opening the last open windows. That's less than clicking the apple icon and selecting "restart" or "shut down" and then clicking "Restart" or "Shutdown" again.

Hi, i'm trying to download the Lightroom 6 stand alone version and get the following message right after a click the checkout box: "The account was registered for a different country. Please sign out and sign in using an existing account for this country.

Hi, i'm trying to download the Lightroom 6 stand alone version and get the following message right after a click the checkout box: "The account was registered for a different country. Please sign out and sign in using an existing account for this country." I'm in Namibia and tried to change my country from Africa to USA but still the same problem. TIA

Hi Annen,
Please refer the following forum thread.
Trying to purchase trial period in different email address - error message "Error in Your Order The account was registered for a different country. Please sign out and sign in using an existing account for this country. Ok"
Regards,
Sumit Singh

Can I backup between a testversion and stand-alone version?

Can I backup between a testversion and stand-alone version?

You are correct, the CC version is activated with your Adobe ID and password after you have signed up for the creative cloud plan. You can uninstall that CC version and install the standalone. It is the same program, and will open the same catalog. You don't need to back up anything. Just change over to the standalone program and start Lightroom. Everything will function just the same6.

Where can I find the link to download the upgrade from 5 to Lightroom 6 (stand alone) version?

Where can I find the link to download the upgrade from 5 to Lightroom 6 (stand alone) version?

Just to be clear for others who might read this thread: There is a free trial available for both CC and standalone (perpetual license) customers. The free trial for both sets of customers is called "CC"; but if at the end of the trial you want to convert to a standalone (perpetual) license, it's just as easy as with previous versions. You pay $149 ($79 if upgrading), get a license key, and enter the key into the free trial.

Shut down issue on 27" iMac running Windows XP using VMWare Fusion 3

I'm running Windows XP on a 27" iMac using VMWare Fusion 3. When I try to shut down the Mac system without using Windows, a dark (not black) screen covers the screen from top to bottom and presents me with a screen, stating in multiple languages that I must press the power button for 5 seconds and then restart the Mac. Then the iMac will close normally.
However, if I run both the Mac system and Windows, and then close Windows, VMFWare Fusion 3, followed by the Mac system, the iMac shouts down normally.
What's going on? Has anyone else experienced this? Does anyone have a solution?

I run XP under Fusion 3 and have not seen this issue. What you are getting is a Kernel Panic. There should be more information in your console logs about the reason.
Here is some info on KPs to help you.
http://www.thexlab.com/faqs/kernelpanics.html
Goodluck.

Lightroom 6 stand-alone version and creative cloud desktop app

Will the stand-alone Lightroom 6 version install also "creative cloud desktop" application (like the cc trial) or will it be really a stand-alone software, without any other software (which will continuously and silently connect to the internet) "bundled" ?
Thanks

Thanks, that's unfortunate.. I'm planning to update and I really hoped that buying the stand-alone version would have resulted in having a different installer but to me it's a selling factor not having additional software that does its things online without asking (which, if blocked with a firewall, prevents the trial of LR to work at all).
I'll try to understand if the cc will also be uninstallable afterwards keeping lr6 working correctly (if you'll try to uninstall it in a month, please let me know).

Student discount for Lightroom 6 upgrade (stand-alone version)

Hi!
I was just wondering, if there is a student discount for the new lightroom 6? I would buy it as an upgrade and as a stand-alone version.
Thanks in advance for insights!
Cheers

JimHess: Yep, I just got LR 6 as an upgrade from LR 5 for $79. Thanks!
opdesigns: It is the upgrade which you can get for $79. However, the upgrade will only work if you have a valid licence key for your previous version. I faced the issue that I did not have mine with me, since I am travelling at the moment. But this page helped to find my key : Preference and other file locations in Lightroom 5

Download Reader 9.1 Stand Alone Version

Does anyone know where I can get a copy of Reader 9.1 Stand Alone Version, not the one that downloads automatically.
I need to update this on 4000 PCs and I want to deploy by SCCM. To do this I will need this version.
Cheers
Rob

You would get it at Adobe.com - right on the front screen. For a distribution, you may need to read carefully. You may need to notify Adobe of the use and get permission. There should not be a problem, but there is a distribution issue. I know that I do this every year for a CD that I create with Reader included. For more questions on Reader, go to the Reader forum as already suggested.

Reboot and shut down scripts failed on open dialogue window

I have a headless server.
It is scheduled to shut down at 01.00 AM via the control panel.
I have a script (tested it works) to shut down the server should the control panel fail.
tell application "System Events"
shut down
end tell
Should this fail for some reason there is a second script that tell the computer to reboot shortly before the control panel schedule should start the server.
tell application "System Events"
restart
end tell
Yesterday it failed to execute either script. ITunes had been running and checked for updates and found one. It was installed and this resulted in the dialogue box appearing that wants you to promise not to steal the code etc. No person there to click OK so it hung and cancelled all processes.
So this stopped the shut down as well as the reboot.
The reason I have this script is as to make sure the computer has no hanging programmes or windows and shuts down and fires up on the desired time.
Anybody knows how to make it force to quit the programme?
Or better would be (and my preference too) to have it check if such windows are open and OK them before shutting down.
I know this is only a one in thousand occurrence, but it would be nice to have it not happen again, this time I was there to fix it.
Thanks.

'b4' - ?
Your problem is not with the provided instructions; but, the version of 'Script Editor', SE, you use.
I use SE, v. 2.0 (43) from a 'Panther' (MacOS X 10.3.x) installation. This application version works on PPC Macs running 'Panther' and 'Tiger' (MacOS X 10.4.x), and Intel Macs running 'Tiger' and (dog crap) 'Leopard' (MacOS X 10.5.x). At least here.
The features and (intuitive) ease of use of SE v. 2.0 are superior to its equivalents of 'Tiger' and (dog crap) 'Leopard'. Besides allowing one to view the 'Description' textarea field of a 'Run Only' script, SE v. 2.0 allows one to select all of the 'Suites' titles in the left side list, click on the right side panel, and then search for any character, word, or string - such as 'a', 'is', 'the', 'reference', 'in MHz' - anything. Try such a search with SE v. 2.1 and v. 2.2.
Try this example:
Select SEs' 'Window, Library' menu item. A window titled 'Standard Additions.asdictionary' will appear.
From the 'Library' windows' list, double click on 'StandardAdditions'.
SE v. 2.0 only - Select all of the suites of the left side panel, then click once on the right side panel.
In the search field (SE v 2.1 and v. 2.2) or search window (SE v. 2.0) enter 'in MHz', and press the <return> key. Did SE v. 2.1 or 2.2 find it? SE v. 2.0 goes right to it; even highlighting the search string result.
As an exercise - waste your time looking for 'in MHz' in SE v. 2.1 and / or v. 2.2.
Hint 01: Search for 'system'. Now you have a one (1) in four (4) chance of locating the user desired string (of 'in MHz') by viewing the text of each listed result.
Hint 02: Try searching by 'Description' - click on the search 'magnifying glass' and a popup button of choices appears - click on the 'Description' menu item. Still, unlike with SE v. 2.0, SE v. 2.1 or v. 2.2 does not actually highlight the located character, word, or string.
Ok, you finally located the line of 'in MHz'; but now - you want to see all of the commands of the related 'Suite' - how do you do it? In SE v. 2.0 you may have to scroll up a little; but, in SE v. 2.1 and v. 2.2 ...

Shutting Down CF8 Stand-Alone Version on Windows

Similar Messages

Maybe you are looking for