Shutting down one tunnel shuts them all down

I have several remotes sites connected to "home" with Cisco 891 routers at each remote site.
"Home" actually consites of two different data center sites, each with a Cisco 3845 router terminating the IPSec tunnels there. One home site provides VOIP phone service, the 2nd home site provides PC Data.
Each 891 router has two IPSec over GRE tunnels configured, one tunnel goes to the VOIP home site's 3845 router, the 2nd tunnel goes to the DATA home site's 3945 router.
All of my pre-existing 891 routers are still running IOS 12.4(22)YB5, and are working fine.
My newest 891 router, purchased recently for a new remote site, shipped with IOS ver 15.0(1)M4, and when I have both tunnels configured similarly to the others, both tunnels come up and everything seems to work fine, but if I disable the VOIP tunnel with the "shutdown" command on the tunnel interface for VOIP, then the data tunnel will not come up at all, with full verbose crypto logging turned on, I never even see an attempt to bring the data tunnel up, and when I issue a "no shut" on the VOIP tunnel, both tunnels come right up.
This behavior is not seen on the original 891 routers still running 12.4. I can shutdown the VOIP tunnel and the DATA tunnel will come up, stay up just fine.
I really do not need the VOIP tunnel at this new remote site for the immediate future, but would like to keep the configs in place for the future, and also to keep all my 891s configured identically (different ip numbers of course) for consistancy's sake and easy of management.
Is this a known bug in IOS 15.x that if you issue a shutdown on one tunnel interface, it kills them all?
Do I need to install 12.4 on this 891? I'd rather keep the IOS on it that it shipped with.

I think I've decided just to roll back the IOS to 12.4 instead. That way I'll be truly consistant with IOS and configs across all my 891 remote site routers. 12.4 has been working perfectly well at the other locations. I really don't have time to fool around with debugging IOS problems unless Cisco wants to pay me my hourly consulting rate , I just need a known solution that works right now and 12.4 is it.

Similar Messages

  • How do I condense my itunes files? As each new OS came out, I put it on a new drive...now I have 4 SSD drives, with 2 copies of iTunes..how do I condense them all down to one all-encompassing library?

    As each new OS came out, I put it on a new drive...now I have 4 SSD drives, with 4 copies of iTunes..how do I condense them all down to one all-encompassing library? Early 2008 Mac Pro Tower.

    dsf,
    Not sure exactly how you moved your library but this link may help
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive/

  • Changing one checkbox changes them all

    Hello,
    I'm using Acrobat Pro X. In my pdf I am adding fields but suddenly Acrobat crashes. I open the document again, ignore the restore/saved version as I recently saved and re-opened from that local copy.
    Suddenly whenever I edit a checkbox's name it reproduces that name for all the checkboxes on the page. Deleting the box and starting over produces the same error.
    Also, the tab order box is now completely grey.
    Thanks for any help.

    It sounds like something is wrong with the file. I would start with a virgin PDF as you originally did, making sure all of the fonts are embedded, and copy & paste the fields from the old to the new and try again.

  • An artist name comes up twice on my ipod (just for one artist not them all)

    I checked the caps and everything for the artists name on both songs but then come up as
    Samhain
    Samhain

    This is due to the way information is stored w/ .mp3 files. There are actually two artist listings for each mp3 file and if both are not identical, then you will get 2 or more listings for the same band name. So for each mp3 file there is an "Artist" listing and an "Album Artist" listing. Even if the artist is "Samhain" for all of your songs, if the album artist is not the same, then you will have multiple listings for Samhain.
    To correct this, highlight all the songs for Samhain (a great band btw), right click and select "Get Info". Type Samhain for both the Artist and Album Artist fields.

  • How can I remove the flags on emails on my Ipad all at the same time. I marked them all by mistake 4800 :(

    i marked by mistake all my emails with a flag how can I remove them all at the same time

    Click on 'Music' in the iTunes sidebar. Look to see whether you have a 'Kind' column:
    If you haven't, choose 'View Options' from the 'View' menu and check 'Kind':
    Now go to the Music list again and click on the label of the 'Kind' column. This will group all your AACs and MP3s together. Locate the MP3s: click on the top one. Hold the shift key and click on the bottom one to select them all. If you want to save them drag them to a folder on your Desktop. Then hit 'Delete'. IMPORTANT: when promted, choose to have them moved to the Trash, otherwise they will be removed from the list but kept in the actual library.

  • I have a 2010 Macbook Pro and am a very new user to Mac community. My Mac is just hanging and I am unable to shut it down or do anything at all.  I left it for 2.5 days hoping the battery will run flat but it is not working. Pls help! I am desperate. Tx

    I have a 2010 Macbook Pro and am a very new user to Mac community only started to use this PC a few weeks ago.
    My Mac is just hanging and I am unable to shut it down or do anything at all.  I left it for 2.5 days hoping the battery will run flat but it is not working. Pls help! I am desperate. Tx

    In order to resolve the issue if it occurs again, more info would be helpful as to what occurred prior to the "hang." One potential fix would be to try a Safe Boot:
    After the Mac is completely shut down, push the power button and immediately after the startup tone, hold down the Shift key. The Shift key should be held as soon as possible after the startup tone but not before.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    There should be a message that says "SafeBoot." After the Mac is completely booted, try restarting and see if the issue is gone.

  • 3 out 4 isn't bad, the 4th one is shutting down

    I just got 4 822's Friday. 3 of them work fine, the 4th one is
    shutting down. So we have been doing the pull the battery routine.
    I called customer service on Sunday. They were very helpful,
    said we have to do a full software reload as the first step, if this does not
    work call us back and we will ship you a new phone. Very professional and I
    felt good after the call.
    I called today, because the software reload did not fix the
    issue. A different Verizon answered. The Verizon "customer service" I
    got today was up sale central. Can some logic be applied to your phone scripts?
    If I just upgraded everything 4 days ago, do you really think I want again so soon?
    Also if I am calling back on a repeat issue, do you feel I will be in the mood
    to listen to the sales pitch? After today's call, I am frustrated and concerned
    that there will be mistakes made in which phone I need replaced and if they
    made changes to my account.
    After saying no every way I know how, they finally decided to
    send me a replacement phone. Hopefully this one will be like the other 3.

    Try to ping 4.2.2.2 .
    If you get replies from the same number then try to ping yahoo.com and see if you get replies.
    If you get replies from 4.2.2.2 and not from yahoo.com then try to assign a static DNS address.
    Open network connections. Right click on wireless network connection and go to properties. Select internet protocol V4 TCP/IP and click on properties.
    Select the option ' Use the following DNS server addresses'. In the preferred DNS server type 192.168.1.1 and in the Alternate DNS server type 4.2.2.2. Click OK.

  • I have problem with this add-one "down them all" , Recently it doesn't show me Size of files !!

    I have problem with this add-one "down them all" , Recently it doesn't show me Size of files !!
    also regular download doesn't show my any thing !! and I can not even resume my files ....
    i know these are direct links and i should be able to resume my downloads any time ( i have this option before )

    If an extension isn't working properly then you need to take this up with its developer.
    *http://www.downthemall.net/

  • I've followed all the instructions in order to restore my ipod touch yet it won't even turn off or show the red slipper to shut down. I've tried holding down both buttons each at a time it doesn't do anything. Anybody ever experience this? If so help?

    I've followed all the instructions in order to restore my ipod touch yet it won't even turn off or show the red slipper to shut down. I've tried holding down both buttons each at a time it doesn't do anything. Anybody ever experience this? If so help? Should I just go to the apple store?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • V 3.6.13 - what has become of 'Restore previous session'? I've lost track of many topics in tags I had open when I had to shut down in advance of a power down by the electricity co. for day-long maintenence work in my area.

    # Question
    v 3.6.13 - what has become of 'Restore previous session'? I've lost track of many topics in tags I had open when I had to shut down in advance of a power down by the electricity co. for day-long maintenence work in my area. Being able to quickly close all tags, knowing one can recover them later is invaluable.

    See:
    * http://kb.mozillazine.org/Session_Restore

  • My battery dies quicker than before, even without using the phone .aslo it shuts down unxpectedly (sometimes shuts down at 30% then i cant restart it until i blog it to the charger) and sometimes jumps from 40% to 20% or from 20% to 3%

    hi!
    my battery dies quicker than before, even without using the phone
    aslo it shuts down unxpectedly (sometimes shuts down at 30% then i cant restart it until i blog it to the charger)
    and sometimes jumps from 40% to 20% or from 20% to 3%
    i have done many things people recommanded it for me like :
    restore : i've done two restores and it gets better for the first 1-2 weeks then it gets worse than before.
    also deleted my music list (19gb) in order to make this better (as recommended) but it still the same
    my screen brightness is always ALWAYS low , almost the lowest.
    i close the apps when i finish using them ALL OF THEM
    i dont use the camera and flash , almost rarely. just to save battery.
    i dont use the location service always.
    i dont charge my phone until it shuts down and i dont unblog it until it reachs 100%
    basically i have tried eveything.

    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.

  • Why can't I shut down my MacBook unless I hold down the power key?

    Hi all,
    I have had this problem my MacBook Pro using both Leopard and Jaguar. It is a problem when I shut down using either the drop down menu or by the power key menu. It appears to shut down but when I close the lid the "sleep" light comes on and is steady. It isn't actually shutting down because if I don't have the power charger plugged in it will run out of charge.
    So, to shut down, I hold the power key down for about 10 seconds.
    If it does fall asleep I am unable to awaken it (the sleep light is steady) and have to go through the holding down the power key procedure to shut it down and then use the power key to start it back up.
    Am I damaging it by doing this? I have tried the trouble shooting options as described in the manual. I had this problem before and one day it just wouldn't turn on and I had the hard drive replaced.
    Thank-you very much for any help!
    Becky Bell
    Sydney AUS
    Model Name: MacBook Pro 17"
    Model Identifier: MacBookPro1,2
    Processor Name: Intel Core Duo
    Processor Speed: 2.16 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 2 MB
    Memory: 1 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP12.0061.B03
    SMC Version: 1.5f10
    Serial Number: SystemSerialNumb
    Sudden Motion Sensor:
    State: Enabled

    I have found a solution on another thread that seems to have solved the problem for me. That is, I haven't experienced since, either the double password prompt at wake from sleep or the issue of not being able to shutdown.
    The solution requires deleting a preference file that apparently carried over from Tiger in the upgrade to Leopard and which is causing all the problems described. Preference files or .plist files hold configuration preferences and settings generally defined by the user for a particular operating system function. Deleting one of these files will result in the system recreating it on reboot with all settings set to default values, this is a simple way of fixing an incompatible/corrupt preference file.
    WARNING: Deleting preference files will reset all configurations for that files associated function. Custom user settings made in the +system preferences>Hardware>Energy Saver+ preference panel will have to be re-configured by the user.
    *_Step 1:_* Delete .plist files
    /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    /Library/Preferences/SystemConfiguration/com.apple.AutoWake.plist (may not be necessary, holds schedule details for the Energy Saver preferences)
    *_Step 2:_* Reset Parameter RAM
    +Resetting PRAM and NVRAM+
    1. +Shut down the computer.+
    2. +Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.+
    3. +Turn on the computer.+
    4. +Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.+
    5. +Hold the keys down until the computer restarts and you hear the startup sound for the second time.+
    6. +Release the keys.+

  • After a few minutes on safari it freezes everything i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

    everything freezes i can't even force quit i have to shut off by holding the power button down please help me with this. thanks

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I recently bought the 27" IMac. I have to force shut it down, the menu shut down doesn't work, and most of the time it will start back up on it's own several hours or even days later. Any ideas?

    I recently bought the 27" IMac. I have to force shut it down, the menu shut down doesn't work, and most of the time it will start back up on it's own several hours or even days later. Any ideas?

    Note: No iMac PPC is 27".   PPC is for the iMacs that were new until the beginning of 2006.   They are all Intel now.
    I've requested a moderator move your thread.  No action is needed on your part.

  • Imac won't shut down, blue screen with spinig wheel is on and computer never shuts until I hold the power button down and shut it manualy..

    Imac won't shut down,
    blue screen with spinig wheel is on and computer never shuts until I hold the power button down and shut it manualy..

    This is the instruction article for Intel-based Macs:
    http://support.apple.com/kb/HT3964
    Your profile does not indicate the type of Mac you are using.
    Barry

Maybe you are looking for