Shuttle header not generated if on seperate page

I see that the header tag has not been included in the shuttleGroup template, only the shuttleChildGroup template. Since this is using a non-mandatory parameter within the Application Structure file anyway, was their a specific reason for not including it ? Are there any plans to make the shuttle templates consistent ? If I wanted to amend the shuttleGroup template permanently for my JHeadstart installation , rather than updating the template for each new application, how would I go about doing that ?
Cheers,
Brent

Brent,
There was no specific reason for not including this header. I will log an enhancement request to include it in a next release.
If you want to change the shuttleGroup.jut for each new application, you can put the new template in JAGLauncher.jar (using a Zip tool), without any folder path.
Hope this helps,
Sandra Muller
JHeadstart Team
Oracle Consulting

Similar Messages

Table Header not getting repeated in subsequent pages

Hi,
I have a table and i want to table header to be repeated in subsequent pages but only till 2nd page the table header is repeated from the 3rd page onwards the table header is not repeated.
I have selected the Header Row in hierarchy and in Pagination tab for the header row i have checked the the check box Insert Header Row in Subsequent Pages.
After selecting the checkbox also table header is repeated only in 2 pages and not repeated after the second page.
My table hierarchy in form is :
TableSubform
---Table
HeaderRow
Row1
I am using Designer 8.0 and Acrobat Reader 8.1.2
Can you please help me in solving this issue.
Regards,
Bala Baskaran.s

Hi All,
I have selected the the check box Insert Header Row in Subsequent Pages then also the header is not getting flowed in subsequent pages only till 2nd page its getting flowed.
I have used table wizard to create table and i have made the table subform as flowed then also table header is not repeating in subsequent pages.
MainForm (Flowed)
TableSubform1(Flowed)
Table1
HeaderRow
Row1
TableSubform2(Flowed)
Table2
HeaderRow
Row1
I selected TableSubform1 and in Pagination tab OverFlow Leader dropdown i selected HeaderRow, the same i did for TableSubform2 also but the table header is not getting repeated in subsequent pages.
Please help me in solving this problem.
Regards,
Bala Baskaran.S

Page Header Not Displaying at Top of Page

Report Builder 3
We have a number of reports that include navigation links in the page header. The links use the Bookmarks Action to move the user to a different page. The pages are separated using Page Breaks. Below is an example:
> Top row is the Page Header.
> Second section is the Resource Listing & Alerts page.
> After the first page a rectangle is placed which has Page Break set to Start.
> After the rectangle comes the start of the "Data Extract" page. The title is in a rectangle with a Bookmark called Page2.
> Click the link to be forwarded to the Data Extract.
> Page displays, but the Page Header is not visible because the screen is scrolled down slightly.
I have not been able to fix this or find a workaround that forces the Page Header to always display at the top. It has been suggested that putting the page break before the bookmark would force this to work, but that is not working.
Any ideas? Thank you! Naamkeek

Hi Naamkeek,
Based on my understanding, you add a bookmark link for “Data Extract” in page header, however, when clicking this fields, other page displays without visible page header.
In Reporting Service, when setting page header in a report, the page header will display in each report page. In your scenario, since you set BreakLocation as Start in PageBreak property, the rectangle could make the page header upper and screen scroll down
lightly. So please change this property to End. As we tested in our environment, we set BreakLocation as End in PageBreak property for the blank rectangle. Then adding a bookmark link in page header, when we click “Data Extract”, the page header will appear
on a new page. Please refer to screenshots below:
Reference:
Page Headers and Footers (Report Builder and SSRS)
Best regards,
Qiuyun Yu

Report9i not generating more then 50852 pages in PDF format

Hi,
I have Oracle Report 9i (9.0.2.3) version with patchset 3.
I am facing problem of generating PDF file which has more than 50K pages.
It is generating if 50,000 page only but if pages more than 50852 then its not generating PDF.
If any one has any idea about it, please let me know.
regards,
Nitin.

Hi All,
Thanks for your prompt replay.
Now i have installed Oracle 9i Report version 9.0.4.0.33 and i am still not able to generated PDF file above 55K pages.
I am not going to print this file . report is going to generate this file for future use. My target is generating PDF file about 200K pages. Its my requirement from Client.
Now in Newer version after 55K pages its start again for page 1 and after generating some pages its getting terminated report and nothing generated.
I have checked in cache of report folder its generating file there but not able to complete report.
PLease help me on this
regards
Nitin PAtel

Page Header Not at Top of Bookmarked Page

Using Report Builder 3.0
I have a large multipage report that has a Report Header which includes "tabs". The tabs are links to Bookmarked pages. I need the Report Header to display at the top of each page when a tab is clicked. To understand the structure please look at
the attachment.
Current Behavior:
Report correctly opens with Header displayed at top of Page1.
Click Page1 tab. No change--correct.
Click Page2 tab. Page2 displays with Header visible at top. Correct, but I don't know why. Clicking to advance pages in this section gets a correct result.
Click Page3 tab. Page3 displays. Header is there, but not visible because the page is scrolled down to what is probably the Bookmark.
All other tabs are the same as Page3.
Desired Behavior:
Same as Page2 above. When a tab is clicked the new page displays with the Page Header visible at the top.
I've wondered if this is possible with Bookmarks. I tried to come up with a URL that would work, but couldn't get the syntax correct. I also tried putting a Document Map in place--interestingly the exact same behavior as above occurs.
Can anyone help me? Thanks!

Hi Naamakeek,
According to your description, you want to have your "tabs" displayed after you click it and jump to the bookmark. Right?
In Reporting Services, when we set a bookmark and do a jump to bookmark action, it supposed to navigate to where the bookmark is. This is the default behavior and we can't change it. So it happens on Page 3 and other tabs. In this scenario,
we guess you have set the textbox ("tabs") repeat with your tablix, and the position of the first two bookmark are close to header, so that you can see the header in your first two pages. So for your requirement, it might not be achieved currently. Since
we can't see the screenshot of report structure, please re-post it if possible. It may help us make some adjustment and improvement for you. Thank you.
Reference:
Add a Bookmark to a Report (Report Builder and SSRS)
Best Regards,
Simon Hou

ODI - IKM SQL to File Append - Header not Generated

I'm using ODI IKM SQL to File Append to create a text file, but the header is not being generated. And the GENERATE_HEADER is set to Yes. The file is Tab delimited and the Heading (number of lines) is set to 1.
Seems to only be an issue with HFM files coming from the Unix server.
Any suggestions?
Thanks, Mike

Ok, getting the following error in step 6 - Integration - HFM_EA_Translate - Insert Column Headers
java.lang.NumberFormatException
     at java.math.BigDecimal.<init>(BigDecimal.java:459)
     at java.math.BigDecimal.<init>(BigDecimal.java:728)
     at com.sunopsis.sql.SnpsQuery.updateExecStatement(SnpsQuery.java)
     at com.sunopsis.sql.SnpsQuery.addBatch(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execCollOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:662)
The last two columns in the file are numeric which seems to be causing the issue. Will change formatting for the two columns (String, Numeric, etc.) to see if I can resolve the header issue.
Thanks,
Mike

CP5-Slide Notes generate 100's of pages and hose PC

Using CP5 in TCS3.
I created slides notes for my CP project. I clicked Publish and selected Print, and selected an export range of All, Handouts type, and 2 slides per page.
It seems to create a Word document, but I should have 12 pages for 24 slides. Instead I get only 3 and Word locks up. Occasionally, I will just let the Word document sit there and it will display 1 of some outrageous number (it can range from several hundred to several thousand).
Any ideas what would cause this. It worked fine the first few times I generated, but just recently (after an update) it started to act up.
Thanks in advance.

Hi,
Which operating system are you using and what is the version of Microsoft word?
Thanks,
Vikranth.

How to create Chart within a web page NOT as seperate page?

Hi, I am using JCharts and am trying to figure out how (or if it is even possible) to create a chart and then place it in a web page. All the examples I've seen show you how to create a JPEG of the chart and then link to this image from your web page. Is it not possible to surround the JPEG chart with other HTML so that I can keep my web page logo and menu etc on the same page as the chart?
I can't find any examples which show how to surround your images with HTML as JCharts creates a JPG file and returns that in the Http Response e.g. "ServletEncoderHelper.encodeJPEG13(axisChart, 1.0f, response);".
My environment is Java 1.4.2, Struts and Tomcat 4.1.30.
Is there a way of drawing charts directly into a web page rather than displaying them on a seperate page as an image file?
many thanks in advance,
James.

Hi Hatton,
in html, there exists an img-tag. this tag contains a parameter called src. And if you want to embedd an image in your html-page, you will put the source of the image you want to display to the src-parameter. The same with servlets or java server pages. For the browser it doesn't matter where the html comes from. it doesn't matter if it has to be generated by an servlet-container like tomcat. So you write a servlet, which will create an image and make it accessible to your servlet container and then insert an tag like
<html>
<body>
<img src="http://yourdomain/servlet?param=value" width=aNumber height=aNumber>
</body>
</html>This can be done because servlets can be configured to response with images which can be created by java2d or something else...
I hope, this will help you...

Header not getting displayed in the next page in the second table

Dear Experts ,
I have a query regarding Header not getting displayed in the next page in the second table of the main window. .Let me elobrate the issue.
I have a smartform in which there are 2 tables TABLE 1 and TABLE 2 in the smartform MAIN window. TABLE 1 is for pending PO and TABLE 2 is for future delivery date P O separated by text in between.
Now the header for both the tables and the data are getting displayed properly if the total output is in only one page. But If there are more entries in the TABLE 1 the Header for the TABLE 2 is not getting displayed. Header for TABLE 1 yet gets displayed properly in the next page in case of more entries.
Only issue is that Header for TABLE 2 is not getting displayed in second page but it gets displayed if the entries are less in TABLE 1 and the total output is in one page .
Please provide a elobrate solution on this problem as the requirement is urgent.
Thanks,
Regards,
Sachin Hada

Hi Sachin,
you need to cteate two pages FIRST and NEXT.
in first page --> FIRST
next --> NEXT
in next page
page---> NEXT
next ---> NEXT.
you copy the first page main window is the same in next page
aslo
I think help ful for you
thanks & Regards
BHUPAL.

Header and Footer in not displaying correctly on each page in Adobe Forms

Hi experts,
   I need your little help on Adobe Form. I have develop a customer account statement and facing problem.
     In header and footer part I have to display customer address. It is ok if data is of one page. But when data is overflowing, customer address is showing only at first page in header, and not displaying address neither in header nor in footer(footer section will print on last page, it may be either first page or third page ) on other pages. (Address is table type data )
       Header and footer Section address has been designed on Master Page.
Please help me to resolve these two problems as soon as possible.
Regards
Piyush

I found this post which I hope helps:
This can be done by bit of tweaking using JavaScript.
Actually the problem was, the header was printing continuously in subsequent pages and once the header data was over the rest of the pages contained blank header. But we need have to print same header for each group of items till that group of items finish in the specific page. And for new group of items different header will be filled and so on.
So to overcome this issue, create the item table in such a way that the header data is also included in the item table for each group of items. In the layout, select your header field and the event READY LAYOUT and write the below JavaScript code. This event is called for each page for that header field, so you can directly map the item table value and put it in your header field.
// Get the current page
var currpage = xfa.layout.page(this);
// variable to store number of fields in that page.
var fields = 0;
// Get the number of fields
        fields = xfa.layout.pageContent(currpage-1, "field", 0);
// Loop on each field on the page
        for ( i=0; i<= fields.length-1; i++ )
// Check if the field is in the item table column (it will be actually header data column in your item table)
            if ( fields.item(i).name == "TL" )
// Fetch that value and store in your header field.
                       this.rawValue = fields.item(i).rawValue;

Header.php exists but does not show up on every page.

Hi. I am starting from scratch with this.
part1.
My objective is to create a website that takes advantage of DreamweaverCC's fluid-grid-layout so that my web Site auto-flows on
smartphones, tablets and desktops/laptops.
file > new > fluid-grid-layout.
By default, it says 'unnamed.css'
I named it testSite.css
click okay.
(This is the only way to begin with a fluid-grid-layout - I think).
It opens a split view.
On the right frame is a DIV that has this text inside.
"Use Insert Panel for additional Fluid Grid Layout Elements. Note: All Fluid Layout tags must be contained within the "gridContainer" div tag."
In the right frame,
<script src="file:///Macintosh%20HD/Applications/Adobe%20Dreamweaver%20CC/Configuration/BuiltIn/F luid%20Grid%20Layout/respond.min.js"></script>
</head>
<body>
<div class="gridContainer clearfix">
<div id="div1" class="fluid">Use Insert Panel for additional Fluid Grid Layout Elements. Note: All Fluid Layout tags must be contained within the "gridContainer" div tag.</div>
</div>
</body>
</html>
QUESTIONS - CLARIFICATION.
Question ????
class = 'gridContainer clearfix"
div id = "div1 class = "fluid"
So all of the <div>s that I place inside of the gridContainer will all be assigned the 'class' fluid.
Yes ?
And I define div ids so that I can use css styles
Yes ?
I understand class in Java but I do not understand it here in Dreamweaver.
Please explain.
part2.
I inserted 4 <div>s into the gridContainer and assigned them specific div ids.
div id = square1
div id = square2
div id = square3
div id = square4
I see these assignments in the code.
But in the properties panel with HTML (not css panel) selected.
It shows ID None.
Question ????
Why doesn't the assigned div =id in the code show in the properties panel.
part3a.
index.php is my main web page.
It has several images (the 4 different squares).
I created a separate .html file for each square: square1.html square2.html square3.html square4.html.
At this point, each of those pages has only one sentence. 'contents for square#N) will be on this page'
I used the properties panel and linked the 4 images on index.php to these .html files.
When I 'View in Safari/Firefox' each of those images (squares) when clicked - bring me to the appropriate page.
So I've got some of this working
part3b.
I know that some of you have already tried to assist with this but it is not working for me.
I created a file called header.php
The contents of header.php does not have any <tags> at all.
The contents is this:
<h1> This will be the header for all of my web pages.</h1>
In index.php I included this in the code as such:
<body>
<? php require_once('header.php'); ?> // this is line 34
<div class="gridContainer clearfix">
// div ids for the images etc. etc.
</body>
</html>
View in Safari/Firefox
Parse error: parse error in /Library/WebServer/Documents/dwwdSite/index.php on line 34
I tried this.
<? php include_once('header.php'); ?>
<? php include('header.php'); ?>
and I get the same exact error.
When I 'view in Safari/Firefox' header.php it displays what I want:
This will be the header for all of my web pages.
Question ????
What am I doing incorrectly ?
From one of my other posts - as we got onto this topic, it was suggested that I just place the php code:
<? php include('header.php'); ?>
within the index.html file exactly where I want it to show up.
I want it to show up at the top of each page.
Well at this point it is not showing up anywhere !!
But if I have header.php active in Dreamweaver and 'view in safari/firefox'
the browser does show the header.php page.
part4.
Question ????
And should I include
<? php require_once('header.php'); ?>
at the top of each of the square.html files if I want the header to show up on each of those pages.
I think this makes sense.
part5.
Question ????
When I view testSite.css
I understand that it has 3 different sets of selectors for each of the 3 different devices.
But how do I 'assign' css properties to the contents inside of header.php ?
With header.php active/open, from the 'properties panel' I can select CSS and choose: font, size, color from there and it works
but should I not have this included in the testSite.css ?
Lots of questions. Hope that I explained it in an organized fashion.
thanks again.
Nancy O.
Sudarshan Thiagarajan

> So all of the <div>s that I place inside of the gridContainer will all be assigned the 'class' fluid.
Nope - but everything that you insert using the Insert panel will give you the opportunity to specify that it's a fluid element, which you can do by enabling the checkbox on the dialog. This means that you CAN insert a <div> that is not a fluid element. It's only the ones that you insert as a fluid element that will get that class automatically.
>And I define div ids so that I can use css styles
Assigning an ID to any element on the page allows you to target that element with a particular CSS rule.
> I understand class in Java but I do not understand it here in Dreamweaver.
> Please explain.
There is no similarity at all. There are four ways you can identify a page element to apply a CSS rule:
1. By tag, e.g., all paragraph tags on the page.
2. By context, e.g., any paragraph tag that is within a <nav> element.
3. By 'class' assignment, e.g., any element that has been given a particular "class" attribute -> <p class="foo">
4. By ID, e.g., any element that has been given a particular "ID" attribute -> <p id="foo">
The weight of any style (i.e., which one to use in the event of conflict) is determined by a number of characteristics of the CSS 'selector' that carries the rule.
> Why doesn't the assigned div =id in the code show in the properties panel.
Assuming your code is correct, it will, e.g.,
<div id = "square1"></div>
<div id = "square2"></div>
<div id = "square3"></div>
<div id = "square4"></div>
Try this -
<html>
<head></head>
<body>
<?php require_once('header.php'); ?> // this is line 34
<div class="gridContainer clearfix">
// div ids for the images etc. etc.
</body>
</html>
and I get the same exact error.
Yes - there is no space in "<?php".
Let's start with that.

Page Header not repeating on each page of Subreport

I made a crystal report whose record detail is opening in a subreport. I want to make Page header to be present on each page of my subreport but i am not able to do it. what setting i should apply for that?
Regards
Jitendra

Hi Jitendra,
You need to create fake page header in subreport.
For more information, check out this link
https://boc.sdn.sap.com/node/19833
Hope this helps.

In the header file generated by javah, the package name is not in the funct

and in the header file generated by javah, the package name is not in the function declaration:
/* DO NOT EDIT THIS FILE - it is machine generated */
#include <jni.h>
/* Header for class VocalJNITest */
#ifndef IncludedVocalJNITest
#define IncludedVocalJNITest
#ifdef __cplusplus
extern "C" {
#endif
* Class: VocalJNITest
* Method: JNI_1myJNI
* Signature: ()V
JNIEXPORT void JNICALL Java_VocalJNITest_JNI_11myJNI (***please not there is no package name in it****)
(JNIEnv *, jclass);
#ifdef __cplusplus
#endif
#endif
In the VocalJNITest.java file, I put package com.jni.test in it, why dose it not appear in the VocalJNITest.h file.

it works,
thanks alot, but java really confuses me, for example, if i run the app, i need to type the complete name java com/...../jnitest, in which the "/" is used instead of
". " like com.vocal.jnitest as the package name in the source file.
but when using javah, i need to use ". " instead of "/";
i tried com/vocal/jnitest, but failed so i post the question here.

Dynamic Header row for table not aligned properly on 2nd Page

Hello Friends,
The problem is like this :
We have a table with dynamic number of columns and few of them are being hidden at runtime based on a configuration table.
Now problem while printing is that first page is printing the header row, but same is not being repeated on subsequent pages.
Please see the layout
Header row is warped in 2 subforms both are flowed - western text so that they will get squeezed if column is hidden
Here are the properties for subforms
1) overflowLeader => Flow top-bottom
2) OF_SF => Flowed , western text
On 2nd page all the columns are getting aligned to left hand side whereas printing fine on first page.
Thanks,
Nitin

Hi Nitin,
in this case, you must use more nested wrapper subforms and set the root subform layout from "flow" to "positioned". I cannot give advice on how the wrapper subforms are organized, since it depends on your logic, just try it out.
Cheers,
Tao

Table header not repeat in some page [Reporting Service]

I make report using reporting services in VS 2010 and SQL Server 2012.
My report have table and I want to repeat table header in each page then I set repeat in advance mode at row group I set Header Row (static) below :
KeepWithGroup : After
RepeatOnNewPage : True
But in Some page Header not repeat anyone can help me to solve this problem
Thank you.

Hi Chanon,
Based on my understanding, tablix header doesn’t repeat on some pages.
In Reporting Service, when setting RepeatOnNewPage as True and KeepWithGroup as After, a static tablix member(row or column) will display on multiple pages. In your scenario, please make sure you choose the first static member in Row Groups pane, then set
these two properties. As we tested in our environment, when setting these two tablix members as proper value, the tablix header repeats on multiple pages. Please refer to the screenshots below:
Reference:
Repeat Table Header on Each Page in SSRS
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Shuttle header not generated if on seperate page

Similar Messages

Maybe you are looking for