SICF Services - All active services and audit trail

We have upgraded one of our client environment from 4.7 to ECC 6.0 - Ehp4 and activated SICF services for Portal applications. We are using ESS, MSS, ECM and HR Admin for Portal and during setup we activated several services.
I was wondering if their is any way to find out all activated services and we can audit who activated all services from backend from ERP 6.0.
Thanks,
Miral.

As per SAP "Note 1555208 - ICF services become inactive after upgrade or SP update" we can find the list of active services along with path using the report RS_ICF_SERV_ADMIN_TASKS
SA38 --> RS_ICF_SERV_ADMIN_TASKS --> Export of Active Services into CSV file
Regards
Bhagirath

Similar Messages

Using wliconsole's process instance monitoring and audit trail

Hello,
I have couple of questions about wliconsole's process monitoring capabilities to be able to use in real production environments.
1. Is it possible to add some custom data to the Process Instance Summary table? For example, we would like to show the party that send the initial request, and some internal process type information.
2. How can we achieve audit trail logging when we have several processes? For example, we have business processes that span over several wli-processes, and our process is split into several re-usable sub-processes. And the audit trail stops at the process boundaries. Finding the corresponding sub-processes is quite a challenge now.
Thanks,
Timo Lukumaa
Reaktor Innovations www.ri.fi

The WLI version we're about to use is 8.1 sp2.
One question more:
3. Is there somekind of metadata or resource directory in wliconsole or some place else?
We're about use a SOA style architecture where re-usable business logic is modeled as web services.
So we would like to have one place (a web page) where the available services could be seen and corresponding WSDLs and schemas downloaded.
Or are we just looking at the wrong product? ;)
Thanks,
Timo

WLC/WCS Guest Access and Audit trail

I am currently using WLC version 4.2.112.0 and WCS version 5.0.56.2 and am looking for a way to keep an audit trail for assigned Guests rather than for the LobbyAdministrator creation and deletion of accouts...is this a feature of the WCS?
I know that i could use AD and use accounting portion of AAA of the radius server but is this function available on the WCS?

@Jacobt777 Thank you so much. Your solution took me about two seconds and the problem is fixed.
Should have checked this forum an hour ago when I was about ready to throw the phone against the wall, but i love my iphone too much.

BPEL console - cannot see the process audit trail and visual flow

Hi All,
The Visual Flow and Audit Trail for a BPEL is not appearing for me, when I log in to the BPEL console. Fortunately, the 'view as raw xml' screen is working, hence I am not completely helpless, but I would like to see the graphical representations of the process which is just not appearing.
I am on 10.1.2.0.0 with the 3 patches. Is anyone else also facing this issue? If yes, then has anybody found a solution?
Thanks,
Nilanshu

That's strange because I am using Internet Explorer. Maybe it is an installation issue or something. Let me try with Firefox. And if that does not work, I will probably uninstall the BPEL designer and re-install it. Hopefully, that would do the trick.
Thanks.

Audit Trail vs Audit Trail for Assignments for e-Recruiting

Hi,
We are using e-Recruiting on EHP3 sp05 so the administrator still has the BSP interface. On here there are two links one for Audit Trail and another for Audit Trail for Assignments. We can find data under Audit Trail (every time a status change activity is run it updates the audit trail), however we cannot find anything under Audit Trail for Assignments. Does anyone know what this is for and how you get this populated?
Many thanks
Tom

Hello,
I could find the below information on SAP Help. Please check if this is anyway useful.
The recruiting administrator can use the iView "Access Audit Trails" to get access to the Audit Trail of a candidate profile. The recruiting administrator can then search for candidates and call an overview of the data of the different profile versions. In addition to the profile versions, the recruiting administrator can also display the candidates' assignments that were derived from the search result
Procedure
       1.      In the services of your work overview, choose Access Audit Trails under Transaction Data Management.
       2.      Specify selection criteria such as the first and last name and e-mail address of the candidates for whom you want to view the audit trails and then choose Search. The system displays a list with the search results. If audit trails exist for a candidate, the system displays a link to each of them in the corresponding columns of the list.
       3.      Double-click an entry in these columns to open the relevant audit trail. The system displays a list with all versions of the audit trail.
       4.      Select a version by clicking it. The system displays the Data Overview of Candidate or the Data Overview of Assignment.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/f1/cc084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/erp2005_ehp_04/helpdata/EN/07/091c174ad74c6ba5f8011c9f78e839/frameset.htm
Best regards
G Raj

11g - Encrypt Payload shown in Audit Trail

How to encrypt payload that's shown in Audit Trail of Composite in 11g ? I want to encrypt information like SSN, that's coming as input to my composite service, so that its protected from support teams monitoring the logs and audit trail through EM console.
Is it possible to do this for whole composite or atleast within BPEL ?

Eric,
Is it possible to make the payload invisible or encrypted inside an 11g BPEL process? The policies will allow to encrypt the payload while sending to external services.
What if I have a simple BPEL process that uses simple Assign activity and I want to encrypt the payload so that Admin might not be able to comprehend it in the Audit Trail.
Audit level if set to Production can be changed by the Admin and hence is not a foolproof mechanism.
Regards,
Neeraj Sehgal

Active users and responsibilities r12

Is there a query for R12 of oracle EBS to list all active users and the responsibilities they have been assigned to? I only want to data to return the list of responsibilities for active users, i.e. those without an end_date.

The following query finds all the responsibilities that are assigned to a user. This query can be useful if you want to know if a user has a particular responsibility or any responsibility that has been end dated. However, if you just want to see the current "Active" responsibilities of the user, uncomment the "FURG.END_DATE" condition (very bottom line of the query).
In the following example, I used "AMOHSIN" as my user name to list all my responsibilities.
-- Query to find all responsibilities of a user
SELECT fu.user_name                "User Name",
frt.responsibility_name "Responsibility Name",
       furg.start_date             "Start Date",
       furg.end_date               "End Date",
       fr.responsibility_key       "Responsibility Key",
fa.application_short_name "Application Short Name"
FROM fnd_user_resp_groups_direct        furg,
       applsys.fnd_user                   fu,
applsys.fnd_responsibility_tl frt,
applsys.fnd_responsibility fr,
       applsys.fnd_application_tl         fat,
applsys.fnd_application fa
WHERE furg.user_id             = fu.user_id
AND furg.responsibility_id   = frt.responsibility_id
AND fr.responsibility_id     = frt.responsibility_id
AND fa.application_id        = fat.application_id
AND fr.application_id        = fat.application_id
AND frt.language             = USERENV('LANG')
AND UPPER(fu.user_name)      = UPPER('AMOHSIN') -- <change it>
-- AND (furg.end_date IS NULL OR furg.end_date >= TRUNC(SYSDATE))
ORDER BY frt.responsibility_name;
source:- Oracle Apps R12 Help: Query to find all responsibilities of a user
ApPsMaStI
sharing is Caring

Web Services and Custom Audit Trail

How do I access the "Custom Audit Trail" via web services. I do not mean the few audit fields that are on each object.
I specifically want to access this data related to the Opportunity record type, but other objects would have use also.
Thanx

I don't see anything in the documentation related to accessing this information but could be wrong.
Could you use a workflow to write a event anytime a Opportunity is changed and access what you need that way?

SICF Services to be activated for SRM 7.0

Hi Guys,
I am collecting list of all SICF services to be activated for SRM7.0
1) SAP -->BC -->WebDynpro -->sapsrm --> activate all services
2) SAP -->SAPSRM --> activate all services
3) SAP -->BC -->WebDynpro >SAP> POWL --> Activate services
4) SAP -->BC -->bsp -->sapsrm --> Activate services
Apart from this are there any other services to be activated for SRM 7.0?
Regards,
Ashish Shah

Hi Ashish,
Why dont you use the standard report W3PUBLISHALL for activating alll the SICF at once .. No harm in Publishing all SICF pages in SRM 7.0
Thanks
Iftekhar Alam

TS3992 i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.

I have just created this account to tell you that nothing would change if you restored your phone.
The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
So IMO, it's not what you should do to erase and restore your phone.
Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot.

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM

I updated my iphone and when it came time for activation it won't work and keeps telling me to try again. At the top it says "No Service" and I have my SIM card in and a good WiFi connection and have connected it through iTunes but it says I have no SIM card and need to disconnect and insert my SIM. I don't understand why this keeps happening and it's been going on for a wile now. I have tried over and over again to get this iPhone to work but nothig is happening. I've even gone on the website for support (apple.com/support) but cannot find anything that will help me with this situation. Can someone please help me find a solution to this problem? I have been without a phone and do not have money to buy another one and it is crucial for me to get it fixed. Thanks.

wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
Thanks

You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars

HT204053 I changed my Apple ID on all my devices and Apple services but iCloud still shows my old Apple ID. How can I get it to update?

I changed my Apple ID on all my devices and services but iCloud still shows my old Apple ID. How can I get it to update?

I asked the Apple Tech support people and their advice worked for me, it's a setting on the iPad itself. see below.
Follow the below instructions to sign in with your new account name.
1) From the home screen, tap Settings
2) Tap Store
3) Tap Sign Out
4) Tap Sign In
5) Enter your current account name "xxxx" and your password and tap OK.
If you are still unable to change the sign in name on your iPad, please sign into your account on your computer and then sync the iPad so the changes will be updated.
good luck

How can i see when someone has accessed my call/text log. (This is possible on google) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in

How can i see when someone has accessed my call/text log. (This is possible on google/gmail) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in persuing that further. I just need to see when my account has been accessed if possible.

Hi lynniewigs,
This is a common concern among Android and I-phone user, and one of the drawbacks to using a smart phone. We lose so much privacy. Our phones become cameras into our homes for us to be spied on.
I don't know what type of phone you have, if it is even a smart phone, but here is an example of an application that you can use to determine which applications are accessing your information and sending it out.
Permission Scanner - Android Apps on Google Play
Google just recently revamp their permissions geared to hide invasive applications that spy and send out your information without your knowledge. Report says be aware of what your Android app does - CNET
Please continue to be mindful of the apps you download and the permissions you give.

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it a

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it actually says not moblie network available, when everyone else in my family has coverage and are on my plan with iphones. I am missing text messages and dropping calls left and right. This is unacceptable for the cost of this phone and my service. I have did a hard reset etc. What else can I do??

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

SICF Services - All active services and audit trail

Similar Messages

Maybe you are looking for