%SI_DOCUMENT_NAME% in Edge 3.1 not showing document name

We have a problem with the placeholder %SI_DOCUMENT_NAME% not being populated with the document name, instead it only shows the placeholder itself in the mail, i.e. "%SI_DOCUMENT_NAME%"
How can I fix this?

What reporting tool are you using when you schedule reports?
search our notes for that %SI_DOCUMENT_NAME% also try SI_DOCUMENT_NAME. I think there were some known issues with this
Regards,
Tim

Similar Messages

  • SEARCH RESULTS NOT SHOWING THE NAME OF DOCUMENT

    When I search for a document on the top level, the results in my case are relevant but they do not display the document name, meaning I have to go into the document to check if it is the one I'm looking for. For some reason the name of the file is displayed
    in results as the first line of the document. I use a document template for letters meaning that the search results gives as list of documents that all have the same name displayed. This renders the search function almost useless as all the results are showing
    the same name. Is there a way to change the results page to display the name of the document??

    Hi,
    Based on your description, my understanding is that you want to show search results by document name instead of the Title.
    Here are two links about how to show document name in search results, you can use as a reference:
    http://chris.gg/2011/06/display-filename-instead-of-document-title-in-sharepoint-search/
    http://social.technet.microsoft.com/Forums/en-US/966db1b2-3288-4a31-8c98-19bf0dfc1316/show-search-results-by-document-name-not-by-title?forum=sharepointgeneralprevious
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

    After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

    I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
    In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
    I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

  • Xformbuilder error ... Could not save document Name/Name-Schema.xml

    Hello everyone,
    We're using 7.00 SP14 and I have a problem with the xml forms builder on one of our systems. We're having a 3 system landscape - all three are on the same patch level etc.
    I was able to create a new xml form on one machine, unfortunately it doesn't work on our P-system. I tried to create a new form as well as copied an existing one - with the same error result.
    While saving a project the following errors appear:
    The following error occured when saving the schema: Could not save document Name/Name-Schema.xml. Reason: Operation is not supported
    The project could not be saved on the server. Do you want to save a local copy?
    Oct 13, 2008 2:45:43 PM - (ERROR)com.sapportals.wcm.app.xfbuilder.server.ServerManager :Could not serialize document: Operation not supported
    Does anyone know what the problem is? I'd appreciate your help, thanks.
    Sincerely,
    Susanne
    Okay I just found out that it's not possible to create a new folder in KM under xmlforms. That's working on the other 2 systems quite well. I have all the admin roles but somehow somewhere somewho must have restricted that. We found out that ice, etc, runtim, entry points and maybe even a few more aren't setup to create new folders in there. Does anyone know where/how to change that? It doesn't work with Details - permissions etc.
    Edited by: Susanne Zahn on Oct 13, 2008 3:40 PM

    For anyone who's interested in the solution.. there you go.
    14.10.2008 - 17:53:00 CET - Antwort von SAP     
    Dear customer,
    Can you please check whether the repository /etc is in read-only
    mode?
    Please navigate to -
    System Administration -> System Configuration -> Knowledge Management
    -> Content Management -> Repository Managers -> File System Repository
    There you can see the checkbox for "read-only".
    Please insure that this is not ticked. If it is, please uncheck it
    and building/saving the project again.

  • I have an I phone 4s and I have many contacts in my phone.  However, whne my phone rings or I receive a text, the phone does not show the name of the contact person only the phone number.  I have checked every setting I can think of ?

    I have an I phone 4s and I have many contacts in my phone.  However, when my phone rings or I receive a message.  The phone does not show the name of the caller.  It only shows the phone number that is calling.  I am sure this is a setting problem, but I have checked every setting I can think of.  Any suggestions??

    If you are a Verizon user try this:
    Open the phone and dial *228. This is a Verizon over-the-air programming number.
    When the system answer press 1 for "Program or activate your phone"
    Wait for the call to disconnect. You should get a prompt stating "Settings updated."
    Double tap the Home button to bring up the recently used apps list at the bottom.  Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
    Wait a 3-5 minutes.
    Try your phone again and see if it's fixed.

  • Not showing Caller Name on E51

    I have upgrade software but after that my phone not showing caller name on the screen.Before upgrading my phone was shwoing caller name when I received call. my all phone numbers are on SIM , can some body let me know how this will work or its setting.

    The problem may be, that you have all your contacts on the SIM card and on the phone as well. Is that possible?
    Duplicate matches for a specific phone number lead to not showing a phone number at all...
    By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
    The day we stop improving is the day we stop being good.

  • My iPhone 5 does not show caller name even though the number is saved with a name in contacts

    My iPhone 5 does not show caller name even though the number is saved with a name in contacts

    Contact your carrier. Caller ID is a carrier feature.

  • E52 not showing contacts name in inbox

    Hi,
    iam facing this problem of my e52 not showing contacts names in inbox.
    Some of the contacts name are shown, those which was originally in my phone memory.
    because i do a lot of trading, i constantly adds new numbers to my contacts from the sms they sent. But the main problem is here is even after i added their contact giving them names, the names doesnt show up in inbox, its still just numbers.
    desperately need help for this. how can a business phone have this kind of problem?
    Solved!
    Go to Solution.

    This happens to me too when I store the number under two names, or the synchronization creates double entries, for example:
    Two names:
    1234    Anna    
    1234    Bea
    Double entries
    1234    Anna
    1234    Anna
    When the text message comes in, there's no name. But you can send a message either to Anna or Bea and the message outbox shows the proper name.
    The solution is to delete one entry or merge the duplicate contacts.
    Hope this helps.

  • On OS 5, the contacts with international format do not show the names when they call me. any idea why?

    I have updated my Iphone 4 software to OS5, and since then the names of the people who call me stopped to appear and only their number is showing. after checking, i found out that the contatcs whom local phone number is saved in an international format are affected by this problem. if i save them without the country code, then their names appear.
    Also, some non local numbers that are saved in the format of 00966--------- instead of +966 ------- are also not showing the name of my contact when they call me.
    any idea about this knowing that the older OS version didn't have an issue with this?
    Thanks

    This is the same problem I have.  I thought it was my phone only, but now I realize it is a common thing.  I hope they release a fix to this, as they did in 2007 & 2007 when 3G was released.  Will be waiting and good luck to us all.

  • Bpel console not showing domain name

    Hi
    i have installed a new jdev 10.1.3.1 and also have 10.1.2. first version is working fine examples but bpel console is not showing domain name in 10.1.2.
    pls anyone can tell me what may be the problem.Is it bcoz of two version in same machine.?? Its urgent help out............

    this is understandable - at per default we use oracle lite - which only allows ONE installation on a windows system ..
    to run both in paralell you have to install a db and create the 2 schemas (10.1.2.0.2 and 10.1.3.1) - I posted a blog note on this ..
    http://clemensblog.blogspot.com/2006/04/oracle-bpel-xe-part-2.html
    hth clemens

  • Not showing document in Fbl3n

    Dear All,
       Iam getting there are certain document which is cleared but not showing in FBL3N . but same i can see in BSAS  table. what will be the reason. Date & everything i given correctly. This is something system issue.
    Pls help. Good solution will be rewarded.
    Thanx in advance

    Hi,
    Check your layout and ensure that filtering is not there
    check in your dynamic selection in FBL3N and see that nothing is there
    Try and reply
    regs
    sunoj

  • Finder not showing documents folder under user

    In finder, if I click user (my name) in left column, in the right column it no longer shows the document folder.
    If I click on documents in the left column, they display, and show the path as (my name)/documents (I think I have that turned on in preferences).
    In other words, documents is where it should be, just not showing up in finder under user (my name).
    What is going on?
    bob

    It's possible that the invisible bit got set. Most often it gets set, and no one knows why, on drives. But I've seen it get set for folders as well (although having it set on the Documents folder is, I think, a new one). If this the case and you have the Path item in the window toolbar, when you select it with the the Documents folder open, you will see that the Docs folder icon in the list looks greyish compared to the other items. Even if you aren't sure whether this is the problem, you can run this Terminal command:
    chflags nohidden ~/Documents
    Launch Terminal from your Utilities folder, copy and paste the above line, and press the Return key. If the invisible bit got set, that will fix it. If that isn't the problem, then nothing will happen. The command might fix it, and it won't harm anything at all.
    Francine
    Francine
    Schwieder

  • Archived Deliver not showing Document FLow _RV_LIKP

    Folks
    I have started archiving for delivery object. I am able to successfully archive one document and can view the document in SARI and the only issue i am having is the when i open the archive document  the ICON which shows "DOCUMENT FLOW" is not click able so user is not able to see the document flow to find the Sales Order/STO# it was created from.
    In my customization for RV_LIKP under the setting "    Archiving Control for Delivery" i have put residence time as "5" and RNO "0"
    Also what is the RNO field  stands for .
    Thanks

    Hi Andy,
    Go through the link given below.
    http://help.sap.com/saphelp_40b/helpdata/pt/b7/19752690e211d1a5510000e82deaaa/content.htm
    The last line looks important.
    Deliveries should be archived before sales documents and billing documents. This sequence is a result of the way the documents are linked via document flow.
    Hope it helps,
    Regards,
    MT

  • Mouse over Tabs - shows document name?

    I notice when I go to close tabs in CS5, the full name of the document appears in a white box over and to the left of the tab, when my mouse goes over the tab, then I can't close the tab until the document name disappears- which takes about 5 seconds, allthough seems like forever. Does anyone know how to turn that feature off, or reduce the time it displays the name?

    Yes, when mouse over the document tab, full name of document will appear. You can just click once on the white box it will disappear.
    On Preferences>General dialog, you can check off Show Tool Tips to not show the white box when mouse over document tab, but it will also stop all tips when mouse over a tool, an icon on a panel/dialog.

  • Most Popular Items Report: items listed in report are not the document names or titles

    I have a document library that's loaded with typical corporate ppt, word, and pdf files.  When I run a Most Popular Items report on the library, the list of items displayed in the report are not the document file names or document titles. 
    Instead, the report is showing information that seems to pulled from within the content itself.
    For example, there's a new corporate ppt template in the document library and the Most Popular Items report shows the sharepoint url for the ppt file as being one of the most popular items.  Let's say that the file is named Standard_ppt_template.ppt. 
    The url for one of the most popular items reflects that in the URL.  However, the item is listed in the Most Popular Item as "Company Confidential".  The report seems to be pulling the words "Company Confidential" listed in the
    footer of the ppt template and showing that as the most popular content item. 
    Is there a reason or setting why the Most Popular Items report is not returning a list of items based on either the file name or the document title?
    Thanks in advance for any advice.

    Hi,
    According to your post, my understanding is that the PPT files items in the “Most Popular Items” report display these items’ names seem to be pulled from the PPT files’ content.
    Per my test, the Word, Excel, PDF, .txt, .png files items in the “Most Popular Items” report will display these items’ names based on the corresponding items’ title value if they have, or the corresponding file name if these items don’t have the title value.
    However, it’s by design that the PPT files items in the “Most Popular Items” report will display these items’ names only based on the beginning of these PPT files’ content rather than these files’ names and the corresponding items’ title value.
    Best Regards,
    Yumi Fu

Maybe you are looking for