SID problem in Master data

Hi All,
I have deleted Master Data records from the table and SID also deleted from SID table.But now my report giveing error message SID are missing from Master data object.
How i can resolve this issue..
another Issue : I have deleted the 4 records form Master table and SID table but that records are appearing in report ?
Regards
srinivas

Hi,
Issue 1. Run th program RSDMD_CHECKPRG_ALL in SE38. Give the master data name and execute.
Issue 2. After deleting the records try to run the attribute change run for that object once and try. If they are still appearing in the reports means they are already there in the aggregates. If you dont want those records not to appear in the report, you have to delete that request and reload the data and activate the aggregates.
Regards,
Jack

Similar Messages

Problem updating master data

Hi all, im having a problem updating master data for an infoobject.
Im not able to upload the data from the data source and im not able either to update it manually.
Im getting this error Field symbol has not yet been assigned
can anybody hekp me?

Ask your Basis team to implement this note in BI system..
Summary
Symptom
GETWA_NOT_ASSIGNED (a field symbol is not yet assigned) occurs when new master data providers are implemented after Note 1089231.
Reason and Prerequisites
This problem is caused by a program error.
This problem only occurs when display attributes are requested and no data is returned.

Problem with Master Data Load

Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022     Re-schedule the master data load process to avoid such situations in future.
u2022     Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
Luis

Dear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2.     Follow instructions from OSS 632931 (tcode RSRV)
3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis

Problem with master data lookup in transformations

Hi,
We're experiencing a strange problem in the transformations for an Error Reporting scenario.
We've the SAP standard customer (0CUSTOMER) in DSO 2 which derives it's value from the navigational attribute of YCUSTNR (0CUSTOMER is the navigational attribute of YCUSTNR) in DSO1. But the problem here is that even when there is no entry for YCUSTNR, the 0CUSTOMER in DSO 2 returns a value.
Referential Integrity check is not employed for this scenario. Is it because of this reason that lack of master data is returning some value held in memory. I'm not sure whether it's an issue with the cache. Is there any work around for solving this problem other than the standard master data look up?
Any help in this issue would be appreciated and rewarded.
Thanks & Regards
Hari

Note 1031553 - Reading master data returns value that does not exist
will solve this problem.
Regards,
József.

Problem in master data loading in BI 7.0

Hi Experts,
I m loading master data in BI 7.0 server.
It is getting failed due to invalid record.
But when i load the same data in 3.5; it is successful.
Can anybody tell me what may be the problem..
Thanks in advance..
Regards,
Ashwin

Hi,
In BI 7.0 we first load data to PSA through Infopacage.Once data comes in PSA table we do transformation between the PSA table which is tied to the datasource and the data target.
Then we load data to the target through DTP.
May be there is some problem in the transformation.Check your mapping in the transformation.
Kindly update me regarding this.
Regards,
Debjani..

Problems in master data upload

Hi all,
What r the problem we will face in master data upload?
Plz explain this as very urgent.
Thanks in advance
Venkat

Hi Venkat,
My suugestion is Before Posting a new Post Please close u r previous threads if u r satisfied...
Then everone will be interested to answer to u r queries..
Regards,
Sridhar

Problem load master data

Hi experts
I am trying to load master data 0MATERIAL ATTR, there is no error when load into PSA but when I did load into IO it shows error as below:
Too many error records - update terminated
Example:
Record 1 :0MATERIAL : Data record 1 ('000000020000000001 '): Version '000000020000000001 ' is not valiad RSDMD 194
Please kindly advice if you have any idea how to fix the problem.
Thanks in advance
Angel

Hi Angel,
There might be a problem in data from source system. Check the tech spec of the info object like type length etc.in BW. then check with the data in PSA.
Hope this will help.
Assign Points if helpful
Regards,
Ramesh

How do I load SIDs into a Master Data Object?

Hi again,
I created an InfoObject WCUSTOMER with 0CUSTOMER as template (NOT reference). That means the structure of these two objects should be identical. Now I want to load WCUSTOMER also with the same data.
I loaded WCUSTOMER with attributes and texts using the InfoSources 0CUSTOMER_ATTR and 0CUSTOMER_TEXT. But of course, SIDs are missing. Otherwise I won't see any data because WCUSTOMER does not know which attribute tables to refer to. Right?
Now how do I get these SIDs into WCUSTOMER? I can see that apparently 0CUSTOMER is using a DataSource called 0CUSTOMER_LKLS_HIER for that purpose. But (1) the BI does not offer me a chance to use this DataSource as well for WCUSTOMER and (2) it wouldnt even make sense because 0CUSTOMER and WCUSTOMER would then refer to the same set of attribute tables which was not the purpose of creating a separate InfoObject for Customers. Right?
So how can I manage to get some SIDs into my WCUSTOMER object in order to use the attribute and text tables I already filled with data?
I hope someone can give me a hint. I'll assign points of course...
Stefan

Hi Jürgen,
How did you look at the data ? (Right click on
Infoobject to "maintain master data")
Yes, that is what I did. I also went into the InfoObject under "Masetr Data/Texts" and double clicked the three tables listed there.
Did you activate the maser data ? (Right click on
Infoobject to start from context menu)
Just activated it, but still no other result.
Did you load any "Text" for WCUSTOMER ? The text is
what is shown in a bex query, not any attribute (at
least not initially).
I did load the texts. I haven't tried to see them in the Bex Explorer.
Transaction SE16 show the content of a table. I don't
know the table where you will find customer data in
R3.In BW you can look at the data of your WCUSTOMER by looking at
table /BIC/PWCUSTOMER (at least if your name space is
configured similar to ours).
Yeah I checked the table. But also no data visable.
I also checked the list of requests. All they tell me is InfoSource and Datasource, etc. Nothing I wouldn't have expected.
Two things I will have to try:
1. really check if there is data in the R3
2. export 0Customer data and load it as a flatfile.
Cheers,
Stefan

Problem in master data

Hi All,
We have stock info cube in which we are updating Distribution Channel using update rules 0CUST_SALES.There was a problem in Update rule for distribution channel.
Till now we were loading master data weekly. So, my 0CUST_SALES contains lots of records without Distribution channel,Division and Sales org.
Just because of these when i check my stock at Distribution channel level it shows me wrong figure.
Is there any way of removing initial values for Distribution channel,Divsion and sales org from 0CUST_SALES ??
Regards,
Viren.

Hi,
Now are loading master data daily.
Blank attributes are navigational as well as in the dimension of the cube also.
But for single Customer there three to four records.How to remove records with attributes having initial values ? Because Customer can not have Division,Distribution Channel,Sales Org as blank field.
Regards,
Viren.

Adjusting the SID table for master data infoobject

Hai
Im trying to activate one master data infoobject. But it says the error like below
<b>The SID Table /BI0/SBBP_DELREF must be converted incompatibly with an activation of characteristic 0BBP_DELREF (changes to the key in the table). Table /BI0/SBBP_DELREF contains data. Parts of this data were lost in the conversion</b>.
or
<b>Undo the changes that led to the incompatible conversion (the changes in the key) or delete all data from table /BI0/SBBP_DELREF.</b>
So how can i adjust the SID table for this .
pls tell me
kumar

Hi,
you'll have to delete ALL the master data for this IObj. Therfore you'll have to
delete all data in ALL the IObjs using 0BBP_DELREF (ODS, CUbes and characteristics).
Then activate your IObj. You will go through some step which I explained in the
following thread
Re: Urgent...Company Code lenght has been changed
Extract:
1. Delete 0COMP_CODE master data.
- get objects list using 0COMP_CODE with loaded data: I suggest to delete
master data via AWB (right click the characteristic). If it can't be deleted because
it is used display the deletion log (via AWB or tx SLG1 / RSDMD, MD_DEL).
- delete loaded data for the list above.
This should not be too much since you are in DEV.
2. change 0COMP_CODE length
- change the length to 4;
*- Activate your IObj. You'll get a popup log, validate. Activate despite warning and
errors. You will get An error message, validate.
You should get an horizontal pane with the activation log. Read it for your personal culture but if you don't have time then don't...
- Next the system will prompt to convert the tables: answer YES. The system will ask to schedule the table conv. in the background, go4it.
- next is the SE14 screen for the P table: Hit Activate and adjust (Direct
execution, or in the back as you wish). Answer yes to the mass processing
question and yes (again) for request adjust online. Your table should be converted successfully.
- go back twice from this screen (leaving SE14 tx and return to RSD1). reread the update log if you wish.
- repeat from the *- above... it will perform the very same for all other P tables of IObj using 0COMP_CODE and the 0COMP_CODE S table.
Your IObj is reactivated again. So should your ODS/DSO objects (check activate for example). Cube didn't need to convert tables since the MDID is note posted in any table of a cube.
Please note that once your IObj is in revised version you can perform the same via the menu extras / database table / convert all (see my previous post).
Now you have to evaluate the task. Of course that is a work to fix the mistake.
Depending on when it has be changed it may be worth to restore your DEV sys with a backup (loose work performed from the backup until now).
hope this helps... otherwise, revert.
Olivier.

DTP problem on master data loading

Dear Experts
       When we loading 0Employee master data daily, sometime PSA data can not reflect to master table
     For example, data in PSA as following
10001    01/01/2008     01/31/2008    C1
10001    02/01/2008     08/31/2008    C1
10001    09/01/2008     12/31/9999    C2
     After DTP request success running, the data as following
10001    01/01/2008     01/31/2008    C1
10001    02/01/2008     08/31/2008    C1
10001    09/01/2008     12/31/9999    C1
    the C2 in PSA can not update to master table, this problem happened time to time, but it hardly find it until users' complain.
    When I manually deleted DTP request from Master attribute list and re-load from PSA to master table, the problem can be fixed.
    By the way, I have already set DTP Semantic Groups as Employee ID.
     Anyone can advice it, thanks in advance.
Regards
Jie

jie miao,
Previous master data already available in BW. every day load you need to load only changes. So last record is enough.
Eg:
Initial load on 01-01-2008
10001 01/01/2008 12/31/9999 C1
--> Data loaded on 2nd Jan and above data available in bw.
on 03-11-2008 you will get following records
10001 01/01/2008 11/02/2008 C1
10001 09/01/2008 12/31/9999 C2
Load these records on 03 Nov, so system updates accordingly.
Hope it Helps
Srini

Problem deleting Master Data from an InfoObject

Hello Everyone,
We have 0MATERIAL infoobject. There was no Master data in the infoobject. Then, i manually entered the data into the InfoObject. After a day, i tried to delete the Master data to load it from R/3. When i tried to delete the Master data from the InfoObject, it shows errors and does not allow me to delete the data. Say, i entered 2 into material column of a record, the error appears like 'Master Data 0000002' (SID 25) is being used in /BI0/DOSH21' and cannot be deleted'. could someone please help me with this. This is a bit urgent. Let me know if you need more information.
Thanks.

Hi Sachin:
Your only hope is if R/3 has the Correct Master Data, it will overwrite your Master Data. But remember for this, the KEYS have to be same because the KEYS can never be deleted in your case.
E.g., MATERIAL, LOC (is an attribute)
You inserted:
000000002, TEXAS
If, in R/3 there is infact a material with key 000000002, FLORIDA. THis will overwrite your Record.
If R/3 doesn't have 000000002, there is not much you can do now.
Ram Chamarty

Problem in Master Data and Master Data Lines

Hi All
I'm facing a big problem...I have a UDO with object type as Master.....As master table and master data line table has code field in common the value for this column should be same....but the problem arises here...it happenes that when i enter the data Code field of master data table has different value from code field of master data lines...
Any one can please help........
Thanks

Hi Pati,
After posting the message did you get a delivery confirmation reply? If not, you need to open a new message saying you have yet to get a answer for your previous message (and state the previous message number).
Then sill you get no answer, you need to get in contact with your SAP Business Partner (if you're a customer) or your Channel Partner (if your a SAP Business Partner).
Regards,
Vítor Vieira

Authorization problem regarding master data

Hello,
we have got a role with very restricted authorizations.
A user with this role can't start the BEx tools for example but it should be possible for him to see queries in the portal. That works fine for normal queries based on normal InfoCubes, DSOs and with hierarchies. But we have got one query that is based on master data (0mat_sales) - if the user wants to see this query he gets a message"You do not have the authorization for component <name of the query>".
I added object class S_RS_IOMAD but it didn't help. I also made some tests with changes on S_RS_ICUBE and S_RS_IOBJ but it also didn't help.
Has anybody an idea which authorization object class to use or how to configure this?
Greetings & Thanks a lot
Bettina

Hello,
here's the solution:
I traced the steps of the user for executing this query based on master data by transaction ST01.
The following authorization has to be given:
S_RS_COMP
Activity:Execute
Info Area: <InfoArea where the master data can be found>
InfoCube: 0* <or other names for own master data objects>
Name of reporting component: <name of the query>
Type of reporting component: Query
Greetings
Bettina

Master data exraction problem

Hi,
I am facing some problem in master data uploading into BW. The details as follows. I am trying for 0Customer & 0Materials. I have checked system connection R/3 to BW is ok
The Errror in Monitore screen
Requests (Messages) everything is ok.
Messages : Missing Messages
Transfer IDoc and TRFC : Error Occured
Application documents Not posted
Could any one help me to resolve this problem. I'll give you full pints

Hi Roberto,
Thanx for ur reply, I have checked source system in RSA1, It shows everything is OK.
I dont have authorization of ST22, So I m not able to find any ABAP dump. But I dont think this dump will be there....
Thanx
Manoj

SID problem in Master data

Similar Messages

Maybe you are looking for