Sick of this crap sound card cant get it working in

All it does is pop, fart, squeel, sound is completely knackered.
Sys:
AMD FX 55
2 GB RAM
A8N ALI
7900gtx
crap audigy zs platinum that gives me worse sound quality than software medium.

a friend of mine, with an Audigy card tracked the problem to the Punkbuster; there a forums who discuss this issue
I own an X-FI Fatalty; from the latest di'ver update i've got problems with BF2, none prior to upate
A few days ago I've noticed that the "bug" was gone, maybe the PunkBuster folks tracked and solved the problem

Similar Messages

K9N Neo-F (non-sli) onboard sound card cant install winxp sp2

K9N Neo-F (non-sli) onboard sound card cant install winxp when ı install driver I see this device cant start (code 10)but first install working but now ıcant install sound device pls help me...
K9N Neo-F non sli nforce 550 motherboad
Asus X550HM pci-E vga card
Aopen HB600 400w power
Veritech 512 mb 800 mhz single ram
samsung 160 gb&250gb sata2 hdd

Tried to uninstalled those driver again. ALso what NVidia driver are you using? Tried to used the latest drivers from Nvidia. What are the rails for +12V PSU in the labels? Gd luck.

I have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there

i have an iphone 3G 16GB 4.2.1 - i moved back to canada and got telus mobile service. they cant get phone working because cellular data network tab/button is not on my phone. How do i get it on there

OK. T-Mobile is NOT owned by AT&T... yet... The deal hasn't gone through yet. T-Mobie's US network is not compatible with the iPhone. Lots of things don't work right. There is not, and never has been an unlocked 3G sold in the US. Don't know where the phone originated, but more than likely it was in the US. If that's the case, the phone has been hacked/jailbroken to get it to work.
Have you tried doing a restore or restoring the phone as new? I have to warn you, if you do so and the phone is hacked/jailbroken, it will re-lock to AT&T and will become unusalbe. I think your best bet right now might be to save yourself a lot of grief and just upgrade to new phone from a legitimate source.
I would never even consider buying an iPhone on ebay. 99% or more are hacked, jailbroken and/or stolen.

Dv6265us connexant PCI sound card + windows 7 = Not working

So I'm here becuase I can't find a driver on my own. I've scoured the internet for hours, finding very little to help with my issue. So here goes...
I have an HP Pavilion dv6000 (Dv6265us), and ever since I installed window 7, Windows cannot figure out what drivers to install for the PCI sound card. The best I've found so far says this:
"Windows found driver software for your device but encountered an error while attempting to install it"
"Microsoft UAA Bus Driver for High Definition Audio"
"If you know the manufacturer of your device, you can visit its website and check the support section for driver software."
Now here's the funky part...everywhere I've found information on my laptop, it says I have a Conexant PCI sound card. If I'm wrong I would love for someone to tell me; better yet, a link to a download to actually be able to use the PCI sound card. Right now the card is under other devices and is listed as "PCI Device".
Now the Link I've provided from the conexant site will tell you this under PC Audio Support - Windows® 7,
"Conexant develops audio solutions that are used in a wide range of products including personal computers. We provide customized audio drivers to our customers, which include major computer manufacturers globally. At the request of these manufacturers, Conexant does not provide end-user support or drivers for PC audio products. If you have an issue with the audio configuration in Windows 7, please contact the manufacturer of your computer.
I tried calling HP support, but they wouldn't even answer my yes or no question... "Do you have audio drivers for my laptop that will allow me to hear sound?" Instead of saying yes or no, I was told that I needed to pay fifty to one-hundred dollars;....fifty dollars for a one time fee of telephone service, or one-hundred for the year. I even went as far as asking..."if you can't fix my problem, do I get a refund?" I was told no...so here I am. I've had problems before with hp...but this is rediculous, and whats worse is from the way things look, Connexant was told NOT to support their own product, or provide drivers for windows 7 by their customer(HP). I realize everyone is hurting for money, but **bleep**, this is a new low...

To answer your question, there are no windows 7 drivers for that model notebook. The notebook was designed for Windows 2000, Windows xp and windows vista.
This is one of the issues with upgrading the OS on a computer before checking the specs of the hardware.
I do understand the frustration but it would be more beneficial to revert back to the original OS that the notebook came with. That is what the HP support desk will have you do to prove functionality of the notebook should you have paid for the Diagnostic Support.
Although I am an HP employee, I am speaking for myself and not for HP. Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!

Cant get umtsmon working

Hi,
Im quite new to Arch and so far everything work smoothly. Today I tried to get my Option GE0201 3G card working with umtsmon from aur. But sadly its not working although the card is recognized and I can send sms and see the signal strengh.
First problem: After program start umtsmon complains about some missing binaries (sorry for the german dialog) and clicking the "correct" button doesnt help, just results in a "umtsmon coudn"t find binary *su which is required for full operation" message. What binaries are missing here?
Second problem: Ignoring this complaint and trying to connect pppd gives me the following error
/usr/sbin/pppd: unrecognized option 'replacedefaultroute'
pppd version 2.4.4
Usage: /usr/sbin/pppd [ options ], where options are:
<device> Communicate over the named device
<speed> Set the baud rate to <speed>
<loc>:<rem> Set the local and/or remote interface IP
addresses. Either one may be omitted.
asyncmap <n> Set the desired async map to hex <n>
auth Require authentication from peer
connect <p> Invoke shell command <p> to set up the serial line
crtscts Use hardware RTS/CTS flow control
defaultroute Add default route through interface
file <f> Take options from file <f>
modem Use modem control lines
mru <n> Set MRU value to <n> for negotiation
See pppd(8) for more options.
pppd seems not to provide replacedefaultroute in Arch. Even when I turn of the replacedefaultroute option in the profile setting I still get the same error message. I jused cant get rid of replacedefaultroute...
Does anybody have an idea what going wrong here? With my previous Ubuntu installation and using umtsmin 0.8.9 I never ran across these kind of problems.
Cheers
Felix

The missing su binary is some kind of bug since all arch system has su, and on my systems umtsmon works fine after ignoring this one.
Arch's pppd built wouthout the replacedefaultroute patch, so that one will not work, and you have to enable the default route option.

Sound card installed but not work

I've just reinstalled win xp and installed the creative drivers on the cd, rebooted the computer and was getting sound fine. I went ahead and installed some other drivers and software and now I'm getting no sound. I've go to the add hardware wizard and clicked on Creative SB Audigy (which has a yellow exlamtion point next to it) and clicked next and then I get this message:
Your computer's system firmware does not include enough information to properly configure and use this device. To use this device, contact your computer manufacturer to obtain a firmware or BIOS update. (Code 35)
This worked for me before (using the wizard to get the card working before I reinstalled win xp). I've also gone and updated my BIOS and I'm still having problems.
I've check to see if there were any IRQ conflicts through device manager and there are none but it showes that the Audigy card has the IRQ of 44.
I've also installed and reinstalled and tryied 'repair' of the drivers/software multiple times only to get nowhere and I've tried installing the driver updates off the site only to get messages saying that it can not find any sound cards installed.
I have win xp sp2

After the sound card driver install I installed Norton Internet Security and other small programs (firefox, spampal, ect...)
My computer is custom built:
P4 2.4GHz
Soyo P4X400 Dragon Ultra Platinum
VIA Chipset
BIOS is by Award went from the 2AA6 to 2AA7 revision
GB Ram
Windows XP SP2 installed on a 7GB partition
On board Audio is disable through the BIOS (have never used it since building the computer 2 years ago)
Ati Radeon 9800 pro
Ati HDTV Wonder
Drivers for both ATI cards where installed after the issue with the sound happend. Problem seemed to appear after Norton was installed.Message Edited by oobedoob on 09-2-2005 2:38 AM

Ghost 970 6gb mini display port to Asus pg278Q 144hz cant get to work

I am using a straight mini display port cable to display port no adapter and I can only get 120hz. It seems like it has to do with the fact the monitor is using the intel 4600 gpu instead of the 970m. Is there anyway around this? I changed the setting in nvidia control panel to use it all the time but does not help. Is there any setting I can do?
I cant get 144hz and therefore cannot get g-sync to work. I have searched these forums but cant seem to find a clear answer.

Currently none of MSI laptops support G-Sync, only the dock for GS30 supports (because it's actually a desktop).
I heard MSI they are still working on this but not sure if current models can be patched to support G-Sync or only new models support.

Xonar DG sound card headphone amplifier not working

Hi, I have an Asus Xonar DG sound card. The sound is working fine, however it is very quiet. It seems that the headphone amplifier is not working - or, I cannot find a way to set the impedance.
I have alsa running and tried messing with alsamixer settings. Also, I have PulseAudio installed, but pavucontrol offers limited options.
How can I change the impedance level? Or how do I get the headphone amplifier to work? It seems to be supported as of kernel 3.14 - http://sourceforge.net/p/alsa/mailman/message/32973122/
Thank you!

Remove the old drivers (carefully) in Safe Mode and install the new drivers in Normal Mode.

Cant get cluster working on different machines

Hi,I am using weblogic 5.1 with Service pack 9. I had the cluster up and running on one NT machine. Then I decided to expand it on another maching in the LAN. I created the same directory structure i.e mycluster and mycluster/server(ip address) in the 2nd machine. Cluster name and the multicast address also remaining the same. But on getting my server instances up on both the machines, I cant get it on one clusterNilesh


Are the two machines on the samesubnet, i don't know about WLS6.0 but in
          WLS5.1, it is required that both these machines must be in the same subnet.
          Hope this helps.
          Ramesh
          "Nilesh Shah" <[email protected]> wrote in message
          news:3b3a50b4$[email protected]..
          > Hi,I am using weblogic 5.1 with Service pack 9. I had the cluster up and
          running on one NT machine. Then I decided to expand it on another maching in
          the LAN. I created the same directory structure i.e mycluster and
          mycluster/server(ip address) in the 2nd machine. Cluster name and the
          multicast address also remaining the same. But on getting my server
          instances up on both the machines, I cant get it on one clusterNilesh

I cannot update iTunes. In instructions for updating it says to go to help and then click check for updates. Guess what! No help options within iTunes. I need to be able to syn my iPod touch 5 but I cant without the newest iTunes. I am sick of this crap.

I am EXTREMELY tired of having to deal with this. iTunes has been an issue since I got it and unfortunately whenever I want to update my computer's iTunes account it demands I download a new format (which has continually gotten worse and WORSE over time). I wish things would not be updated so frequently. As soon as I have the new format working decently (ONLY decently, I have never had an apple product that has worked as it is stated it should) another update comes along. And THIS time, I cannot download it. First problem: I open iTunes. It says I need to update for my ipod to work. I think "great. I click ok and it will do it automatically!" Oh boy was I wrong. I don't do anything. I search up how to update things. It says ON THIS SITE: Go to help in the itunes store. THERE. IS. NO. CLEARLY. VISIBLE. HELP. SECTION. I have looked for FAR to long for this to be worth my time.

Okay - let's cut to the chase...
If the Menu Bar (File, Edit... Help) shown in my screenshot below is not visible, use CTRL+B to display it. Then click on Help/Check for Updates. If one is available, you will be able to select it at this time.
Note the item at the bottom of the list; About iTunes. Selecting that will show you which version of iTunes you are using.
An alternative method to display the Menu Bar is click on the box in the top left of your iTunes window...

After updating the iphone to iosv5.1 the sim card cant get recognised saying contact ur carrier

dear moderator
need to ask about this issue new ?
after downloading and instaling itunes v10.6 and installing ios v5.1 the iphone cant see the sim card saying contact ur carrier , i removed the sim card and put it in another phone it worked
need to ask what are these nos
imei 01 202500 394397 7
iccid 8920 0180 0 111 9466 000
i chcked the itunes on the lap top for updated a message reply came - uptodate this means that the soft ware is right
so why the iphone cant see the sim card and cant recognise the place for apple to recognise the phone
please reply asap
eng jack
[email protected]

This is a user to user technical support forums.
The moderators will not respond.
I would strongly suggest that you edit the post to remove your personal information.
Was the device purchased as unlocked or locked to a specific carrier? If locked, is the SIM card from that carrier?

OSX *****. I'm sick of this crap.

I don't know what happened, must have been from one of those OSX software updates. But now OSX thinks it's ok to hide all my windows if they aren't part of the active application. So much for being able to watch a video, while working in another application. Too much for OSX to handle. Can't even display another application window while working in another. It's not like anyone would ever want to view anything from two applications at the same time, right? I'm on 10.6.7. This isn't even exclusive to 3rd party apps, Apple's own apps do this now too, like preview. So say you want to reference a PDF open in preview, while working on another application. Not possible. You are only allowed to view one application at once now, apparently.

What you describe is not the default behavior. Fred probably has you covered, but if not, you should consider re-posting with a different title and a bit less attitude. This one is guaranteed to turn off most of the folks here. A lot of them won't even consider looking at it, since the subject makes you sound like a troll.

[SOLVED]XBMC Alsa Nvidia HDMI cant get dmix working with plughw:1,

With 2.6.34 i'm able to get audio through my Asus (Nvidia chipset) GF210.
The issue is that in order to get audio in XBMC, i have to specify a custom audio device as plughw:1,7 and that seems to disable dmix -- ergo, no more two sounds at once (so no crossfade during music playback).
this is the only card description that works; it basically tells XBMC to output to the raw hardware directly on card 1 device 7 skipping all layers of abstraction (including dmix).
this method is only recommended for applications that will do all their own mixing (think jackd). so the behavior is to be expected.
some online docs say dmix will only work with the "default" device, others say it might work if i don't use the hw descriptor, but omitting the "hw" --> no sound at all.
the only other way i can get sound at all is to redefine pcm.!default as the plughw:1,7 device in /etc/asound.conf and then specify "default" in XBMC (this makes sense) but this still seems to mean no dmix.
obviously, resetting everything and using the normal VGA + Headphone-out mixes and crossfades just fine.
So, does anyone know:
* a way to get dmix going with a custom plughw card/device
* a way to tell XBMC to do the mixing on its own before sending the sound to plughw -- is this possible?
any help appreciated, it's more of a want than a need right now.
up to date 64bit, stock 2.6.34.1-1 kernel, and xbmc 9.11-17 if that matters.
Last edited by brisbin33 (2010-07-10 01:16:54)

Getting dmix to run through a custom device is easy:
pcm.dmixer {
type dmix
ipc_key 2048
slave {
pcm "hw:1,7" # Always use pure hw. dmix will reformat/resample audio.
period_size 512 # If you get stuttering/or non-working audio, fiddle around with these
buffer_size 4096
rate 48000 # HDMI, I'll assume 48kHz
format S16_LE # Should be default for pretty much any soundcard.
bindings {
0 0
1 1
pcm.!default {
type plug
slave.pcm dmixer
Using this approach, everything will pass through dmix, which passes to hw:1,7.
Last edited by Themaister (2010-07-09 21:58:01)

Cant get videos working on my other itunes

hi there hope someone can help,
I have 2 macs, a mini plugged into my TV and my G4 tower for everyday use, but as this has a larger hardrive i store all my tunes and videos on this and has my ipod syncd. I have recently installed tubesock to download utube vids and some i have bought off itunes but they are on my mac mini, when i copy them over to my other mac and try to put them on my ipod it says i cant.
can anyone help ??

Your videos that you've downloaded or you made have another Format than iPod:-iPod,MPEG
-other,mp3(for example)
So you need to download on google an MPEG converter programm(easy to find).you convert your videos into MPEG and iTunes will accept the videos with the sound.lol

Came home yesterday to find my time capsule has an orange light blinking and my wifi network is no longer working. Not sure how/why this happened and can't get it working. Do i just reset it and will this lose my backups? Or can I create a new wifi n/w?

Its an 802.11n (4th Gen) model
I looked at the diagnostics screen (next to the blinking orange icon on the Airport Utility and it says there are four issues:
the software (currently V 7.6.1) has an update available. If I click update I get the error message "There was an error connecting to the update server. Check your network settings and try again". However, nothing's been changed settings-wise
The other 3 status issues are:
Internet Connection - but the router is working fine and I can connect to the router via wifi on my MacBook Pro
No DNS Servers - I have no idea what this means
Ethernet Unplugged - it's not and I also replaced the ethernet cable which has no effect
Do I just cut my losses and hit the reset button - if so will I need to back everything up again (i.e. I will no longer be able to access my backups) or do I just set up a new wifi network - again, will this impact on my backups?
Any help/advice would be appreciated - thanks

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Sick of this crap sound card cant get it working in

Similar Messages

Maybe you are looking for