Sick Ipod one minute, starting normally the next, plus gray scratches

Okay I am not sure which ipod I have. I do know it was the ipod which does not play full length movies and does not have the widescreen. About a month ago I noticed what appeared to be a scratch in the picture of the ipod screen, not a regular scratch and no surface scratch which could have inflicted it. For lack of better explanation it looked like it had been scratched from the inside. When I moved the click wheel the screen would light up as usual except for the spaces where it appeared to be scratched. They would appear gray/multicolored marks. At first I was freaking out since the scratching was pronounced and plugged my ipod into a wall charger hoping it would fix it to see some of the scratches fade but come back again off and on. Just today I was driving in my car about to listen to my ipod when it was working normally. I believe I left my car to run into a store and when I tried to turn the ipod on I saw an image of an ipod with x's for eyes and a sick look. I just tried again so I could accurately describe it and my ipod started up normally and I havent' charged it again or plugged it into any power source. Any ideas guys? I have a feeling I'll take it into APPLE anyway because this is too weird.

I would try:
- Another cable
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- on another computer to help deptermine if yo have an iPod or computer problem
- If a computer problem then:
- You can either backup your data and do a fresh install of Windows
- Restore your Windows to an earlier point i in before the problem started
- Wait for an update to iTunes
Yes yo can use a program like iFunBox to manually copy music and some other things to and from the iPod and computer.
Downgrading the iOS is not supported by Apple

Similar Messages

  • Computer will recognize iPOD one minute but not the next!

    I have the 60GB iPOD and have tried everything to get my computer to recognize it. I have a laptop running on Windows XP. It will recognize the iPod in the Itunes and on the computer for only minutes at a time, but then clicks off and loses the connection to my computer and won't come back until I restart my computer. Anyone have any useful information for this headache?!

    Hi I have had similar problems with the ipod but think I know the problem without being techincal.
    My Ipod sometimes would connect and sometimes not. I could not find a pattern besides a random one. However I looked at "my Computer" view where I could see the hardisks. When the ipod connected with a "removable disk" it would not work with Ipod and you could not get access to it.
    Then I tiried and tried (always on the usb on the back of the computer) changing between the two connections.
    When the computer then recognized it as the name I have given the ipod "JFR IPOD" it would then work with I tunes without any problems.
    However .... this is the trick for me... when using the USB on my laptop and my wifes it works without any problems 20 out of 20 times....... Where I can see the Ipod in "my computer" as a disk named as my ipod and NOT just as removable disk.
    This concludes for me that the USB on my computer - which is USB2 on a 3 year computer does not work as it should. I again assume that this is due to the fact that the IPOD is not powered by a remote source while being connected. This due to the fact that Maxtor USB2 transporable harddrives works without any problems whatsoever.
    I now need to check if an external USB2 HUB with external powersupply will work on my computer. If that is not the case I need to try a Firewire connection and have it installed as a card.
    All this was done by Trial and error but know I know that (apparently) is not due to a misfunctioning ipod.
    Hope this helps for some of you. Bring the IPOD to a fairly new computer and connect is. If it then connects as a ipod with the name you have given it it will work with Itimes as well.
    Best Regards,
    John Frandsen.

  • HT6154 My iphone randomly turned off out of nowhere. I was getting dressed, my phone was working one minute then literally the next it syopped now it wont charge i cant turn it on however the phone is on cause i called it and it rang. What to do? help ple

    My iphone randomly turned off out of nowhere. I was getting dressed, my phone was working one minute then literally the next it syopped now it wont charge i cant turn it on however the phone is on cause i called it and it rang. What to do? help please. I tried putting it in DFU mode but my lock button doesnt work and my phone wont charge so i cant connect to itunes

    There is no reason to put it in DFU mode, a reset should work.  Although, without a working power button it is not possible to reset the device.
    Sounds like it is time to replace the damaged device.

  • Ipad screen went white with gray/black line through it. Worked one minute and not the next. It has not been jailbroken.

    The ipad screen has went white and has a gray line running through the middle of it. It worked one minute and not the next. It has not been jail broken.

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

  • Podcast Works on a web browser one minute and not the next.

    We are having an issue with a Podcast working on Safari/Firefox one minute and not the next. Our teachers add Podcast to their web pages and then post it on our web server. Teachers, using Safari and Firefox, maybe able to open their podcast one day and then not the next. Has anyone had this problem? We have the most up-to-date Quicktime. Any information would be helpful.
    We are running 10.4.9 on a Macbook.
    Thank you,
    Jennifer

    Have you tried restarting or resetting your iPad?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

  • My facetime and imessage are not working! They were literally were working one minute and not the next!  I have reset (NOT RESTORED) my ipod, however these 2 apple apps are not working now, anyone have any idea why???

    My ipod touch seems to have a few issues, however my pre-installed and updated imessage and facetime were literally working last night, and after a breif break to charge battery (the back of the ipod was SUPER HOT) wasn't able to do facetime or imessage, and am STILL NOT today, what gives?? Any suggestions and advice?.

    Found the answer, at least for now!  Thanks to roryjt, and having to search through tons of post on imessage and facetime issues!  Changed the DNS on my ipod for my wireless network to 8.8.8.8   Not sure if it will work outside of my wireless network, but since its an ipod, not an iphone, I usually only use it in my place/on my network.  Below is a link to the thread by roryjt.
    https://discussions.apple.com/message/16674964#16674964

  • Battery full one minute and empty the next.

    This morning, I woke up and turned on my laptop and had a full battery. I opened my email and Safari, downloaded something from a friend and the battery went down to red and then went into Sleep mode.
    What could have caused this?

    For those running OS 10.4 and higher, you can check your current battery capacity in the Apple System Profiler.
    Go to the Apple Menu in the top left corner, click on "About This Mac" and on the little window that pops up, go to "More Info".
    In the Apple System Profiler, go down to the "Power" section and check your batteries "Full charge capacity". A new battery has a capacity of ~4500mAh. Also check how many charge cycles your battery has, which is in the same window of information. 300 cycles or close to that means your battery got a good, average charge life.
    My 12" PB recalled battery failed insanely quickly, even after being careful to calibrate my battery correctly and following Apple's guidelines: http://www.apple.com/batteries/notebooks.html
    I had 68 charge cycles and my capacity was only ~1300mAh. I had to argue with Apple for them to replace it as batteries are a consumable item (even though mine was only 120 days old at the most).

  • My nano Gen 6 just loses volume for no reason, one minute I hear the music the other it's gone, I have to raise the volume manually. Is it a setting issue or a defect? Thanks

    My nano 6g just loses volume for no reason, one minute I hear the music the other it's gone, I have to raise the volume manually. Is it a setting issue or a defect? Thanks

    If your ipod gets wet, it can cause the buttons to activate all by themselves. This can cause the volume to go up, down.
    If you have a headset with buttons on the wire, check there first. Try a different set of headphones and see what the result is.
    Finally, if the volume is changing a huge amount but only for certain tracks, there is an adjustment you can make on individual tracks in iTunes. Do a get info on one of the tracks doing this, then click the Options tab. Note that there is a volume adjustment slider. Make sure it is set to none.
    i

  • Calc Script runs slow one day and fast the next?

    We are on Essbase 11.1.2.1. When we run calc scripts to load our actuals and run some allocation scripts, the difference in running time for the same exact script is very different day to day. One day three hours the next 45 minutes. Our servers are just for Essbase. We are on Windows 2008 R2. Has anyone else run into this or have any idea how we could figure out the reason for this. Thanks.

    Thanks.  In that case, I would try to grab the cube statistics - especially number of upper-level and input blocks, compression ratio and fragmentation (in EAS you can only see one of the two fragmentation statistics, 'Average Clustering Ratio', not 'Average Fragmentation Quotient') before each run, just to see if they're varying wildly.  Also, if your calc scripts log summary information (is there a SET MSG command in them?  If not you could try SET MSG SUMMARY) then Essbase will write high-level statistics on how much work was done to the application log.
    You can see which cubes are loaded (and consuming memory) in the EAS treeview - if they have a check (tick) mark they are loaded.  But you can also see current activity by right-clicking on the server in the EAS treeview and selecting Edit | Sessions.   That will show whether there are other operations (loads, calcs, reports, restructures etc) occurring at the same time.
    If none of the above give any clues and this is a virtual box (or you have SAN storage) you really will need someone who understands your infrastructure to help.
    I'm assuming these are BSO cubes, by the way!

  • My iPod classic keeps jumping to the next track and switching itself off.

    My iPod classic keeps jumping to the next track and switching itself off?

    It happens randomly. I can be listening to a song, it finishes and then theres no sound. The track doesn't actually start at all. When i say skips i dont mean is in the middle of the song and jumps. I mean the ipod switches to the next track.
    Format - All my songs have been ripped from CD's or downloaded from I-Tunes. I cant find the file type, sorry.
    I had a look on the link but the symptoms dont link to mine. It happens randomly, not when im cycling or moving the divece nescessarily.
    Thanks

  • HT204053 i'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't upadte my free software, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOTOWNED THE MAJOR VERSION OF THIS SOFTWARE" so how I ca

    I'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't update my free software downloaded on both, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOT OWNED THE MAJOR VERSION OF THIS SOFTWARE" so how i can update my softwares on ipad & ipod using the same apple id

    I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
    also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
    I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update.

  • I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them.

    I have 2 ipods,one for music and the other for old time radio shows.Each had their own file.My computer crashed and I had to buy a new one.Now both ipod files are merged into one.How do I seperate them on the computer?

    Hi Craig
    Unfortunately, in your case, there isn't really a way to separate them as far as I can think.
    You could try restoring from a backup, and choosing an older backup perhaps
    Cheers

  • Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

    Adobe InDesign CC 2014 Custom Panel Built With Extension Builder - Problem: Can't tab from one entry field to the next; Hitting tab instead hides all palettes; Is there a fix? This didn't happen in Adobe Indesign CC

    This is planned to be fixed in the next release.

  • HT1212 My daughter's ipod touch is disabled for the next 43 years. Any hints on what she may have done to cuase this and how to fix it?

    My daughter's ipod touch is disabled for the next 43 years. Any hints on how to fix this? I have followed the steps listed on the apple website to p lace it into recovery mode, but the ipod is now "stuck" on the connect to itunes part. Thanks!

    Sounds like a case of entering an incorrect passcode over and over.  Only fix is to follow the instructions in that article you reference, HT1212, and it may take a couple tries to get it to work right.

  • How do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

    how do I get an object to rotate as it moves up and down or left and right from one time key to the next ?

    I'm partial to this series:
    After Effects basics tutorials by Andrew Devis
    The subject matter is very clearly-defined by topic.
    And AE shouldn't up & quit on you... but you haven't breathed a word about your system or your AE version.  Please share.

Maybe you are looking for

  • Reading DBF & XLS files from ODI-AIX

    Hi all I need to read DBF (Foxpro) and XLS files from ODI 10.1.3.5 for AIX 6.x Anyone knows what drivers we need to install or any other kind of method to read them? Thanks in advance Ernest !

  • EPM System Configurator  Error

    Hi, I am trying to open EPM System Configurator but getting error: "The Vital Product Data registry is in use by another installer. Please start this installer after the other installtion is complete." I am not installing the EPM system. It is alread

  • Cant play downloaded music on my mini

    Help !!!! I downloaded 3 songs on my mini, I also loaded some songs from a cd via my computer. When I try to play downloaded songs I select song and hit play. Then my ipod switches to a song from the cd music and plays that instead of requested song.

  • Automatic Printing GR Slip and Label in MIGO

    Currently,if i post Good Receipt using MIGO, GR slip will be automically sent to printer (output type WE01). The is new requirement to print GR slip and label (output type WEE1) automatically when post good receipt using MIGO. Can the configuration c

  • My preferences don't seem to save!  I prefer the light interface, but why does it remain dark?

    I've many years experience using Illustrator, so I know how to trash old preferences to create new ones when re-launched.  I've just upgraded to CS6 from CS5, but have had several attempts to solve this problem to no avail.  Any help would be appreci