SID Rename of a PI/SLD/DI system

Has anyone performed a system copy+SID rename of a NW2004S system with PI/SLD/DI on it?  Is this possible?  It seems like there would be a significant amount of configuration with the SID name embedded in it and practically everything would have to be reconfigured after the copy.  This is a prototype system/sandbox which has been asked to be renamed.  I'm wondering if it would be faster to perform a new install as there hasn't been significant development on this box.

Hi David
I will tell you the simple steps
1.Create an export CD of the parent SID
2.Perform the normal system copy procedure.You can change the SID
3.The catch is once systemcopy is done you have to check few things:
a.Go to configtool----securestore and check if the details of new SID is updated if not change it.
b.Cross check the SLD most of the times the SLD points towards older SID,you have to correct it.
c.Check instanceprofile as well as other profile parameters,see if the details of new SID is updated.
If you have any problem feel free to ask.Its a simple stuff and you will be able to do it.
Reward suitable points

Similar Messages

  • Error while reading the ID of own business system from the SLD for system

    Hello,
    I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>ZTA</SAP:P1>
      <SAP:P2>013</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Can anybody help me?

    Probably, its due to incorrect RFC Adapter properties in config.
    Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click  on Service-->Adapter Specific Parameters.
    Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
    If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
    After this, you can retry sending the message.
    Rgds
    R Chandrasekhar

  • SLD - Logical System Management

    Hi,
    We are implementing XI and we have the problem with SLD logical system management. The problem is that we use the same Logical system name (Ex. PRDclnt350) for all the systems to avoid running lengthy BDLS process when we hook our R3 systems to their respective BW systems.
    Can you please suggest how we take care of this in XI -SLD landscape as it requires unique logical system names for each Business System when maintaining in SLD.
    Can we have multiple SLDs and will it take care of the issue. If so can we take one of them as the master SLD and the rest as slave SLDs. What would be the best practices for synchronizing them. Any help in this regard is greatly appreciated.
    Thanks and regards..
    Haritha

    Hi All,
    We opened an OSS note with SAP regarding this. Please see the question we asked and the response we got from them regarding the SLD maintenance:
    Hi,
    We are on BW 3.5 and SAP ERP 5.0. We are implementing XI now. So we
    need to configure SLD and register our Business systems. The problem is
    we have the concept of using the same logical system for all our SAP
    systems, say WRPCLNT750, when we are hooking our systems to their
    respective BW systems. And in SLD, we have problem becuase of this, as
    it recommends to have unique logical system name for each Business
    System being registered.
    We want to mention some points in here about our landscape and some of
    the recommendations we got from SAP regarding this. Ours is a very big
    warehouse system and in order to avoid the lengthy "BDLS" runs, SAP
    recommended using the same Logical System name for all the SAP systems.
    Hence we are using the same logical system name for our systems.
    So now coming to our problem, can you please tell us what would be the
    best practice that needs to be followed now for SLD Business System
    registration. How can we overcome the hurdle of NOT having a unique
    logical system name for our systems in central System Landscape
    Directory.
    Please let us know the solution as early as possible.
    Thanks and regards..
    Haritha.
    The Response:
    Hello Haritha
    I have found some pass cases with the same question that you have,
    however, the replies from developer are as below.
    Logical systems cannot be duplicated within the SLD, that means one
    Business System per Logical System name, both need to be unique, the SLDis working a designed here.
    I would suggest you rename one of the copies of the productive system
    to solve this.
    My apology that I couldn't provide you a better answer for this.
    Thanks & Best Regards
    Andy Lam
    Active Global Support - SolMan & Technology
    Kindly, please let me know your suggestions.
    Thanks and regards..
    Haritha.

  • SAP SID Rename using SWPM

    Hi All,
    I am trying to perform SAP <SID> rename using SWPM 1.0 SP6 and getting the following error.
    <html> <head> </head> <body> <p> An error occurred while processing option <i>System Rename > Central System > SAP System Rename( Last error reported by the step: The JVM reports an exception during execution of class ( com.sap.sdt.ins.component.ora_clone_db_post_dia.DiSchemaUsersAndListener_validator ) and function executeStepClass. DIAGNOSIS: The reported error message from JVM is: com.sap.sdt.sltoolbox.kdb.KdbException: no server version found in /oracle/<SID>/11203
            at com.sap.sdt.ins.component.ora_clone_db_post_dia.DiSchemaUsersAndListener_validator.updateTOraCopyInformation(DiSchemaUsersAndListener_validator.java:168)
            at com.sap.sdt.ins.component.ora_clone_db_post_dia.DiSchemaUsersAndListener_validator.execute(DiSchemaUsersAndListener_validator.java:70)
    .)</i>. You can now: </p> <ul> <li> Choose <i>Retry</i><br>to repeat the current step. </li> <li> Choose <i>Log Files</i><br>to get more information about the error. </li> <li> Stop the option and continue later. </li> </ul> <p> Log files are written to /tmp/sapinst_instdir/NW70/SBC/CENTRAL. </p> </body></html>
    FYI: I have unmounted the source <SID> file systems and monuted back with target <SID>
    Could you please do the needful.
    Thanks and Regards,
    Prasad

    Hi Srivastava,
    Thanks for the quick responce !!
    Yes, it is mentioned in the System Rename Gude(Page# 22).
    https://websmp205.sap-ag.de/~sapidb/011000358700000664952012E
    Unfortunately it is not writing the error logs at OS level other than attached
    in my previous message.
    Thanks and Regards,
    Prasad

  • Error while reading ID of own business system from the SLD for system D18

    Dear guru's,
    I have almost completed a file2proxy scenario but I'm stuk on the following.
    When sending a message the outbound adapter says:
    <b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
    What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
    Any suggestions?
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>D18</SAP:P1>
      <SAP:P2>200</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>

    Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
    Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
    here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
    Hope you problem is fixed

  • Error while reading ID of own business system from the SLD for system DPI

    Hi All,
    My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
    In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
    Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
    Please help me out.
    Thanks
    Kiruthi
    Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

    Hi,
    Check transaction SLDAPICUST for correct SLD configuration.
    http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
    ~Sanv...

  • SLD Technical system data in ABAP table?

    Hi All,
    Can some one guide me ABAP table name where I can see all the SLD Technical system entries?
    Or can read SLD Technical system entries via some BAPI/RFC.
    Regards

    Check LCR_GET_BS_DETAILS. In se24 check for Cl_SLD* , you will get some classes which will help you get the information.
    What are the Technical system data you are looking for ?
    In program SXMS_PF_GET_OWN_IS_NAME_MC , go through the subroutine get_sld_content.

  • Adding pipeline url in SLD buisness system

    Hi,
    I am trying to add "pipeline URL" in an exisitng buisness system in a central SLD. The role of the buisness system is Integration Server. But i am not able to save the pipeline url , after clicking the save, the url value is again showing as blank.
    i have checked the SXMB_ADM in integration server and the url value is showing as correctly and also successfully loaded the system configuration from SLD with correct Integration server url.
    How can i make the pipeline url entry in SLD buisness system definition?

    The role of the buisness system is Integration Server.
    Does that business system refer to the XI system? Ususally only XI business system is assigned as the role of Integration server. Make sure that if it is an R3 or ECC system, the role is Application Server.
    Regards,
    Prateek

  • SLD - Technical System Wizard - Select System: Only None (Standalone J2EE)

    Hi, I want to connect to some RFC-Modules on a SAP/R3 System from my NetWeaver Web DynPro Application. Therefore I have to create JCO-Connections for the Models I created (MODELDATA_DEST and RFC_METADATA_DEST). For this I have to define the System I want these JCO-Connections to connect to in my SLD which I'm trying to do using the "Technical System Wizard". (SLD -> Technical Landscape -> New Technical System -> Web AS Java (because I'm developing a Java Application).
    In the next screen I have to specifiy the location of my Server. I thought, that here, I have to define my SAP/R3 Server to which the JCO-Connections for my two models shall be connected. But the only option I can choose for "Web AS ABAP" (The ABAP System where my RFC-Modules are stored I guess) is "None (Standalone J2EE)".
    Why is that? Or am I missing something? I thought I have to specify the SAP/R3 System containing the RFC-Modules here and not my local NetWeaver Server.
    Thanks for your help
    Thomas

    Hi,
    there seems to be a misunderstanding here. For JCO to work you need to set up the ABAP-System as a technical system in SLD, otherwise the Java-System is not able to determine information like Hostname and Portnumber for the RFC. Of course it's good to set up your WAS-Java in SLD as a technical system as well, but for the JCO the ABAP side is more important as far as I can see.
    To have a clean start I suggest that you set up all involved technical systems in your SLD.
    Regards,
    Jörg

  • SID Problem : could not register two ABAP systems with same SID

    Dear Expert:
    We have to register two ABAP systems on different host to SLD, and these two systems have same SID.
    We use rz70 to do this,  but we found the lastest registration will overwrite the previous registration,
    that
    means we could register them both in the same SLD. (we checked this in Technical system area).
    How could we do this?  It makes us crazy........
    Thanks very much
    Ray

    Dear Stefan,
    Thanks so much for your anwser.
    But the dilemma is in one SLD we achieved this, but it is only for one case and we could
    not apply this for other systems.
    This is the snapshot in our SLD for techical system:
    Name                                        Host                             Version                                     Last Update
    D01   on eisdq01                     eisdq01                         700                                           2010/12/06 12:45
    D01   on eisdv01                     eisdv01                         640                                           2010/12/06  11:40
    We don't know if this is the illusion that SLD could do this?  But for other systems, e.g two Q systems
    the lastest registration will overwrite the previsou one.
    Thanks very much.
    Welcome suggestions from very guru.
    Ray

  • Change Object Server in SLD after system copy and SLD move?

    Hello,
    we did the following:
    - we migrated the SLD to the production system in our landscape
    - we copied the NWDI to a new system
    - the old object server was named sapsrv88 (object server attribute in the SLD) which was the hostname of the old SLD server
    Do I have to change the object server attribute to the new hostname of the SLD? Does this have any influence on the software components that we allready developed?
    Thanks and best regards
    Jens

    Hello Jens,
    you can rename the object server - details you'll find in SAP note 935245
    When you rename it, the ID of the objects in the SLD is changed to the new ID, so normally you shouldn't have any problems with that.
    If you're unsure about it, you can backup your SLD content using "Administration => Content => Backup => All Instances" - that backs up everything under /sld/active
    or backup the software components you devoped using http://<hostname>:5<instance-no.>00/SCD/SCDownload
    Best regards
    Cornelia

  • Renaming a Product in SLD

    Hi All,
    I have two products in the SLD, Product1 and Product2, Product1 has SW1 and SW2. All the development is done in the SoftwareComponents of Product1. I need to get the same with Product2, i.e something like assign SW1 and SW2 of Product1 to Product2. Is there a way to achieve this without recreating the IR objects.
    The actual requirement is to RENAME Product1 to Product2. Is there a way to achieve this or could you help with the solution suggetsted above. We are using PI 7.0
    Regards,
    Chandra

    Hi Sarvesh,
    using the configurator in the Integration Directory will save some time. After reimporting the Business System you let the configurator reconfigure receiver determinates, interface determinations and so on.
    Regards
    Thomas

  • Error while reading ID of own business system from the SLD for system

    Dear all,
    We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
    - SLDCHECK reports no errors
    - SLAPICUST: pointing to the SLD
    - SXI_CACHE with full refresh: no result.
    Does anyone have a clue for me?
    Kind regards,
    John.

    I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
    1. First try to clear full SLD cache and then test.
    2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario.

  • SLD Logical System Name Changes not taking effect in IDOC

    All -
    I've had to change a logical system name in the SLD, everything appears to be okay but new Idocs are still posting with the old LS name - any suggestions as to where to look for the old name would be most appreciated.
    Thanks!

    Hi Dennis,
    After changing the logical system name in SLD have you done "Compare with  SLD" from Service --> "Adapter-Specific Identifiers" for Business system in Integration Directory?
    - Pinkle

  • SLD Business system not appearinn in Integration Directory Configuration

    Hello,
    I have configured a business system in SLD(defined a Technical system,assigned it to a business system),but when i go to
    Integration directory and assign a business system without a partner,I am not able to see this business system.
    can any one please help.
    regards
    kaushik

    environment -> clear SLD cache

Maybe you are looking for