Shutting down when editing

Since upgrading to 2.1.3, aperture shuts down completely when i click on the "adjustments" section, then the pulldowns (one is the gear wheel, the other is the +). i just want to use the vignettes and/or the sepia and it won't even highlight it for me to click before shutting down. it is infuriating as i am editing photos for a client.
please help!

Make sure Aperture is not open, then after first backing up, try deleting the "AdjustmentPresets.plist" file in your Users/<username>/Library/Application Support/Aperture
Failing that, just backup the entire directory of Users/<username>/Library/Application Support/Aperture someplace else, then delete it. This will get Aperture running without all your customizations, then you can (with Aperture closed) add back the files slowly from your backup to add your customizations back (if any). Do this slowly so you'll be able to know which file is corrupt and not use.

Similar Messages

  • Adobe photoshop album starter edition 3.0 shutting down when importing from iphone 4

    adobe photoshop album starter edition 3.0 keeps shutting down when I try to import photos from my iphone 4 - it works fine with my wife's iphone 3!  Any suggestions?
    The follwoing messages appear:
    Adobe Photoshop Album Starter Edition 3.0 (Viewer) has encountered a problem and needs to close.  We are sorry for the inconvenience.
    AppName: componentlauncher.exe AppVer: 3.0.0.49815 ModName: ntdll.dll
    ModVer: 5.1.2600.5755 Offset: 00010a19
    Many thanks!

    Welcome to the forum.
    Unfortunately, you have posted to the Photoshop Windows forum, which deals with issues on the full Photoshop program. You want to post to the Photoshop Album Starter Edition Forum (a different software).
    Good luck,
    Hunt

  • ICal shuts down when I edit an entry, without taking the edit

    Since installing Leopard on my Macbook, I have had a whole list of problems. Here's one: iCal shuts down when I edit an entry. In particular, I'm trying to remove an alarm from a recurring event. I click "none" and then before I can click "done" the whole program shuts down.
    Help!

    I am still using OS X 10.4.10. Since this weekend I ma unable to do anything with ICAL. As soon as I try to make a change, it crashes. I have tried reinstalling, etc. Any suggestions?

  • My iphone keeps shutting down when i try to edit a picture

    My iPhone keeps shutting down when I try to edit a picture.

    Submit a bug report at http://apple.com/feedback/iphone.html

  • Acrobat 8 shuts down when clicking "Edit"..."Preferences"

    Update 8.2.0 made it impossible print pdf so I reinstalled Acrobat 8, and it solved that problem. But now the program shuts down when I choose "Edit"..."Preferences"
    Is there anyone who have encountered this issue and hopefully have a solution for it?
    /Magnus

    Uninstall, use the Microsoft Installer Cleanup tool, then re-install.

  • Palm Desktop shuts down when trying to view calendar by month

    I'm using a Palm TX with the latest edition of Desktop installed (I think that's 6.2).  Everything is normal except, suddenly, I cannot view my calendar in monthly view.   Daily, weekly and yearly all work fine.  Desktop shuts down when trying to view in monthly view.  I did a system restart, a Desktop reinstallation, a download of the latest version and installation of that version and, finally, uninstallment of the existing Desktop, download of the newest version and installation of that version.  Nothing seems to enable me to view the calendar in monthly view.  This is a spontaneous event.  I've been running Desktop on a Vista Ultimate system since February without incident.  I have no idea about how to solve this.
    Thanks
    Post relates to: Palm TX

    Well, here's where we are now.  It's a good thing that I have desktop on my office computer because when I tried a Hotsynch with my home desktop, Hotsynch wiped out all the data on my handheld and then hung up both the handheld and desktop in the middle of the Hotsynch.  I'm going to overwrite the entire handheld with the office desktop file.  As for the home setup, I'm thinking the only thing I can do now is uninstall Palm and wipe out the entire directory of files.  Am I correct about this?  Do I need to do a clean uninstall?
    Post relates to: Palm TX

  • ITunes keeps shutting down when I open it up.  The message says iTunes has stopped working.  A problem has caused the program to stop working correctly.  Windows will close the program and notify you if a solutions is found.

    iTunes keeps shutting down when I open it up.  The message says iTunes has stopped working.  A problem has caused the program to stop working correctly.  Windows will close the program and notify you if a solutions is found.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried something like the above then try opening iTunes in safe mode (press and hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud Purchases. You may find that iTunes opens normally now.
    tt2

  • ITunes shuts down when I plug in my iPod

    I've used my iPod without a problem since Christmas. For the past week, when I plug in my iPod, iTunes shuts down due to an unnamed error.
    I have reinstalled all my USB drivers, removed all of my Apple software twice and reinstalled it twice (once with the guidance of an Apple tech via phone). The Apple tech guy sent me to the Apple store to replace my iPod, which I did. But none of that has fixed the problem.
    So now, I'm left with an empty iPod that can't sync with my library because iTunes keeps shutting down when I plug in the iPod. The people at the Apple store said they couldn't help me further because I have a PC. The people at Microsoft won't take any responsibility because iTunes is an Apple product. So, I'm left with a $200 iPod that is suddenly for some unexplained reason, shutting down iTunes. So now, both the iPod and iTunes are worthless.
    Does anybody know how to fix this problem? I'm a singer and depend upon my iPod for rehearsal, so I need it fixed ASAP. Any help would be much appreciated.
    Message was edited by: WhyWon'tThisAcceptMyName?

    Sorry I wasn't very clear the first time. Changing the Drive Letter is done through Disk Management in Windows. I suggested you open the itunes preferences in hopes that you would then be able to connect your ipod without it crashing.
    To change the drive letter:
    Since we know this trick works
    First open itunes, then select Edit-Preferences and leave this open.
    Then, follow the steps [here|http://support.apple.com/kb/TS1493]
    I use Q, R and T for my ipods so the computer doesn't confuse it with other removable devices.
    Message was edited by: hmacross

  • Why does my Safari shut down when loading a page?

    Why does my Safari shut down when I'm trying to load a page?

    Is this for a Mac? You posted in the Beta for Windows section, you might want to try the Beta for Mac pages instead and see if anyone there know a good fix. Is this just with Adobe's PDF reader, or with Preview too? A workaround could simply be switching to a different reader, if you simply cannot find what causes the crashes. A clean reinstall might do the trick, if you haven't done so already.
    If this is on Windows than I would recommend downloading the PDF plugin from http://www.apple.com/safari/download/plugins.html
    Message was edited by:  Andy

  • MacBook shuts down when not connected to power supply

    Hey everyone, I'm making this topic for an issue that has gotten me edgy lately.
    My MacBook (not new) has a habit on shutting down on me instantly for some reason when the MacBook is not plugged into charge. Here is the strange thing though, if I unplug the charger plug and set it still on my desk, I have more of a chance of the laptop not failing on me, but when I carry the MacBook around, it has a 90% (guestimate) chance of shutting down on me.
    Even after having the laptop plugged in for 12 hours, the laptop just goes into suspend mode.
    I have to wait a couple of seconds before I can turn it back on (by pressing the power button, not any key).
    Also, when I shut down more programs at certain times when not plugged in, and having the screen brightness low, the Mac does not shut down so fast.
    Any advice?!
    Thanks
    Message was edited by: Biz Bizzle

    Could be you battery. Mine shuts down when showing 40% charge left and I have to plug it into the power supply to fix it. I found out it was the battery by downloading coconut battery. It's an application that allows you to check the status of your battery (Link at bottom). I suggest you get that and when your macbook shuts down again, plug it into the mains, start it up and run coconut battery. If it shows your nearly out of battery power then that's your problem.
    I was showing 40% left when it shut down. Did the above and I had no power left. It happens when the battery is old about 250-400 loadcycles
    Hope this helps.
    http://www.coconut-flavour.com/coconutbattery/index.html

  • IPhone shuts down when phoning

    Hello,
    when the battery goes to about 50%, my iPhone shuts down when I make a call (or receive) one. When I turn it on again (without charger) and try to make another call, it shuts down again There is no low battery warning!
    But I can use it for hours surfing the internet (WIFI or EDGE), playing music etc. I also tried to use (internet & music) it, till it shuts down and charge it for at least 6 hours. This doesn't help as well.
    Can I do anything else or do I have to replace it?
    Firmware is the latest 1.1.1
    Best regards
    René
    Message was edited by: Rene Scrubei

    Sorry to hear you are having so much trouble.
    2 things to do before you seek service.
    1. Reboot the iPhone on your own. Hold down the button on the top and wait until you get the red bar telling you to slide to turn it off. Power down, reboot and see if the problem persists.
    2. If that doesn't work, Reset iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
    3. Final option is to restore the iPhone in iTunes. You'll lose some data, but if you back up first, you'll obviously be ok.
    An Apple genius will ask if you have tried these steps before proceeding. Good luck.

  • Iphoto keeps shutting down when making a book

    Iphoto just keeps shutting down when I am trying to make a book. Every time it shuts down, it erases most of the content of my book. Help!

    birdiemac:
    Welcome to the Apple Discussions. Where in the process does it shut down? When you try to drag a photo into the book or into a page?
    If it's when trying to add a photo, can you edit that photo without crashing and do you use Photoshop Elements or Photoshop for any of your editing?
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application, iPhoto dB file backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar

  • IP4 AUTO-SHUT DOWN WHEN CONNECTING TO WI-FI

    Hi, fellow apple users, my name is ace, I'm from the phillippines. I ordered my Iphone from singapore, using a singapore address of a friend of mine and have it shipped there then delivered to me through Singpost here in the Philippines.
    I Noticed that my Iphone 4 Automatically shut-down when it connects to a wi-fi or internet sharing while i'm in the office. Was this normal or there was a problem with my phone, Here is the serial number: 830**0A4T
    <Edited by Host>

    HI Ace,
    Try here: Troubleshooting iPhone Hardware
    Click: Connectivity / Network: Wi Fi issues
    Carolyn

  • Itunes shuts down when clicking anything

    My iTunes shuts down when I click anything on the screen other than the music. If I click anything on the sidebar (Store, Playlists, Library, etc.) or the album artwork it shuts down. I have tried pulling all the iTunes preferences out of the library and restarting the computer. This does not fix the problem. This has been going on for a few months, but I have been downloading the newest versions of iTunes and it continues to happen.

    Hey chaimoy,
    It seems like you may be experiencing an unexpected quit from iTunes when importing a file into the iTunes library. I have an article for you that addresses this circumstance, and it can be found below:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    http://support.apple.com/en-us/HT203206
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • My Satellite laptop (A305) shuts down when run on the AC charger/adapter

    The problem is that my Toshiba _A300 series laptop (A305) shuts down when you try to run it on the AC charger/adapter_. You can boot it with the power cord plugged in and it will get to Windows Desktop and maybe a few minutes more at most before shutting off.
    It will boot and _run from battery without problem_, but if you plug in the AC while it is up and running on battery the machine will normally click off instantly and reboot to the message "Windows was not shut down correctly."
    The _AC adapter works fine_ reading a steady 19.19 to 19.20 volts with a voltmeter. It also _charges the battery fine when the computer is off_. I have two Toshiba brand batteries and they both work fine.
    One interesting thing is that the _computer runs fine on AC when in safe mode_.
    I _did a reformat/factory restore_ of Vista to assure it was not software and drivers, and still got the same problem before any external devices had been plugged in.
    It has the latest BIOS and I tried resetting it to default values in case anything had gotten changed. It made no difference.
    This is _not a heating issue_ because _while it is run on battery I can watch long videos_ without it shutting off. I ran compressed air through the vents just to make sure, but it makes no difference in behavior. Usually with an overheating shut-off, the computer cannot be started until it has cooled some, but these shutdowns are accompanied by an instant reboot.
    I have seen on some threads that this type of problem one can work around by disabling one of the processors in Device Manager, but I don't think that is much of a lasting solution or good for the computer.
    Has anyone seen this problem before and have you come with a full diagnosis of the problem and a real solution?

    I have Satellite A300 and until now everything works OK.
    I would like to know what happen when you remove the battery and use notebook with power supply only. Does notebook shuts down again.
    If not let OS run and put the battery.
    Is the battery recognized properly? Does notebook switch off again?
    To be honest I cannot imagine this issue has something with software or background processes. Recovery image you got with your notebook is designed for this certain notebook mode. Recovery image is tested and I dont think preinstalled OS has anything to do with this.
    Full diagnosis?
    And how to do this? You know very well that diagnosis can be done with diagnostic tools only and such tools have services only. I hope you will find answers but Im 99% sure there is nothing you can do about that. Maybe you should contact service, explain the situation and ask for help.

Maybe you are looking for

  • Date range validity evaluation in BRM table

    Lectori salutem, Gurus salutem, I'm using 7.3 sp03. I would like to achieve the following with BRM (bit simplified): a parameter, ABC, is passed to a ruleSetService, and needs to be evaluated. The table is as follows: ABC startDate endDate Value 1 01

  • Stock Transport Order Setup

    Hi I have to setup Stock transport order between plants in same company code through inventory route (by 351 movement). Kindly guide me for the 1.Standard customizing and master data setup required for the same. 2. Any additional Customizing &  Maste

  • [CX] Unable to view Smart Lists on Data Forms

    Hello All! I've created and deployed CAPEX Planning Application using BPMA. Deploy and Initialize CAPEX Planning Application was successfull. But I can not view any smart lists on data forms - there are only usual cells, where I can insert data. I've

  • Can I seperate the icon images

    In the JNLP file you can specify 3 icon images for 3 different sizes, 64 * 64, 32 * 32 and 16 * 16 pixels. <icon href="iconStartMenuSize.jpeg" width=16 height=16/> <icon href="iconDesktopSize.jpeg" width=32 height=32/> <icon href="iconSplashScreenSiz

  • View resizing in IB

    I'm having trouble visualizing something. Let say I have three views inside a scrollview with some other content. Top, buttons and image. buttons and image are both inside top. Top does NOT fill up the scrollview, however, buttons and image DO fill u