SID - details

Dear all,
In Bi we come across a term called SID - what is the use of this and how this functions.Further there are tables called "F" and "E" what are they and how these functions.
Your answers will be of much help
Regards,
M.M

Hi Magesh,
The below link will help you in case of SID and its use and also it explains about E and F tables.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84
Regards,
Raghavendra Rao.Kolli

Similar Messages

Error when assigning SID (details in long text) RS

Dear Friends,
while loading GL data to ODS In the last stage of load i am getting this error.cannot able to load. need urgent help i will assign points.
Sampath

Hi,
Find out the Record and package number by looking into PSA table with selection on the request number and infoobject for which you are getting the mentioned error.
To know the PSA table name , switch on technical name after you select Show Data flow option from the context menu of ODS.
Once you know the record number , you have to modify it in PSA and you need to reupload from PSA and reactivate the request.
With rgds,
Anil Kumar Sharma .P

Error getting SID

Hi,
I am getting the following errors in the activation of ODS.
1) Error getting SID for ODS object ZMMIVO01
2) Value 'PPM@HIGHWA' (hex. '50504D40484947485741') of characteristic ZCUSTREF contains invalid characters
3) Error when assigning SID (details in long text)
Please help me in resolving this and I can assure full points for very helpful answers
Thanks,
RV

Hi,
1) SID errors
SID errors occurs generaly when master is not loaded and activation takes place.
If master data is loaded perform attribute change run and try again.
Also try repairing master data object in RSRV.
2) Invalid char
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
Steps
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular achr to permitted character list in BW (Run TCODE RSKC
Input the <character> and execute the program) This will add <character> to the allowed characters list.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Thanks,
JituK

Error while activating ODS Object

Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in PSA. How should i get rid of this error. Any idea would be appreciated.
Regards,
Raj

Raj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti.

Multiple "catagories" in ical server

Hi - What would be the best way to implement "categories" with ical server. Since switching to ical we have used separate calendars to implement categories (unlike other calendars that let you assign a category to events in a single calendar) Now that we have ical server, I would like a group to be able to access and edit these multiple calendars.
These calendars do not use user names but things like:"appointment", "office", etc...
How would this be setup most efficiently with ical server?
Thanks

Dear Experts,
please tell me is it ok or i need to change something else?
this example is for only one listener, and i put both SID details in same LISTENER, or i need to change the listener name for another server. it is very confusing...
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY = PM1.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
          (KEY = PM1)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = 10.11.230.12)
          (PORT = 1527))
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY =PE2.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
          (KEY = PE2)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = 10.11.230.12)
          (PORT = 1528))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PM1)
      (ORACLE_HOME = /oracle/PM1/102_64)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = ON
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PE2)
      (ORACLE_HOME = /oracle/PE2/102_64)
Rishi

Error while activation of ODS Object.

Hi,
I have loaded the data from R/3 to a ODS Object and the activation of ODS failed due to the following errors as shown below..
-Value '20060 ' of characteristic 0CALQUARTER is not plausible
-Error when assigning SID (details in long text)
-Activation of data records from ODS object ZODS_02 terminated
-Error getting SID for ODS object ZODS_02
I could see that Calendar Quarter as 20060 in table /BIC/AZINV_O0240. There is a calendarday mapped to quarter and year in update rules of ODS object. How the calendar quarter is populated in update table in BW. How should i get rid of this error. Any idea would be appreciated.
Regards,
Raj

don't post same issue twice. Bhanu working on your thread.
check this ...
Raj,
you are getting this calender qurter from SAP right... check in RSA3 fro the your Datasource. if you are getting same value like '20060'. you can do one thing... you can set 'No Update' in Transfer Rules. you can write a routine in Update Rules for populating the data for calender Week.
you can call some standard function modules or you can write a small routine. If you want to write a routine check this thread...Re: Date to Quarter
Possibilites:
1. updtae rules
2. if RSA3(PSA) shows the value of the Quarter as '20050', if it is custom extractor(Generic using FM) you can change this.
3. If it is Standard Extractor or Generic Extractor (using either view/table or Infoset) you can enhance this. you can do the same thing in SAP Side.
All the best.
Regards,
Nagesh Ganisetti.

ODS data activation problem

Hi,
I have to load description from the flat file into the ODS since the ODS data needs to be a replica of the flat file.
As the description is greater than 60 CHAR, I have split the description into 3 infoobjects in the transfer rule, using the individual line routine.
After data is loaded into the ODS, the technical status as well as the total status is green, but when I activate the request for that corresponding load, the activation fails i.e. the data is present in the 'New Data' table, but it is not moving into the 'Active Data' table.
Then, I tried a different method.
I activated the setting in the ODS; 'Activate ODS object data automatically' and tried to load the same data with the same conditions to the ODS.
This time the loading failed, giving multiple errors like;
1) Value 'Absence Transactrion Dataload Failure ' (hex. '416273656E6365205472616E7361637472696F6E204461.
2) Value 'ifying days ' (hex. '696679696E672064617973 ') of characteristic Z_LDES2 contains invalid cha.
3) Activation of data records from ODS object DES3_ODS terminated.
4) System error: RSDU_ANALYZE_TABLE_ORA/ ORACLE.
5) Error getting SID for ODS object DES3_ODS.
6) Error when assigning SID (details in long text).
7) Error when assigning SID (details in long text).
Please provide a solution for this.
<b>*********Points will be rewarded*********</b>

Hi Praveen,
Thanks for the soltion.
I checked in RSRV. There were no errors.
So, I tried loading the data again. This time, I got the same error.
But when I checked the contents of the Active table of ODS, the data was loaded, although in RSMO the status was RED.
The laoding was successfull as of now, but lets hope this problem doesnt occur again.
Please help, if you have any idea regarding this problem.

How do I test Sender SOAP scenario?

Hi
Soap - IDOC.
The authorizations on the WS to send data is not yet provided to me.
thus, I m trying to send a sample data from Altova XML spy.
For this purpose I have created a WSDL from ID (Tools -> create WS)
in Receiver NS, receiver MI, I have given receiver side details only
but in sender side NS and MI and Sender service, I have given the Sender service that I have created in ID and the XI's local NS and receiver MI
For URL, I have selected on "Propose URL". Now will I be able to send data to the R3 server with this link?
(R3 is production server in my network)
now with that WSDL, I coudlnt validate in XML SPY.
have I provided the correct details?
Please suggest me is there any other way of testing Sender WS to IDOC?
Thanks and Regards,
Venkat.

oops I guess I have confused u
let me detail it again
Scenario : SOAP - XI - IDOC
The scenario is finished.
I dont have authorizations on WS to logon n send the data
Thus, I have created WSDL from ID (in XI)
now I want to send data to XI which inturn will post the data to R3 and create a IDOC
when I try to validate the WSDL created through XI using SPY, it couldnt validate and I couldnt send the request
I want to send the data from outside XI and I want to generate a IDOC with the test data I have specified.
how do I do it?
Hope I made it clear this time
Thanks,
Nikhil.

Want to make an iview invisible on click of a button!!!

Hi Experts,
We've a requirement wherein we want an iview to be called but it should not be visible on the left hand side navigation pane.
Actually, the iview has been assigned to a workset and is called as soon as the user clicks on the workset. Now after the ivew is called it appears on the left hand side navigation panel as well as since we are using a workset map iview within the workset the iview is visible in the content area as well.
I want that after the iview is called and the content is displayed. On click of a button, I want that iview to become invisible and the control should go to the next iview.
I know how to navigate from an iview to another iview but I don't know how to make the first iview invisible on click of a button.
Kindly suggest how can I acheive this functionality?
Regards,
Anurag

Hi Vinod,
Thanks for the prompt reply.
Yes., the new iview would be visible in the same window and the previous iview should not be present on the left hand side navigation panel.
Currently, since the iview is a part of a workset, on click of a button the user is navigated to the new iview but the previous iview is present on the navigation panel. Is there any way possible so that we can remove the previous iview from the left hand side detailed navigation panel when the user navigates to the new iview
Actually, we have a workset map iview and so all the iviews assigned to the worksets are available as links on the screen. After the user navigates to the new iview the previous iview's link should become invisible from the content area.
Is this possible to remove the previous iview's link from the content area and the navigation panel on the left hand side?
Thanks in advance for your reply!!!
Regards,
Anurag

Searching for a good file manager

I'm searching for a good file manager. Konqueror 3.5 is quite good, dolphin 4.1 and konqueror 4.1 are not. Since konqueror 3.5 is going to die due to lack of support in the future, I kind of need to find a new good file manager...
Do there exist file managers with the following features?
Many of these features are things I thought were quite logical to be in a file manager, but seem to be missing in most "modern" ones...
-independent of any desktop (gnome or KDE), just a standalone program
-preferably not being both a web browser and file manager in once, at least not in an annoying way. Konqueror 3.5 shows that being that combination is possible without being annoying.
-ability to have a tree view of the folders on one side and list view showing the files and subfolders of the folder currently selected in the tree on the other side
-detailed list view showing at least filename, type, date and size, and the ability to sort according to any of these properties
-a non-detailed view showing image contents would also be nice, to browse folders of photos or other images
-ability to open files in certain programs if you doubleclick the file, NOT open it by singleclicking, singleclicking may only select it
-ability to select multiple files by dragging box around files or using keys like "ctrl" and "shift"
-ability to do "open terminal here" or type terminal commands in the current open directory
-must have ability to drag files from one folder to another, from list view to tree view and vica versa, to move or copy them
-and must have ability to use "ctrl+c" and "ctrl+v" to copy files and foldes from here to there
-multiple tabs is a huge plus
-favorites (to local folder paths) is also a huge plus
-preview of files when hovering the mouse over them is nice
-must have ability to zip and unzip (or other compression formats) folders by just right clicking them and choosing a zip/unzip command there
-in addition to that, must also have ability to browse through a zip file as you would through a normal directory, and drag files from the insides of the zip file to the tree view to automatically unzip those files there, and of course "ctrl+c"/"ctrl+v" should also work to copy a file from the inside of the zip file, to some other folder on your disk
-no horizontal autoscrolling in the tree view, that is an invention straight from the abyss...

I know exactly how you feel about KDE 4 vs. 3 -- Konqueror was the best part of KDE for me (pretty much the only part I ever used, actually; my window manager is a slightly modified version of WMII and I generally loathe "desktop environments"). KDE 4 ruined it, completely and utterly.
I submitted about 20 different bug reports about Konqeuror 4, mostly features that they'd deleted or mangled; some of them are starting to be addressed now. I don't think they'll ever fix the speed issues though, because those are dependent on the underlying KDE 4 libraries as far as I can tell -- it's as if KDE 4 were purposely and deliberately designed to be slower than KDE 3. Even if they fix all of its deficiencies, that'll probably keep me from using it...
Right now there's KDEmod, which will hopefully maintain its KDE 3 branch for a while longer. It's starting to show some problems, though; I haven't been able to get kdemod konqueror 3 to work fully out of the box (the settings pages are all blank). On my main machine, I somehow managed to hack together some of the KDEmod3 packages so that I have a functional konqueror 3 running alongside the Arch repository's version of KDE4. I'm afraid to pacman -Syu now, though, because it will probably break horribly :P
I don't remember exactly how I got konqueror 3 going like that, as I did it in my initial fit of rage after I did the pacman -Syu that got me KDE4 (a decision I have regretted ever since), but it was something like this:
1. move /opt to /opt.kde4
2. make a new /opt
3. download several KDE 3 packages from the KDEmod3 repositories manually
4. extract those packages into the new /opt with tar -xzf (NOT pacman!)
5. try /opt/kde/bin/konqueror
6. read reams of error messages about missing libraries, segfaults, etc.
7. try to supply the missing libraries by downloading other kdemod3 packages and manually extracting them
8. goto 5
Then, when everything worked (sort of), I renamed some stuff so that 'konqueror' is konqueror 4 (I think having it konqueror 3 broke something else, but I don't remember what), and konqueror 3 is called 'k3nqueror'.
If KDEmod3 ever goes away and there's no other good replacement file manager by then, I'll probably take the source code of KDE3 and try to make a standalone version of konqueror out of it. (Which will probably be quite a project because of how interdependent all the KDE components are.)
Some features I "need" in a file manager, besides the ones you mentioned:
- Konqueror's tree view (where you can expand folder branches in the file list)
- Infinite view splitting -- I frequently have my konqueror windows split into 4, sometimes as many as 6 or 7 view panes. Very useful for sorting out files.
- Selection rectangles are sensitive only over files -- I find full-row-select really annoying, because there are no guaranteed "blank" areas that you can click on to clear a selection. I also use this behaviour to grab long-named files that are interspersed with short ones, because they hilight first when the rectangle touches them (you wouldn't think this very useful, but surprisingly often you do want to do something to all the long-named files...)
- Right-clicking on a folder and clicking "Paste" pastes into that folder, not the current one -- you'd be amazed at how many file managers get this wrong. I shouldn't have to cd into a folder just to paste some files there.

In ODI_DEMO model, couldn't find trg_customer table and the parameters_FILES datastore

I'm following the odi-12c-getting-started-guide-2032250. But after I imported the demo environment, I couldn't find the parameters_FILES datastore. and under the Sales Administrator datastore, I couldn't find the trg_Customer table that I already created. Can anybody tell me why? thanks in advance.

Hi
First of all, drag and drop odisqlunload tool in package
1) select odisqlunload > in property window enter below details
Target File: provide any .txt or .xls file with location (in my case I given .xls file which i created already in d:\Error_records location)
JDBC Driver: oracle.jdbc.driver.OracleDriver
JDBC URL: jdbc:oracle:thin:@hoostname:port:sid (provide you DB hostname / port and SID details)
User: provide target DB username
Password: enter terget Db password
File Format: Delimited (as per requirement choose the format, I choosen as Delimited type)
SQL Query: select * from E$_TRG_CUSTOMER (Don't give double quotes for E$ table)
and keep rest of the parameter as it is.
For more info..
http://gerardnico.com/doc/odi/webhelp/en/ref_tools/snpssqlunload.html
Hope this may helps you
Regards,
Phanikanth

How to get murrine dust theme to work? (new concept theme for ubuntu)

hello!
i just want to try and install the new concept theme for ubuntu - DustTheme!
but i don't get it to work. it uses the murrine-engine - but when i want to select it via gtk-chtheme or gtk2_prefs it does not sets the colors or anything else. when i hit apply, the standard ugly gtk-theme will be selected.
anyone here who actually uses the theme?
more information:
DustTheme Ubuntu Wiki
installed packages:
gtk-engine-murrine 0.53.1
also tried: gtk-engine-murrine-svn rev 94
please help, thanks...
bye iggy
Last edited by iggy (2008-10-22 10:04:48)

andrek wrote:There's a difference between the new SVN version of the Murrine engine and the Dust theme - you've got to change "profile" into "style" in theme's gtkrc file.
Hrm, I'm not quite sure what you mean. I don't see "profile" anywhere in the gtkrc - everything seems to be labeled as "style" already.
# Dust theme
# by Rico Sta. Cruz and Ricardo (Kido) Mariano III
# Last rev: Oct 4
# Set GtkSettings color scheme property.
# This can be overriden (via an xsetting) with eg. the gnome-appearance-properties.
#gtk_color_scheme = "fg_color:#323232\nbg_color:#e4e0d8\nbase_color:#fff\ntext_color:#323232\nselected_bg_color:#996B5C\nselected_fg_color:#fff\ntooltip_bg_color:#ebeab8\ntooltip_fg_color:#323232"
gtk_color_scheme = "fg_color:#323232\nbg_color:#D9D4CC\nbase_color:#fff\ntext_color:#323232\nselected_bg_color:#996B5C\nselected_fg_color:#fff\ntooltip_bg_color:#ebeab8\ntooltip_fg_color:#323232"
include "scrollbars/scrollbar.rc"
style "murrine-default"
# Style Properties
GtkScrolledWindow ::scrollbar-spacing = 3
GtkScrolledWindow ::scrollbar-within-bevel = 1
GtkButton ::child-displacement-x = 1
GtkButton ::child-displacement-y = 1
GtkButton ::default-border = { 0, 0, 0, 0 }
GtkButton ::focus-padding = 0
GtkCheckButton ::indicator-size = 14
GtkPaned ::handle-size = 6
GtkRange ::trough-border = 0
GtkRange ::slider-width = 15
GtkRange ::stepper-size = 15
GtkScale ::slider-length = 20
GtkScale ::trough-side-details = 0 # 0 = thin slider, >0 = thick slider
GtkScrollbar ::min-slider-length = 30
GtkMenuBar ::internal-padding = 0
GtkExpander ::expander-size = 16
GtkToolbar ::internal-padding = 1
GtkTreeView ::expander-size = 14
GtkTreeView ::vertical-separator = 0
GtkMenu ::horizontal-padding = 0
GtkMenu ::vertical-padding = 0
WnckTasklist ::fade-overlay-rect = 0
xthickness = 1
ythickness = 1
fg[NORMAL] = @fg_color
fg[PRELIGHT] = @fg_color
fg[SELECTED] = @selected_fg_color
fg[ACTIVE] = @fg_color
fg[INSENSITIVE] = darker (@bg_color)
bg[NORMAL] = @bg_color
bg[PRELIGHT] = shade (1.02, @bg_color)
bg[SELECTED] = @selected_bg_color
bg[INSENSITIVE] = @bg_color
bg[ACTIVE] = shade (0.9, @bg_color)
base[NORMAL] = @base_color
base[PRELIGHT] = shade (0.95, @bg_color)
base[ACTIVE] = shade (0.9, @selected_bg_color)
base[SELECTED] = @selected_bg_color
base[INSENSITIVE] = @bg_color
text[NORMAL] = @text_color
text[PRELIGHT] = @text_color
text[ACTIVE] = @selected_fg_color
text[SELECTED] = @selected_fg_color
text[INSENSITIVE] = darker (@bg_color)
engine "murrine"
animation = TRUE # FALSE = disabled, TRUE = enabled
colorize_scrollbar = TRUE # FALSE = disabled, TRUE = enabled
contrast = 1.0 # 0.8 for less contrast, more than 1.0 for more contrast on borders
glazestyle = 0 # 0 = flat highlight, 1 = curved highlight, 2 = concave style, 3 = top curved highlight, 4 = beryl highlight
gradient_shades = {1.1,1.0,1.0,0.87} # default: {1.1,1.0,1.0,1.1}
gradients = TRUE # FALSE = disabled, TRUE = enabled
highlight_ratio = 1.0 # set highlight amount for buttons or widgets
lightborder_ratio = 1.0 # sets lightborder amount for buttons or widgets
lightborderstyle = 0 # 0 = lightborder on top side, 1 = lightborder on all sides
listviewheaderstyle = 1 # 0 = flat, 1 = glassy, 2 = raised
listviewstyle = 0 # 0 = nothing, 1 = dotted
menubaritemstyle = 0 # 0 = menuitem look, 1 = button look
menubarstyle = 1 # 0 = flat, 1 = glassy, 2 = gradient, 3 = striped
menuitemstyle = 1 # 0 = flat, 1 = glassy, 2 = striped
menustyle = 0 # 0 = no vertical menu stripe, 1 = display vertical menu stripe
reliefstyle = 2 # 0 = flat, 1 = inset, 2 = shadow
rgba = FALSE # FALSE = disabled, TRUE = enabled
roundness = 2 # 0 = squared, 1 = old default, more will increase roundness
scrollbarstyle = 2 # 0 = nothing, 1 = circles, 2 = handles, 3 = diagonal stripes, 4 = diagonal stripes and handles, 5 = horizontal stripes, 6 = horizontal stripes and handles
sliderstyle = 0 # 0 = nothing added, 1 = handles
stepperstyle = 1 # 0 = standard, 1 = integrated stepper handles, 2 = unknown
style = MURRINE # engine style options: CANDIDO, CLEARLOOKS, MIST, MURRINE, NODOKA
toolbarstyle = 0 # 0 = flat, 1 = glassy, 2 = gradient
style "murrine-wide"
xthickness = 2
ythickness = 2
style "murrine-wider"
xthickness = 3
ythickness = 3
style "murrine-dark"
bg[NORMAL] = shade(0.24,@bg_color)
bg[SELECTED] = shade(0.9,@selected_bg_color)
bg[PRELIGHT] = shade (0.5, @selected_bg_color)
bg[ACTIVE] = mix (0.5, @selected_bg_color, shade(0.2,@bg_color))
bg[INSENSITIVE] = shade(0.2,@bg_color)
fg[NORMAL] = mix (0.7, '#ffffef', @fg_color)
fg[PRELIGHT] = mix (0.8, '#ffffef', @fg_color)
fg[SELECTED] = mix (0.8, '#ffffef', @fg_color)
fg[ACTIVE] = mix (0.8, '#ffffef', @fg_color)
fg[INSENSITIVE] = mix (0.4, '#ffffef', @fg_color)
style "murrine-button"
xthickness = 3
ythickness = 3
bg[NORMAL] = shade (1.2, @bg_color)
bg[PRELIGHT] = shade (0.9, @bg_color) #mix(0.82,shade (1.3, @bg_color),@selected_bg_color)
bg[ACTIVE] = shade (0.85, @bg_color)
# SZ07: button engine changed to clearlooks.
# Change back to murrine to get the old dotted focus ring.
engine "clearlooks" {
contrast = 1.0
radius = 2.0
style = GUMMY
reliefstyle = 1
style "murrine-toolbar" = "murrine-default"
xthickness = 4
ythickness = 3
bg[NORMAL] = shade(0.88,@bg_color)
bg[PRELIGHT] = shade(0.88,@bg_color)
bg[ACTIVE] = shade(0.88,@bg_color)
bg[SELECTED] = shade(0.88,@bg_color)
bg[INSENSITIVE] = shade(0.88,@bg_color)
fg[NORMAL] = @text_color
fg[PRELIGHT] = @text_color
fg[SELECTED] = @text_color
fg[ACTIVE] = @text_color
fg[INSENSITIVE] = @text_color
fg[NORMAL] = @text_color
text[NORMAL] = @text_color
#engine "murrine" {
# gradient_shades = {1.1,1.0,1.0,0.85}
engine "pixmap"
image {
function = BOX
file = "toolbar_light.png"
border = {1,1,1,1}
image {
function = HANDLE
overlay_file = "handlebox.png"
overlay_stretch = FALSE
orientation = HORIZONTAL
image {
function = HANDLE
overlay_file = "handlebox.png"
overlay_stretch = FALSE
orientation = VERTICAL
style "murrine-toolbar-item" = "murrine-toolbar"
bg[NORMAL] = shade(0.88,@bg_color)
bg[PRELIGHT] = shade(1.1,@bg_color)
bg[ACTIVE] = shade(0.6,@bg_color)
fg[INSENSITIVE] = shade(0.6,@bg_color)
fg[ACTIVE] = @selected_fg_color
text[ACTIVE] = @selected_fg_color
engine "clearlooks" {
contrast = 1.0
radius = 2.0
style = GUMMY
reliefstyle = 1
style "murrine-toolbar-sep" = "murrine-toolbar-item"
bg[NORMAL] = shade(0.5, @bg_color)
style "murrine-dark-toolbar" = "murrine-dark"
xthickness = 6
bg[PRELIGHT] = mix (0.3, @selected_bg_color, shade(0.2,@bg_color))
bg[SELECTED] = mix (0.3, @selected_bg_color, shade(0.2,@bg_color))
bg[ACTIVE] = mix (0.5, @selected_bg_color, shade(0.2,@bg_color))
engine "murrine"{
gradient_shades = {1.3,1.1,1.1,0.9}
style = MURRINE
style "murrine-dark-toolbar-sep" = "murrine-dark-toolbar"
{ xthickness = 2 }
style "pixmap-dark-toolbar" = "murrine-dark-toolbar"
# To-do: make the toolbar recolorable, possibly without using pixmaps
# We only like this because of the top line, anyway.
engine "pixmap"{
image {
function = BOX
file = "toolbar_o.png"
border = {1,1,1,1}
image
function = HANDLE
overlay_file = "handlebox.png"
overlay_stretch = FALSE
orientation = HORIZONTAL
image
function = HANDLE
overlay_file = "handlebox.png"
overlay_stretch = FALSE
orientation = VERTICAL
style "murrine-notebook-bg" = "murrine-default"
bg[NORMAL] = shade (1.05, @bg_color)
bg[SELECTED] = shade (1.05, @bg_color)
xthickness = 2
style "murrine-notebook" = "murrine-notebook-bg"
xthickness = 2
style "murrine-tasklist"
xthickness = 3
ythickness = 3
style "murrine-panel" = "murrine-dark" {
bg[NORMAL] = shade (0.15, @bg_color)
engine "murrine" {
style "murrine-menu" = "murrine-dark"
xthickness = 0
ythickness = 2
bg[NORMAL] = shade (0.15, @bg_color)
text[NORMAL] = @bg_color
text[PRELIGHT] = @selected_fg_color
style "murrine-menu-item" = "murrine-dark"
xthickness = 0
ythickness = 3
engine "murrine" {
roundness = 0
contrast = 0.2
gradient_shades = {1.0,0.9,0.9,0.7}
style "murrine-separator-menu-item"
GtkSeparatorMenuItem::horizontal-padding = 0
GtkWidget::wide-separators = 1
GtkWidget::separator-width = 1
GtkWidget::separator-height = 1
xthickness = 1
ythickness = 0
style "murrine-treeview"
# Based on the default style so that the colors from the button
# style are overriden again.
style "murrine-treeview-header" = "murrine-default"
xthickness = 2
ythickness = 1
bg[NORMAL] = shade(0.9, @bg_color)
bg[PRELIGHT] = shade(1.0, @bg_color)
bg[ACTIVE] = shade(0.8, @bg_color)
GtkWidget::focus-line-width = 0
engine "murrine" {
gradient_shades = {1.3,1.0,1.0,1.1}
style = MURRINE
contrast = 0.5
glazestyle = 1
listviewheaderstyle = 1
# SZ07: This is added to tell the theme how to color checkmarks and radio items that are not in menus.
style "murrine-radiocheck" = "murrine-default"
text[NORMAL] = shade (1.15, @bg_color) # Color for checks/radio items.
text[PRELIGHT] = @selected_fg_color # Color for selected checks/radio items.
engine "murrine"{
style "murrine-tooltips"
xthickness = 4
ythickness = 4
bg[NORMAL] = @tooltip_bg_color
fg[NORMAL] = @tooltip_fg_color
style "murrine-progressbar"
xthickness = 1
ythickness = 1
fg[PRELIGHT] = @selected_fg_color
engine "murrine"
style = NODOKA
#I want my shiny progressbar!
#gradient_shades = {1.3,1.1,0.9,1.0}
style "pixmap-statusbar" = "murrine-default"
ythickness = 3
xthickness = 3
engine "pixmap"
image
function = RESIZE_GRIP
recolorable = TRUE
detail = "statusbar"
overlay_file = "statusgrip.png"
overlay_border = {0,0,0,0}
overlay_stretch = TRUE
image
function = SHADOW
shadow = IN
file = "blank.png"
image
function = SHADOW
shadow = OUT
file = "blank.png"
image
function = SHADOW
shadow = ETCHED_IN
file = "blank.png"
image
function = SHADOW
shadow = ETCHED_OUT
file = "blank.png"
style "murrine-comboboxentry"
style "murrine-spinbutton"
style "murrine-scale"
bg[PRELIGHT] = shade(0.9,@bg_color)
engine "murrine"{
gradient_shades = {1.3,1.1,0.9,1.0}
style "murrine-hscale" = "murrine-scale"
style "murrine-vscale" = "murrine-scale"
style "murrine-scrollbar"
bg[ACTIVE] = "#fff"
bg[NORMAL] = @bg_color
bg[PRELIGHT] = shade(0.9,@bg_color)
engine "murrine"{
gradient_shades = {1.1,1.0,1.0,0.9}
contrast = 1.4
style "murrine-hscrollbar" = "murrine-scrollbar"
style "murrine-vscrollbar" = "murrine-scrollbar"
style "murrine-menubar" = "murrine-dark"
engine "murrine"{
gradient_shades = {1.0,0.9,0.9,0.75}
style "murrine-frame"
#Uncomment for dark statusbars. Breaks some apps.
#bg[ACTIVE] = shade(0.2,@bg_color)
#fg[NORMAL] = mix (1.5, @fg_color, '#ffffff')
#fg[PRELIGHT] = mix (1.4, @fg_color, '#ffffff')
style "murrine-frame-title" = "murrine-frame"
fg[NORMAL] = lighter (@fg_color)
style "murrine-nautilus-location"
bg[NORMAL] = mix(0.60, shade (1.05,@bg_color), @selected_bg_color)
# Matches
# murrine default style is applied to every widget
class "GtkWidget" style "murrine-default"
# Increase the x/ythickness in some widgets
class "GtkRange" style "murrine-default"
class "GtkFrame" style "murrine-frame"
class "GtkSeparator" style "murrine-wide"
class "GtkEntry" style "murrine-wider"
class "GtkStatusbar" style "pixmap-statusbar"
class "GtkMenuBar" style:highest "murrine-menubar"
# Toolbar default: dark
#class "*HandleBox" style "pixmap-dark-toolbar"
#class "GtkToolbar" style "pixmap-dark-toolbar"
#widget_class "*HandleBox" style "pixmap-dark-toolbar"
#widget_class "*<GtkToolbar>.*" style "murrine-dark-toolbar"
# Toolbar default: light
class "*HandleBox" style "murrine-toolbar"
class "GtkToolbar" style "murrine-toolbar"
widget_class "*HandleBox" style "murrine-toolbar"
widget_class "*<GtkToolbar>.*" style "murrine-toolbar-item"
# Place this fix far above so overrides work better
# Affects: gedit sidebar, GCstar, meld
style "murrine-toolbar-flat"
engine "murrine"
toolbarstyle = 0
widget_class "*.*.*.*.*.*Toolbar*" style "murrine-toolbar-flat"
widget_class "*.*.*.*.*.*HandleBox*" style "murrine-toolbar-flat"
# Toolbar exceptions:
# Browser-type and viewer-type applications get a dark toolbar.
# Everything below the toolbar for these apps are the content. This will make
# a separation on function (toolbar) and content (client area).
# Work around for http://bugzilla.gnome.org/show_bug.cgi?id=382646
style "murrine-text-is-fg-color-workaround"
text[NORMAL] = @fg_color
text[PRELIGHT] = @fg_color
text[SELECTED] = @selected_fg_color
text[ACTIVE] = @fg_color
text[INSENSITIVE] = darker (@bg_color)
widget_class "*.<GtkComboBox>.<GtkCellView>" style "murrine-text-is-fg-color-workaround"
style "murrine-text-is-fg-color-workaround-dark"
#Make it work with this theme!
text[NORMAL] = mix (1.5, @fg_color, '#ffffff')
text[PRELIGHT] = mix (1.4, @fg_color, '#ffffff')
# Nautilus toolbar: dark
widget_class "*Nautilus*Toolbar*" style "pixmap-dark-toolbar"
widget_class "*Nautilus*Tool*GtkButton" style "murrine-dark-toolbar"
widget_class "*Nautilus*Tool*.*.*" style "murrine-dark-toolbar"
widget_class "*Nautilus*Tool*GtkToggleButton" style "murrine-dark-toolbar"
widget_class "*Nautilus*Tool*Separator*" style "murrine-dark-toolbar-sep"
widget_class "*Nautilus*Tool*.<GtkComboBox>.<GtkCellView>" style "murrine-text-is-fg-color-workaround-dark"
# Evince/EOG: dark
widget_class "*EggEditable*Toolbar*" style "pixmap-dark-toolbar"
widget_class "*EggEditable*Toolbar*.*.*.*" style "murrine-dark-toolbar"
widget_class "*EggEditable*Tool*.<GtkComboBox>.<GtkCellView>" style "murrine-text-is-fg-color-workaround-dark"
widget "*fullscreen-toolbar" style "pixmap-dark-toolbar"
widget "*fullscreen-toolbar.*" style "murrine-dark-toolbar"
# Epiphany: dark
widget_class "*EphyToolbar*" style "pixmap-dark-toolbar"
widget_class "*EphyToolbar*.*.*.*" style "murrine-dark-toolbar"
widget_class "*EphyTool*.<GtkComboBox>.<GtkCellView>" style "murrine-text-is-fg-color-workaround-dark"
# F-Spot(?): dark
widget_class "*Spot*Toolbar*" style "pixmap-dark-toolbar"
widget_class "*Spot*Toolbar*.*.*.*" style "murrine-dark-toolbar"
widget_class "*Spot*Toolbar*.<GtkComboBox>.<GtkCellView>" style "murrine-text-is-fg-color-workaround-dark"
# Gedit: Dark
widget_class "*edit*Toolbar*" style "pixmap-dark-toolbar"
widget_class "*edit*Toolbar*.*" style "murrine-dark-toolbar"
widget_class "*edit*Toolbar*.<GtkComboBox>.<GtkCellView>" style "murrine-text-is-fg-color-workaround-dark"
# Brasero: Dark
widget_class "*rasero*Toolbar*" style "pixmap-dark-toolbar"
widget_class "*rasero*Toolbar*.*" style "murrine-dark-toolbar"
widget_class "*rasero*Toolbar*.<GtkComboBox>.<GtkCellView>" style "murrine-text-is-fg-color-workaround-dark"
#gThumb: dark
widget_class "*Gth*Toolbar*" style "pixmap-dark-toolbar"
widget_class "*Gth*Toolbar*.*" style "murrine-dark-toolbar"
widget_class "*Gth*Toolbar*.<GtkComboBox>.<GtkCellView>" style "murrine-text-is-fg-color-workaround-dark"
widget_class "*GthFull*" style "pixmap-dark-toolbar" #Doesn't work
class "GtkSpinButton" style "murrine-spinbutton"
class "GtkScale" style "murrine-scale"
class "GtkVScale" style "murrine-vscale"
class "GtkHScale" style "murrine-hscale"
class "GtkScrollbar" style "murrine-scrollbar"
class "GtkVScrollbar" style "murrine-vscrollbar"
class "GtkHScrollbar" style "murrine-hscrollbar"
class "GtkButton" style "murrine-button"
class "GtkRadioButton*" style "murrine-radiocheck" # SZ07: Added for the checkmarks/radio
class "GtkCheckButton" style "murrine-radiocheck" # SZ07: Added for the checkmarks/radio
# General matching following, the order is choosen so that the right styles override each other
# eg. progressbar needs to be more important then the menu match.
widget_class "*<GtkNotebook>*<GtkEventBox>" style "murrine-notebook-bg"
widget_class "*<GtkNotebook>*<GtkDrawingArea>" style "murrine-notebook-bg"
widget_class "*<GtkNotebook>*<GtkLayout>" style "murrine-notebook-bg"
widget_class "*<GtkNotebook>" style "murrine-notebook"
widget_class "*<GtkComboBoxEntry>*" style "murrine-comboboxentry"
widget_class "*<GtkCombo>*" style "murrine-comboboxentry"
widget_class "*<GtkMenu>*" style "murrine-menu"
widget_class "*<GtkMenuItem>*" style "murrine-menu-item"
widget_class "*<GtkSeparatorMenuItem>*" style "murrine-separator-menu-item"
widget_class "*<GtkFrame>" style "murrine-frame"
widget_class "*.<GtkFrame>.<GtkLabel>" style "murrine-frame-title"
widget_class "*.<GtkTreeView>*" style "murrine-treeview"
widget_class "*<GtkStatusbar>*" style "murrine-wider"
widget_class "*<GtkProgressBar>" style "murrine-progressbar"
# Treeview header
widget_class "*.<GtkTreeView>.<GtkButton>" style "murrine-treeview-header"
widget_class "*.<GtkCTree>.<GtkButton>" style "murrine-treeview-header"
widget_class "*.<GtkList>.<GtkButton>" style "murrine-treeview-header"
widget_class "*.<GtkCList>.<GtkButton>" style "murrine-treeview-header"
#Panel
widget "*PanelWidget*" style "murrine-panel"
widget "*PanelApplet*" style "murrine-panel"
widget "*fast-user-switch*" style "murrine-panel" # Workaround for Fast User Switch applet
class "PanelApp*" style "murrine-panel"
class "PanelToplevel*" style "murrine-panel"
#The panel menubar
widget_class "*Panel*<GtkMenuBar>*" style:highest "murrine-panel"
# The window of the tooltip is called "gtk-tooltip"
widget "gtk-tooltip*" style "murrine-tooltips"
# Special cases and work arounds
# Workarounds for Evolution
widget_class "*.ETable.ECanvas" style "murrine-treeview-header"
widget_class "*.ETree.ECanvas" style "murrine-treeview-header"
#Firefox isn't nice to dark themes, so unset the dark stuff.
widget "MozillaGtkWidget*Toolbar*" style "murrine-default"
#widget "MozillaGtkWidget*Frame*" style "murrine-default"
#Thunderbird too. But since Thunderbird uses the same theming engine as FF2, things are worse for us.
style "murrine-menuitem-text-is-fg-color-workaround"
#text[NORMAL] = @fg_color
#text[PRELIGHT] = @selected_fg_color
#text[SELECTED] = @selected_fg_color
#text[ACTIVE] = @fg_color
#text[INSENSITIVE] = darker (@bg_color)
#Make it work with this theme!
text[NORMAL] = mix (1.5, @fg_color, '#ffffff')
text[PRELIGHT] = mix (1.4, @fg_color, '#ffffff')
widget "*.gtk-combobox-popup-menu.*" style "murrine-menuitem-text-is-fg-color-workaround"
# Work around the usage of GtkLabel inside GtkListItems to display text.
# This breaks because the label is shown on a background that is based on the
# base color set.
style "murrine-fg-is-text-color-workaround"
fg[NORMAL] = @text_color
fg[PRELIGHT] = @text_color
fg[ACTIVE] = @selected_fg_color
fg[SELECTED] = @selected_fg_color
fg[INSENSITIVE] = darker (@bg_color)
widget_class "*<GtkListItem>*" style "murrine-fg-is-text-color-workaround"
# The same problem also exists for GtkCList and GtkCTree
# Only match GtkCList and not the parent widgets, because that would also change the headers.
widget_class "*<GtkCList>" style "murrine-fg-is-text-color-workaround"
style "murrine-evo-new-button-workaround"
engine "murrine"
toolbarstyle = 0
widget_class "EShellWindow.GtkVBox.BonoboDock.BonoboDockBand.BonoboDockItem*" style "murrine-evo-new-button-workaround"
#Rhythmbox toolbar near the search entry. Use default + wide so that it doesn't turn dark.
style "murrine-rhythmbox-header" = "murrine-default"
xthickness = 3
ythickness = 3
engine "murrine" {
widget "*RBSourceHeader*" style:highest "murrine-rhythmbox-header"
widget "*swt*toolbar*" style "murrine-default"
# RSC: Fix for CPU frequency applet
style "applet-text" = "murrine-panel"
fg[NORMAL] = @bg_color
widget_class "*CPUFreqApplet*" style:highest "applet-text"
style "murrine-dialog" = "murrine-dark"
bg[NORMAL] = mix(0.4, @selected_bg_color, shade(0.7, @bg_color))
fg[NORMAL] = shade(0.5, @fg_color)
text[NORMAL] = shade(0.5, @text_color)
style "murrine-dialog-button" = "murrine-dark"
bg[NORMAL] = shade(0.15, @bg_color)
bg[PRELIGHT] = shade(0.18, @bg_color)
# Dialog boxes...?
# widget_class "*Dialog*" style "murrine-dialog"
# widget_class "*Dialog*.*" style "murrine-dialog"
# widget_class "*Dialog*.*Button*" style "murrine-dialog-button"

Errors when loading flat file data

We just test to load a very simple flat file data with only two lines and the two lines of data in preview of InfoSource is correct. But when run InfoPackage to load data, the monitor of the InfoPackage shows the following errors (see in between two dashed lines below):
Error getting SID for ODS object ZDM_SUBS
Activation of data records from ODS object ZDM_SUBS terminated
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Error when assigning SID (details in long text)
Value 'Bottom' (hex. '0042006F00740074006F006D') of characteristic ZRATEPLN contains invalid characters
Value 'Dealer' (hex. '004400650061006C00650072') of characteristic ZCHANNEL contains invalid characters
Value 'Bottom' (hex. '0042006F00740074006F006D') of characteristic ZRATEPLN contains invalid characters
Value '19884/' of characteristic 0DATE is not a number with 000008 spaces
Value '/19812' of characteristic 0DATE is not a number with 000008 spaces
Value '19884/' of characteristic 0DATE is not a number with 000008 spaces
In the flat file (excel sheet saved as a CSV file), for each row of the data, there are two fields which are start_date and end_date and the date format is MM/DD/YYYY and in the Transfer Rule, we transfer the date format from MM/DD/YYYY to YYYYMMDD which is required by DATS InfoObject type in BW. If you need the excel sheet of data in order to answer our questions about the above errors, you can give us your e-mail address and we can send the simple two rows of data excel sheet file to you.
Thanks!

Hi Kevin,
1.You can use lowercase letters in the values for your characteristics provided you have checked the lowercase checkbox in the general tab page of Create characteristic screen.But when you do so no masterdata tables,text tables, or another level of attributes underneath are allowed.
OR
Use only upper case letters in your characteristic unchecking the above mentioned box.
2.The date format in the CSV file should be yyyymmdd.It should have 8 characters . I guess there is something strange in your "calendardays" since I could not find 8 characters irrespective of the order.Do not forget to use zeroes.
Hope this works.
Reward if it is helpful.
Regards,
Balaji

Multiple database in single server

Hi experts,
Please tell me how to configure multiple SID with single listener.
I configured the DR setup of two databases in single server. Now the problem is, if I start one listener from orapm1(CRM), my data is replicating only for CRM, and if I am going to start my listener from oraPE2 user (DBM), error is coming u201C listener is already startu201D but DBM is not replicating with DR site.
And when I stop the listener from oraPM1, and start listener from user oraPE2(DBM), my DBM is replicating properly, I want to start both in parallel with one listener.
Right now I have only one port for both database (1527) and only one LISTENER, should I need to change the port for one server e.g DBM (primary and standby), and then change in listener files. For both side (primary and standby)
If I am correct please let me know the steps, what precautions we need to take.
And what change I need to do in listener file.
2nd) Can I work on same port for both SIDs, if yes please tell me the steps.
My CRM is working properly so I need to change in DBM part.
I am attaching listener file from both users in same server (10.11.230.12)
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER_PE2 =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = PE2.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = PE2)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = 10.11.230.12)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PE2)
(ORACLE_HOME = /oracle/PE2/102_64)
pm1 listener file
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = PM1.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = PM1)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = 10.11.230.12)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PM1)
(ORACLE_HOME = /oracle/PM1/102_64)
Thanks in advance.

Dear Experts,
please tell me is it ok or i need to change something else?
this example is for only one listener, and i put both SID details in same LISTENER, or i need to change the listener name for another server. it is very confusing...
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY = PM1.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
          (KEY = PM1)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = 10.11.230.12)
          (PORT = 1527))
LISTENER =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = IPC)
          (KEY =PE2.WORLD)
        (ADDRESS=
          (PROTOCOL = IPC)
          (KEY = PE2)
        (ADDRESS =
          (COMMUNITY = SAP.WORLD)
          (PROTOCOL = TCP)
          (HOST = 10.11.230.12)
          (PORT = 1528))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PM1)
      (ORACLE_HOME = /oracle/PM1/102_64)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = ON
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PE2)
      (ORACLE_HOME = /oracle/PE2/102_64)
Rishi

Message Mapping And Interface Mapping

Hi,
I have 2 software components.
One is for sender and one is for receiver.I have created all the Data types,Message type and Message Interface fro sender in the first Software component and data types ,message type ,message interface for the receiver in the second software component .
Now, in which Software component should i create Message Mapping and Interface Mapping?
Thanks in Advance,
mvk

Hi,
You could use the created Message type and Message interfaces in Sender as well as receiver software components for creating message mapping, interface mapping and integration scenario.
Generally it makes sense to maintain the message mapping, interface mapping and integration scenario in receiver software component. The message mapping and Integration scenario is specifically based on the receiver end requirments, so its preffered on receiver software component.
The sender side details could be reusable in case if you need those for another new receiver software component. If you maintain it in sender component, then that will lead to mix-up all the things on sender side even though its based on receiver end.
I think this could help you.
In PI7.1 now there is concept of Folders to maintain all the interfaces appropriatly and leads for reusability of existing objects.
Please refer below links for more details,
/people/thorsten.nordholmsbirk/blog/2006/07/25/structuring-integration-repository-content--part-1-software-component-versions
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed903cf6c4492ce10000000a114084/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jan 26, 2008 8:33 AM

SID - details

Similar Messages

Maybe you are looking for