Shuttle Express jog wheel

Hello there,
I would like to use my +contour design+ Shuttle Express for controlling Logic 8.
But the factory settings for the jog wheel, don't work for jog or scrub.
Does somebody knows how to set the parameters of the jog wheel, to use it for scrubbing audio ?
Or can somebody post his parameters, or settings ?
Thank you

Hi Janak,
So I thought of a decent way to do it using an event structure.  I have posted the code and it uses graph instead of a chart.  I hope it helps.
Brian K.
Attachments:
mechanic.vi ‏18 KB

Similar Messages

  • Where are the shuttle and jog in Pro 6?

    Where can I find yhe shuttle slider and jog wheel in Premiere pro 6?
    In the source panel it's okay to move with the arrows but in the programpanel it goes way to slow!
    How do I fast foreward???

    Wib,
    Are you referring to the Zoom Scroll bar and the drag head?
    Reference: http://helpx.adobe.com/content/help/en/premiere-pro/using/source-monitor-program-monitor.h tml

  • Jog Wheel on Front Panel

    I am searching for  a Jog wheel /knob of sorts for controlling user input of time/frequency on the front panel.
    What I would like to do is akin to the Jog wheel that we use on ham radio stations to change frequencies/channels etc. Essentially, you can use the same wheel to turn in 0.1 Hz increments, 1 Hz increments ....and even in 1MHz increments.
    We need to look at a large amount of waveform data, and I want to have the functionality of moving forward, or backward in time to see different results.
    Currently, we use Labview Professional Development System 8.0.1.
    Appreciate your help!!
    ~Janak
    Message Edited by mechanical13 on 04-25-2007 10:24 AM

    Hi Janak,
    So I thought of a decent way to do it using an event structure.  I have posted the code and it uses graph instead of a chart.  I hope it helps.
    Brian K.
    Attachments:
    mechanic.vi ‏18 KB

  • Emagic Logic Control jog wheel...

    My logic control is was working fine; and then poof - No v pots and no jog wheel - mackie suggested i delete a preferences file; which has bought my v pots back to life...However the jog wheel and the timeline still misbehave...
    The line skips back and forth between a couple of bars...and moves forwards jumping backswards and forwards if i spin the wheel really quickly...if, when the line is further into the track i move the jog normal scrolling pace it runs the line backwards towards zero; speed it up and it jumps all over the place.
    I rang apple but the wanted to charge me £144.99 for phone advise - so im begging someone here to help me if you can...
    Many thanks Dave

    its not showing in my audio midi set up - but never has previously...but the device it connects via does show up - From what was said in the quick start guide, you only have to add it as a control surface within logic...Where logic already has the relevant driver; waiting to be selected from a list...As for updating anything; I havn't touched a thing. It was literally a case of one day, everything worked; the next day it didn't - mackie said logic had made a corrupt preference file (user/whatever your user nameis/library/preferences/logic) that their would be a file named should be something like
    (Com.apple.logic.pro.CS) which there was, and to drag the file to the trash then restart the
    computer...This did work to an extent; the 'v-pot' part of the control which had stopped working came back to life and everything now works fine...accept the jog/timeline issue...
    I have added it in Audio Midi set up...in the hope that it will help - What properties should I set it to have? anything special - Appologies for seeming dense, I just make music; normally things just seem to have worked! And my technical knowledge is somewhat lacking im affraid.
    Thanks for your help - it really is appriciated
    Dave

  • Logic Control Jog Wheel Erratic in 7.1.1, OK in 6.4.3

    Rotating the Jog Wheel clockwise causes the SPL to leap to bar 13, 66, 201 and rotating counter-clockwise allows no rewind function except return to zero. I have re-initialized everything including key commands, even re-installing Logic Pro 7.1 and updating to 7.1.1 and no difference. The Logic Control continues to work perfectly under Logic Pro 6.4.3, so this is specifically related to Logic Pro 7 Can anyone offer any help?

    Anybody know anything about this??

  • Shuttle jog wheel to control song position

    How do I make a Countour A/V Shuttle XPress USB jog the Logic song position bar ?

    The easiest way to control this is to drag the music track in and drop it on the clip where you want it to start. This way, it will show up as a track beneath the video clips. If you drag it in as background, it will fill up all the space, so you have less control.
    This video tutorial should help.
    http://www.apple.com/findouthow/movies/imovie08.html#audioclips

  • How to shuttle though mouse wheel

    Hi folks,
    I have a trachball mouse with a touch mouse scroll wheel. I was wondering if there is a way to program shuttle so that I can use the scroller's sesitivity to shuttle. Here is more info on my mouse, I am usin CS5.5
    http://www.kensington.com/kensington/us/us/p/1444/K72352US/orbit%E2%84%A2-wireless-mobile- trackball.aspx
    Thanks!

    Hi folks,
    I have a trachball mouse with a touch mouse scroll wheel. I was wondering if there is a way to program shuttle so that I can use the scroller's sesitivity to shuttle. Here is more info on my mouse, I am usin CS5.5
    http://www.kensington.com/kensington/us/us/p/1444/K72352US/orbit%E2%84%A2-wireless-mobile- trackball.aspx
    Thanks!

  • Can anyone get the mackie jog wheel to work with adobe audition 3?

    I can get the 'scrub' wheel to work in play mode...but not in stop mode..to make fine adjustments.
    I read elsewhere that the mackie wheel simply doesnt work with adobe.
    has anyone found that to be untrue?

    Hi Cornelius,
    At the top right corner of the Sequencer is a button that will let you select which MIDI controller devices you wish to enable. You can then select the channel this device is listening on from the MIDI IN dropdown on the track that hosts your VSTi. (The MIDI IN selection is an arrow pointing to the right.) For testing purposes, it may be simplest to select ALL for now.
    You should then be able to use your controller to trigger and control the VSTi on that track.
    If I've misunderstood your question, please elaborate.
    Durin

  • MCU and Logic 8.02 - no jog/shuttle wheel

    this is really bugging me as a I use the jog wheel a lot. When using Logic 8.02 the jog wheel on my Mackie Control Universal (MCU) does not function correctly. Instead of advancing by say a bar every click the logic song position advances to the end of the arrangement - it only sometimes goes backwards and that is in increments of around 80 bars.
    I have reset the key commands and deleted and re added the MCU as well as initializing all preferences - the problem persists.
    What is really odd about this to me is the the jog wheel does not appear to be properly mapped in logic's key commands - the shuttle command is mapped to the fast forward and rewind keys! fast forward and rewind do work. All other funtions of the MCU function normally.
    anyone else experiencing this? any idea on how I can get around this?
    Logic 8.02, OS X 10.4.11 - MCU v2.1.0, MIDI interface for the MCU is MOTU 828mk2 FW, MIDI interface for everything else is Unitor8

    I tried putting it into HUI mode and the jog wheel was still acting strange. Perhaps my control surface is broken?
    When I have time I will test on an older version of Logic that I know used to work.

  • Are shuttle/jog type inputs devices helpful?

    I remember the good ole days editing on VHS tape. A shuttle/jog wheel was worth it's weight in gold.
    Are these still useful? Any particular ones?

    I bought a while ago a Shuttle Pro...
    .. which, imho, is a useful tool... you can set the many buttons to any action indivually, but foremost, that 'analog ff/rew' is an excellent feature..
    I'm very much right-hand orientated, so, I'm moving the mouse with right, but my left hand can easiely scroll, set in- and out-points etc (I'm using the device for FCE too.....)
    site seems to be down...:
    http://www.contourdesign.com/shuttlepro/

  • Shuttle Exress Topics & Help

    Hi all,
    I'd like to open up a Contour Shuttle Express thread. The last known one is archived.
    I recently purchased one new. Loaded the software from an update online and I can't seem to get it to work. Logic Pro 8.
    My first and formost request is how do I get the jog wheel and the FF REW to work?
    Thanks.
    -scan

    D1 is a BIOS Boot Block Initialization checkpoints and is defined as such:
    Quote
    Early super I/O initialization is done including RTC and keyboard controller. Serial port is enabled at this point if needed for debugging. NMI is disabled. Perform keyboard controller BAT test. Save power-on CPUID value in scratch CMOS. Go to flat mode with 4GB limit and GA20 enabled.
    This happens before the actual memory initialization or video card initialization.  For now we can conclude, that those are not the problem.  As it looks, the issue is processor or chipset related.
    - Did you properly connect the +12V CPU power connector to the mainboard (4/8 pin)?
    - Did you unplug the PSU from A/C power and >>Clear CMOS<<?
    In case a CMOS Clear does not change the situation, please take off the CPU again and check for broken/missing or bent pins.  Also, test the board outside the case on a non-conducting surface in barebone configuration.

  • Extra keypad to make keyboard shortcuts easier?   Shuttle Pro v.2?

    Hi all,
    I like the white keyboard that came with my Mac Pro except for the fact the F keys are all squished together. I like how PC keyboards group the F keys in groups of 4. Even with the F keys grouped are not that easy for me to use. I also have a Logitech Internet Navigator keyboard that has media keys along the top. I am visually impaired so I do touch typing and don't look at the keyboard. In fact, I keep the keyboard tray recessed under the desk while I am typing. I am currently using the Mac Pro keyboard with my Mac Pro. I haven't tried using the Logitech keyboard with the Mac Pro.
    I'm trying to make it easier to access shortcut keys. I don't really like redefining keyboard keystrokes because I don't know if I am overriding an existing keyboard shutcut. So, a better keyboard shortcut manager would be nice that showed me applications use which shortcut keys. Does such software exist for the mac? Could such programs learn the shortcuts used by newly installed applications?
    Also, I think it would be handy to have an external keypad that I can assign shortcuts to. I would want some shortcuts to be global and some to be local to certain apps. Also, I want to be able to use the main keyboard's modifier keys. At least one jog wheel would be nice too. The Shuttle Pro V.2 looks like a possibility but I can find very many articles about it for general use. Most of the articles refer to it being used with pro apps. Anyone care to share their experience with this?
    BTW, I use a Logitech TrackMan Marble+ trackball instead of the Mighty Mouse.
    I'd appreciate any other suggestions such as keyboards or extra keypads.
    Thanks!
    Steven

    I would expect one to be able to add a shortcut to this specific command in FCP X's command editor, but like you I can't seem to find it there.
    I can offer two suggestions:
    1) If you use Save Current Frame more than any other export option, you can easily attach to it the default Cmd-E.
    Open Preferences->Destinations, control-click on "Save Current Frame" in the left pane and choose "make default".
    2) You can use the system keyboard shortcuts to assign an appropriate shortcut to "Save Current Frame...".
    Open System Preferences->Keyboard->Shortcuts. Click on "App Shortcuts", then click the "+" button to add a new one. Select Final Cut Pro as the application, enter the text of the menu command *exactly* - "Save Current Frame..." without the quotes - then click the box for the shortcut and enter the desired one. I tested this with Cmd-Control-Option-Shift S and it worked immediately (not even needed to quit FCP X).

  • Contour shuttle express_fcp controller

    does anyone know how to set up the contour shuttle express to control the jog controll & shuttle control in fcp
    or how to control the jog & shuttle via logitech mx revolution

    Hi
    If I google "contour shuttle express fcp"
    then i get this [PDF|http://www.tomeso.de/data/tomeso/media/doc/FinalCutReadMe.pdf] as the first hit.
    Doesn't that work for you?
    Then maybe you could phrase your question some more descriptive...

  • IMovie set up for Contour Shuttle Pro 2

    I have a Contour Shuttle Pro 2 and am trying to get it set up for use with IMovie 9. I cannot find anywhere in the Contour or iMovie support sites on how to set it up. Anyone have any suggestions?

    Ken Gresko wrote:
    I have a Contour Shuttle Pro 2 and am trying to get it set up for use with IMovie 9. I cannot find anywhere in the Contour or iMovie support sites on how to set it up. ..
    never looked for a 'ready-made' set-up, but made my own one..
    Uploaded with Skitch!
    • launch the ShuttlePro Preference (on my Mac, there's a tiny icon in the menu-bar/'Shuttle Setting'.
    • create a New one
    • now apply your 'commands', e.g. turning the jog-wheel to the right = 'cursor right, 1 step' ..
    • repeat for other keys and commands ..
    iMovie doesn't offer as much key-combos as a professional editor as FC/e ..

  • Using Logic X-Mod Wheel not being received.

    Im having an issue with the mod wheel info on passing to Logic X. Its not m¥ controller because it works in Pro Tools.
    Odd ly if I assign another controller with the same CC number , Mod. info can be recorded ( but not from the Mod wheel )
    Thansk, GF

    Not sure exactly how this happened but there was one command called Jog Wheel. I removed that and the Mod Wheel started working.Thanks ErikSimon as this was found in the Controller Assignment window.
    GF

Maybe you are looking for

  • G/L account item without tax code in document with deferred taxes

    Hi , While releasing the billing document to accounting i get this error " G/L account item without tax code in document with deferred taxes". Not able to release it to accounts. What could be the possible reason?? Actually, this error is occuring on

  • Bashrc colors not working in CLI mode

    i have been running an arch web server in virtualbox and i have it set to only use runlevel 3, no gui at all. i set colors in my ~/.bashrc file according to the wiki and i dont get the color. i have it setup for a different color if i connect via SSH

  • Images Showing Up In Posts?

    i know this isnt java but its about the forum :). how do i make an image show up in my post instead of giving a link to it? thnx thnx

  • Can't import bookmarks from Safari - folder empty

    Can't import Safari bookmarks -- folder is empty. Working on iMac flat-panel PPC OS X 10.4.11; Safari v4.1 -- Firefox v3.6.6 (just upgraded! sucks.)

  • Xml form and Approval workflow/process

    Hi , I have created an xml form template and I have to integrate with Approval process .. My requirement is something like this .... After the content created using the xmlform template by the content generator(role). It should go to the Approver(rol