SICF- only in display mode

Hi all,
I want the tcode SICF to be in display mode alone.
Under which authorization object it comes?
Can I make only in display mode.
Regards,
R.Suganya

Hi Alex,
already full authorization was given.
now i changed to only display. now it is working fine.
thanks.

Similar Messages

GET_P Method for Link in table - only in display mode

Hello,
i created an assignmentblock to display a ztable (Simple Object).
One column in the table is homepage.
For this attribute i added some coding to the GET_P_Method to have a link.
The link works fine - but i have this link now not only in display mode but also in edit mode for the table.
As a sideeffect this column is now longer editable.
How should i change my GET_P coding so that the link is only there in display mode. In edit mode the field should be editable (no link).
Thank you
Best regards
Manfred

Hello Manfred,
I do not know about your system... but the usual GET_P-methods do have an importing parameter IV_DISPLAY_MODE. This tells you if you are in display or edit mode.
Check method CL_BT115QH__DETAILS_CN00->GET_P_ORDER_REASON.
Or even more general: GETP_XYZ in your context node class.
The part with the IF statement should be trivial.
cheers Carsten

Issue SLFI should open in read only or display mode

If we open an issue in CRM_DNO_MONITOR we can choose whether the issue
should be opened in change mode or read mode.
We can do this by means of >Extra > Settings and then choosing for
Display or Change in the General tab.
This way we can read issues as a default setting, this way the issue is
not locked !! Only if we want to change it we set it to change mode and
continue with the issue.
However if we do the same using DSWP or SOLMAN_ISSUE_MGMT the issue is
always opened in change mode, and results in a lot of locks in the
system. How can this be changed, is there some kind of customizing for
this or menu option.
The handling of issue does not seem to be consistent for the different
methods in handling them.
Who has the same problem with locking?
Who has a working bypass w/o manual switching from change to display?
Thanks in advance,
Peter Hendriksen

Thanks for the reply.
Anything is welcome at this point.
And yes, I did try both through PowerShell and through the Unlocker and the behavior is pretty much the same. If the item is checked in, there is no trace that it is locked, if I Check it Out (the only thing I can really do with it) it shows as "LongTerm"
but then throws the same exception
Unlocking...
Error occurred. Details:
Save Conflict
Your changes conflict with those made concurrently by another user. If you want your changes to be applied, click Back in your Web browser, refresh the page, and resubmit your changes.
   at Microsoft.SharePoint.SPFile.CheckIn(String comment, SPCheckinType checkInType, Boolean bIsMigrate, SPUser modifiedBy)
   at Microsoft.SharePoint.SPFile.CheckIn(String comment)
   at ForceSPItemUnlock.UnlockerForm.UnlockButton_Click(Object sender, EventArgs e)
The method UpdateItemCheckoutExpiration sounds insteresting though.
"The more difficult something became, the more rewardant it was in the end"
http://ftduarte.blogspot.com

Exit for CJO2, Some fields should me only in display mode

Hi Experts,
I have to do certain field of CJ02 IN non EDITABLE MODE( Only Display) .
Please suggest me which user exit can be used ?
Rgds
Mohit

Done, Using Enhancment Points

How to enable the 'Ship-To Address' field only in 'display ' mode in the SC

Hello,
We would like the 'Ship-To Address' field to be locked for change mode in the SC.
Regards,
Lina

Hi ,
If you wish to hide or show fields, proceed as follows(through screen variants):
1. Determine the screen variant, for example, BBP_SC(For shopping cart), using the list in documentation of BADI BBP_SCREENVARIANT.
2. Copy this screen variant, for example, in Zbbp_SC, in Transaction SHD0.
3. Change the new screen variant as required. Note that you can only change the display properties for fields of table controls. You can switch the display on and off.
4. Implement the appropriate method (see the list above). Fill the export parameter EV_SCVARIANT with the new screen variant.
You can create multiple screen variants for a screen and then select these in the BAdI depending on the user or on other criteria.
here is sample code in BADI BBP_SCREENVARIANT implementation after creating Z screen variant.
Method IF_EX_BBP_SCREENVARIANT~GET_SCREENVARIANT_SC.
IF iv_progname EQ 'SAPLBBP_SC_UI_ITS'
AND iv_dynnr EQ '0120'
AND flt_val EQ c_fltval.
IF iv_scvariant EQ 'BBP_SC'.
ev_scvariant = 'Zvariant'.
ENDIF.
ENDIF.
ENDMETHOD.
Please reward points if helpful..
Thanks
Venkatesh

X200s - 50Hz interlaced display mode only... What a headache!

Bought X200s (1440x900 resolution) recently.
Have found it to be very bad for my eyes.
I've used to work on my aforetime Quanta for hours w/o any problems.
Now with X200s I do have blearing eyes and headache very soon.
Investigating the problem I've found that the best (and the only) display resolution possible is 50Hz.
Moreover, only interlaced display mode is possible, even with native resolution!
So the best mode we have with the newest X200s is 50Hz interlaced...
Well, I've seen such LCD monitors when I was young (that was ages ago)...
But now???
I wonder if there is any other notebook (either netBook) on the market now with maximum refresh rate less then 60Hz?
No fear!
I'm definitely sure that Lenovo should recall this piteous product ASAP.
Message Edited by gelleal on 03-20-2009 12:25 PM

@lead_org
I do not compare CRT to LCD at all.
To be more clear:
1. All modern LCD screens (including all laptop screens currently on market) hold at least 60Hz refresh rate/non-interlaced mode.
2. Whereas cheap laptop LCDs work usually at not more then 60Hz, good screens possess 75Hz and sometimes 90Hz rates.
3. Only very old LCD screens (10+ years ago) had 50Hz of refresh rate maximum and could work utilising interlaced modes only.
4. The common notion states that any good LCD (not CRT) screen must render 60Hz refresh rate at least.
On smaller CRT monitors (~<14 inches) few people notice any discomfort below 60–72 Hz. On larger CRT monitors (~>17 inches) most people would experience mild discomfort unless the refresh is set to a more comfortable 85 Hz or higher. (http://en.wikipedia.org/wiki/Refresh_rate)
Some major manufactures consider 60Hz to be unsufficient, offering 75Hz-capable laptop screens.
5. Low refresh rate setting affects the LCD’s performance (see http://support.apple.com/kb/TA22119?viewlocale=en_US etc. etc.).
So, am I wrong? Or is the market wrong?
Are there any other laptops with 50Hz (interlaced) maximum refresh rate I'm not aware of?
I doubt if any.
Back on topic: with new X200s (1440x900), I have 90Hz (non-interlaced) on external 17" 1280x1024 Sony LCD monitor, and up to 100Hz on external 20" NEC LCD monitor (any resolution).
Both have a great picture.
50Hz interlaced is definitely the laptop screen limitation, not of the Intel 4 Series Express graphic adapter.
I've tried the older X200s (1280x800), which runs at 60Hz non-interlaced and does have a good stable picture.
Did Lenovo accomplish a product invention, or there is a sales pitch of cheap screens below standards?
BTW, in some countries LCD screens with refresh rates below 60Hz are prohibited by public health regulations.

Is it possible to display the transaction in display mode in portal?

Hi All,
I have created one transaction iview in portal say for eg: SE38.
i want to display this transaction in portal only in display mode so that users cannot edit/modify.
I checked with giving "Read" permission in portl to that iview. even though the user is able to change.
is this possible for the particular transaction to display only in display mode not as editable mode in portal?
Thanks,
vijaya.

Hi Vijaya,
Ask your basis team to create two user on R/3 system
1st with edit permission to that Tcode eg - SE38
2nd with only view permission to that tcode eg - SE38
Now will doing, user mapping in user administrator in portal
set 1st userid /password to whom u have to give edit permission for that Tcode and set 2nd userid /password to portal user whom u want to just have read access for that tcode...
Hope this solves ur problem...
Please reward Points if helpfull.
Thanks
Gunja

Se54 view cluster (display mode)

Hello, I created a view cluster and call it within sm34 transaction.
So, some users need to change that view cluster and some do not need to edit.
But even if I press display button in sm34 I can see Display -> Change icon, How can I make this button invisible.
In general I need to get 2 transaction:
1st -- for editing view cluster
2nd -- for displaying.
Please ask if I expressed my problem not correct.
Thank You

Kernal
I dont know if your problem solved or you still looking solution. What i can think about is you dont need to create any view cluster for display only. You can create views for that with display properties. Or if you need VC then embedd these views there you shouldnot able to edit as these will be only in display mode.
Let me know if you got any other solution.
Regards
Ajay

Setting SPRO authorization only in disply mode

Hi,
I am working on authorization objects in anew role.. What is the name of the authorization object where I can set the activity for SPRO (Customzing) only in display mode ?
Thanks.
Regards,
Rajesh.

You dont need to do all this. Just create a role and add SPRO to it. Then maintain all the objects in that role to Display (Activity 03) ONLY.
However, this will not allow you access to all the zillion Tcodes that SPRO allows access to. In order to allow this, you will have to manually add ANOTHER S_TCODE object to that role and assign a * in it. So then you have access to all the Tcodes, but Display only.
This will do it for you. It did for me.
Edited by: Kunal Belnekar on Apr 1, 2008 2:53 PM
Edited by: Kunal Belnekar on Apr 1, 2008 2:54 PM

RSA1 in display mode

Hi all,
We have BI IDES version in our company, where lot of consultants are being trained in different aspects. Some have been using user sapuser. It was all ok from many months. But now all of a sudden, the create or edit,change icon and the activate icon is disabled. Means RSA1 is only in display mode. They are not able to create,activate anything. It has all authorizations. Please help. Consultants are waiting.
Thank a lot.
Regards
Vanitha

Hi!
The Problem is solved. I have replicated the BI source system and it is gone out of display mode.
Regards
Vanitha

Depriciation key and useful life periods in asset master should in display mode only

Hi all
At the time of creation asset master AS01 we are given the Asset class, company code and similar of asset (1) then we click enter button we will get Create asset: master data screen here in general tab we enter the description and in time dependent tab we enter cost center manually
But
When we click on Depreciation tab here the Depreciation key and use life fields are automatically come with Dep.key(ABC) and use life(15) (Because we maintained in OAYZ)
Here user have a chance to change the Dep.key(ABC) and use life(15).so my requirement is these two fields are display with only display mode .
User don’t have chance to modify this.

Hi Anil,
The screen layout for Asset and its depreciation tab are different. You have to make these fields as Display only in the screen layout. This can be done using T-Code AO21. Below are the screenshots for the path and screen layout for your reference. This should solve your issue
Regards
Pankaj Pareek

MacPro 1.1 boot only in safe mode with a non Apple display (NEC 24")

Months ago my original Apple Cinema has broken and I subtituted it with a 24" NEC Multisync LCD 2490WUXi with good results.
After some months, for cleaning purpose, I formatted the boot HD and reinstalled Snow Leopard.
Since then I can restart only in safe mode - the DVD also start only in safe mode otherwise after loading the screen is blank and shows only the mouse pointer.
I noted on System Profiler that no monitor is shown and both the DVI ports of the graphical card (NVIDIA Geforce 7300) result not connected!
I have to thing that such a monitor is not known and therefore, as I don't know where get the original one, can I use the Cinema Display 30" (but it has a minidisplay port not present on my card) and how?
Or it is better the substitution of the card having the minidisplay port? What type is compatible with Mac Pro 1.1 (2008)?
Or, in conclusion, I have to trash all and abandon Apple?
Many thanks for your appreciated suggestions.
Nerion

7300GTs are old in the tooth, there is a Boot Camp related firmware update that you should have seen in ASU.
The ATI 4870 - even flashed PC version - is one option.
I have seen other threads mention 7300.
I'd do the power off unplugged / power button for 10 second "Reset SMC" and see.
http://support.apple.com/kb/HT1436?viewlocale=en_US

Instance in READ ONLY mode - DISPLAY mode

Dear,
we dismissed and OLD SAP environment (4.6C), but due to the Italian law, we have to maintain it alive for 5 years more.
I would like to set it in "READ ONLY" mode.
Users could login in this OLD R/3 but, without changing their profiles, system must be set in DISPLAY mode.
Does anybody know a Tips & Tricks to put it in place?
Thanks
Andrea

You should change the users authorizations so that they cannot perform any changes to the system. Usually in cases like this only a limited number of users require access to the system so it shouldn't be too difficult to setup specific authorizations for read only access. I think this is the only choice you have.
Nelis

Requirement is OB52 should be in display mode only

Dear Experts,
In sap users profile sap_new is required but OB52 should be in come in display mode only on PRD system, How can I provide the t-code OB52 for Disply only.
Regards,
TVS

Hi,
If SAP_NEW given to any one,then we can't change it to display mode.OB52 is purely depend on type of
System.In PROD system it will come in change mode only.Where as in other Boxes like DEV/QAS,OB52 will be accessible depend on Client state(SCC4).
So I guess it is not possible in PROD box after giving SAP_NEW.
Rgds,
Durga.

SAP Instance in "only display" mode

Dear Guru,
do you have any idea how can I set my R/3 4.6C in display mode?
Shortly will be unavailable this old R/3 instance but for a small period we want to let this instance up and running but only in visualization mode, we want that all possible modification are not possible for final user;
I think that an instance without update process doesn't work properly also only for display functions;
Thanks
Best Regards
Daniele

Dear Saandip,
the system 4.6c that I want in "only display" for a short period has been integrated in other sap instance ECC 6.0 and the old system will be eliminated; but before of this cancellation we want to have the possibilities to see the data; also becouse in a big company it is possible that some users wrong to logon to the old system and working in that even if all or almost sapgui has been updated;
I think that with some particular instance parameter it is possible to do it; my first idea was to set at 0 the numbers of update process but I think that there is other problems whit this configuration;
Thanks
Best Regards
Daniele

SICF- only in display mode

Similar Messages

Maybe you are looking for