SID in System Copy.

Hi,
We are about to start the Homogeneous system copy. I am very much comfortable with the procedures and the following activities. I have a strange doubt regarding the handling of an SID.
Say, I am having the data to be exported from DEV(Source SID) system to PRD(Target SID). So the Data DEV to be imported into PRD system. So What is the effect on the import of the SID data of DEV to PRD. Do we need to change any settings in the Database\SAP level after the import.
Please Help!!!!

Hello,
Unless you use a DB specific method then the dump which is created when you export the source system will be "SID" independent. You then specify your new SID when you are installing the target system and sapisnt will handle everything with the exception of a few post installation tasks.
If you use a DB specific method the schemas and tables in your database will reflect the SID of the source system, this is not necessarily a problem and will work with the new system SID. However, if you wish you can change this at DB level aswell.
Regards,
David
Please reward with points if helpfull

Similar Messages

How to change the SID during system copy

This blog /people/johannes.heinrich/blog/2006/07/07/new-features-in-db2-udb-v9--part-3 (i.e. the "new feature of V9" in this group) only
talk about the system copy without changing the SID.
In reality, we often want to change the SID during the system copy. Can we modify the script mentioned in above blog
to make SID change possible?
Thanks!

Hi Christy,
if you´re using export/import which is prefered you can change the sid during the parameter setting for export and import. You´ll be asked by the old sid and the new sid. For the tablespace names it is not so important because db2 is using tablespace id not the name for the internal administration.
Regards
Olaf

RSA1 infosources under wrong SID after system copy and BDLS has run

Hi we are a BW3.5 SP#21 system on 10202 and hpux 11.23 (ia64). We have an R/3 system connected to the BW system for extracts. Extracts work fine in the productive environment. So 1 production BW system, and 1 production R/3 system. We also have sandbox copies of each made from database copies recently. The environment is as follows:
sid     client     current logical system name     original logical system name after "copy"     system role
BW1     100     FINPBW1100     --     Productive BW system
LH1     100     FINPLH1100     --     Productive R/3 system
LHU     100     FINPLHU100     FINPBW1100     sandbox BW system
LHI     100     FINPLHI100     FINPLH1100     sandbox R/3 system
LHU is a copy of BW1. LHI is a copy of LH1. There is only 1 working client in all systems.
We recently did the copies, creating the LHU/LHI systems. we've completed our "post refresh" checklist on LHU/LHI, including the BDLS work.
BDLS was ran as follows on LHU/100:
>> convert FINPBW1100  FINPLHU100
>> convert FINPLH1100  FINPLHI100
BDLS was ran as follows on LHI/100:
>> convert FINPBW1100  FINPLHU100
>> convert FINPLH1100  FINPLHI100
In RSA1 on sandbox LHU/100, in the "source system" area, the source systems to the sandbox R/3 system LHI/100 tests out ok if you do the check connection and the technical name for the sm59 it points to is correct.
If I check the RSA1 --> Infosources though, and search for LHI.it doesn't find all the "expected" infosources/infopackages.
If instead I search for LH1 it finds the whole list of "expected" infosources/infopackages. But the R/3 system i'm trying to do extracts from is called "LHI" not "LH1".
QUESTION:
does anyone know what needs to happen to convert what we see in RSA1 --> Infosources when searching for LH1 to infosources that we can use which point to LHI it looks like all the data is there in RSA1 -->infosources, it just is under the wrong sid.thanks in advance

Hi Ben,
Sorry to hear that my suggestion did not help. We will have to see what the other experts say!
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
That link is to the document that I followed when setting up a BWQ system new, and we didn't encounter the same problem that you are experiencing. We are also BW 3.5.
I started on Page 17 which is where Section 3.7 starts.
Hopefully that might help, although that may have been what you were following.
Nick

Assertion failed: Unable to load database SID during sybase system copy on Linux in the phase "Create DB"

Hi Supports,
I am using sapinst homogeneous system copy in Linux on sybase.
I stuck on the the step 27/49 "create Database".
I checked Firewall is off.
i got points in my sapinst_dev.log that "
1)The log segment in the target database 'SID' is too small (9216 MB) to accommodate the log segment from the dumped database (10240 MB)"
and
2)"Can't change the owner of the master, model, tempdb or sybsystemprocs database"
Do i need to increase "sybase/SID/saplog_1" ? because my "saplog_1" is 49 mb now.
if it is ! how do i increase in this stage.
can any one know about this error???
Thanks,
Aziz.

Hi,
When i seen SID.log file so its showing deadlock and checkpoint occurring,
Is any solution ???
Is this because of networks?
we had 2 servers on this same IP. but i stopped one server and one is still running.
please find my SID.log file and revert back if any soltion.
==========================================================
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.03.21 12:12:31 =~=~=~=~=~=~=~=~=~=~=~=
ibssrv02:/sybase/IB1/ASE-15_0/install #
ibssrv02:/sybase/IB1/ASE-15_0/install # lscd ASE-15_0/install/lscd IB1lscd /IB1sybase/df -hexitsu - sybib1lscd IB1ls
IB1.log IB1_BS.log IB1_JSAGENT.log RUN_IB1 RUN_IB1_BS auditinit setperm_all showserver startserver sybhauser veritas
ibssrv02:/sybase/IB1/ASE-15_0/install # more IB1.log
00:0000:00000:00000:2014/03/21 11:03:36.98 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Checked out license ASE_CORE
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2014/03/21 11:03:37.00 kernel Performing space allocation for device '/sybase/IB1/sybsystem/master.dat' (0.39 Gb). This may take some time.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Finished initialization.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Using config area from primary master device.
00:0000:00000:00000:2014/03/21 11:03:38.32 server Configuration Error: Configuration file, '/sybase/IB1/IB1.cfg', does not exist.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Warning: A configuration file was not specified or the default file '/sybase/IB1/IB1.cfg' does not exist. ASE creates
the default file.
00:0000:00000:00000:2014/03/21 11:03:38.32 kernel Warning: Using default file '/sybase/IB1/IB1.cfg' since a configuration file was not specified. Specify a configurati
on file name in the RUNSERVER file to avoid this message.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
after configuring enough Huge Pages.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Internal run-time model set for Linux - Native
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Adaptive Server is using the threaded kernel mode.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Using 4096 file descriptors.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun 6
16:08:18 2013
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Confidential property of Sybase, Inc.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Copyright 1987, 2013
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Sybase, Inc. All rights reserved.
00:0000:00000:00000:2014/03/21 11:03:38.33 kernel Unpublished rights reserved under U.S. c 1702]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1718]: executing SQL statement ("update master.dbo.sysusages set loc..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1719]: executing SQL statement ("update sysattributes set object_inf..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1720]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1730]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1731]: executing SQL statement ("begin declare @val int select @val=..
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'master': beginning upgrade step [ID 1740]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'model' does not exist. ASE will create it.
--More--(11%)
00:0006:00000:00001:2014/03/21 11:03:39.77 server Database 'model': beginning upgrade step [ID     1]: Initialize disk and create empty allocation units on master devi
ce.
00:0006:00000:00001:2014/03/21 11:03:39.79 server Database 'model': beginning upgrade step [ID     2]: Bootstrap basic system catalogs in database.
00:0006:00000:00001:2014/03/21 11:03:39.79 server Database 'model': beginning upgrade step [ID     6]: creating index (table syspartitions, index ncsyspartitions)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID     8]: creating index (table systypes, index ncsystypes)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID    10]: creating index (table sysobjects, index ncsysobjects)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID    13]: creating table (table systabstats)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID    26]: creating table (table sysprocedures)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID    27]: creating table (table syscomments)
00:0006:00000:00001:2014/03/21 11:03:39.80 server Database 'model': beginning upgrade step [ID    28]: creating table (table syssegments)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID    29]: creating table (table sysprotects)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID    30]: creating table (table sysusers)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID    31]: creating table (table sysalternates)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID    32]: creating table (table sysdepends)
00:0006:00000:00001:2014/03/21 11:03:39.81 server Database 'model': beginning upgrade step [ID    33]: creating table (table syskeys)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID    47]: creating table (table syspartitionkeys)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID    51]: creating table (table sysreferences)
00:0006:00000:00001:2014/03/21 11:03:39.82 server Database 'model': beginning upgrade step [ID    52]: creating table (table sysconstraints)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID    53]: creating table (table sysusermessages)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID    54]: creating table (table systhresholds)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID    55]: creating table (table sysroles)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID    56]: creating table (table sysslices)
00:0006:00000:00001:2014/03/21 11:03:39.83 server Database 'model': beginning upgrade step [ID    60]: creating table (table sysstatistics)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID    61]: creating table (table sysxtypes)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID    62]: creating table (table sysjars)
00:0006:00000:00001:2014/03/21 11:03:39.84 server Database 'model': beginning upgrade step [ID    65]: creating table (table sysqueryplans)
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID    68]: creating table (table sysencryptkeys)
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID    73]: executing SQL statement ("update sysobjects set sysstat = sys...
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID    74]: executing SQL statement ("update syscolumns set type=66, user...
00:0006:00000:00001:2014/03/21 11:03:39.85 server Database 'model': beginning upgrade step [ID    80]: creating table (table sysattributes)
00:0006:00000:00001:2014/03/21 11:03:39.86 server Database 'model': beginning upgrade step [ID    82]: creating table (table sysdams)
00:0006:00000:00001:2014/03/21 11:03:39.86 server Database 'model': beginning upgrade step [ID    90]: insert basic data into bootstrap system tables
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID    91]: executing SQL statement ("update systypes set length=@@maxpag...
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID   245]: Update system roles in system tables.
00:0006:00000:00001:2014/03/21 11:03:39.89 server Database 'model': beginning upgrade step [ID   248]: update system catalog protection data
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID   606]: executing SQL statement ("select lct_admin('lastchance', db_i...
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1126]: Initialize systabstats with valid statistics
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1131]: Creating/Updating the last chance threshold for logsegment.
00:0006:00000:00001:2014/03/21 11:03:39.90 server Database 'model': beginning upgrade step [ID 1274]: executing SQL statement ("declare @dummy int")
--More--(13%)
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1241]: executing SQL statement ("insert into sysattributes (class, a...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1400]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1411]: executing SQL statement ("if not exists (select 1 from master...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1416]: executing SQL statement ("update sysroles set id=11 from sysu...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1502]: executing SQL statement ("if exists (select 1 from sysobjects...
00:0006:00000:00001:2014/03/21 11:03:39.91 server Database 'model': beginning upgrade step [ID 1503]: executing SQL statement ("create view sysquerymetrics (uid, g...
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1505]: executing SQL statement ("update sysattributes set char_value...
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1550]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1554]: upgrade simulated statistics
00:0006:00000:00001:2014/03/21 11:03:39.92 server Database 'model': beginning upgrade step [ID 1564]: executing SQL statement ("declare @dbid int select @dbid = db...
00:0006:00000:00001:2014/03/21 11:03:39.93 server Database 'model': beginning upgrade step [ID 1650]: executing SQL statement ("dbcc upgd_grantrev_sysrole_perms('g...
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1651]: updating builtin permissions
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1652]: adding generic user 'usedb_user' to sysusers
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1653]: updating DBCC command permissions
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1702]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1719]: executing SQL statement ("update sysattributes set object_inf...
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1720]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1730]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server Database 'model': beginning upgrade step [ID 1740]: noting the present database upgrade level
00:0006:00000:00001:2014/03/21 11:03:39.97 server CREATE DATABASE: allocating 1536 logical pages (24.0 megabytes) on disk 'master' (1536 logical pages requested).
00:0006:00000:00001:2014/03/21 11:03:39.97 server Warning: The database 'sybsystemdb' is using an unsafe virtual device 'master'. The recovery of this database can not
be guaranteed.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Timestamp for database 'sybsystemdb' is (0x0000, 0x000013b4).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database sybsystemdb successfully created.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Recovering database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Database 'sybsystemdb', checkpoint=(864, 64), first=(864, 64), last=(864, 150).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database sybsystemdb.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 86.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Redo pass of recovery has processed 2 committed and 0 aborted transactions.
--More--(15%)
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed REDO pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Timestamp for database 'sybsystemdb' is (0x0000, 0x00001416).
00:0006:00000:00001:2014/03/21 11:03:39.99 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Started filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:39.99 server Completed filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Started cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Completed cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Boot Count: 1
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:40.00 server Now loading ASE's new default sort order and character set
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
--More--(17%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
--More--(18%)
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysobjects' (object ID 1): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysobjects_1' (partition ID 1) of table 'sysobjects'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'systypes' (object ID 4): Logical page size is 16384 bytes.
--More--(20%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'systypes_4' (partition ID 4) of table 'systypes'. The logical page size of this table is 16384 by
tes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysusers' (object ID 10): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysusers_10' (partition ID 10) of table 'sysusers'. The logical page size of this table is 16384
bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysreferences' (object ID 16): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysreferences_16' (partition ID 16) of table 'sysreferences'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysattributes' (object ID 21): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysattributes_21' (partition ID 21) of table 'sysattributes'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysxtypes' (object ID 25): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysxtypes_25' (partition ID 25) of table 'sysxtypes'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysjars' (object ID 26): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysjars_26' (partition ID 26) of table 'sysjars'. The logical page size of this table is 16384 by
tes.
--More--(21%)
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syspartitions' (object ID 28): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syspartitions_28' (partition ID 28) of table 'syspartitions'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysdatabases' (object ID 30): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysdatabases_30' (partition ID 30) of table 'sysdatabases'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'syslogins' (object ID 33): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'syslogins_33' (partition ID 33) of table 'syslogins'. The logical page size of this table is 1638
4 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysdevices' (object ID 35): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysdevices_35' (partition ID 35) of table 'sysdevices'. The logical page size of this table is 16
384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysconfigures' (object ID 37): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking partition 'sysconfigures_37' (partition ID 37) of table 'sysconfigures'. The logical page size of this table
is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.00 server
00:0006:00000:00001:2014/03/21 11:03:40.00 server Checking table 'sysservers' (object ID 40): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysservers_40' (partition ID 40) of table 'sysservers'. The logical page size of this table is 16
384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'sysremotelogins' (object ID 41): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysremotelogins_41' (partition ID 41) of table 'sysremotelogins'. The logical page size of this t
able is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syslanguages' (object ID 44): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
--More--(23%)
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syslanguages_44' (partition ID 44) of table 'syslanguages'. The logical page size of this table i
s 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'syscharsets' (object ID 45): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'syscharsets_45' (partition ID 45) of table 'syscharsets'. The logical page size of this table is
16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking table 'sysresourcelimits' (object ID 52): Logical page size is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Checking partition 'sysresourcelimits_52' (partition ID 52) of table 'sysresourcelimits'. The logical page size of th
is table is 16384 bytes.
00:0006:00000:00001:2014/03/21 11:03:40.01 server
00:0006:00000:00001:2014/03/21 11:03:40.01 server Default Sort Order successfully changed.
00:0006:00000:00001:2014/03/21 11:03:40.01 server ASE shutdown after verifying System Indexes.
00:0006:00000:00001:2014/03/21 11:03:40.01 kernel ueshutdown: exiting
00:0000:00000:00000:2014/03/21 11:03:40.01 kernel Main thread performing final shutdown.
00:0000:00000:00000:2014/03/21 11:03:40.06 kernel Blocking call queue shutdown.
00:0000:00000:00000:2014/03/21 11:03:40.21 kernel SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:40.98 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_DE.li
c:/sybase/IB1/SYSAM-2_0/licenses/SYBASE_ASE_XE.lic
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel SySAM: Checked out license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Checked out license ASE_CORE
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Using config area from primary master device.
00:0000:00000:00000:2014/03/21 11:03:41.00 kernel Could not allocate memory using Huge Pages. Allocated using regular pages. For better performance, reboot the server
after configuring enough Huge Pages.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Internal run-time model set for Linux - Native
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server is using the threaded kernel mode.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using 4096 file descriptors.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server Enterprise/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/FBO/Thu Jun 6
16:08:18 2013
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Confidential property of Sybase, Inc.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Copyright 1987, 2013
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Sybase, Inc. All rights reserved.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Unpublished rights reserved under U.S. copyright laws.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel This software contains confidential and trade secret information of Sybase,
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Inc.   Use, duplication or disclosure of the software and documentation by
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel the U.S. Government is subject to restrictions set forth in a license
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel agreement between the Government and Sybase, Inc. or other written
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel agreement specifying the Government's rights to use the software and any
--More--(24%)
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel applicable FAR provisions, for example, FAR 52.227-19.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using /sybase/IB1 as the 'SYBASE' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using ASE-15_0 as the 'SYBASE_ASE' environment variable, found during startup.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE booted on host 'ibssrv02' running Linux release 3.0.13-0.27-default version #1 SMP Wed Feb 15 13:33:49 UTC 2012 (
d73692b).
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Using '/sybase/IB1/ASE-15_0/IB1.cfg' for configuration information.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Logging ASE messages in file '/sybase/IB1/ASE-15_0/install/IB1.log'.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Disk Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Network Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Ct-Lib Controller Manager is online.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Platform TCP network support seems IPv4-only.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE booted with TCP_NODELAY enabled.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Network and device connection limit is 4081.
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel ASE - Dynamic Pluggable Component Interface is disabled
00:0000:00000:00000:2014/03/21 11:03:41.01 kernel Adaptive Server is running as process id 25438.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Number of blocks left for proc headers: 6920.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Proc header memory allocated 1384 pages for each per engine cache.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Proc header memory allocated 1384 pages for engine 0 local cache
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Using value of 'number of engines at startup' (1) for size of syb_default_pool.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 3, "syb_blocking_pool", type="Run To Completion", with 4 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 2, "syb_system_pool", type="Run To Completion", with 1 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Create Thread Pool 1, "syb_default_pool", type="Engine (Multiplexed)", with 1 threads
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Aggressive task stealing enabled
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Enabling Linux Native Kernel asynchronous disk I/O strategy.
00:0007:00000:00000:2014/03/21 11:03:41.05 kernel I/O controller 2 (NetController) is running as task 1127909376 on thread 7 (LWP 25453).
00:0008:00000:00000:2014/03/21 11:03:41.05 kernel I/O controller 3 (DiskController) is running as task 1127910096 on thread 8 (LWP 25454).
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Initializing virtual device 0, '/sybase/IB1/sybsystem/master.dat' with dsync 'off'.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Virtual device 0 started using asynchronous i/o.
00:0000:00000:00000:2014/03/21 11:03:41.05 server Loaded default Unilib conversion handle.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Worker Thread Manager is not enabled for use in ASE.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mec
hanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
00:0000:00000:00000:2014/03/21 11:03:41.05 kernel libsybibmmq - Sybase IBM MQ interface/15.7/EBF 21341 SMP SP101 /P/x86_64/Enterprise Linux/ase157sp101/3439/64-bit/OPT
/Thu Jun 6 12:02:54 2013
00:0000:00000:00000:2014/03/21 11:03:41.08 kernel Loaded encryption provider CSI-2.8M2-linuxamd64-2012/12/27 21:15:59 PST-sybcsi_openssl-OpenSSL 1.0.1b 26 Apr 2012.
00:0000:00000:00000:2014/03/21 11:03:41.08 kernel Begin processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.11 kernel Completed processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.11 kernel Begin processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel Completed processing to generate RSA keypair.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel Encryption provider initialization succeeded on engine 0.
00:0000:00000:00000:2014/03/21 11:03:41.28 kernel SSL Plus v5.2.2 security modules loaded successfully.
--More--(26%)
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel Network and device connection limit is 4081.
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel ASE - Dynamic Pluggable Component Interface is disabled
00:0006:00000:00000:2014/03/21 11:03:41.28 kernel Thread 6 (LWP 25447) of Threadpool syb_default_pool online as engine 0
00:0006:00000:00000:2014/03/21 11:03:41.28 server Active traceflags: 1623
00:0006:00000:00001:2014/03/21 11:03:41.28 kernel libomni1 - Component Integration Services: using 'Sybase Client-Library/15.7/P-EBF21002 SP100/DRV.15.7.0.10/Linux x86
_64/Linux 2.6.18-128.el5 x86_64 Native Threads/BUILD1570-026/64bit/OPT/Wed Mar 20 21:34:36 2013'
00:0006:00000:00001:2014/03/21 11:03:41.28 server Size of the 16K memory pool: 8192 Kb
00:0006:00000:00001:2014/03/21 11:03:41.28 server Opening Master Database ...
00:0006:00000:00001:2014/03/21 11:03:41.29 server Loading ASE's default sort order and character set
00:0006:00000:00001:2014/03/21 11:03:41.29 server Recovering database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started estimating recovery log boundaries for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Database 'master', checkpoint=(1634, 132), first=(1634, 132), last=(1634, 173).
00:0006:00000:00001:2014/03/21 11:03:41.29 server Completed estimating recovery log boundaries for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started ANALYSIS pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Completed ANALYSIS pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database master.
00:0006:00000:00001:2014/03/21 11:03:41.29 server Started REDO pass for database 'master'. The total number of log records to process is 42.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Redo pass of recovery has processed 7 committed and 0 aborted transactions.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed REDO pass for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Timestamp for database 'master' is (0x0000, 0x00006ec9).
00:0006:00000:00001:2014/03/21 11:03:41.30 server Recovery of database 'master' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started recovery checkpoint for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed recovery checkpoint for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started filling free space info for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed filling free space info for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Started cleaning up the default data cache for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Completed cleaning up the default data cache for database 'master'.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:41.30 server Database 'master' is now online.
00:0006:00000:00001:2014/03/21 11:03:41.30 server The transaction log in the database 'master' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:41.37 server server is unnamed
00:0006:00000:00001:2014/03/21 11:03:42.06 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.001'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovering database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'sybsystemdb', checkpoint=(864, 170), first=(864, 170), last=(864, 170).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed estimating recovery log boundaries for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed ANALYSIS pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Log contains all committed transactions until 2014/03/21 11:03:40.01 for database sybsystemdb.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed REDO pass for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Timestamp for database 'sybsystemdb' is (0x0000, 0x0000142f).
--More--(28%)
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed recovery checkpoint for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed filling free space info for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed cleaning up the default data cache for database 'sybsystemdb'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Boot Count: 2
00:0006:00000:00001:2014/03/21 11:03:42.07 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:42.07 server The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Resident Node id: fb18efb51d00
00:0006:00000:00001:2014/03/21 11:03:42.07 server Transaction coordinator initialized.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'sybsystemdb' is now online.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovering database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started estimating recovery log boundaries for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Database 'model', checkpoint=(864, 59), first=(864, 59), last=(864, 77).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed estimating recovery log boundaries for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started ANALYSIS pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed ANALYSIS pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Log contains all committed transactions until 2014/03/21 11:03:39.33 for database model.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started REDO pass for database 'model'. The total number of log records to process is 19.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Redo pass of recovery has processed 4 committed and 0 aborted transactions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed REDO pass for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Timestamp for database 'model' is (0x0000, 0x000013cb).
00:0006:00000:00001:2014/03/21 11:03:42.07 server Recovery of database 'model' will undo incomplete nested top actions.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started recovery checkpoint for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed recovery checkpoint for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started filling free space info for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed filling free space info for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Started cleaning up the default data cache for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Completed cleaning up the default data cache for database 'model'.
00:0006:00000:00001:2014/03/21 11:03:42.07 server Checking external objects.
00:0006:00000:00001:2014/03/21 11:03:42.08 server The transaction log in the database 'model' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.08 server Database 'model' is now online.
00:0006:00000:00001:2014/03/21 11:03:42.08 server The logical pagesize of the server is 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.08 server 0 dump conditions detected at boot time
00:0006:00000:00001:2014/03/21 11:03:42.08 server Clearing temporary database 'tempdb'.
00:0006:00000:00001:2014/03/21 11:03:42.09 server Tempdb 2 is added to the list of local temporary databases
00:0006:00000:00001:2014/03/21 11:03:42.09 server Timestamp for database 'tempdb' is (0x0000, 0x000013ce).
00:0006:00000:00001:2014/03/21 11:03:42.10 server The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
00:0006:00000:00001:2014/03/21 11:03:42.10 server Database 'tempdb' is now online.
00:0006:00000:00009:2014/03/21 11:03:42.10 kernel network name ibssrv02, interface IPv4, address 192.168.2.6, type tcp, port 7905, filter NONE
00:0006:00000:00001:2014/03/21 11:03:42.10 server Recovery complete.
--More--(30%)
00:0006:00000:00001:2014/03/21 11:03:42.10 server ASE's default unicode sort order is 'binary'.
00:0006:00000:00001:2014/03/21 11:03:42.10 server ASE's default sort order is:
00:0006:00000:00001:2014/03/21 11:03:42.10 server 'bin_iso_1' (ID = 50)
00:0006:00000:00001:2014/03/21 11:03:42.10 server on top of default character set:
00:0006:00000:00001:2014/03/21 11:03:42.10 server 'iso_1' (ID = 1).
00:0006:00000:00001:2014/03/21 11:03:42.10 server Master device size: 400 megabytes, or 204800 virtual pages. (A virtual page is 2048 bytes.)
00:0006:00000:00001:2014/03/21 11:03:42.10 kernel Warning: Cannot set console to nonblocking mode, switching to blocking mode.
00:0006:00000:00001:2014/03/21 11:03:42.10 kernel Console logging is disabled. This is controlled via the 'enable console logging' configuration parameter.
00:0006:00000:00015:2014/03/21 11:03:54.09 kernel Initializing virtual device 1, '/sybase/IB1/sybsystem/sysprocs.dat' with dsync 'off'.
00:0006:00000:00015:2014/03/21 11:03:54.09 kernel Virtual device 1 started using asynchronous i/o.
00:0006:00000:00015:2014/03/21 11:03:55.01 server Timestamp for database 'sybsystemprocs' is (0x0000, 0x000013ce).
00:0006:00000:00015:2014/03/21 11:03:55.13 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.002'.
00:0006:00000:00015:2014/03/21 11:03:55.13 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:03:55.14 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.003'.
00:0006:00000:00015:2014/03/21 11:03:55.15 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:03:55.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.004'.
00:0006:00000:00015:2014/03/21 11:03:55.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:22.28 server Increase the config parameter 'number of open objects' to avoid descriptor reuse. Reuse may result in performance deg
radation.
00:0006:00000:00015:2014/03/21 11:04:24.34 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.005'.
00:0006:00000:00015:2014/03/21 11:04:24.34 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:04:24.88 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.006'.
00:0006:00000:00015:2014/03/21 11:04:24.88 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:24.89 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.007'.
00:0006:00000:00015:2014/03/21 11:04:24.90 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00015:2014/03/21 11:04:24.90 kernel Initializing virtual device 2, '/sybase/IB1/sybsystem/sybsysdb.dat' with dsync 'off'.
00:0006:00000:00015:2014/03/21 11:04:24.90 kernel Virtual device 2 started using asynchronous i/o.
00:0006:00000:00015:2014/03/21 11:04:24.95 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.008'.
00:0006:00000:00015:2014/03/21 11:04:24.95 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00015:2014/03/21 11:04:25.05 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.009'.
00:0006:00000:00015:2014/03/21 11:04:25.05 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00017:2014/03/21 11:04:27.11 kernel Initializing virtual device 3, '/sybase/IB1/sybtemp/tempdbdev.dat' with dsync 'off'.
00:0006:00000:00017:2014/03/21 11:04:27.11 kernel Virtual device 3 started using asynchronous i/o.
00:0006:00000:00018:2014/03/21 11:04:27.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.010'.
--More--(32%)
00:0006:00000:00018:2014/03/21 11:04:27.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00018:2014/03/21 11:04:27.19 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.011'.
00:0006:00000:00018:2014/03/21 11:04:27.19 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00019:2014/03/21 11:04:28.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.012'.
00:0006:00000:00019:2014/03/21 11:04:28.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00019:2014/03/21 11:04:28.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.013'.
00:0006:00000:00019:2014/03/21 11:04:28.18 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00020:2014/03/21 11:04:29.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.014'.
00:0006:00000:00020:2014/03/21 11:04:29.17 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00020:2014/03/21 11:04:29.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.015'.
00:0006:00000:00020:2014/03/21 11:04:29.19 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00021:2014/03/21 11:04:30.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.016'.
00:0006:00000:00021:2014/03/21 11:04:30.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00021:2014/03/21 11:04:30.18 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.017'.
00:0006:00000:00021:2014/03/21 11:04:30.18 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00017:2014/03/21 11:04:31.15 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.018'.
00:0006:00000:00017:2014/03/21 11:04:31.15 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '0' to '1'.
00:0006:00000:00017:2014/03/21 11:04:31.16 server Configuration file '/sybase/IB1/ASE-15_0/IB1.cfg' has been written and the previous version has been renamed to '/syb
ase/IB1/ASE-15_0/IB1.019'.
00:0006:00000:00017:2014/03/21 11:04:31.16 server The configuration option 'allow updates to system tables' has been changed by 'sa' from '1' to '0'.
00:0006:00000:00025:2014/03/21 11:04:35.24 server Shutdown started by user 'sa'. SQL text: shutdown
00:0006:00000:00025:2014/03/21 11:04:35.25 server ASE shutdown by request.
00:0006:00000:00025:2014/03/21 11:04:35.25 kernel ueshutdown: exiting
00:0000:00000:00000:2014/03/21 11:04:35.25 kernel Main thread performing final shutdown.
00:0000:00000:00000:2014/03/21 11:04:35.30 kernel Blocking call queue shutdown.
00:0000:00000:00000:2014/03/21 11:04:35.45 kernel SySAM: Checked in license for 6 ASE_CORE (2014.1231/permanent/1296 8FE3 0A83 A167).
00:0000:00000:00000:2014/03/21 11:04:36.50 kernel SySAM: Using licenses from: /sybase/IB1/SYSAM-2_0/licenses/SYBASE.lic:/sybase/IB1/SYSAM-2_0/licenses/SYBASE

System copy: RZ21 MTE has source SID and not the target SID

An system copy of PRD to QAS environment has been performed.
Since then receive the following message in the CCMS Monitor sets (trx RZ20):
Unable to determine the name of MTE class from <SID>\Background\...\SAP_SRT_COLLECTOR_FOR_MONITORIN or the message "Failed to determine MTE information for system QAS"
Checked and in the transaction RZ21 the MTE class is pointing to the PRD system and not to the QAS system:
RZ21 -> MTE-specific properties
Monitoring: Properties Assigned to MTEs
RZ21 -> Methods assigned to specific MTEs
Monitoring: Properties and Methods
Unable to determine the name of MTE class from PRD\Background\...\SAP_SRT_COLLECTOR_FOR_MONITORIN
I would expect here the value "QAS\Background\...\SAP_SRT_COLLECTOR_FOR_MONITORIN".
How can I adjust the MTE to check the QAS instead of the source system PRD ?

Received following answer from SAP:
we can find out the follow errors from the dev_disp developer trace file you attached.
ERROR => e=13 semop(1048668,(0,-1,4096),1)
(13: Permission denied) [semux.c 1196]
ERROR => CCMS: AlCreateAttachShm_AS : lock semaphore return 1
[alxxappl.c 665]
ERROR => CCMS: sAlInit: could not create/attach shared memory key 13(rtc = 1) [alxx.c 1187]
ERROR => AlDpAdmInit: sAlInit rtc = 1 [alxx.c 514]
ERROR => DpLoopInit: AlDpAdmInit [dpxxdisp.c 2033]
The shared memory area 13 is the one that is responsible for the alert area.
An error within that area could cause the problem that you are facing when opening monitoring trees.
If we look at your OS, we can see that the semaphore for this area is currently being held by the root user:
[1]ipcs | grep 1048668
s 1048668 0x00004e46 ra-r root system
You need to delete this area with root user using ipcrm and restart the instace or to reboot the OS and start the instance once again.
Performed these actions and the issue was solved.

The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

Dear Gurus,
We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
We updated the Kernel to the latest, but still no luck.
Request for your quick help as we have to complete it by EOD today.
Thanks a lot in advance.
Best Regards,
Anuj

Hello Ashutosh ,
Thanks for your reply.
We have gone followed the below sequence:
SCS Installation
Database Instance Installation using backup/restore method
CI installation. -> getting error, when we provide the Java Components DVD.
Best Regards,
Anuj

System copy same sid

Dear all
This is the possible for the same *sid* for the Quality and production server .
any problem if taken lisence from the same SID. From SAP
thanks
with regards
venkat

Hi Venkat, there's a database procedure to make System Copies.
You'll find it at http://service.sap.com/instguides (SAP Netweaver -> SAP Netweaver 7.0 -> Installation -> System Copy for SAP Systems)
If you have any other question, please post it here.
Regards,
Darwin Castillo
SAP Netweaver System Administrator
Santo Domingo, Dominican Republic

SWPM - System Copy - Assertion Failed Unable to load database

Hello again,
(already the next question form me, sorry for this
I am executing a sysetm copy (DB-refresh) on ASE using SWPM.
However, in "Configure Components" step I get the error: Assertion failed. Unable to load database <SID of Target Sysetm>.
Where else can I check for errors?
I think it is still something on which I already worked (with other thread).
In sapinst_dev.log I found this
TRACE 2015-03-25 11:05:00.320
SAPInst calls the LogInquirer. The output of the LogInquirer can be found in file sapinst_loginquirer.log.
TRACE 2015-03-25 11:05:06.122 [iaxxgenimp.cpp:638]
 CGuiEngineImp::showMessageBox()
<html> <head> </head> <body> An error occurred while processing option SAP Enhancement Package 1 for SAP N
etWeaver 7.3 > SAP ASE > System Copy > Target System > Standard System > Based on AS ABAP > Database Refresh or M
ove( Last error reported by the step: Assertion failed: Unable to load database <SID>.). You can now: <ul>
<li> Choose Retry to repeat the current step. </li> <li> Choose Log Files to get more inform
ation about the error. </li> <li> Stop the option and continue later. </li> </ul> Log files are written to /t
mp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF. </body></html>
TRACE 2015-03-25 11:05:06.124 [iaxxgenimp.cpp:1031]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
In sapinst.log I found this:
ERROR 2015-03-25 11:04:59.573
FCO-00011 The step syb_step_setup_preload with step key |NW_ABAP_DB_DBRefresh|ind|ind|ind|ind|0|0|NW_ABAP_DB|ind
|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_S
YB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_setup_preload was executed with status ERROR ( Last error reporte
d by the step: Assertion failed: Unable to load database <SID>.).
INFO 2015-03-25 11:04:59.772
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/__instana_tmp.xml.
INFO 2015-03-25 11:05:00.307
Removed file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.
INFO 2015-03-25 11:05:00.308
Creating file /tmp/sapinst_instdir/NW731/SYB/COPY/SYSTEM/STD/AS-ABAP/REF/instslana.xml.

Hello Kiran,
I did a few tests again yesterday, and it was really a stupid mistake from myside.
The error message did mean, that there wasn't enough space.
It isn't the authority issue, it was a leak of space.
FYI, the complete DB-Size of Source System is required - NOT JUST RESERVED SPACE!!!
Thx for help and sorry for stealing your time :O

PI 7.11 sp6 system copy causes target sys to register with source

Experts,
We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g.
I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT).
I used the most recenty PI system copy guide that is specific for PI 7.1 EHP1
I did not run into any major problems doing the steps of the itself.
I did the usual "post" steps, documented in the guide that really are done on any NW system.
Then I got into the specific "PI" post steps and that's where I now have a problem.
I could not run the "wizard for post copy" since I'm on 7.11sp6. Yes, I know they "downported" it but I don't have those latest LMtools type packages. Anyway, I'm OK with that.
I followed all the steps, fixing my RFCs, JCos, Destinations, cleaning up SLD, SLDAPICUST, creating new business systems...etc.
My big problem is with the exchange profile. Yes, it's easy to change all the SIDs and hostnames using the search tool for all the parameters in the exchange profile, but the one I COULD NOT CHANGE was the "ABAP Connection". In there right after the copy was the hostname of the prod system, the client, and the user PILDUSER. I attempted to put the hostname of my target (PIT) system, but I would get the error:
RFC 399 unable to connect
I'm certain the user is NOT locked and the password is correct for PILDUSER.
Worse yet, If I left the hostname in there that was set to "prod", then when I changed all the other values in the "parameters" section of the XI profile, then it actually changed my PROD system!!
If I keep the ABAP connection to PIT, then the entire exchange profile disappears for PIT.
Also, now my PROD system shows the PIT system as a "non-central adapter engine".
Ughh! I'm totally stuck. I'm not sure what to do.
It's as if the PIT (PI training) system somehow is linked to PIP (PI prod). It's like PIT doesn't think he is his own box...
Any ideas? I'm resisting opening a message because this will be so hard to explain to sap support.
--NICK

Hi Nick,
We went thru the same issue. Fortunately, it was between Dev to sandbox. I stopped the dev system and changed the exchange profile parameters to sandbox hostname and brought the Dev up to fix the issue.
Prod showing as Non-Central Adapter engine :- Check your Business System in SLD and In CIM Instances in SLD, check your XI Integration server assigned to right Business System.
Note 764176 - Error in XI due to inconsistent SLD contents :- helped me come over PI post step issues.
Thanks,
Arjun

PI 7.11 sp6 system copy Exchange Profile error code: 399

Experts,
We have a PI 7.1 (EHP1, sp6) PI system based on AIX 6.1 OS and Oracle 11g.
I recently did the standard PI system copy from a prod source (PIP) to a training target (PIT).
I used the most recenty PI system copy guide that is specific for PI 7.1 EHP1
I did not run into any major problems doing the steps of the copy itself.
I did the usual "post" steps, documented in the guide that really are done on any NW system.
Then I got into the specific "PI" post steps and that's where I now have a problem.
I followed all the steps, fixing my RFCs, JCos, Destinations, cleaning up SLD, SLDAPICUST, creating new business systems...etc.
My big problem is with the exchange profile. Yes, it's easy to change all the SIDs and hostnames using the search tool for all the parameters in the exchange profile, but the one I COULD NOT CHANGE was the "ABAP Connection". In there right after the copy was the hostname of the prod system, the client, and the user PILDUSER. I attempted to put the hostname of my target (PIT) system, but I would get the error:
com.sap.rprof.dbprofiles.DBException: RFC call returned an error code: 399
I'm certain the user is NOT locked and the password is correct for PILDUSER. It'll give me a different error if I put the wrong password in, so I know it's hitting my system.
Worse yet, If I left the hostname in there that was set to "prod", then when I changed all the other values in the "parameters" section of the XI profile, then it actually changed my PROD system!!
If I keep the ABAP connection to PIT, then the entire exchange profile disappears for PIT.
I see these errors in the default trace and application log:
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND:
No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",
Name="PIT.SystemHome.<traininghostname>"
Caused by: com.sap.lcr.api.cimclient.LcrException: CIM_ERR_NOT_FOUND: No such instance: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="PIT.SystemHome.<traininghostname>"
at com.sap.lcr.api.cimclient.SimpleResponseAnalyser.raiseExceptionOnError(SimpleResponseAnalyser.java:120)
#2.#2011 11 03 13:49:47:008#0-500#Error#com.sap.aii.af.service.sld.SLDRegistrationJob#
#BC-XI-CON-AFW#com.sap.aii.af.lib#7E3832DEA80F002B00000000008700C6#4804850000001902##com.sap.aii.af.service.sld.SLDRegistrationJob.SLDRegistrationJob.invoke()#J2EE_GUEST#0##0AFD01D4064C11E1CB5E7E3832DEA80F#0afd01d4064c11e1cb5e7e3832dea80f#0afd01d4064c11e1cb5e7e3832dea80f#0#Application [24]#Plain##
SLD Registration Job: No access to SLD. Waiting for next retry. Error: com.sap.aii.af.lib.sld.SLDException: Failed to initialize ExchangeProfile properties. Reason: Unable to read configuration data (ExchangeProfile/aii.properties)#
#2.#2011 11 03 14:51:18:096#0-500#Error#com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract#
#BC-ESI-WS-JAV#tcesiespsrv#7E3832DEA80F001100000000009A004C#4804850000001385##com.sap.esi.esp.service.server.ESPServiceInterfaceAbstract####109F6812065511E1BF9C7E3832DEA80F#109f6812065511e1bf9c7e3832dea80f#109f6812065511e1bf9c7e3832dea80f#0#Service Runner [tcesiespsrv]#Plain##
+There is problem reading the hostname from the ClusterManager. This could lead to improper wsdl links.#
SLDCHECK shows this:
Function call returned exception code 3
Access to the XI Profile is currently disrupted.
I can't be the first person to run into this.
SO strange that I can actually plug in either my dev/QA or PROD hostname in the "ABAP connection" box and it WILL ACCEPT IT...but then, it registered my training system as a "non central adapter engine". I don't want that.
Any ideas?
Another issue is that the SLD PI information from the PIT system is missing the "Integration Directory". It has the other 5 entries...Adapter Engine, Domain, Integration Repository, Integration Server, RWB.
Thanks for reading this,
NICK

Here is the error I get when I try to change the "abap connection" to the correct hostname:
RFC call returned an error code: 399
Stack Trace class com.sap.rprof.dbprofiles.DBException: <pre>at com.sap.rprof.dbprofiles.DBProfiles.checkReturn(DBProfiles.java:184) at com.sap.rprof.dbprofiles.DBProfiles.getProfile(DBProfiles.java:105) at com.sap.rprof.dbprofiles.RemoteProfile.readRemoteProfileFromMedia(RemoteProfile.java:1378) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfileFromFactory(RemoteProfile.java:204) at com.sap.rprof.dbprofiles.RemoteProfile.getRemoteProfile(RemoteProfile.java:154) at com.sap.rprof.dbprofiles.ExchangeProfile.getExchangeProfile(ExchangeProfile.java:46) at com.sap.rprof.remoteProfile.webui.ProfileWebTree.<init>(ProfileWebTree.java:24) at com.sap.rprof.remoteProfile.webui.Edit.getWebTree(Edit.java:322) at JEE_jsp_treeexprof_4804850_1319481176000_1319565151782._jspService(JEE_jsp_treeexprof_4804850_1319481176000_1319565151782.java:59) at com.sap.engine.services.servlets_jsp.lib.jspruntime.JspBase.service(JspBase.java:102) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:436) at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:240) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:140) at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:37) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:493) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:399) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:388) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:84) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:244) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:78) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60) at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:43) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42) at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:428) at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:247) at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:45) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:122) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:101) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:327) </pre>

Import ABAP error in ECC6 system copy targert

Hi Experts,
 I am istalling SAP Ecc 6 in System copy targrt, ABAP import fail in 2/87. I got the error Loading of 'SAPDFACT' import package: ERRORImport Monitor jobs.
My OS Windows 2003 64 bit and Oracle 10.2. Please find the log files belo. Please help me to solve this issue
:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -ctf I H:\MVGK IDESBackup-march2010\ABAP\DATA\SAPDFACT.STR C:\Program Files\sapinst_instdir\ERP\LM\COPY\ORA\SYSTEM\CENTRAL\AS\DDLORA.TPL SAPDFACT.TSK ORA -l SAPDFACT.log
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job completed
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325173244
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "AT220100325020343 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "KENKI "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "KENKI"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 15 Step 7)"
(DB) INFO: /BI0/E0RSTT_C01 created #20100325173245
(IMP) INFO: import of /BI0/E0RSTT_C01 completed (0 rows) #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~0 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~01 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~02 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~04 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~05 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~06 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~07 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~08 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~09 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~10 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~11 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~12 created #20100325173245
(DB) INFO: /BI0/E0RSTT_C01~13 created #20100325173245
DbSl Trace: Error 1408 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-1408 occurred when executing SQL stmt (parse error offset=57)
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C01~P" ON "/BI0/E0RSTT_C01" ( "KEY_0RSTT_C01P" , "KEY_0RSTT_C01T" , "KEY_0RSTT_C01U" , "KEY_0RSTT_C011" , "KEY_0RSTT_C012" , "KEY_0RSTT_C013" , "KEY_0RSTT_C014" , "KEY_0RSTT_C015" , "KEY_0RSTT_C016" , "KEY_0RSTT_C017" , "KEY_0RSTT_C018" , "KEY_0RSTT_C019" , "KEY_0RSTT_C01A" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325173245
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325174158
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname = "AT220100325020343 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "KENKI "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "KENKI"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 15 Step 7)"
(DB) ERROR: DDL statement failed
(DROP INDEX "/BI0/E0RSTT_C01~P")
DbSlExecute: rc = 103
(SQL error 1418)
error message returned by DbSl:
ORA-01418: specified index does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
DbSl Trace: Error 1408 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-1408 occurred when executing SQL stmt (parse error offset=57)
(DB) ERROR: DDL statement failed
(CREATE INDEX "/BI0/E0RSTT_C01~P" ON "/BI0/E0RSTT_C01" ( "KEY_0RSTT_C01P" , "KEY_0RSTT_C01T" , "KEY_0RSTT_C01U" , "KEY_0RSTT_C011" , "KEY_0RSTT_C012" , "KEY_0RSTT_C013" , "KEY_0RSTT_C014" , "KEY_0RSTT_C015" , "KEY_0RSTT_C016" , "KEY_0RSTT_C017" , "KEY_0RSTT_C018" , "KEY_0RSTT_C019" , "KEY_0RSTT_C01A" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 65536 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) NOLOGGING COMPUTE STATISTICS )
DbSlExecute: rc = 99
(SQL error 1408)
error message returned by DbSl:
ORA-01408: such column list already indexed
(DB) INFO: disconnected from DB
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325174158
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325180802
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325180808
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325182246
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325182251
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100325183259
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100325183304
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100326100904
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -stop_on_error
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
DbSl Trace: OCI-call 'OCIServerAttach' failed with rc=12541
DbSl Trace: CONNECT failed with sql error '12541'
(DB) ERROR: DbSlErrorMsg rc = 99
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\AT2\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100326100910
Thanks in Advance
Jose H

Hi,
You can check the defined enviornment variable using command prompt and System properties.
Open Command Prompt and give "set" command. It will show you active environment variable.
You can also set missing environment variables in system properties.
Start -->Control Panel --> System
On Advanced Tab --> Environment Variables.
After logging to the database if it shows message "Connected to idle instance", that means your database is not started.
Please start the database using below SQL command.
Open Command Prompt
C:\Sqlplus / as sysdba
SQL>startup
Once it says "Database opened", retry SAP installation.
You can also check the database status in SQL prompt using below command:
SQL> select instance_name,status from v$instance;
It must show output like:
INSTANCE_NAME STATUS
<SID> OPEN
Regards.
Rajesh Narkhede

SSO to R3 not working after system copy

Hi Experts,
Recently our QA R3 client XXX was deleted and the whole system was rebuild using system copy of client ZZZ of R3 production. Now we had to reconfigure the SSO between portal and QA R3 with the new client.
But it is not working. It was found that the QA R3's own self signed certificate shows CN=ERP (same as R3 Prod) and not ERU as it should have been. We changed the CN value to ERP,in Visual Admin (Services ->key storage , Ticket ). Still the result is same.
How to re-generate the self signed certificate in R3 with CN=ERU ?
or a workaround for this problem.
Regards
Jimmy

HI Jayendra
Recreate the saplogonticketkeypair following the procedure outlined here
http://help.sap.com/saphelp_nw70/helpdata/en/75/c80b424c6cc717e10000000a155106/content.htm
Then you can export the SAPLogonticketkeypair-cert (public key certificate) of the Java AS and import it into the target ABAP system
Important: the following two steps must be done in the ABAP client that will receive the logon tickets i.e the ABAP client that the component/application on the Java AS is configured to connect to e.g the client specified in the portal iview properties or the client specified in a Web Dynpro JCo Destination
(1) Import the public-key certificate of the Java AS into the ABAP systems certificate list using transaction STRUSTSSO2
(2) Add the certificate to access control list
When adding the certificate to the ACL the SID should be set to the SID of the ticket issuing Java AS and the client should be set to the client that the Java AS is writing to the logon tickets i.e the value of login.ticket_client in the Java AS
Remember, in an Add-In installation, where the system IDs are the same, you must change the default client for the J2EE Engine (000) to a client that does not exist on the SAP Web AS ABAP system e.g change login.ticket_client to 999
See: http://help.sap.com/saphelp_nw70/helpdata/en/cb/ac3d41a5a9ef23e10000000a155106/content.htm
The reason for this change is that the system ID and client combination must be unique when tickets are to be accepted by an SAP Web AS ABAP system
By the way it is better to start a new thread with your question rather than bumping a thread that was already set to 'answered'

"Table VSEOPARENT is not in the database" after SolMan system copy to x64

Hi SDNners,
We've just completed a system copy of our SolMan 3.1 system onto a new
(Xeon x64 based) server. This system copy is part of the process of
moving SolMan 3.1 from an old server onto 64bit hardware and then
upgrading it to SolMan v4 and Oracle 10G.
Although the system appears to start properly in the MMC, we are unable
to log into the system through SAPGUI - we get a SYNTAX_ERROR window
instead of a logon screen.
I've checked the SysLog from within the MMC and noticed a number of
errors stating:
Database: Table VSEOPARENT is not in the database
Database: Table VSEOIFIMPL is not in the database
Database: Table VSEOIFCOMP is not in the database
I tried running SQL command 'select * from "SAPSOL"."VSEOPARENT"; and
it confirmed that the table didn't exist. I then ran the same command
on the source SolMan system and it showed that VSEOPARENT DID exist. I
don't understand how these VSEO* tables could have gone missing between
the source and target systems.
I've searched OSS for VSEO* and cannot find anything. Please help!
Thanks,
Arwel.

We have 640 kernel, ECC 5.0 and BASIS patch 23.
For me the problem was with SAPVIEW table wasnt imported from source to target becuase SAPVIEW.STR file was 0 byte. STR files gets created in export preparation phase.
It did happen because on source side master DVD, there was no option for export preparation. I had only option for tablesplit and export db.
I did use ECC 5.0 SR2 Master DVD which had option for export preparation phase and that created SAPVIEW.STR file.
Using migration monitor I did re-export and re-import and this time all views are imported in target.
Regards,
Mamadi.

System copy: import abap phase

Hi Guys,
While performing system copy I am facing issue in import abap phase, pasting the log for your reference:
SAPSSEXC_26.log
D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#13 $ SAP
D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 17 2007 00:40:17
D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC_26.cmd -dbcodepage 4103 -l SAPSSEXC_26.log -loadprocedure fast
(DB) INFO: connected to DB
(GSI) INFO: dbname = "<SID>SAPDEMO\<SID> "
(GSI) INFO: vname = "MSSQL "
(GSI) INFO: hostname = "SAPDEMO\<SID> "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "SAPDEMO"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "8x AMD64 Level 6 (Mod 30 Step 5)"
(DB) ERROR: DDL statement failed
(DROP INDEX [TTREEI].[TTREEI~NOD])
DbSlExecute: rc = 103
(SQL error 3701)
error message returned by DbSl:
Cannot drop the index 'TTREEI.TTREEI~NOD', because it does not exist or you do not have permission.
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE INDEX [TTREEI~NOD] ON [TTREEI] ( [NODE_ID] ) )
DbSlExecute: rc = 99
(SQL error 3621)
error message returned by DbSl:
Warning: Fatal error 824 occurred at Sep 24 2010 12:45AM. Note the error and time, and contact your system administrator.
The statement has been terminated.
(DB) INFO: disconnected from DB
D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
D:\usr\sap\<SID>\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100924004524
ECC 6.0 SR2
MSSQL2005
Please suggest asap.
Regards,
Mridul Gupta

Hi,
After moving further I got stuck in Install Java Engine phase
Extracting packed root JAR
ERROR: Error during installation of SDM on D:\usr\sap\W6V\DVEBMGS15\SDM\program
ERROR: Cannot extract D:\usr\sap\W6V\DVEBMGS15\SDM_tmp\pack\packedRoot.jar to D:\usr\sap\W6V\DVEBMGS15\SDM\root: Cannot extract JAR:
Error: Could not extract file origin/com.adobe/PDFManipulation/Adobe Systems/0/705.20060314112518.106587/adobe-PDFManipulation.sda from archive D:/usr/sap/W6V/DVEBMGS15/SDM_tmp/pack/packedRoot.jar
Additional error message is:
invalid entry CRC (expected 0xc596dc9d but got 0xcb9ef375)
Processing error. Return code: 4
Please suggest.
Regards,
Mridul Gupta

"System copy stops in "check DDIC password" step

Hi,
We performed a combined upgrade/unicode conversion to ECC5.0 Non-Unicode to ECC 6.0 Unicode ( Windows 2003 Server, Oracle 10gR2 ).
But at the end of import ( using R3load tool ), the import stops at "check DDIC password" step with error message :
"Test logon to SAP System D12 failed.
SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
We checked the system, it's online , and the user DDIC exists. But we could not logon using sapgui. it gives message :
"Programm SAPMS380 not found"
If any one could help
thank you
Pascal
file sapinst_dev.log :
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:13:39.460 [iaxxclogintimeout.cpp:92]
 CLoginTimeout::run()
Login in progress
TRACE 2008-10-06 12:13:39.460
Connection request to guiengine backend by host 10.90.150.140
TRACE 2008-10-06 12:13:39.460 [iaxxgenimp.cpp:471]
 CGuiEngineImp::showDialog()
showing dlg diProductChoice
TRACE 2008-10-06 12:13:39.475 [iaxxgenimp.cpp:490]
 CGuiEngineImp::showDialog()
<dialog sid="diProductChoice">
<title>Welcome to SAP Installation Master</title>
<dialog/>
TRACE 2008-10-06 12:13:39.522
Protocol version is 3.1
TRACE 2008-10-06 12:13:39.522
Send connect information
TRACE 2008-10-06 12:13:39.522
client logged on
TRACE 2008-10-06 12:13:39.803 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:03.131 [iaxxdlghnd.cpp:96]
 CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE 2008-10-06 12:14:03.131 [iaxxcdialogdoc.cpp:212]
 CDialogDocument::submit()
<dialog sid="diProductChoice">
<dialog/>
INFO 2008-10-06 12:14:03.147 [synxcpath.cpp:776]
 CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
INFO 2008-10-06 12:14:03.147 [synxcfile.cpp:177]
 CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\x.
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:471]
 CGuiEngineImp::showDialog()
showing dlg diRestartOrCancel
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:490]
 CGuiEngineImp::showDialog()
<dialog sid="diRestartOrCancel">
Dialog does not contain standard input handler, so the backend is not able to generate a log entry
<dialog/>
TRACE 2008-10-06 12:14:03.209 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:14:05.522
current working directory is C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/
INFO 2008-10-06 12:14:05.522 [synxcpath.cpp:776]
 CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\x.
INFO 2008-10-06 12:14:05.522 [synxcfile.cpp:177]
 CSyFileImpl::remove()
Removing file C:\Program Files\sapinst_instdir\x.
TRACE 2008-10-06 12:14:06.553
Running with toplevel file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//toplevel.xml
TRACE 2008-10-06 12:14:06.741
Using custom value info for property SAPINST_MESSAGE_CONSOLE_THRESHOLD.
TRACE 2008-10-06 12:14:06.741
Running with dialog file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//dialog.xml
TRACE 2008-10-06 12:14:06.881
Running with keydb file C:\Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP//keydb.xml
TRACE 2008-10-06 12:14:07.194 [synxcfile.cpp:339]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml
INFO 2008-10-06 12:14:07.209 [synxcfile.cpp:493]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.18.xml'.
TRACE 2008-10-06 12:14:08.709 [synxcfile.cpp:339]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml
INFO 2008-10-06 12:14:08.725 [synxcfile.cpp:493]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.19.xml'.
TRACE 2008-10-06 12:14:17.928
SAPinst was started using commandline: G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214\sapinst.exe
TRACE 2008-10-06 12:14:17.928
SAPinst properties are :
GUISERVER_DIALOG_PORT=21212
GUISERVER_HTTP_PORT=4239
SAPINST_CONTROL_URL=control.xml
SAPINST_DIALOG_PORT=21200
SAPINST_DIALOG_URL=dialog.xml
SAPINST_EXE=SAPINST_EXE
SAPINST_JSLIB_TRACE=NW,NWUsers,OraCom,NWCTC,SMDAgent
SAPINST_KEYDB_URL=keydb.xml
SAPINST_MESSAGE_CONSOLE_THRESHOLD=info
SAPINST_MESSAGE_URL=.
SAPINST_PACKAGES_URL=packages.xml
SAPINST_RESOURCE_URL=resourcepool.xml
SAPINST_SAVE_INPUT=true
SAPINST_SCAN_DEVICES=false
SAPINST_SKIP_DIALOGS=false
SAPINST_TOPLEVEL_URL=toplevel.xml
SAPINST_USE_ADVANCED_JS_HANDLING=true
TRACE 2008-10-06 12:14:17.959 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaejs701.dll
TRACE 2008-10-06 12:14:18.69 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iacdlib701.dll
TRACE 2008-10-06 12:14:18.162 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iaccdlib.dll
WARNING 2008-10-06 12:14:18.162 [synxcpath.cpp:912]
 CSyPath::getOSNodeType(bool )
Unable to get information about path
LABEL.ASC\ using GetVolumeInformation. Operating system error message: The filename, directory name, or volume label syntax is incorrect.
TRACE 2008-10-06 12:14:18.225 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iapasswdman701.dll
TRACE 2008-10-06 12:14:18.225
This is SAPinst, version 701, make variant 700_REL, build 967243
compiled on Mar 7 2008, 01:01:19
TRACE 2008-10-06 12:14:18.350 [synxcaccmg.cpp:640]
 CSyADsPath::fromString(ONEPNET\d12adm)
Account ONEPNET/d12adm has ADS path 'WinNT://ONEPNET/d12adm'
TRACE 2008-10-06 12:14:18.428 [synxcaccnt.cpp:967]
 iastring CSyAccountImpl::getSID(IUnknown* pUnk) const
d12adm has SID S-1-5-21-770850386-355409785-620655208-35637
TRACE 2008-10-06 12:14:20.678 [synxcuser.cpp:1076]
 CSyUserImpl::isExistingOnOS()
existence check for user d12adm returned true.
TRACE 2008-10-06 12:14:20.678 [syxxccache.cpp:208]
 CSyAccountCache::getUserImpl(name="ONEPNET\d12adm", sid="", create=false, ISyProgressObserver* )
inserted account (d12adm, S-1-5-21-770850386-355409785-620655208-35637, USER) into the accountcache.
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:175]
 syslib::logSystemState()
Process environment
===================
Environment Variables
=====================
 = C:=C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
 = G:=G:\usr\sap\D12\tmp\1\sapinst_exe.1576.1223295214
 = J:=J:\Install_ECC6_64_uni\BS_2005_SR3_SAP_Installation_Master\IM_WINDOWS_X86_64
ALLUSERSPROFILE = C:\Documents and Settings\All Users
APPDATA = C:\Documents and Settings\d12adm\Application Data
CLIENTNAME = TAL-MOBILE
ClusterLog = C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles = C:\Program Files\Common Files
CommonProgramFiles(x86) = C:\Program Files (x86)\Common Files
COMPUTERNAME = SAPRH-PROD1
ComSpec = C:\WINDOWS\system32\cmd.exe
DBMS_TYPE = ora
dbs_ora_schema = SAPSR3
dbs_ora_tnsname = D12
FP_NO_HOST_CHECK = NO
HOMEDRIVE = C:
HOMEPATH = \Documents and Settings\d12adm
JAVA_HOME = C:\Program Files (x86)\Java\j2re1.4.2_09
LOGONSERVER =
CDBOUREGREG
NLS_LANG = AMERICAN_AMERICA.UTF8
NUMBER_OF_PROCESSORS = 8
ORACLE_HOME = D:\oracle\D12\102
ORACLE_SID = D12
OS = Windows_NT
Path = D:\oracle\D12\102\bin;C:\Program Files (x86)\Java\j2re1.4.2_09\bin;C:\Program Files (x86)\EMC\PowerPath\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;G:\usr\sap\D12\SYS\exe\uc\NTAMD64
PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PERL5LIB = D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64-multi-thread;D:\oracle\D12\102\perl\5.8.3\lib;D:\oracle\D12\102\perl\5.8.3\lib\MSWin32-X64;D:\oracle\D12\102\perl\site\5.8.3;D:\oracle\D12\102\perl\site\5.8.3\lib;D:\oracle\D12\102\sysman\admin\scripts;
PROCESSOR_ARCHITECTURE = AMD64
PROCESSOR_IDENTIFIER = EM64T Family 6 Model 15 Stepping 11, GenuineIntel
PROCESSOR_LEVEL = 6
PROCESSOR_REVISION = 0f0b
ProgramFiles = C:\Program Files
ProgramFiles(x86) = C:\Program Files (x86)
SAPDATA_HOME = I:\oracle\D12
SAPEXE = G:\usr\sap\D12\SYS\exe\uc\NTAMD64
SAPINST_EXEDIR_CD = J:/Install_ECC6_64_uni/BS_2005_SR3_SAP_Installation_Master/IM_WINDOWS_X86_64
SAPLOCALHOST = saprh-prod1
SAPSYSTEMNAME = D12
SESSIONNAME = RDP-Tcp#1
SystemDrive = C:
SystemRoot = C:\WINDOWS
TEMP = G:\usr\sap\D12\tmp\1
TMP = G:\usr\sap\D12\tmp\1
TNS_ADMIN = G:\usr\sap\D12\SYS\profile\oracle
USERDNSDOMAIN = ONEPNET.INTRA
USERDOMAIN = ONEPNET
USERNAME = d12adm
USERPROFILE = C:\Documents and Settings\d12adm
windir = C:\WINDOWS
User: ONEPNET\d12adm, Id: S-1-5-21-770850386-355409785-620655208-35637
Working directory: C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP
TRACE 2008-10-06 12:14:20.678 [syxxsyshlp.cpp:185]
 syslib::logSystemState()
System information
==================
OS version, host name: Microsoft Windows [Version 5.2.3790 Service Pack 2] SAPRH-PROD1
RAM size (MB): 12287
Swap size (MB): 21708.6
TRACE 2008-10-06 12:14:20.709
Running with control file control.xml version=701 changelist=33819 product-id=d0e28628
TRACE 2008-10-06 12:14:20.709
Selected Service NW_ABAP_OneHost|ind|ind|ind|ind
TRACE 2008-10-06 12:14:20.709 [synxcfile.cpp:339]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml
INFO 2008-10-06 12:14:20.709 [synxcfile.cpp:493]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/inifile.7.xml'.
INFO 2008-10-06 12:14:20.959 [sixxcstepexecute.cpp:387]
Execute step
Component W2K_ServicePack_Check|ind|ind|ind|ind
Preprocess of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
TRACE 2008-10-06 12:14:29.428
Java script statistics: ScriptSize 4788012 CompileTimeInSeconds 8.437
TRACE 2008-10-06 12:14:29.459 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iajsmod.dll
TRACE 2008-10-06 12:14:29.537 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodos.dll
TRACE 2008-10-06 12:14:29.569 [synxccuren.cpp:1115]
 CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:29.584
Call block:W2K_ServicePack_Check_ind_ind_ind_ind
 function:W2K_ServicePack_Check_ind_ind_ind_ind_Preprocess
is validator: false
TRACE 2008-10-06 12:14:29.834
Status of Step |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password is not OK. Re execute only that step and go on in RESTART mode.
TRACE 2008-10-06 12:14:29.991 [synxcfile.cpp:339]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml
INFO 2008-10-06 12:14:29.991 [synxcfile.cpp:493]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/keydb.7.xml'.
TRACE 2008-10-06 12:14:30.131 [synxcfile.cpp:339]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copying file C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml to C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml
INFO 2008-10-06 12:14:30.147 [synxcfile.cpp:493]
 CSyFileImpl::copy(const CSyPath & C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml, ISyNode::CopyMoveMode_t 0x3, ISyProgressObserver*) const
Copied file 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS-ABAP/statistic.20.xml'.
INFO 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:781]
Execute step checkDDIC000Password of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0
TRACE 2008-10-06 12:14:30.256 [sixxcstepexecute.cpp:850]
Execution of preprocess block of |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|NW_DDIC_Password|ind|ind|ind|ind|0|0|checkDDIC000Password returns TRUE.
TRACE 2008-10-06 12:14:30.272 [synxccuren.cpp:1115]
 CSyCurrentProcessEnvironmentImpl::getEffectiveUser(iastring&)
effective user corresponds to real user
TRACE 2008-10-06 12:14:30.272
Call block:NW_DDIC_Password_ind_ind_ind_ind
 function:NW_DDIC_Password_ind_ind_ind_ind_SubComponentContainer_checkDDIC000Password
is validator: false
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstance.byNumber(00, saprh-prod1)
TRACE 2008-10-06 12:14:30.272
2008-10-06 12:14:30.272 NWInstanceInstall.find(
function (instance) {
 return instance.getNumber() == number && instance.getHostName().equals(host);
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstance(D12/DVEBMGS00/saprh-prod1) done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWJavaInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstance() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWDialogInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWCentralInstanceInstall() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall._fromRow() done
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstanceInstall.find() done: 1 instances found
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall.getSystem(D12)
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NWInstall()
TRACE 2008-10-06 12:14:30.287
2008-10-06 12:14:30.287 NW()
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NW() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWInstall.getSystem() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers(D12)
TRACE 2008-10-06 12:14:30.319
t_NW_users.updateRow(, WHERE sid='D12'), updating
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers() done
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.319
2008-10-06 12:14:30.319 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.319 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:14:30.334
2008-10-06 12:14:30.334 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers._readAccountData() done
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWUsers.getAccountData():
TRACE 2008-10-06 12:14:30.350
2008-10-06 12:14:30.350 NWDialogInstance.getRFCUser() done
TRACE 2008-10-06 12:14:30.381 [syxxccuren.cpp:31]
 CSyCurrentProcessEnvironmentImpl::setEnvironmentVariable(const iastring & 'SAPPARAM700', const iastring & '1')
Environment variable SAPPARAM700 set to value '1'.
TRACE 2008-10-06 12:14:30.397 [iaxxctrace.cpp:42]
 CIaIcmAuth::traceInit()
Initialized SAP trace: tf is now set.
INFO 2008-10-06 12:14:30.412 [synxccuren.cpp:65]
 CSyCurrentProcessEnvironmentImpl::removeEnvironmentVariable(iastring)
Removed environment variable SAPPARAM700 from current process environment.
TRACE 2008-10-06 12:14:30.412 [iaxxbsapparam.cpp:68]
 CIaSAPParam::initializeDefaultValues_impl()
Read default profile values from kernel.
TRACE 2008-10-06 12:14:30.412 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodapp.dll
TRACE 2008-10-06 12:14:30.694 [iaxxclib.cpp:188]
 CLib::load()
Opened G:/usr/sap/D12/tmp/1/sapinst_exe.1576.1223295214/iamodrfc.dll
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:30.819 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.053 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.084 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:14:31.116 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:14:31.178 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </body></html>
TRACE 2008-10-06 12:14:31.178 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:33.957 [iaxxdlghnd.cpp:198]
 CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.957
2008-10-06 12:21:33.957 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:33.972
2008-10-06 12:21:33.972 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:33.972 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:34.035 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:34.097 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </body></html>
TRACE 2008-10-06 12:21:34.97 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:21:35.644 [iaxxdlghnd.cpp:198]
 CDialogHandler::doHandleDoc()
ACTION_OK received
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWDialogInstance.getRFCUser(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.getAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.644
2008-10-06 12:21:35.644 NWUsers.haveAccountData() done: true
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData(DDIC.000)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead(DDIC.000, rfc)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._isSystemRead() done: false
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers._readAccountData() done
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword()
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getMasterPassword() done: XXXXX (master password is set)
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWUsers.getAccountData():
TRACE 2008-10-06 12:21:35.660
2008-10-06 12:21:35.660 NWDialogInstance.getRFCUser() done
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.660 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter CLIENT set to value 000.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter USER set to value DDIC.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LCHECK set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter PCS set to value 1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter LANG set to value EN.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value saprh-prod1.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:380]
 CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 00.
INFO 2008-10-06 12:21:35.722 [iaxxrfcimp.cpp:520]
 CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
WARNING[E] 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:433]
 CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:434]
 CAbRfcImpl::openRfcConn
Failed to open RFC connection
TRACE 2008-10-06 12:21:36.769 [iaxxrfcimp.cpp:436]
 CAbRfcImpl::openRfcConn
Program SAPMSSY1 n
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> Test logon to SAP System D12 failed. SOLUTION: Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct. </body></html>
TRACE 2008-10-06 12:21:36.769 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE 2008-10-06 12:44:40.278 [iaxxcnclhd.cpp:84]
 CCancelHandler::doHandleDoc(IDialogDocument * pDoc )
ACTION_CANCEL requested
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> You are about to cancel the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System installation. <li> Choose one of the following: </li> <ul> <li> 'Continue' - to continue the installation. </li> <li> 'Stop' - to stop the installation and exit SAPinst. You can continue the installation later from this point Note: If you stop the installation after the installation activites have been started, do not use the SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP > Central System, as it is not ready to be used. </li> </ul> </body></html>
TRACE 2008-10-06 12:44:40.278 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2008-10-06 12:44:41.840 [synxcpath.cpp:776]
 CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\.lastInstallationLocation.
INFO 2008-10-06 12:44:42.074 [synxcpath.cpp:776]
 CSyPath::createFile()
Creating file C:\Program Files\sapinst_instdir\NW04S\LM\COPY\ORA\SYSTEM\CENTRAL\AS-ABAP\__instana_tmp.xml.

Hi,
The possible problem for the DDIC user could be, once the data imported the password of the DDIC got reset to older password as in ECC5, try login the system with sap* user and reset the password of DDIC, then login as DDIC user and set the password permannetly and retry the activity.
If sap* also shows with same problem try changing the password of sap* from DB level by executing the query(you can find solutions for this in SDN forum threads, check them). or try deleting the user sap* and recreate where user gets creted wiuth default pasword as "PASS" and logon and reset the user DDIC.
Regards.

SID in System Copy.

Similar Messages

Maybe you are looking for