SID 's generated for characterstics

Hi all,
Is there a limit to the SIDs that gets generated for characteristics in SAP BI(and if yes,how many)
Pls let me know.
Thanks in advance.

Hi Pallavi,
As mentioned earlier, there is no limit for the SID's.
To view the SID # range, go through the following path:
InfoObject>Right Click>Change>Menu>Extras>Number range Object>SID
To change the number range object for SID
Use T-code SNRO
Please assign points if this is helpful.
Regards,
Rahul

Similar Messages

How to look at sid tables generated for an ods?

Hi all,
There is atrns code : listschema which enables to have a look of the sid tables generated for infocubes.
Is there any trsn code where we can see the list of sid tables generated for ods. if not let me know the procedure how to look at the sid tables generated for ods.
regds
hari

hi,
i think u will try like this:
go to transaction code SE11
TYEP UR NAME LIKE THIS:
EX: /BIC/AODS_CUS00XXXX
BI: MEANS business defined
C: customer
0 : SAP defined
A: Active data table of ods
TYPE LIKE THIS : /BIC/ODS NAME * (STAR)
YOU MAY GET VALUES:
THANKS, KR

How to identify and look at the sid generated for ods?

hi all,
Can anyone let me know how to identify the sid id generated for ods and look at the sid id generated for any ods.
thanxs
haritha

Hi,
NO SIDs are created for ODS,
When Creating an ODS if we select BEx Reporting Check Box then the SIDs for the Master Data will be created.
Actually SIDs are created when Activate Master data and Dimension Ids are created when we Activate Transactiona Data.
Hope This Helps,
Regards,
rik

SID not getting Generated for Fiscal Yr

Hi,
I have fiscal yr varaint Z9, year dependent. The settings are maintained for 2008 and 2009.
This is also present in the Table T009B.
However, when I check the SID table I only see SIDS generated for 2009.
I am loading a flat file into a DSO and then to a Cube.
DSO , setting DO NOT Generate SID. So the flat file load there fine.
But when I load the data to the Cube, then I get the error
"Fiscal year variant Z9 is not maintained for calendar year 2008"
Regards,
Dheeraj

Hi,
Are you using 0FISCYEAR if yes it doesnt refer to T009B table. Hope in the DSO fiscal Year used in Base DSO is of 4 Digit length.
If not there may be possibility of space coming from flat file to DSO which in turn when loaded with space result in error in Cube.
Also if you are using infopackage to load to Cube check to load data though master data doesnt exist.
Hope this helps for you.
Thanks,
Arun

I can access internet via boot camp with windows 7, but not when I use the Mac w/Mt Lion side. Thanks for any tips!

I'm using a 2012 Intel-based iMac with Mt. Lion and Windows 7 with Boot Camp. I used to be able to access the internet on both sides. Now, my only internet access is through Boot Camp. At one point, access was unable on both sides but IE in Windows 7 automatically diagnosed the problem, changed some settings (which I don't know) and I could access the internet on both sides . . . for a while. Now, I can only get online in Boot Camp. Since IE detects no problems it doesn't apply the fix as it did before. Does anybody know what's going on?
I should mention that I installed Boot Camp because there is no Mac version of the software (VantagePoint) I need to use (duh). I wanted to be able to use the software w/o rebooting all the time so I installed Fusion. Of course, I didn't ask the VantagePoint techs if this would solve my issue. It didn't - VantagePoint won't work with Fusion, but it will with Parallels. So I installed Parallels and imported Boot Camp. Apparantly, it was not set up properly, I'm getting all kinds of errors reported in Console (e.g. "Found cross-bounds GPT partition. GPT disk detected," mdworker cannot talk to sandbox, etc.). The VantagePoint techs say the first step in a VM retry is to regain internet access to the Mac.
Anybody who can help will become my new best friend. Thanking you.
Message was edited by: Marmadukemark
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Mark-PC
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Bluetooth Network Connection 2:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network) #2
   Physical Address. . . . . . . . . : 44-2A-60-CF-D0-93
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection 2:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
   Physical Address. . . . . . . . . : 32-9A-DD-9F-1D-FF
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
I neglected to add that I'm using using ethernet with a cable modem. I'm the only user, so it's not networked for others. Below is the report that was generated with respect to the connection problem - when Boot Camp could not access the internet.
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
   Physical Address. . . . . . . . . : C8-2A-14-1B-EE-D1
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::a47a:3af7:72e6:f899%11(Preferred)
   Autoconfiguration IPv4 Address. . : 169.254.248.153(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 348662292
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-CD-DA-86-10-9A-DD-9F-1D-FF
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Wireless Network Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Atheros AR938x Wireless Network Adapter
   Physical Address. . . . . . . . . : 10-9A-DD-9F-1D-FF
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter 6TO4 Adapter:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft 6to4 Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{077AEF3E-6752-42C5-A037-9FB69A17CB27}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{83EF0082-ADD7-4283-8303-9133BD882E39}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{22AA845D-6210-4549-AAE5-3D8917BA7286}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{D364C869-F7DD-4F9A-ADBA-7EBF53DD21D2}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Are you using a MacBook Pro? Is everything installed on the same drive?
I would love to know how that install was performed. When I install Windows under boot camp, my MacBook Pro drive ends up with 4 partitions: Mac, Mac Recovery, Windows, and a small partition that I believe is used by boot camp.
Installing BitLocker on Windows requires the creation of a new small partition that Windows will boot off. The small partition is unencrypted, while the primary Windows partition will get encrypted. The following post discusses the maximum partition issue: https://discussions.apple.com/message/22753791#22753791
Has anyone installed Windows through boot camp on it's own drive, and if so, can BitLocker be installed on that without reaching any partition limit? I'm assuming that's possible, but would like to know before I spend hundreds on new hardware.

No Business Partner generated for new employee transfer from ECC to SRM

Hi All,
I am working on SRM 5.0 with ECC 6.0 backend. The HR structure is replicated from ECC using ALE, message type:HRMD_ABA.
When I am trying to replicate a new employee from ECC to SRM, I run the O-insert first, then the S-insert and then the P-insert using PFAL transaction.
The Org structure was already in place in SRM, so it just adds the new position to it by A003 relation. The S-insert generated idoc shows status as '53' in both ECC and SRT with the relation A003, B007 and A008. But, when I check the table HRP1001, the A008 entry is missing. Due to this, no CP is generated for this position and also no business partner is generated for this user.
When I run the P-insert for this employee, the idoc is posted in ECC. But, the status of the idoc in SRT is '52' and the message shown is "The Parameter Country Has Not been Entered During Naming Format Check" Message No. R11206.
I checked the Name Format for this employee, and it is maintained as 2.
Where am I going wrong? Why is no CP person generated even when the idoc status is 53? Why isn't the new employee getting transferred to SRM server?
I have checked the SAP notes related to HR-ECC Org transfer, but I am unable to figure out the reason for this problem.
Could anyone help me out in this?
Regards,
Ancy

Maintained the name format tables (SA13)on ECC and SRM side.

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

Dear Friends,
I am absolutely agree with your answer .
But my question is,
Lets say.....
One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
Hope you all understood my requirement .
Thanks & Regards,
Aditya

Wrong Absence Quota generated for change of entitlement

Hi experts,
I have one employee joined somewhere in mid January 2008 (his IT000 start date, IT0001 start date, and IT0041 date is the same, i.e. mid Jan 2008).
The Annual Leave Base Entitlement setting (V_T559E) for his particular grouping is based on seniority:
Seniority 0 - 4 = 15 days
Seniority 4 - 9 = 18 days
Base period is : Calendar Years.
At the Selection Rule (V_T559L) :
- Accrual Period tab => Monthly (Take account of Change of WPBP is checked)
- Base Entitlement => Key date for determining seniority = Date Type (from IT0041)
- Accrual Entitl. => Pro rate calculation = selected
Up to last year (2011), the AL entitlement generated for the emp is 15 days (12 * 1.25). Which is correct.
When I create for next year (2013), 18 days is generated (12 * 1.5). Which is also correct.
For this year, 2012, I expect to see 18 days (or 17.75?). However I'm seeing 19 days.
After debugging, I found that for month of January, 2 entitlements are calculated.
Take for example the employee joined on 21 January 2008.
There were 2 records generated by HR_QTACC_QUOTAS_GENERATE:
1. 20.01.2012 with 1.25 day
2. 31.01.2012 with 1.25 day
For Feb until Dec 2012, I'm seeing 1.5 day for each month (which is correct). I.e. :
Feb: 28.02.2012 with 1.5 day
Mar: 31.03.2012 with 1.5 day
... and so on until dec
Dec: 31.12.2012 with 1.5 day
They all add up to 19 days.
Any advice on what should be corrected here?
Thanks in advance!

Hi, Yuki!
In your example, can you tell us how should it accumulate if the seniority date is in june/2012?
And another doubt, what is your accrual period?
What Iu2019ve understood every seniority change youu2019ll have this problem, if the employee starts in the company during the middle of the month.
Please answer that two questions, so I try to do some test here.
Regards,

Invoice getting generated for 103 MT not for 105 during ERS

Hi Experts,
I am facing one problem ,our client follows 103- 105 Mvt procedure for GR.
the requirement is to create automatic invoice through MRRL for movement type 105 but instead zero value invoice is getting generated for 103 MVT
Please suggest.
Regards.

Hi,
Does 105 is performed for your PO .
Before running MRRL.
Does GR based IV and ERS indicators are ticked in PO?
Do also check the below KBA it may help you.
1543167 - Invoice is posted with zero amount in T-code MRRL

ANN: XML Class Generator for Java Available

The Oracle XMCL Class Generator for Java is now available as an
initial beta release on the Oracle Technology Network at
http://technet.oracle.com. Select 'xml' from the Technology menu.
The XML Class Generator will generate a set of Java source files
based on an input DTD. The generated Java source files can then
be used to construct, optionally validate, and print a XML
document that is compliant to the DTD specified. This is an early
beta release and has the following features:
* Creates Java Classes from DTDs to enable the programmatic
construction of XML documents.
* Supports validation mode to assist debugging.
* Works with the Oracle XML Parser in Java.
* Creates documents conforming to the W3C XML 1.0
Recommendation.
* Supports creating documents in the following encodings:
UTF-8
UTF-16
ISO-10646-UCS-2
ISO-10646-UCS-4
US-ASCII
EBCDIC-CP-US
ISO-8859-1
Shift_SJIS
Oracle XML Team
http://technet.oracle.com
Oracle Technology Network
null

Thanks,
Rob
Oracle XML Team wrote:
: First, the link has been fixed. As to your access exception,
we
: have traced it to a difference between JDK 1.1.x and JDK 1.2.
: You can solve it by using a 1.1.x version of the JDK or wait
till
: our production version of our XML Parser becomes available
within
: a week which will work with 1.2.
: Oracle XML Team
: http://technet.oracle.com
: Rob Edagr (guest) wrote:
: : 1) The HREF on the download page for the NT version points
to
: : the version 102 parser not the classgen.
: : 2) After downloading and installing the classgen (by
guessing
: : what the url was) I ran it and get the following
: : C:\jdk1.2\xml\ora\classgen\sample>java SampleMain -root
: : wddxPacket wddx_0090.dtd
: : Exception in thread "main" java.lang.IllegalAccessError: try
to
: : access class oracle/xml/parser/XMLNode from class
: : oracle/xml/classgen/ClassGenerator
: : at oracle.xml.classgen.ClassGenerator.generate
(Compiled
: : Code)
: : at SampleMain.main(SampleMain.java:65)
: : Any idea on what the problem is (same error with sample dtd)
: : Rob
: : Oracle XML Team wrote:
: : : The Oracle XMCL Class Generator for Java is now available
as
: : an
: : : initial beta release on the Oracle Technology Network at
: : : http://technet.oracle.com. Select 'xml' from the
Technology
: : menu.
: : : The XML Class Generator will generate a set of Java source
: : files
: : : based on an input DTD. The generated Java source files can
: : then
: : : be used to construct, optionally validate, and print a XML
: : : document that is compliant to the DTD specified. This is
an
: : early
: : : beta release and has the following features:
: : : * Creates Java Classes from DTDs to enable the
programmatic
: : : construction of XML documents.
: : : * Supports validation mode to assist debugging.
: : : * Works with the Oracle XML Parser in Java.
: : : * Creates documents conforming to the W3C XML 1.0
: : : Recommendation.
: : : * Supports creating documents in the following
encodings:
: : : UTF-8
: : : UTF-16
: : : ISO-10646-UCS-2
: : : ISO-10646-UCS-4
: : : US-ASCII
: : : EBCDIC-CP-US
: : : ISO-8859-1
: : : Shift_SJIS
: : : Oracle XML Team
: : : http://technet.oracle.com
: : : Oracle Technology Network
: Oracle Technology Network
null

Inputs on capabilities of Noetix Generator for OBIEE requested

Hi,
We are looking into a scenario where we are required to migrate large number of Discoverer 4i reports to OBIEE. We have good number of custom reports and views too that are to be migrated.
I am aware that [Noetix Generator for OBIEE|http://noetix.com/Products/NoetixGenerator/OracleBISuiteEEPlus.aspx|Noetix Generator for OBIEE] can handle it to some extent, but at the repository level - how seamless is the integration and how much customization/ETL would be required for the custom reports to be built on custom views (say 50 reports from 60 custom views).
Appreciate inputs from the experts based on their previous experiences.
Regards
KSK
Edited by: user633620 on Sep 30, 2008 9:53 PM

Hi,
We are looking into a scenario where we are required to migrate large number of Discoverer 4i reports to OBIEE. We have good number of custom reports and views too that are to be migrated.
I am aware that [Noetix Generator for OBIEE|http://noetix.com/Products/NoetixGenerator/OracleBISuiteEEPlus.aspx|Noetix Generator for OBIEE] can handle it to some extent, but at the repository level - how seamless is the integration and how much customization/ETL would be required for the custom reports to be built on custom views (say 50 reports from 60 custom views).
Appreciate inputs from the experts based on their previous experiences.
Regards
KSK
Edited by: user633620 on Sep 30, 2008 9:53 PM

Schedule Lines generated for expired Scheduling agreements

Hi All,
We are facing problems in Scheduling agreements.
Schedule lines are getting generated for those agreements whose validity has expired(i.e Validity in Past).
Is there any check to restrict those Scheduling Agreements??
Please Help.
Regards,
Ritesh.

from OSS note 914607 - FAQ: Validity and status of scheduling agreements
1. Question: When I process scheduling agreements without delivery schedules, I have the option to specify the validity of the scheduling agreement: "Valid" and "Valid to". What role does the validity play when the scheduling agreement is processed?
Response: In the case of scheduling agreements without delivery schedules, the system checks the validity of the scheduling agreement if you create a new schedule line or change an existing schedule line. If the schedule line date is outside the validity interval, a warning message is issued. You can then decide whether or not to create the schedule line or whether to adjust the validity of the scheduling agreement. No error message is issued.
2. Question: What role does the validity play in the case of scheduling agreements with delivery schedules?
Response: The function is similar to scheduling agreements without delivery schedules. The only difference is that the entry of the validity is optional (unlike scheduling agreements without releases) and this is not checked by the system. If the validity is missing, the system does note issue a warning message. If you specify the validity, the system behaves in the same way as for scheduling agreements without releases.

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

SQLloder scripts not getting generated for CLOBs

I am trying to migrate MYSQL 3.23 database into Oracle 8.1.7 and after creating the Oracle model and after converting the MYSQL text datatype into CLOB of the Oracle model the SQLloader scripts is not getting generated for CLOB datatypes. I mean the scripts are getting created but there is no change in the script for CLOB datatype.
The script generates the following for the table containing CLOB datatypes:
mysqldump -h <HOST> -u <USERNAME> -p<PASSWORD> -T <DESTINATION_PATH> fields-terminated-by="<ec>" lines-terminated-by="<er>" test av_wbt_course
Please let me know how to load data when the datatype is of CLOB ?

I was able to resolve this issue by using OWM Oracle Migration instead of using offline method by sqlloader scripts.

Planned order not getting generated for FG

Dear Experts,
Planned orders not getting generated for the Finished Goods - X which is having MRP Type M0 - MPS fixing type strategy group 20 which is copied fron another FG - Y , its a new product and production plan has been updated through MC88 - Rough cut planning but the planned orders are not getting generated.
And for the material valid production version exists with selection method 3 and individullcollective as 1.
Please let me know what might be the possibalities and what all the key fields i need to check.
Thanks & Regards,
Sampath
Edited by: sampath s on Jul 13, 2011 11:31 AM

Dear,
In general MPS is run for High value items ( if you use like Gold , Platimum or A class items. ).
Always only single level is used for Explosion and planning. then only you can analyse the requirements at each stage before procurement.
Otherwise if you run MPS to multi level, Bottom most high value will be procured without any notice to authorities. Even you may cancel the process in mid way. At that time what will happen to the procured high value material.
So for that purpose only single item single level MPS concept is evolved.
Fo that you run MPS at single level so that only for the first level MPS will be carried out.
Check and revert back.\
Regards,
Alok Tiwari

SID 's generated for characterstics

Similar Messages

Maybe you are looking for