Sibelius and the Mac OS Midi
I already asked Sibelius why their product wasn't working and they told me it was my soundcard. I guess on the mac that would be the core audio?
Basically, what happens is that every time I use the music program Sibelius Student, it overloads the Midi and the system crashes. Why should this be? Sibelius doesn't seem to like my keyboard either, presumably for the same reason.
iMac 4.1 Mac OS X (10.4.7)
I'm dealing with this same problem and have actually noted that you are confirmed about the YEARS because I found this problem posted December 6, 2007
http://discussions.apple.com/message.jspa?messageID=6563672
It's unfortunate that a 'Bad Taste' was left after that reply from the guy who called you a 'nitwit' - I didn't even pay attention to his name - at least you have one demiankz - and took the time to start this post. I humbly thank you.
At any rate, I was determined to find out - because I have always been struggling to 'Allow' it and last night I decided to 'block' it.
Does anyone know what is the right setting?
Also - one work around that has been working for me is this:
1) when the popup comes up (leave it up) - Open the firewall, unlock the settings padlock at the bottom left (if it is locked) -
2) find batch monitor and whatever the setting is - force a toggle i.e. if it is "allow" select "block" and visa versa - back to whatever you desire it to be. Just to force it to recognize you are changing it.
3) NOW answer the popup to match whatever you toggled to in the firewall.
4) lock the padlock again.
I've compressed a lot of jobs and I notice once I perform this it goes away for my entire job, provided I leave it alone until it finishes.
If you do something like browse the internet or work on other things, the message tends to pop up again.
Of course, after your job finishes, you will have to do this again - and that's why I wish people would keep responding to this post until we get an answer.
Persistence causes results. Negativity just causes - well, just ignore that.
At least attempt to be helpful, which I felt I have tried. It may work, it may not, or it may cause someone to recognize what the real problem is.
Good luck and hope we get an answer soon!
Message was edited by: Jonefer
Message was edited by: Jonefer
Similar Messages
-
Does the Mac mini mid-2010 have an active PFC power supply?
I'm about to buy a UPS unit to run my NAS, and I'd like to connect my Mac mini to it as well. Does the Mac mini mid-2010 model have an active PFC (power factor correction) PSU (power supply unit)?
I've read that if it does (as the Dell XPS series do), then one of the cheaper UPS units won't work because those typically have modified/simulated sine wave outputs (you'll only notice when the power is out and the UPS is feeding power from its battery). It would mean I'd have to buy one of the more expensive UPS units like APC Smart-UPS SC620 or CyberPower CP1000PFCLCD.
I can't seem to find any resources that explain this. Please?FWIW, I use one of these:
http://www.cyberpowersystems.com/products/ups-systems/soho-ups/cp425slg.html?sel ectedTabId=overview&imageI=#tab-box
for my HTPC setup. I have a 2010 Mini with a couple of USB drives plugged
into it, my 42" Samsung LCD TV, cable modem, cable box, and an Airport Extreme
Base Station running off of the backup power ports (not my 5.1 receiver for obvious
power reasons). With all on, I get enough time to gracefully power down the Mini with
time to spare when power goes out. When not watching TV or listening to music,
the cable modem and AEBS can run a long time during a power outage.
I have had this setup for around 2 years and have had no ill effects on any of
the gear and I do periodically have everthing powered then yank the AC
cord to cycle the battery. -
How do i use my iMac and the macs wired internet connection to share the internet with my iPod and iPhone. For 6months I had set up a network that shared the internet through bluetooth to my iPod 5th gen but i messed it up when i tried to add my iPhone 5s and i can't remember how to do it.
The following has instructions: OS X Mavericks: Share your Internet connection
-
I have a Mac Pro using OSX 10.7.4. When using apple mail I click on the address icon to obtain email address and nothing happens. I've restarted both the application and the Mac but still won't open address book. Any ideas please.
Assuming you have these accounts set up in Mail, open preferences and under Accounts tab, edit the SMTP outgoing server list. Do you have a .mac address in the list? If so, delete it.
Are you using iCloud?
For the troubled account, select the correct SMTP server for that account in the box and check the box to use only that server with that account. -
User Contributed Tips in the Mac Pro Displays and the Mac Pro forum
*The following User Contributed Tips are located in the Mac Pro > Displays and the Mac Pro forum:*
None at this time.
*The following related tips are located in other areas of Apple Discussions:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
See also User Tips LibraryYou can use the two graphics cards, but it's only useful if you have more than two displays. It won't give you higher speed.
-
I would like to set up a homegroup with a new Macbook Pro and 2 Windows PCs. The PCs are wired to an Airport Time Machine and the Mac is wireless. All computers have internet through the Airport Time Machine.
The method for setting up file sharing is described here:
http://homepage.mac.com/rfwilmut/notes/sharing.html -
accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help
I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.
-
Nvidia CUDA for 27" iMac and the Mac Pro
I want to use Adobe Premier CS5.5 and it's Mercury Playback engine. What Nvidia CUDA-enabled card should I get for the 27" iMac and the Mac Pro to use this feature in Premier CS5?
No. Open the App Store on one computer running Snow Leopard. Purchase and download Lion. On the other computer open the App Store, log on using the same Apple ID, re-download Lion at no extra charge.
Alternatively, see Burning A Lion Boot Disc -
I want to create an app. Can you tell me the difference between iOS developer program and the mac developer program?
Is the difference the device you're creating your app on, or for?iOS Developer Program is only for those who wish to develop iDevice apps. Mac program is for those only developing Mac applications. If you wish to do both, then you need to enroll in both programs.
-
What is the best manual to help me learn Mountain Lion and the Mac?
What is the best manual to help me learn Mountain Lion and the Mac?
The internet is your friend. http://www.apple.com/support/macbasics/, http://www.tuaw.com/tag/mountain%20lion%20101/
-
09 I Mac goes asleep ends up with a spinning disk on the screen and the mac will not respond has to be rebooted
First this:
In EnergySaver deselect "put the hard disk to sleep when possible". You must logout after the setting to make this effective.
This probably will not solve it, but let it be deselected.
When the issue is still there:
Open Terminal;
copy/paste following command (after every command hit "enter" key)
pmset -g | grep hibernatemode
when the answer is not 3 write it down;
then copy/paste following command
sudo pmset -a hibernatemode 0
reboot
Open Terminal;
copy/paste following command
sudo rm /var/vm/sleepimage
after that type EXIT in Terminal and close Terminal.
This does following for you:
it will set the hibernatemode to zero: the sleepimage (a copy of the complete ram) will not be written and the space on the HD is freed up.
This sleepimage does not do anything for you but taking time at sleep/hibernate and startup. It is an old remnant of earlier days. -
KeyAgent and the Mac HAL services failing to start at boot camp install
After installing windows 7 x64 with boot camp on my 2008 macbook pro, I went to install bootcamp with my leopard disc, and it wouldnt install properly. At the end KeyAgent and the Mac HALservices failed to start. Then when the computer restarted after install, the computer still acts like boot camp wasnt installed
After installing windows 7 x64 with boot camp on my 2008 macbook pro, I went to install bootcamp with my leopard disc, and it wouldnt install properly. At the end KeyAgent and the Mac HALservices failed to start. Then when the computer restarted after install, the computer still acts like boot camp wasnt installed
-
I have a windows 7 dvd in the drive and the mac is set to launch from the dvd drive. How do I change the startup disk?
Hold the option key at startup and when you get to the boot panel select your Mac OS drive.
-
Just bought New battery charged it and the mac finds it but can't start it without charger and when i remove charger in os it dies right away what to do???
Here´s some info:
Macbook Pro 2008 (Early)
Lion
Some INFO from power in about mac
It´s Danish hope you can understand the info
Batterioplysninger:
Modeloplysninger:
Serienummer:
Producent: SMP
Enhedsnavn: ASMB012
Pack Lot Code: a0b0
PCB Lot Code: c0f1
Firmware-version: 8800
Hardwarerevision: 0
Cellerevision: 0
Oplysninger om batterispænding:
Resterende kapacitet (mAh): 5200
Fuldt opladt: Ja
Oplader: Nej
Fuld ladekapacitet (mAh): 5200
Oplysninger om batteritilstand:
Antal cykler: 1
Betingelse: Normal
Batteri installeret: Ja
Strømstyrke (mA): 0
Spænding (mV): 11796
Energiindstillinger til system:
AC-strømforsyning:
Interval for vågeblus for system (minutter): 30
Interval for vågeblus for disk (minutter): 10
Interval for vågeblus for skærm (minutter): 10
Genstart automatisk efter strømafbrydelse: Nej
Afbryd vågeblus ved ændret spændingskilde: Nej
Afbryd vågeblus, når skærmen slås op: Ja
Afbryd vågeblus via LAN: Ja
Aktuel strømkilde: Ja
Vågeblus dæmper lysstyrken: Ja
PrioritizeNetworkReachabilityOverSleep: 0
RestartAfterKernelPanic: 157680000
Batteri:
Interval for vågeblus for system (minutter): 10
Interval for vågeblus for disk (minutter): 10
Interval for vågeblus for skærm (minutter): 2
Afbryd vågeblus ved ændret spændingskilde: Nej
Afbryd vågeblus, når skærmen slås op: Ja
Vågeblus dæmper lysstyrken: Ja
Formindsk lysstyrke: Ja
RestartAfterKernelPanic: 157680000
Hardwarekonfiguration:
UPS installeret: Nej
Oplysninger om oplader:
Tilsluttet: Ja
Id: 0x0100
Watt (W): 85
Revision: 0x0000
Familie: 0x00ba
Serienummer: 0x004fe0c9
Oplader: NejTake it to an Apple Genius Bar to be checked out. It will either be the battery or the Logic board (not sure the charging circuit is a separate part. If it is then it mya be just that part).
If logic board just use it plugged in as for the cost of changing out the logic board you can buy a new system. -
I am writting a document in spanish and the mac book pro changes the words to english how do I stop this
I guess you are talking about the spellchecker.
Select the text you want to be Spanish:
Inspector > Text > Text > Language > Español
Why not set your Mac to be in Spanish?
Menu > Apple > System Preferences > Language & Text > Language > drag Español to the top of the list
Peter
Maybe you are looking for
-
Screen turns green with pink and white lines thru it,frozen,wont turn on or off
I was using an app on the 4th Generation Ipod Touch and all of a sudden the screen froze for about a minute and then turned a light green color with many small white lines through it. Also we cannot get the Ipod to turn off or on... Help?
-
How do I download Adobe Acrobat using the Agreement Number provided by my employer? Having difficulty connecting to Adobe Chat with Support option.
-
Leopard graphics & effects.
hello. i am a newbie, just purchased today the 24 inch model of imac with 2.4 Ghz and 256 MB Ati. i busted my head trying to find a way to activate/enable those cool graphics effects that leopard has but no succes, i dont know where to navigate and w
-
Does anyone know how to install [was: use] photoshop cs6 on mac
I just purchased Mac and I have the photoshop cs6 software that i had purchased for my other computer can some one please tell me how to install on my MAC
-
RDWEB not redirecting printers on 2012 VDI pool deployment
I have RDWeb running on Server 2012 along with a 5 machine VDI pool. If a remote user connects to the RDWeb server and then connects to a desktop in the pool, their local printer will not show up. If the user connects directly to a machine through