SICF - Test Service

Hi,
In the SICF, during test service of SAP/XI/Engine, I am getting the following error:
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Pipeline specified in URL attribute (type) not existing</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code>
<SAP:P1>/sap/xi/engine?sap-client=100</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline ID which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=100)</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
Could anyone please help me in resolving this issue?
Thank you in anticipation

Hi Andrews,
When tried testing from the SICF, the url shown is http://yhsapdev05:8000/sap/xi/engine?sap-client=100, but I understand that this should be changed to http://yhsapdev05:8000/sap/xi/engine?type=entry.
How to change this configuration?

Similar Messages

Test service not working in SICF

Hi All,
In SICF transaction, after activating the /default_host/sap/bc/srt/IDoc service and when we give test service it shows "500 Internel Server Error."
Please help
Thanks,
Preetha Balan

Hello Preetha,
although it is an old post:
if you start transaction ST11 and look for the youngest file dev_icf<nr> you may find messages in it telling you about nodes which still are deactivated but have to be active for a successful test of your desired service.
Kind regards,
Jens

BBPSTART giving ERROR URL in Test Services in SE80

Hi All,
Iam getting following error , I have all checked all basic settings
ICM is running,FQDN is maintained, site INTERNAL is active, Services SYSTEM,SHUFFLER,WEBGUI published.
Service cannot be reached
What has happened?
URL http:/e.g Error URL// call was terminated because the corresponding service is not available.
Note
The termination occurred in system 000 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:pq09a000_ET2_49-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
Thanks & Regards,
Gopal

Hi Raja,
Yes,we have activated the BBPSTART also in SICF, still we are getting following error when i activate TEST SERVICES for BBPSTART.
The URL http://et2app49.esc.win.xxxxxx.com:8049/sap/bc/gui/sap/its/bbpstart was not called due to an error.
Note
The following error text was processed in the system ET2 : Error message occurred.
The error occurred on the application server pq09a000_ET2_49 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPMSYST
Error code: ICF-IE-http -c: 021 -u: USILM00 -l: E -s: ET2 -i: pq09a000_ET2_49 -w: 0 -d: 20060724 -t: 040121 -v: RABAX_STATE -e: ITS_ERRMSG_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Also,when i checked the ST22 dump , iam getting ITS_ERRMSG_EXCEPTION error message.
Thanks & Regards,
Gopal

Error in testing Service RS_BCT_XA_X_GET_ROLES

Dear Experts,
While i try to test to service RS_BCT_XA_X_GET_ROLES in SICF, i am getting the below mentioned error, please help.
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
<soap-env:Header />
- <soap-env:Body>
- <soap-env:Fault>
<faultcode>soap-env:Server</faultcode>
<faultstring xml:lang="en">SRT: Wrong Content-Type and empty HTTP-Body received: ("HTTP Code 200 : OK")</faultstring>
- <detail>
- <ns:SystemFault xmlns:ns="http://www.sap.com/webas/710/soap/runtime/abap/fault/system/">
<Host>undefined</Host>
<Component>COREMSG</Component>
- <ChainedException>
<Exception_Name>CX_SOAP_CORE</Exception_Name>
<Exception_Text>SRT: Wrong Content-Type and empty HTTP-Body received: ("HTTP Code 200 : OK")</Exception_Text>
</ChainedException>
</ns:SystemFault>
</detail>
</soap-env:Fault>
</soap-env:Body>
</soap-env:Envelope>
Regards,
Satish

Hi Rohit,
This is the message i am getting when i tried to test service from WSADMIN.
Cannot download WSDL from http://blrkec142276d.ad.infosys.com:8000/sap/bc/srt/rfc/sap/RS_BCT_XA_X_GET_ROLES?sap-client=001&wsdl=1.1: It is not allowed to access this service. If you believe you should be able to, please contact your system administrator
Regards,
Satish

ITSMobile00 test service keep asking to logon

Hi,
We are on ECC 6.0 With Basis SP 13. I published ITSMOBILE and ITSGENMOBILE in SE80
to INTERNAL. In SICF, when I perform a test service on itsmobile00, it gives me a logon screen,
I enter the data but it does not move from there. It keeps asking me the user id/password.
The login details are correct and the user is not locked. Any suggestions
Thanks.
Ravi

Dear Ravi,
Please check out these links, you may find something:
https://wiki.sdn.sap.com/wiki/display/HOME/ITSmobile
Internet Transaction Server
Please mark this thread as answered if my post solves/ leads you to solve your question.
Regards,
Veera

Correct idea to scale out testing environment and test service pack2 installation

Hi
I have a sharepoint 2010 farm it has one sharepoint server, one database server
In one server below services are running
Central administration service
SharePoint Server Search
User Profile Service
Microsoft SharePoint Foundation Web Application
so i want to scale out this form to
1 application server
1 web front end server
1 Search server (index server)
1 databse server
here how i scale out to this form
1)here how i move sharepoint server search service to new index server and
2) here how i move Microsoft SharePoint Foundation Web Application to new webfront end server
and in this single server some web appllications are running also how i move these to new wf server
i want to do like this because i want to test service pack 2 installation, now sharepoint version is : service pack1
my actual production environment has
2 application servers
2 webfront end servers
2 index servers
1 databae server
so this correct idea to scale out testing environment and test service pack2 installation
adil

Hi Adil,
The link below describes how to scale SharePoint Web Front-End with only web applications and the search query server out of one SharePoint server with all roles running.
http://sharepointsolutions.com/sharepoint-help/blog/2011/02/how-to-scale-out-a-sharepoint-2010-farm-from-two-tier-to-three-tier-by-adding-a-dedicated-application-server/
Now you have two SharePoint server with:
Tier 1 – SharePoint Server dedicated as a Web Front-End (WFE) with only the web application(s) and the search query service running on it
Tier 2 – SharePoint Server dedicated as an Application Server with all of the other service applications running on it, but no web applications or query service
Tier 3 – SQL Server for the databases
Then you would scale out WFE server with web applications from tier1. Now please install a new SharePoint server and join it to the existing farm and deploy it as Web Front Server. Enable the relevant services on Web Front servers per the topology picture
below, and stop the services running on the old server.
http://technet.microsoft.com/en-us/library/cc263044(v=office.14).aspx
Regards
Rebecca Tu
TechNet Community Support

Error while testing Service enabled Application module-ADF11g

Hi All,
I am facing an error while testing Service enabled Application module.I have followed the documentation avaialble in this link
http://download.oracle.com/docs/cd/E14571_01/web.1111/b31974/bcextservices.htm#CJABABJE.
All the supporting jar files are included in the calling application, but still I am getting class not found exception.
Error is as follows…
JBO-29000: Unexpected exception caught: java.lang.RuntimeException, msg=java.lang.RuntimeException: java.lang.ClassNotFoundException: demo.model.common.serviceinterface.AppModuleService: java.lang.RuntimeException: java.lang.ClassNotFoundException: demo.model.common.serviceinterface.AppModuleService
Jdev version is 11.1.1.2.0 and
Build JDEVADF_11.1.1.2.0_GENERIC_091029.2229.5536
Any pointers for the same is highly appreciated.
Thanks,
Anusha

Hi Willian,
Did you set up your "Model" Project to use the JDK 1.4 and rebuild the application ?
See " [Deploying to Application Servers That Support JDK 1.4|http://tinyurl.com/lfc6kc] "
Regards,
Didier.

Adapter_plain and engine error during test service

Hi All,
Am not able to test the adapter_plain service under default_host->sap->xi. When i do a Test Service i get an Action Cancelled page with the url http://iscsapapp4w:8010/sap/xi/adapter_plain?sap-client=100
I checked the Pipeline URL parameters in SLD for my Integration Server BS, httpport setting in eXhangeProfile and specific confirmations IS_URL parameter in sxmb_adm.
And i get the following error when i Test default_host->sap->xi->engine
Pipeline ID which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=100)

Synchronous RFC
1. CALL FUNCTION func DESTINATION dest
                     parameter_list.
Asynchronous RFC
2. CALL FUNCTION func STARTING NEW TASK task
                [DESTINATION {dest|{IN GROUP {group|DEFAULT}}}]
                parameter_list
                [{PERFORMING subr}|{CALLING meth} ON END OF TASK].
Transactional RFC
3. CALL FUNCTION func IN BACKGROUND TASK
                     [DESTINATION dest]
                     parameter_list
                     [AS SEPARATE UNIT].
Use help function of your ABAP editor for more details.
Regards
Stefan

I have an "Untitled" test service that no longer exists in Library/Services/ but still loads in the context menu and finder services menu. How do I get rid of it?

I created an "Untitled" test service, then deleted it. It no longer exists in Library/Services/ but still loads in the context menu and finder services menu. Reboots do not change the behavior. How do I get rid of it?

... and mysteriously, it's gone again. Multiple reboots across the day between then and now, plus a few hibernations as I moved about. It's as if Finder cached the [deleted!] workflow file and continued to operate off of the cache for an indeterminate time....

Test Service Provider throwing an error u201CAn Error occurred during serializa

Hi Experts,
Pl. help me out to solve this error.
When I test my service in Test Service Provider, it is throwing an error u201CAn Error occurred during serialization in the simple transformation program /1Sal/TASC6F348B109136617F160u201D.
Thanks & Regards
T.Tamodarane

Hi,
Serialization error occurs when you are passing some invalid values.
Example: characters is a numeric field.
Kindly check your input once.
Regards,
Vikas

Test Service: SODIS_CORE_WBO (SODIS- Core Workbench Organizer) Failed

Deart Experts!
I already configured Solution Manager EHP1 as Domain to using CTS + .
When I active the Service: SODIS_CORE_WBO then select Test Service the errors occured as below:
Error when processing your request
What has happened?
The URL http://pit-pilot05.pitvn.com:8000/sap/bc/webdynpro/sap/sodis_core_wbo was not called due to an error.
Please help me resolved this problem .
Thank you very much.

Hi Thao,
If you have EhP1, I believe the service SODIS_CORE_WBO was replaced by CTS_BROWSER.
Please also refer to SAP Note 1145268 for more details.
Hope it helps.
Regards,
Dao
Edited by: Dao Ha on Jul 23, 2010 8:22 AM

Lync Server Audio Test Service won't start

Hi,
I am unable to start the audio test service on my Lync 2013 server.
Running the command Get-CsAudioTestServiceApplication returns a warning: "RegistrarPool" with the identity "1351738413" assigned to "sip:RtcApplication-bunch of numbers and letters@domain" has been removed from the configuration
store.
So I'm guessing the fact is it is looking at the incorrect Registrar Pool but I am unsure on how to change that.
I'm not sure if this is related but the Lync Server Event log is full of this error
Log Name:      Lync Server
Source:        LS Call Park Service
Date:          13/09/2013 8:47:28 AM
Event ID:      31035
Task Category: (2002)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      PLYNC01.gwmwater.org.au
Description:
Time-out getting primary application end point.
Error: No provisioning data received for the primary application contact within the time frame specified.
Cause: The server could not get primary application.
Resolution:
Check if Call Park Service contact object exists in Central Management Store (CMS) and in Active Directory.
Event Xml:
< Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="LS Call Park Service" />
    <EventID Qualifiers="51154">31035</EventID>
    <Level>2</Level>
    <Task>2002</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-09-12T22:47:28.000000000Z" />
    <EventRecordID>1617</EventRecordID>
    <Channel>Lync Server</Channel>
    <Computer>PLYNC01.gwmwater.org.au</Computer>
    <Security />
</System>
<EventData>
    <Data>No provisioning data received for the primary application contact within the time frame specified.</Data>
</EventData>
< /Event>
Any help would be great.
Thanks
Todd

The solution is in Portuguese but easy to understand:
http://www.wellingtonagapto.org/2014/08/audio-test-service-nao-inicia-no-lync-server-2013-event-id-32003.html
Wellington Agápto
Consultor de Comunicações Unificadas & Mobilidade
ITIL, CCNA, MCP, MTA, MCITP, MCTS, MCSA, MCSE Communication
Edefense Segurança Digital
Site: http://www.edefense.com.br
Blog: http://www.wellingtonagapto.org

SICF customer service in order to retrieve PDF document from archive (ICC)

All,
I am currently trying to set up a scenario to integrate SAP-VIM (vendor invoice management) with the ICC (invoice capture center; from opentext). In this process the ICC application loads data from SAP together with a scanned invoice (in PDF format) stored in our archive.
Since we are not using any sap-certified archive solution I had to build the data retrieval via custom programming. But when the ICC component is trying to upload the data I am getting following error: "Error while trying to get invoice image(s) and recognition results from SAP: Unable to load datapool. Data at the root level is invalid. Line 1, position 1." Did someone have experience with this kind of set-up of with the error?
Steps done:
- create a Z-service in SICF with own class (based on copy of CL_HTTP_EXT_CSIF)
- inside this class programmed to data retrieval of the PDF document of the archive (in Base64 format or Binary format)
- filling the header fields of the response via
l_mimetype = 'application/pdf'.
call method l_entity->set_header_field:
    exporting name = 'Content-Type'      value = l_mimetype,
    exporting name = 'Content-Length' value = l_size_s,
    exporting name = 'pVersion'        value = l_pversion,
call method l_entity->set_data
    EXPORTING
      data   = l_data
      offset = '0'
      length = l_length.
l_data = binary data of PDF-file
Best Regards,
Kris

831692 wrote:
Hello everyone,
I'm using BI Publisher 11g to generate PDF documents. I had implemented a servlet that uses HTTP POST/GET to simulate the behaviour of BIP console since ScheduleReport Service is not implemented in this version. The problem is about the output of the final documents when i'm not using the bursting option. From my experience, the documents are not saved in any temporary folder in the filesystem. Looking at DEV_BIPLATFORM schema and analysing XMLP_* tables, i'm assuming that the generated document data is the BLOB DATA field in the XMLP_SCHED_DATA table...this is right?
Next, in java, i'm using the BLOB field to output his binary content to a PDF file but, when i try to open the file, it gives an error: "document may be damaged"...
Any suggestions here would be appreciated...
Thanks in Advance
Regards,
NP1. Yes, it contains the output document.
2. If the output type is PDF then the BLOB contains a zip file which contains the PDF document.
So first unzip it before rendering
Cheers
Jorge
p.s. If your question is answered then please grant the points and close the thread

Application Server Control - Test Service asks to authenticate when Stress

Hi,
OAS 10.1.3.4
When we go to test a Web Service and then select the Stress Test Option we get asked to authenticate to the application server when the Invoke button is selected. If I perform a stress test from BPEL Console for the same BPEL process there is no issue and it runs fine. This seems to happen in ASC for BPEL, ESB and Java Web Services.
Same problems on different servers, so doesn't look like a particular install issue.
Has anyone experienced the same behaviour or know of a workaround as we need to stress test more than just BPEL processes?
Thanks

I think this is a normal behavior if you are not using SSO, because for every applicaiton you access you will have to enter username and password, but for BPEL console you have been already entered this password so it doesn't ask for it again because is like an internal object, but for EM console, you are accessing and external object that needs authentification.
Regards.

Testing Services in SOAPUI

Hello,
I want to test webservices in SOAP UI. The services are provided in an abap backend, and will be consumed in a 3rd party system. The communication is via an integration server. I created . In WS navigator the service can be tested succesfully. In SOAPUI the WSDL URL is providing me the interface description - but when I try to execute it, I get an error saying "error getting response; java.net.ConnectException: Connection refused: connect". In SOAPUI the tool tip of the WSDL URL says "no endpoint set for request". Is it an autheification problem? Does anybody have a suggestion?
Kind Regards
Felix

The URL looks similar, but there are differences...:
https:// <piHostname> :50001/XISOAPAdapter/MessageServlet?senderParty=&senderService= <Business Component> &receiverParty=&receiverService=&interface= <Interface_out> &interfaceNamespace= <namespace>
Apart from <piHostname>, <Business Component>, <interface_out> and <namespace> this is the original URL. Something missing?

SICF - Test Service

Similar Messages

Maybe you are looking for