SI4_TestDrive - SAP didnt start after linux reboot.

Hello Forum,
I installed the preview version (SI4_TestDrive) on Suse 9.1./DB2 The installation went through successful and I could connect to SAP from another system.
But when I reboot the linux I couldn't start SAP.When I issue the command "startsap si4host" it throws an error "no start profile found"
My second problem is : JAVA Gui... I installed Java Gui but when I issue the command 'gui' as per the document the gui didn't start... says command not found .
If any one has solution for this, I would highly appreciate. - Thanks
Guru

Hello I have the same problem but, I can't down load the new Test Drives... I get thisr...
There is no version of the SAP on Linux Test Drive available for download. Please order it from the SAP Knowledge Shop: http://www.sap.com/shop -> SAP Knowledge Shop and search for the following material numbers:
SAP NW2004s Testdrive MaxDB : 50077574
SAP NW04s Testdrive Linux DB2 x86 : 50083014
Then while trying to order thought the SAP Knowledge Shop, the order doesn't go throught. I get the following error:
Error creating order. Our hotline has already been informed.
Quantity            Product           Price            Line Total            Remove
Item No.      Product description
     50077574      SAP NW2004s Testdrive MaxDB
     0,00
*0,00       EUR
USD
     0,00
0,00       EUR
USD
Purchase value (incl. VAT)          0,00
0,00       EUR
USD
         plus Shipping costs       EUR
What can I Do?
Thanks in advance,
Carlos Gonzalez

Similar Messages

Ias-component doesn't start after linux reboot

Hi,
i've successfully installed the oracle infrastructure. it's all working until i reboot my rhes3 server, all the opmnctl ias-component are stopped/NONE and did not start automatically.
how can i configure the oracle infrastructure to start automatically after reboot?
dcm-daemon, oid, oc4j were all stopped and i couldn't restart it either.
thanks.

In my opinion, it is better to manage the starting and stopping of all Oracle services yourself - rather than leaving it to the OS to do this for you - there are many reasons for this......for instance - if you are running on a split tier configuration, and there is something wrong with the listener for your repository, then the mid tiers will not come up until the repository is up - and so on and so forth....
I have one script that calls three scripts that check, stops or start all oracle services. I have the OID and portal tiers on one server - the start script is given below - and the stop and check scripts are all variations of this start script. Hope this helps.
#!/bin/bash
# - DATE
# This scripts starts all Oracle Services on SERVER_NAME
# Start the EM console on SERVER_NAME - Infra (Mid) Tier
echo "Starting the EM Console on the Infra Tier"
/u01/app/oracle/product/OAS/10.1.2/infra/bin/emctl start iasconsole
/u01/app/oracle/product/OAS/10.1.2/infra/bin/emctl status iasconsole
# Start EM Console on SERVER_NAME - Portal (Mid) Tier
echo "Starting the EM Console on the Portal (Mid) Tier"
/u02/app/oracle/product/OAS/10.1.2/portal/bin/emctl start iasconsole
/u02/app/oracle/product/OAS/10.1.2/portal/bin/emctl status iasconsole
# Start Services on the Infrastructure tier - including OID, HTTP Server
# and OC4J_SECURITY
echo "Starting Oracle Services on the Infrastructure Tier"
/u01/app/oracle/product/OAS/10.1.2/infra/opmn/bin/opmnctl startall
echo "Status of Oracle Services on the Infrastructure Tier"
/u01/app/oracle/product/OAS/10.1.2/infra/opmn/bin/opmnctl status
# Start Services on the Portal (Mid) tier - including Portal, OC4J_Portal,
# Forms, Discoverer and OC4J_SECURITY
echo "Starting Oracle Services on the Portal (Mid) Tier"
/u02/app/oracle/product/OAS/10.1.2/portal/opmn/bin/opmnctl startall
echo "Status of Oracle Services on the Portal (Mid) Tier"
/u02/app/oracle/product/OAS/10.1.2/portal/opmn/bin/opmnctl status

OC4J_BI_Forms Fails To Start After Windows Reboot

Hi,
After upgrading the metadata repository database to 9.2.0.6 and updating the compatible parameter and creating a new pfile, my OC4J_BI_Forms server fails to start automatically after a reboot.
I can start the OC4J_BI_Forms server manually and it works fine, but would like it to start automatically after a reboot like it used to.
I checked the server.xml file and verified autostart is set to true.
I also checked the server's log files and opmn log files, but couldn't find any error messages saying OC4J tried to start and failed.
I noticed that OID is taking a little longer to start than it used to. Is it possible this lag is causing the OC4J_BI_Forms to fail starting automatically?
All other servers start fine after a reboot - only OC4J_BI_Forms is not working correctly.
Thanks,
Jim
Message was edited by: Jim
434963

As a workaround for this problem, I created a simple batch file containing the command:
<tt>d:\orahome2\opmn\bin\opmnctl startproc ias-component=OC4J</tt>
I then created a scheduled task in Windows Task Scheduler to run the batch file on server startup. So far it seems to work fine.
Would still like to know why the OC4J_BI_Forms instance is failing to autostart, if anyone has any ideas.

SAP not starting after crash: Terminateing With error code 12

Hi,
After system crash SAP is not starting normally. When running startsap under SIDadm puts out: /usr/sap/TST/SYS/exe/run/startdb: Terminateing With error code 12
startdb.log shows that:
/oracle/TST/102_64/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shares object file: No such file or directory
I have checked - file and directory are present.
However - when manually starting DB under oraSID and then logging in as SIDadm and starting SAP - everything starts normally.
(Allthough SID is has been changed before - system also worked normally after SID change) I have checked userrights and groups , also profile - everything seems to be normal. Any ideas?
Edited by: Kristjan T on Mar 16, 2011 1:16 PM

Hi,
1.what UNIX Flavor are we talking about -> SuSe
2.What SAP Kernel Release is in place (may be 6.40 non EX2 ?) -> 6.40
3.What release is the DB suposed to have? -> 10.2.0.2.0 - 64bit Prod
4.I see, you are calling an sqlplus from a 10.2 ORACLE_HOME.
Is that the correct HOME the DB is running with ? -> Yes
5.Can you start the DB with
brconnect -c -u / -f dbstart -> NO
Error is:
:devadm 51> brconnect -c -u / -f dbstart
BR0801I BRCONNECT 7.00 (40)
oracleDEV: error while loading shared libraries: libskgxp10.so: cannot open shared object file: No such file or directory
BR0278E Command output of '/oracle/DEV/102_64/bin/sqlplus /nolog':
/oracle/DEV/102_64/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: No such file or directory
BR0280I BRCONNECT time stamp: 2011-05-05 15.01.17
BR0279E Return code from '/oracle/DEV/102_64/bin/sqlplus /nolog': 127
BR0302E SQLPLUS call for database instance DEV failed
BR0303E Determination of Oracle version failed
BR0280I BRCONNECT time stamp: 2011-05-05 15.01.17
BR0804I BRCONNECT terminated with errors
(Different machine but same situation)
6.As already requested, what is the output of:
6.1.ldd sqlplus
:devadm 55> ldd sqlplus
ldd: ./sqlplus: No such file or directory
in addition:
6.2. env | grep -i ora
devadm 56> env | grep -i ora
PATH=/oracle/DEV/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/home/devadm:/usr/sap/DEV/SYS/exe/run:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/devadm/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/bin/X11:/usr/lib/mit/bin:/usr/lib/mit/sbin
LD_LIBRARY_PATH=/usr/sap/DEV/SYS/exe/run:/oracle/client/10x_64/instantclient
dbms_type=ORA
dbs_ora_tnsname=DEV
dbs_ora_schema=SAPSR3
ORACLE_SID=DEV
ORACLE_BASE=/oracle
TNS_ADMIN=/usr/sap/DEV/SYS/profile/oracle
ORACLE_HOME=/oracle/DEV/102_64
SAPDATA_HOME=/oracle/DEV
6.3 env | grep -i nls
:devadm 57> env | grep -i nls
XNLSPATH=/usr/X11R6/lib/X11/nls
NLS_LANG=AMERICAN_AMERICA.UTF8
6.4 env | grep -i lib
devadm 58> env | grep -i lib
PATH=/oracle/DEV/102_64/bin:/opt/IBMJava2-amd64-142/bin:.:/home/devadm:/usr/sap/DEV/SYS/exe/run:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/home/devadm/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/bin/X11:/usr/lib/mit/bin:/usr/lib/mit/sbin
XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB
XNLSPATH=/usr/X11R6/lib/X11/nls
PKG_CONFIG_PATH=/usr/local/lib/pkgconfig:/usr/local/share/pkgconfig:/usr/lib64/pkgconfig:/usr/share/pkgconfig:/opt/kde3/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/lib64/pkgconfig:/opt/gnome/share/pkgconfig
GTK_PATH=/usr/local/lib/gtk-2.0:/opt/gnome/lib/gtk-2.0:/usr/lib/gtk-2.0
GTK_PATH64=/usr/local/lib64/gtk-2.0:/opt/gnome/lib64/gtk-2.0:/usr/lib64/gtk-2.0
DIR_LIBRARY=/usr/sap/DEV/SYS/exe/run
LD_LIBRARY_PATH=/usr/sap/DEV/SYS/exe/run:/oracle/client/10x_64/instantclient
Any ideas???
Br,
Kristjan T.

Auto-start OC4J process after Linux reboot

Oracle 11gR2, OC4J 10g (10.1.3.5.0), RHEL5 64 bit
Hi All,
I am trying to figure out how to get my oc4j process start at boot time. I already have a dbora script setup. I tried adding the following line to my dbora/dbstart script but it did not do anything:
#!/bin/sh
# chkconfig: 345 99 10
description: Oracle auto start-stop script.
ORACLE_OC4J_HOME=/u02/oc4j
JAVA_HOME=/usr/java/jdk1.6.0_21/
su - $ORACLE_OWNER -c "$ORACLE_OC4J_HOME/bin/oc4j -start"
I read somewhere that I may need to put the entire path like:
/usr/bin/java -jar /path/to/oc4j.jar &
Just not sure where and how to put that path in the file.
Thanks for your help all.
JrOraDBA

Hi,
To run oc4j in the background, on Linux
Execute the following command:
nohup ./oc4j -start &
to run oc4j in the background. The 'nohup' command ignores the hangup signal (closing the terminal window) and enables oc4j to continue running in the background.
In rare cases, oc4j will not shutdown cleanly with the standard command:
./oc4j -shutdown -port 23791 -oc4jadmin <admin_pwd>
In those cases, try the following command:
java -jar admin_client.jar deployer:oc4j:localhost oc4jadmin <admin_pwd> -shutdown
to stop the oc4j service.
Thanks,
Sharmela

SAP false start after kernel upgrade

Hello gurus
I've upgraded the kernel of SAP and run the command starsap and the sap starts normally. With no error messages, but when I try to logon I can't logon.
So I run the command dpmon pf=<instance_profile> and show me the error below:
DpMonInit failed - possibly no dispatcher running
DpMon: External/Internal dplib version: 102/140
The R3trans command returns 000
I also run the command cleanipc <system_number>
Does anyone know how can I solve this?
Regards

Thanks for your answer.
I run saproot.sh and also cleanipc command too.
My dev_disp.new file show the errors below
[Thr 47699260272448] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 19292) [msxxserv_mt. 1746]
[Thr 47699260272448] SigISetDefaultAction : default handling for signal 17
[Thr 47699260272448] ***LOG Q0I=> NiPGetServByName2: service 'sapmsTRN' not found: getservbyname_r [niuxi_mt.c 579]
[Thr 47699260272448] *** ERROR => MsSCommInit: NiBufListen(sapmsTRN) (rc=NIESERV_UNKNOWN) [msxxserv_mt. 9180]
[Thr 47699260272448] *** ERROR => MsSInit: MsSCommInit [msxxserv_mt. 1769]
[Thr 47699260272448] *** ERROR => MsSInit failed, see dev_ms.new for details
[msxxserv_mt. 5639]
[Thr 47699260272448] ***LOG Q02=> MsSHalt, MSStop (Msg Server 19292) [msxxserv_mt. 5700]
also file dev_ms.new
trc file: "dev_ms.new", trc level: 1, release: "640"
[Thr 47699260272448] Fri Feb 17 12:05:19 2012
[Thr 47699260272448] ms/http_max_clients = 500 -> 500
[Thr 47699260272448] MsSSetTrcLog: trc logging not active
[Thr 47699260272448] NiInit2: NI already initialized; param 'maxHandles' ignored
systemid 390 (AMD/Intel x86_64 with Linux)
relno 6400
patchlevel 0
patchno 378
intno 20020600
make: multithreaded, ASCII, 64 bit
pid 19292
[Thr 47699260272448] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 19292) [msxxserv_mt. 1746]
[Thr 47699260272448] SigISetDefaultAction : default handling for signal 17
[Thr 47699260272448] ***LOG Q0I=> NiPGetServByName2: service 'sapmsTRN' not found: getservbyname_r [niuxi_mt.c 579]
[Thr 47699260272448] *** ERROR => MsSCommInit: NiBufListen(sapmsTRN) (rc=NIESERV_UNKNOWN) [msxxserv_mt. 9180]
[Thr 47699260272448] *** ERROR => MsSInit: MsSCommInit [msxxserv_mt. 1769]
[Thr 47699260272448] *** ERROR => MsSInit failed, see dev_ms.new for details
[msxxserv_mt. 5639]
[Thr 47699260272448] ***LOG Q02=> MsSHalt, MSStop (Msg Server 19292) [msxxserv_mt. 5700]

Recon task does not start after database reboot during recon in OIM

If during a trusted recon, the database reboot then we are unable to start any recon task after the database come up. The logs does not get update. We are using OIM 9.1 on oc4j 10.1.3.3.
Thanks.
Vinay
Edited by: user504421 on Jan 23, 2009 2:49 PM

Make sure the scheduler is running. Go to http://oimurl/xlScheduler to view the status and http://oimurl/xlScheduler/admin to stop and start the scheduler if needed.
-Kevin

10g database fails to start after 3rd reboot

Hi,
I've reloaded my test server several times and loaded 10g with the default "orcl" database. Works just fine, reboot a couple times and it still works. Around the 3rd reboot the database instance fails to start. I even have to reload the OS to clear this problem. Just uninstalling Oracle and reinstalling will not clear this problem I have to reload the OS. Is there some sort of limit on the software we download from the OTN download area?
Thanks.

I found in another post that suggested I needed to update my listener.ora file. I did that and the error went to telling me that oracle was unavailable. Then I found a post that suggested this:
Set oracle_sid=orcl
SQLPLUS /NOLOG
CONN SYS/????@orcl AS SYSDBA
STARTUP
EXIT
Ran this and sure enough, the database was ok but sitting idle. It went through some initialization steps and mounted so I can now launch the manager tool and have access to my database.
So, ok, this is running on VMware and that "might" be causing the problems but this is very strange since it survived three reboots then out of the blue this issue comes up. I can live with running a batch file everytime I reboot in my little test environment so I'm ok :]
Thanks for your time.

WCS won't start after Linux Upgrade

Hi,
I've just upgrade RH to v5.0 and it all seemed to go fine except WCS won't start. I was running v5.0.56.0 on RH v4.0 (I know it's not supported) on a WLSE appliance, which ironically seemed to be fine. Now I get this....
Database server is running
Apache server is stopped
WCS is registered, but not initialized.
The Server seems to be unavailable. The possible reasons are
1. The server is not running yet.
2. The server is hanging.
3 The server has crashed.
If the server has crashed or is hanging
Please report the issue and follow the instructions to restart it.
1. Run StopWCS to stop all WCS processes.
2. Run StartWCS to start the WCS server.
3. If the server still fails to start, or you still get this
message, then reboot the machine.
Any suggestions will be most welcome.
Thanks
Scott

Hi Lucien,
Thanks for the suggestions - unfortunately I can't get dbadmin to do anything;
[root@nlcwcs1 bin]# dbadmin ?
-bash: dbadmin: command not found
[root@nlcwcs1 bin]# DBAdmin ?
-bash: DBAdmin: command not found
[root@nlcwcs1 bin]# dbadmin.sh
-bash: dbadmin.sh: command not found
[root@nlcwcs1 bin]#
Am I in the right directory?
[root@nlcwcs1 WCS5.0.56.0]# cd bin
[root@nlcwcs1 bin]# dir
aclProtocol.sql upgrade_2.2_b.sql
Backup upgrade_2.2_c.sql
Backup.lax upgrade_3.0-3.1.sql
CVS upgrade_3.0_Beta1_Beta2.sql
DBAdmin upgrade_3.0_Beta2_Beta3.sql
DBAdmin.lax upgrade_3.1-3.2.sql
dbadmin.sh upgrade_3.2_Beta1_Beta2.sql
EULA.html upgrade_4.0_Beta1_Fcs.sql
If I am, can you tell me how to use these commands please?
Many Thanks
Scott

Lenovo g570 boot failure...didnt started after last shutdown

the only response my laptop gives is the blinking of the white light inside the power button(on pressing the power button) for a few seconds.........
the problem occurred several times in the past....and some how or the other i escapd from it ,,,,,but this time nthng is **bleep** working......some say that i should have removed any usb (such as data card), b4 turning off ...is this is the issue or some other???
i removed the battery, unplugged the ac power, pressed power button for almost a minute...but i didnt work......the laptop is freezed from the past 48 hrs and nothng is really working,,,,pls help me out of this critical problem

Hi
Welcome To Lenovo Community
We are really sorry for the issue you are facing the issue.
The best way would be to visit Local Lenovo service center, they will help you for the same
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

How can I set the guests to auto start after the primary reboots?

For version 1.2 of LDOM software, how do I set the guests to automatically start after I reboot the primary? Right now if I do this:
ldm stop -f guest1
reboot primary
guest1 will be bound and manually started with ldm start
ldmd is set to start at boot.
Thanks, Kevin

Try running ldm set-var auto-boot\?=true guest1This will set the LDOM guest openboot parameter "auto-boot" to true and it should boot automatically when the Primary restarts.
Steve

After every reboot, all my addons are disabled, I have to manually enable them

The first session I start after a reboot, none of my addons are enabled. After enabling and restarting, they remain enabled for all future sessions until a reboot.
I'm using Windows 7 64 bit.

Uninstalled ZoneAlarm Pro. No change. Uninstall BitDefender. Works perfectly.

Database not automatically starting after reboot of RedHat ES4 Linux

Hi,
I have Oracle database enterprise edition 9.2.0.4 running on RedHat Linux ES release 4. Although the installation went fine and after the installation I was able to see the common processes like ora_pmon started in system, but when I reboot system the database does not comeup.
I am using dbstart command via a /etc/init.d/oracle file. This is linked to /etc/rc5.d and /etc/rc3.d as well in the Linux server.
The amazing thing is that tnslistener is started automatically after system reboot but not database. That is, when I check the status of that via the command "lsnrctl status" it shows me the one database instance that I am hoping to see correctly. But no ora_pmon etc processes are there.
Even interesting thing is that when I manually run the command "/etc/init.d/oracle start" by hand, it does start the database perfectly fine. This is the same command that I am running via the startup scripts in /etc/rc5.d and othe runlevels.
Please help me finding out why is the database not starting up automatically? I have checked the /u02/app/oracle/product/9.2.0/startup.log which just says reports that Listener has started but after that it does not show anything about database starting up.
Below I am pasting the chunk of /etc/init.d/oracle script that is supposed to start the listener and database. Please have a look at it and tell me what can I be doing wrong in this case?
ORACLE=oracle1
export ORACLE_HOME PATH
LOG=$ORACLE_HOME/startup.log
touch $LOG
chmod a+r $LOG
case $1 in
'start')
echo "$0: starting up" >> $LOG
date >> $LOG
# Start Oracle Net
if [ -f $ORACLE_HOME/bin/tnslsnr ] ; then
echo "starting Oracle Net listener"
su - oracle1 -c "$ORACLE_HOME/bin/lsnrctl start" >> $LOG 2>&1 &
fi
echo "starting Oracle databases"
su - oracle1 -c "$ORACLE_HOME/bin/dbstart" >> $LOG 2>&1
Thanks in advance for your urgent help.
--Smb

Thanks for your reply, actually I have already set the value of $ORACLE_HOME to the correct value as per my installation, sorry that line was cut when I last time pasted the chunk of my /etc/init.d/oracle file because I only wanted to paste the relevant portion of that file.
But here is the complete /etc/init.d/oracle file that I have below, please suggest what might be wrong?
thanks.
#!/bin/sh
# chkconfig: 235 99 01
# description: controls Oracle database startup and shutdown
ORACLE_HOME=/u02/app/oracle/product/9.2.0
PATH=${PATH}:$ORACLE_HOME/bin
HOST=`hostname`
ORACLE=oracle1
export ORACLE_HOME PATH
LOG=$ORACLE_HOME/startup.log
touch $LOG
chmod a+r $LOG
case $1 in
'start')
echo "$0: starting up" >> $LOG
date >> $LOG
# Start Oracle Net
if [ -f $ORACLE_HOME/bin/tnslsnr ] ; then
echo "Shahid starting Oracle Net listener"
su - oracle1 -c "$ORACLE_HOME/bin/lsnrctl start" >> $LOG 2>&1 &
fi
echo "Shahid starting Oracle databases"
su - oracle1 -c "$ORACLE_HOME/bin/dbstart" >> $LOG 2>&1
'stop')
echo "$0: shutting down" >> $LOG
date >> $LOG
# Stop Oracle Net
if [ -f $ORACLE_HOME/bin/tnslsnr ] ; then
echo "stopping Oracle Net listener"
su - oracle1 -c "$ORACLE_HOME/bin/lsnrctl stop" >> $LOG 2>&1
fi
echo "stopping Oracle databases"
su - oracle1 -c "$ORACLE_HOME/bin/dbshut" >> $LOG 2>&1
echo "usage: $0 {start|stop}"
exit
esac
exit
########################################################

Nodemanager does not restart managed server after Linux OS reboot

Running Linux 2.6.18, Sun JDK 1.6.0_14, and WebLogic 10.3, we have a correctly functioning nodemanager watching a single managed server. If I kill -9 the managed server, the nodemanager fires up a new one immediately. If, however, we reboot the box, the nodemanager will start cleanly and will not start the managed server. It appears to believe the node should remain down and reports its status as UNKNOWN.
I've seen where this is a known problem on Windows boxes, easily gotten around by supplying the -Xrs parameter to the startup parms for the managed server. (Section 5 of the general nodemanager config doc.) I don't see, however, where there's an equally clean solution for Linux.
Things I've tried:
+ When I set the server to DEBUG, it shows zero sign of receiving a shutdown signal. It's dumping loads of cluster messages, etc, into the log and then suddenly the log just ends so it's dying via kill -9. If the nodemanager is still running at that time, it might try to restart the managed server and log it somewhere as permanently failed.
+ The nodemanager only logs to INFO level, and logs no evidence of deciding to leave the node down. (DEBUG is an invalid LogLevel, so that's all I've got.)
+ A restart signal sent from our AdminServer (on another Linux box) successfully starts the managed node through the nodemanager. Nothing unusual occurs or is logged.
Things I'm curious about:
+ Is there some way to see in what state the nodemanager believes the managed server to be?
+ Is there some value in some doc somewhere that might say the server should not be restarted?
+ Is there not a log of NodeManager client actions? I don't see anything in domain.log or AdminServer.log except when the NM is down.
Thanks,
Kevin
ListenPort=5556
ListenBacklog=50
SecureListener=true
AuthenticationEnabled=true
NativeVersionEnabled=false
CrashRecoveryEnabled=true
JavaHome=/appl/java/jre
StartScriptEnabled=false
StopScriptEnabled=false
StartScriptName=startWebLogic.sh
StopScriptName=
LogFile=/appl/bea/wlserver_10.3/common/nodemanager/logs/nodemanager.log
LogLevel=INFO
LogLimit=0
LogCount=1

can you set NativeVersionEnabled to true. We have faced this in windows which was fixed by changing this property. Some notes from that issue:
Faced this interesting issue in Windows 2008 environment. Managed Servers were started by node manager and it was expected that on a system restart after a crash, the node manager will restore the state of the managed servers to the state it was before the crash. Node Manger was configured to run as a windows service. Hence it started after the server restart. But the individual managed servers were not getting started. Interestingly, for the managed servers started by the node manager there were no <Managed_Server_Name>.lck file in the <Server>/data/NodeManger folder.
To fix this always set the following properties in the nodemanager.properties on the node maager home directory.
CrashRecoveryEnabled=true /* This by default is set to false. This needs to be turned for auto restart after crash to work */
NativeVersionEnabled=true /* This is by default set to true and it should be set as such. If you turn this off on platforms for which weblogic provide native JNI libraries ( e.g. as in Windows 2008) then this wont create the .lck file and hence node manager wont restart the managed server after the crash.
Note: As per official documentation .lck files are required for weblogic node managers to do auto restart after system crash
From Official documentation:
After the system is restarted, Node Manager checks each managed domain specified in the nodemanager.domains file to determine if there are any server instances that were not cleanly shutdown. This is determined by the presence of any lock files which are created by Node Manager when a WebLogic Server process is created. This lock file contains the process identifier for WebLogic Server startup script. If the lock file exists, but the process ID is not running, Node Manager will attempt to automatically restart the server.
If the process is running, Node Manager performs an additional check to access the management servlet running in the process to verify that the process corresponding to the process ID is a WebLogic Server instance.
After the system is restarted, Node Manager checks each managed domain specified in the nodemanager.domains file to determine if there are any server instances that were not cleanly shutdown. This is determined by the presence of any lock files which are created by Node Manager when a WebLogic Server process is created. This lock file contains the process identifier for WebLogic Server startup script. If the lock file exists, but the process ID is not running, Node Manager will attempt to automatically restart the server.If the process is running, Node Manager performs an additional check to access the management servlet running in the process to verify that the process corresponding to the process ID is a WebLogic Server instance.
*/

SI4_TestDrive - SAP didnt start after linux reboot.

Similar Messages

Maybe you are looking for