Sicf transaction is deactivated

hi,
If the XI component within this transaction is deactivated can messages still be sent to XI via ABAP proxy?
On one of the server this is switched off so trying to understand if possible to use XI as a service is switched off!
early response will be appriciated.
thanks and regards,
KRUSHI

Hi KRUSHI ,
NO,
As of my knowledge it should be activated first.
Regards,
Ramesh.

Similar Messages

  • Steps to create  service in   SICF   transaction

    hi..
    steps to create  service in   SICF   transaction
    thank you.

    hi
    good
    go through this link
    http://help.sap.com/saphelp_nw70/helpdata/en/78/9852aec06b11d4ad310000e83539c3/frameset.htm
    thanks
    mrutyun^
    null

  • Setting in SICF transaction

    Hi All,
    I have activated the standard service "WEBGUI" in SICF transaction. It has generated URL.
    Now I want to transaport the settings done in SICF transaction to activate WEBGUI on quality server.
    But during activation on development server, system has not asked the request no.
    So can anyone tell me how to transport the settings done in SICF transaction or do we have to do SICF service activation settings on each server i.e. on quality, development etc?
    Kindly do reply as it is very urgent.
    Regards,
    Pranjali

    to transport the setting of the SICF service, select the service and then in the menu go to ->object directory entry to attach it to a transport request.
    also note that after transporting, by default the services will be in inactive state and you have to manually activate them.
    Regards
    Raja

  • IDOC_XML Service in SICF Transaction

    Hello Everybody,
    I want to use IDOC_XML Service in SICF Transaction.
    Anybody has idea how to use this Service?
    I want to know the parameters required to call this service outside and the content structure of the Posted data to this Service.
    Its very urgent. so, if anybody has idea then please help me.
    Regards,
    Bhavik

    Hi,
    You might want to have a look at this Exposing IDoc as Webservice.
    Hope that helps (please reward me if it does ,
    Joerg

  • Transportation of settings done in SICF transaction

    Hi All,
      I have activated the standard service "WEBGUI" in SICF transaction. It has generated URL.
      Now I want to transaport the settings done in SICF transaction to activate WEBGUI on quality server.
      But during activation on development server, system has not asked the request no.
      So can anyone tell me how to transport the settings done in SICF transaction or do we have to do SICF service activation settings on each server i.e. on quality, development etc?
      Kindly do reply as it is very urgent.
    Regards,
    Pranjali

    Hi
    You can transport a webservice using SE80. But for activation, you have to go to the system ans activate that.
    Because SAP also provides the services in the "inactive" state and also you have to individually maintain the settings for the webservices.

  • Appl_soap_management not found in SICF transaction

    Hello All
    In SP14 the WSADMIN transaction is obsolute so we are using SOAMANAGER transaction to create web service.To use this transaction we have to activate the appl_soap_management service in SICF but we can not find this service there.
    Please let me know what is the problem .
    Thanks
    Sonal

    Hi Sonal,
    Sorry to asking this but I am also facing same as WSADMIN says its obsolete and appl_soap_management node is not there inside SICF.
    I am wondering, how did you manage to solve this issue and make this soamanager t-code run in the system.
    I am surprised that tcode exists but the related web dynpro application does not exist.
    Any clue will be highly appreciated. Thanks.
    Regards,

  • SICF transaction and services changes

    Is there any change control features for services found via SICF?
    every time we do support packs one of our services gets overlaid and it is a manual effort to resolve.
    is there no spdd or spau functionality for services? any help is appreciated
    thank you

    Hi Sandeep,
    What is the version of SAP ?
    Can you give 1 example of your problem.
    Thanks
    Anil

  • Run time error while testing a service through transaction SICF/SOAMANAGER

    Hi all,
    We created a service for publishing the function module in web services through WSDL. When we try to test the service using SICF transaction / SOAMANAGER transaction, we get a run time error.
    We are not sure whether any other  settings or steps required for testing the web services..
    Could you please let us know which steps/configurations we are missing?
    Details of the run time error.
    Service cannot be reached
    What has happened?
    URL http://in.ap1.sy.com:8000/wsnavigator call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system ECC with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:J-i:INSISCSAPIDES_ECC_00-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    Thanks
    Siva

    Please ask you Basis admin to perform the following.
    1) Check wether the Java Stack ( Portal, BI system etc) is avaliable in your landscape.
    2) Execute tcode SOAMANAGER in ECC system. This will take you to a new browser where you have to login with your SAP username and password. Under SOA MANAGEMENT you can see Technical Configuration tab>click on System Global Settings>and select Access Information J2EE server. Here provide the hostname and the port number. Save the entries.
    3)Execute tcode SMICM>Goto>Services. Here you can check for the HTTP Service Name/Port number
    4) Activate the required services from tcode SICF
    Thanks,
    Sridhar

  • Error when creating Service for transaction in SICF.

    Hi,
    I created a Transaction, and for this transaction transaction I am trying to create a service for this transaction using SICF transaction.
    but after creagting service when I am doing test service I am gettging error follwoing message - can any one please let me know how to solve this issue.
    The following error text was processed in the system DP2 : Communication failure
    The error occurred on the application server dp2dca0u_DP2_01 and in the work process 0 .
    The termination type was: IMC_CANCEL_TX
    The ABAP call stack was:
    Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_ITS===============CP
    Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
    Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
    Module: %_HTTP_START of program SAPMHTTP
    Thanks.
    Rajesh.

    Hi,
    First you need to publish your service which you would get from the dropdown fro utilities->setting->its->publish.
    Also check in transaction SICF whether your serivce is actiavted- else activate the same. you can find your serivice under the following path
    default_host/sap/bc/gui/sap/its/
    ITS Debugger
    http://help.sap.com/saphelp_47x200/helpdata/en/5f/1fbd2f4aee11d189740000e8322d00/frameset.htm
    Debugging Flow Logic Applications
    http://help.sap.com/saphelp_47x200/helpdata/en/d1/7033b4ae5d11d3806500c04f99fbf0/frameset.htm
    ~rfcDebugging
    http://help.sap.com/saphelp_47x200/helpdata/en/5f/1fbbb14aee11d189740000e8322d00/frameset.htm
    Debugging WebRFC Applications
    http://help.sap.com/saphelp_47x200/helpdata/en/2b/d9211d4b8a11d1894c0000e8323c4f/frameset.htm
    Hope that helps,
    Regards,
    Gopal
    Edited by: Gopal on Oct 30, 2008 3:23 PM

  • Test service not working in SICF

    Hi All,
    In SICF transaction, after activating the /default_host/sap/bc/srt/IDoc service and when we give test service it shows "500 Internel Server Error."
    Please help
    Thanks,
    Preetha Balan

    Hello Preetha,
    although it is an old post:
    if you start transaction ST11 and look for the youngest file dev_icf<nr> you may find messages in it telling you about nodes which still are deactivated but have to be active for a successful test of your desired service.
    Kind regards,
    Jens

  • Problem in gui of ITS transaction

    hi everyone
    My problem is that on executing a transaction ie bmbc via r/3 system gives one output ie it lists the batches whereas if i see the same transaction via ITS in the SICF transaction>sap>gui>its (test services) the navigation area takes most of the screen is there a way to set the screen size such that it is similar to the one generated in the r/3 system output.
    points will be awarded
    thanks & regards
    Jaspreet Kaur

    Hello Jaspreet,
    this seems to be a bug in the ITS/webgui. I just saw this...
    I recommend to create an OSS trouble ticket.
    best regards
    Tobias
    P.S.: Please write my name as a possible processor into
    the ticket, this is definitely a development problem.
    Message was edited by:
            Tobias Gomer

  • SAP Transaction in EP iView

    Hi,
    I am trying to create a SAP Transaction iView in EP.
    When using SAP GUI for HTML i am getting the error as
    <b>Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    Application URL ':///webgui/!' is not valid! Please check the protocol and host entries for system</b>
    When I try with SAP GUI for Windows, I get "<b>Connection to partner broken</b>" error.
    I am also not able to get the desired result with SAP GUI for Java.
    Can anyone please throw some light on this?

    Hi Suprita,
    If i am not mistaken, Integrated ITS will coem with BASIS 6.40.
    If you basis version is 6.40 then ITS will be avialable in R/3 system.
    Check the Integrated ITS is enable and the necessary settings have been done in transaction SICF, The ITS will come as a service, and also enable all the services in SICF transaction.
    Check the Connection test of your Integrated ITS, if it is not available in SICF transaction then you may need to install the ITS seperately. The error you are getting is because, may be the ITS parameters are wrong.
    Hope this helps.
    Regards
    Sumanth
    Regards
    Sumanth

  • SICF- Services in Portal

    Hi
    My basis guy wants to know the services for the following transactions getting displayed as iViews in the portal
    Accounts Plan (CRM PCUI               appl=CRMD_BUS2000111      blview=ZACCT_PLANS
    Accounts Profiles (CRM PCUI)         appl=CRMM_ACCOUNT         blview=ZSALES
    Contacts - Common (CRM PCUI)     appl=CRMM_CONTACT         blview=ZSALES
    Opportunities - AVP (CRM PCUI)      appl=CRMD_BUS2000111      blview=ZAVP
    Opportunities - MGR (CRM PCUI)     appl=CRMD_BUS2000111      blview=ZMGR
    Opportunities - REP (CRM PCUI)      appl=CRMD_BUS2000111      blview=ZSALES
    Could you tell me which ones will be the relevant services in SICF transaction.
    Thanks
    Tarang

    Hi,
    Go through these sap files for information:
    Creating and Configuring an SICF Service -
    http://help.sap.com/saphelp_nw04/helpdata/en/55/33a83e370cc414e10000000a114084/frameset.htm
    Authorization in SICF
    http://help.sap.com/saphelp_nw2004s/helpdata/en/52/a6863f445f4617e10000000a114084/frameset.htm
    http://www.*********************/was_security.htm

  • Where is the customer number(KUNNR) stored in VBO3 transaction??

    Where/In which Transparent Table is the customer number(KUNNR) stored in VBO3 transaction??
    In VBO3 transaction>>Enter some agreement number>>press enter>>Click on Condition button>>select some value and proceed.
    Here you will find Customer number(Kunnr).Please tell me,in which table is this value stored??Kindly tell me the procedure to find the same so that I can find In which transparent table others fields stored on this screen......:)
    Regards,
    Shashank.

    dear shashank,
    1.  just go to the screen and -
    > click f1 -
    > then technical details
    > click on dataelement -
    > double click on data element
    > then check menu bar -
    > utilities -
    > where used list
    you will find some tables ... so these are the main tables
    2. or other wise go to st05 ,
        activate trace
       do the transaction
       and deactive trace
       and check the details in that u can view tables from that you have to see in which table it is updating..

  • SICF- Service for Portal

    Hi
    My basis guy wants to know the services for the following transactions getting displayed as iViews in the portal
    Accounts Plan (CRM PCUI               appl=CRMD_BUS2000111      blview=ZACCT_PLANS
    Accounts Profiles (CRM PCUI)         appl=CRMM_ACCOUNT         blview=ZSALES
    Contacts - Common (CRM PCUI)     appl=CRMM_CONTACT         blview=ZSALES
    Opportunities - AVP (CRM PCUI)      appl=CRMD_BUS2000111      blview=ZAVP
    Opportunities - MGR (CRM PCUI)     appl=CRMD_BUS2000111      blview=ZMGR
    Opportunities - REP (CRM PCUI)      appl=CRMD_BUS2000111      blview=ZSALES
    Could you tell me which ones will be the relevant services in SICF transaction.
    Thanks
    Tarang

    Hi,
    Can anyone share pointer on this.
    As this error is coming in Succession Planing in Talent Development Buss Pkg in Portal
    And subsequent service for this hrrcf_start_int is not getting run properly in ECC system.
    Regards,
    SK

Maybe you are looking for

  • How can I import DVD footage in Final Cut Pro X

    I want to edit a showreel of my own work in Final Cut Pro X (version 10.1.4). A lot of my old footage is only available on DVD. I need to get this footage into Final Cut Pro X but don't know how to do this. There are programs to convert DVD to DV but

  • How can I install facebook on iPhone3?

    how can I install facebook on iPhone3

  • AR/AP Control account

    hi folks, in which table we can find the Reconciliation Account list for AP/AR? thanks in advance

  • Missing Account document

    Hello We made an debitor invoice with 647 lines, but SAP didn't made an account document this time:  The accounting document has not yet been created - VF062. Can anyone help us? Regards Lone

  • Scenario to the users agent.

    Hello, For ATG 9.1 is there a way to setup a Scenario to know if the user is coming via a smartphone/tablet or notebook ? Basically get access of the browser's agent ?