Side B PGs Not Active
Hi all, we have a customer with UCCE 8.0.2, we are facing an issue that at Side-B Router Ccagnet process it shows "inservice" status but doesn't show any PG out of 3 configured and when we check the CCM PG and VRUPG status it shows "Not Active". Every machine can ping each other and DNS is resolving the machine names as well while Side-A is working perfect. Attache is the screen shot of "ccagent" process.
The information you provided is pretty limited, but I'm going to make a guess anyway : your private network between the PGs is down.
I believe that's the case because :
The A side is working correctly as per what you stated
Still the B side MDS is In Service
PG Agent is Not Active on the B side but still your Router's CC Agent seems to be rejecting a PG Agent at 10.30.30.13, I'm going to assume that's your PG B's public IP ?
I.e. the only reason PG B would try to register as the active pgag to ccag would be because it doesn't know that the A side is up and running.
If you provide some creenshots of the following processes that should shed more light on the situation :
ccag on both Router ends
mdsproc on both PG ends
pgag on both PG end
Cheers,
Kris
Similar Messages
-
Itunes card not activated and noone seem to be able to belp
I have been dealt with 8 different people.
I tried activating my itunes card through online process back in Dec 16, 2013. Follow# 304731545 - junayed, nothing from him until
Jan 3- i emailed for update - "Your inquiry is very important to me, so I have requested assistance with the issue you reported. You will receive an email after the matter has been investigated and further information is available."
Jan 4- " I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance."
THAT WASN'T MY ISSUE.... THE ITUNES CARD BEING NOT ACTIVATED NOT THE ITUNES STORE. I replied advising him again what issue is and sent him AGAIN all the attachments he needed.
Jan 6 - "Jaimy, we are sorry for the inconvenience. As per the Apple policy, we are unable to process your query any further. I would like to request you to contact the Apple store from where you have received the gift card." (I did in jan 10th)
- the same day i called explained my situation and was transfered 554529946 - chanile, she was nice seemed she was trying to help me but we got cut off. She didnt call me although she knew my number.
I called again 554616314 (didnt get his name was again nice) advised to make another claim online.
So I did 308483126- ajitesh. Submitted the receipt and picture of the card.
Jan 7 - same email like junayed asking " I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance."
Jan 10 - finally decided to go to the store (45 mins away with the winter driving conditions). I asked a guy to help and i was directed to someone else. I believe his name was scott. Told him my situation. He said he cannot help because it was outside the 30 day from purchase. Adv to call because nothing he can do, he didnt even bother to look into my situation.
Jan 11 - i called, spoke to a lady, about 40 mins later i was transfered to a gentleman. All in all 53 mins later, online is the only way to go about resolving this. Even thought Junayed had already said he cannot do anything and go to the store.
I am so helpless and disappointment at the level of customer service. The effort i have to put in to getting an issue resolved.
Noone seem to know how to help me other than "online" when the "online" had asked me to go to the store, which then advised me to call, which then advised me back to go "online"
Can anyone help??????We are fellow users here on these forums, you're not talking to iTunes Support nor Apple.
If the store that you bought it from can't/won't help then only iTunes Support can potentially do so. When you've been contacting online support you've been referring to your case numbers and what you've been told each time ?
And this is the link that you've been using : http://www.apple.com/support/itunes/contact/ , clicking on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes -
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Hi
ABAP instant of ECC6 System is started but Java instant isnt started please find below of dev_w0
And i found error in dev_w0 is DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active and in dev_disp is DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
Error ==> ThPlgSend00B: MpiwriteOutOfBand <d> failed (14)
Error ==> DLoadLib: Loadlibrary (D:\usr\sap\xxx\DVEBMGS00\exe\dbsdbslib.dll)
Error 126 = "the specified module could not be found"
Error => Couldn't load library 'D:\usr\sap\XXX\DVEBMGS00\exe\dbsdbslib.dll'
Please find below dev_w0 and dev_disp
A Fri Apr 25 16:56:30 2008
A
A -PXA--
A PXA INITIALIZATION
A System page size: 4kb, total admin_size: 10332kb, dir_size: 10260kb.
A Attached to PXA (address 5F620040, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Fri Apr 25 16:56:31 2008
A ABAP ShmAdm attached (addr=43A0C000 leng=20955136 end=44E08000)
A >> Shm MMADM area (addr=43E81EF8 leng=126176 end=43EA0BD8)
A >> Shm MMDAT area (addr=43EA1000 leng=16150528 end=44E08000)
A RFC Destination> destination ordvmsapecc_V37_00 host ordvmsapecc system V37 systnr 0 (ordvmsapecc_V37_00)
A RFC Options> H=ordvmsapecc,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 19000 bytes at 0A410040
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\V37\DVEBMGS00\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\V37\DVEBMGS00\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N
N Fri Apr 25 16:56:32 2008
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:700.08]):
B max_blocking_factor = 50, max_in_blocking_factor = 255,
B min_blocking_factor = 5, min_in_blocking_factor = 10,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.95.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [12]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume ordvmsapecc_V37_00
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
M
M Fri Apr 25 16:56:33 2008
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >ordvmsapecc_V37_00 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 25.04.2008 16:56:32 1209135392 / 3024
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 25.04.2008 16:56:33 1209135393 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 25.04.2008 16:56:33 1209135393 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L BtcSysStartRaise: Begin
L Raise event SAP_SYSTEM_START with parameter <ordvmsapecc_V37_00 >
L BtcSysStartRaise: End
S
S Fri Apr 25 16:56:34 2008
S server @>SSRV:ordvmsapecc_V37_00@< appears or changes (state 1)
S server @>SSRV:ordvmsapecc_V37_00@< appears or changes (state 1)
C
C Fri Apr 25 17:02:53 2008
C The IRow interface is supported by this OLEDB provider
B table logging switched off for all clients
S
S Fri Apr 25 17:03:56 2008
S found spool memory service RSPO-ACTIONS at 27719C38
Please find the dev_disp file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid V37
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, Unicode, optimized
pid 4832
Fri Apr 25 16:55:20 2008
kernel runs with dp version 224000(ext=109000) (@(#) DPLIB-INT-VERSION-224000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
Fri Apr 25 16:55:21 2008
***LOG Q00=> DpSapEnvInit, DPStart (00 4832) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Apr 25 16:55:25 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ordvmsapecc_V37_00 <
DpShMCreate: sizeof(wp_adm) 25776 (1432)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1520)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 071C0040, size: 4898888)
DpShMCreate: allocated sys_adm at 071C0040
DpShMCreate: allocated wp_adm at 071C1E80
DpShMCreate: allocated tm_adm_list at 071C8330
DpShMCreate: allocated tm_adm at 071C8360
DpShMCreate: allocated wp_ca_adm at 075D17A0
DpShMCreate: allocated appc_ca_adm at 075D7560
DpShMCreate: allocated comm_adm at 075D94A0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0765A360
DpShMCreate: allocated gw_adm at 0765A3A0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0765A3D0
DpShMCreate: allocated wall_adm at 0765A3D8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Apr 25 16:55:28 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 1999 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 5168
argv[0] = D:\usr\sap\V37\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\V37\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\V37\SYS\profile\V37_DVEBMGS00_ordvmsapecc
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1789
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=V37
argv[7] = -DSAPMYNAME=ordvmsapecc_V37_00
argv[8] = -DSAPPROFILE=D:\usr\sap\V37\SYS\profile\V37_DVEBMGS00_ordvmsapecc
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Please guide me to solve the issue..
Thanks
Jayson.
Edited by: Peter jayson on Apr 28, 2008 9:52 AM
Edited by: Peter jayson on Apr 28, 2008 9:55 AM
Edited by: Peter jayson on Apr 28, 2008 10:02 AMHi Juan,
i checked in SM52 But in VMC is not loaded
Shared GC is inactive
Global Classes is 0 bytes
Global programs is 0 Bytes
Global Data is 0 Bytes
Other Global Data is 0 Bytes
Error Occured 0
Please guid me how to load the VMC and make the active the Shared GC
Thanks
Jayson -
Aloha, apple-community
It seems like i have a very big problem. A few months ago, i noticed first, my iPod wont rotate properly if i tilt it to the left or right sometimes. i had to tilt it twice and than it worked. But after a week, it completly stopped working. Whenever i turned my iPod to the right or left side, nothing happened.
So i had the idea to restart it, which fixed it for a short time. After the restart was done, i was able to tilt for about 2-5 mins, later the problem appeared again
Today, nothing is working. Even in Games my iPod wont tilt or even react to any motion i do...
Well, kinda novel, i know, but i want to be as precise as possible...
so here are the things i already tried:
- Updated iTunes to 10.5.2
- Restored to a Backup
- Restored to the factory settings
- Jailbreaked my iPod to downgrade to an earlier Firmware (from 5.0.1)
- updated again to 5.0.1
- i made sure, the rotation lock is off, so please don´t give me the advice to double tab the homebutton, swipe left and tab on the lock
- started crying and thinking about throwing the iPod out of the window
by the way, my warranty is not active anymore...
so please guys, do you have a solution or even an advice for me?
Greatly appreciated,
EliasI just searched the board and it´s funny to see, what i found out:
This Error ONLY appears with : iPod Touch 3Gen 32GB 2009 Models
and here´s the proove:
https://discussions.apple.com/thread/3624353
https://discussions.apple.com/message/11701607#11701607
https://discussions.apple.com/message/15434838#15434838
https://discussions.apple.com/message/12208783#12208783
https://discussions.apple.com/message/15289257#15289257
https://discussions.apple.com/message/5638997#5638997
https://discussions.apple.com/thread/3540043
https://discussions.apple.com/message/17047827#17047827
https://discussions.apple.com/message/15242814#15242814
https://discussions.apple.com/message/15521517#15521517
https://discussions.apple.com/message/15280916#15280916
https://discussions.apple.com/message/15277669#15277669
All those guys and girls have the same problem i also do
Please guys, give me an idea what to do or even reply if there is no chance :/
Message was edited by: e1i@zzz -
Hi Experts,
Please check this Developer Trace of Dispatcher, this is stopped, when I am restarting my server, it is giving errors :
running but not connected to message server,
and
running but dialog queue standstill, J2EE service unavilable.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid XID
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 52
intno 20050900
make: multithreaded, Unicode, optimized
pid 1412
Fri Sep 21 10:19:59 2007
kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 1412) [dpxxdisp.c 1231]
shared lib "dw_xml.dll" version 52 successfully loaded
shared lib "dw_xtc.dll" version 52 successfully loaded
shared lib "dw_stl.dll" version 52 successfully loaded
shared lib "dw_gui.dll" version 52 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Fri Sep 21 10:20:04 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5233]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >inggnh002sap_XID_01 <
DpShMCreate: sizeof(wp_adm) 12672 (1408)
DpShMCreate: sizeof(tm_adm) 3954072 (19672)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1452)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06510040, size: 4607512)
DpShMCreate: allocated sys_adm at 06510040
DpShMCreate: allocated wp_adm at 06511E28
DpShMCreate: allocated tm_adm_list at 06514FA8
DpShMCreate: allocated tm_adm at 06514FD8
DpShMCreate: allocated wp_ca_adm at 068DA570
DpShMCreate: allocated appc_ca_adm at 068E0330
DpShMCreate: allocated comm_adm at 068E2270
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06963130
DpShMCreate: allocated gw_adm at 06963170
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 069631A0
DpShMCreate: allocated wall_adm at 069631A8
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
MM diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1324
argv[0] = D:\usr\sap\XID\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\XID\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\XID\SYS\profile\XID_DVEBMGS01_inggnh002sap
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=2009
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=XID
argv[7] = -DSAPMYNAME=inggnh002sap_XID_01
argv[8] = -DSAPPROFILE=D:\usr\sap\XID\SYS\profile\XID_DVEBMGS01_inggnh002sap
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1617]
Fri Sep 21 10:20:05 2007
***LOG Q0K=> DpMsAttach, mscon ( inggnh002sap) [dpxxdisp.c 11414]
DpStartStopMsg: send start message (myname is >inggnh002sap_XID_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Fri Sep 21 10:20:06 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 52
Release check o.K.
Fri Sep 21 10:20:41 2007
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4235]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1492
(SI_ECONN_BROKEN; I4; ST; 127.0.0.1:2014) [nixxi.cpp 4235]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=1324)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Fri Sep 21 10:20:45 2007
ERROR => W0 (pid 2804) died [dpxxdisp.c 14021]
ERROR => W1 (pid 1484) died [dpxxdisp.c 14021]
ERROR => W2 (pid 2708) died [dpxxdisp.c 14021]
ERROR => W3 (pid 1464) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W4 (pid 860) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W5 (pid 2964) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W6 (pid 2508) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W7 (pid 3840) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W8 (pid 1072) died [dpxxdisp.c 14021]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:20:55 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Sep 21 04:50:55 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2804 Ended no 1 0 0
1 DIA 1484 Ended no 1 0 0
2 DIA 2708 Ended no 1 0 0
3 DIA 1464 Ended no 1 0 0
4 UPD 860 Ended no 1 0 0
5 ENQ 2964 Ended no 1 0 0
6 BTC 2508 Ended no 1 0 0
7 SPO 3840 Ended no 1 0 0
8 UP2 1072 Ended no 1 0 0
Dispatcher Queue Statistics Fri Sep 21 04:50:55 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Fri Sep 21 04:50:55 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Sep 21 04:50:55 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:00 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >inggnh002sap_XID_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (776) (SOFT_KILL)
Stop icman
killing process (2780) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:776 HANDLE:1572)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:01 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:776 HANDLE:1572)
wait for end of icman
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:02 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:03 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:04 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:05 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:06 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:07 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:08 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:09 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:10 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:11 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2780 HANDLE:1576)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1601
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 21 10:21:12 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2780 HANDLE:1576)
[DpProcDied] Process died (PID:1324 HANDLE:1556)
DpStartStopMsg: send stop message (myname is >inggnh002sap_XID_01 <)
NiIMyHostName: hostname = 'inggnh002sap'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Fri Sep 21 10:21:13 2007
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11698]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1516 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1516 (pos=3)
SiSelNRemove: removed sock 1516
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/9
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1516
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 1412) [dpxxdisp.c 10087]
Good Bye .....
Please Help, it is urgent,
Regards,
Study SAPHi Kaushal,
Thanks for your reply, there are many files with dev*.
Please check the log from file dev_w0 :
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Fri Sep 21 10:37:39 2007
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\XID\DVEBMGS01\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno 01
M sid XID
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3588
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3588) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Fri Sep 21 10:37:40 2007
M DpShMCreate: sizeof(wp_adm) 12672 (1408)
M DpShMCreate: sizeof(tm_adm) 3954072 (19672)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1452)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06510040, size: 4607512)
M DpShMCreate: allocated sys_adm at 06510040
M DpShMCreate: allocated wp_adm at 06511E28
M DpShMCreate: allocated tm_adm_list at 06514FA8
M DpShMCreate: allocated tm_adm at 06514FD8
M DpShMCreate: allocated wp_ca_adm at 068DA570
M DpShMCreate: allocated appc_ca_adm at 068E0330
M DpShMCreate: allocated comm_adm at 068E2270
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06963130
M DpShMCreate: allocated gw_adm at 06963170
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 069631A0
M DpShMCreate: allocated wall_adm at 069631A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host inggnh002sap
M
M Fri Sep 21 10:37:41 2007
M calling db_connect ...
C Prepending D:\usr\sap\XID\DVEBMGS01\exe to Path.
C
C Fri Sep 21 10:37:47 2007
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@XDI on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06AAFCF8 06AB5294 06AB4B1C
C Attaching to DB Server XDI (con_hdl=0,svchp=06AB4A68,svrhp=06AC6334)
C
C Fri Sep 21 10:37:48 2007
C Starting user session (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334,usrhp=06ADB0D8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@XDI on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06AAFCF8 06AB5294 06AB4B1C
C Attaching to DB Server XDI (con_hdl=0,svchp=06AB4A68,svrhp=06AC6334)
C
C Fri Sep 21 10:37:49 2007
C Starting user session (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334,usrhp=06ADB0D8)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 4345]
C Detaching from DB Server (con_hdl=0,svchp=06AB4A68,srvhp=06AC6334)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 10704]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1403]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10019]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server inggnh002sap_XID_01 on host inggnh002sap (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Fri Sep 21 10:37:49 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10204
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3588) [dpnttool.c 327]
Regards,
Study SAP -
IPad Mini Side-Switch Lock Always-Active Bug
Hi,
I have an iPad mini that behaved perfectly until around the time I upgraded to 7.0.6, when it starting making me choose between Mute or Landscape mode.
If my iPad side switch is set to control the Mute option in settings, when I try to play audio the iPad is always silent. If I use the volume rocker the indicator shows the volume changeable from minimum to maximum, but no sound occurs when playing audio of any kind.
I can swap the side switch lock between active and disabled, and the mute indicator comes and goes, but still no audio in either side switch state.
If I set the side switch in Settings to control the Lock Rotation instead and restart the iPad, I don't have any problems with audio, but my iPad mini becomes locked in landscape mode.
If I swap the side switch lock between active and disabled, the locked and unlocked orientation icons appear, but the screen stays locked in landscape.
I don't want to reset the iPad as I have apps on there that are since discontinued, so are there any other options/fixes available? Or Is anyone else experiencing this bug?I didn't say a restore, which reloads a fresh copy of iOS. I said a reset which does not remove any data or apps. It's equivalent to power cycling your iPad - a reboot.
That said, you should always download copies of your apps to a computer and keep them for just the situation you described. -
Managed Standby Recovery not active
Dear All,
My database version is:
SQL> select banner from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
OS:RedHat 5.5
My current configuration is:
We have two node RAC primary database and a local standby database.
And TWO NODE RAC DR (REMOTE)STANDBY DATABASE
while checking (REMOTE WHICH IS TWO NODE RAC)dr synchronization we found archive since yesterday has not been applied.
But local dr is fully sinc with the primary database.
When i have executed 'ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL' it says
SQL> alter database recover managed standby database cancel;
alter database recover managed standby database cancel
ERROR at line 1:
ORA-16136: Managed Standby Recovery not active
I manually copied the archive log which where missing in the remote standby database and then register those archive log.
after that when i manually tried to recover the standby database it has given me following error.
sql>recover automatic standby database;
ORA-00283: recovery session canceled due to errors
ORA-01124: cannot recover data file 1 - file is in use or recovery
ORA-01110:data file 1: '/database/ctmis/system01.dbf'
please please help me to resolve the issue.
Thanks and Regards
Monoj Dasaccording to my understand
Node1,Node2 is having node1-standby node2-standby in RAC environment right?
on which node logs ur trying to apply on which node standby? (node1 ==>node1-standby or node2 ==>node2-standby)
check it...hope it will work or not sure :)
standby side...
rman target /
RMAN>crosscheck archivelog all
then try to recover..will see ..
if not
check with support.oracle.com through SR. -
Home Move & BT Vision Not Activated Properly - nea...
Hello,
Apologies if there is an answer to this somewhere but I did a search and couldn't find anything relevant... also apologies that this is quite long but the whole saga has been going on for ages so there's a lot to write.
I hope someone is able to advise as to how I can finally get this sorted out though before I have a breakdown!
- On 15/11/11 I contacted BT via the website to inform them of my home move from A to B and that I wanted to stop service at A on 21/11/11 and to start at B on the same date or asap thereafter
- I received a standard email reply stating that service would start at B for phone, broadband & BT Vision 22/11/11
- I then received a call (not sure of exact date) to say that there unfortunately would be a delay to Broadband & Vision
- Phone service activated at B (new address) 23/11/11
- Broadband activated at B 26/11/11
- BT Vision activated 03/12/11
- However I then noticed that Replay & On Demand (which had been part of my package) were still not activated (i.e. they were still PAYG)... I gave it a few days
- I called BT in the afternoon of 08/12. I spoke to a few different people (Indian call centre I believe) who didn’t have a clue and was then put through to a helpful chap (I think in UK)... we went through everything and although he couldn’t see what the problem had been he did switch me to a new package: dual package (phone & broadband: and switching from Broadband Option 2 to Option1) + BT Vision Unlimited (i.e. not also including Film Club) + unlimited weekend & eve calls (previously had just been weekend).
- He also said that they would knock a few quid off for the first 2 months because of the hassle and that it would be a new 12 month term
- HOWEVER he couldn’t have it set up immediately as one of the first people I’d spoken to before being put through to him had logged it as a fault and apparently the new order can’t be put through and activated until the fault has been cleared
- He informed me the new activation date would be 15/12/11
- The phone activation happened 15/12/11 (i.e. switching from unlimited weekend calls to evening + weekend)
- As of 22/12 BT Vision had still not been activated properly as I still didn’t have On Demand, Reply & Film Club... I was told that the order was still shown as open. There was an issue and the guy I spoke to said he would try and get to the bottom of it, sort it out and would call me back the following evening
- A couple of hours later I received an email to say that my order was cancelled (?!)
- Now it is possible that the person I spoke to tried to call me on 23/12/11 but I was out
- 24/12/11 (I think, it may have been the evening of 23rd) I sent an email via bt.com asking what was going on
- I then received a call 29/12/11 to say that the old order needed to be cancelled (I thought that it had been already, according to the email received on 22nd) & that then a new order would have to be put through. This would take at least 24hrs and that I should then be notified in 48hrs to let me know when the new activation date would be. Apparently there has been an “over-capacity” issue....
- On 30/12/11 the order status online showed that an order had been put through on 22/12/11 but the activation dates were still showing as 15/12/11.
- 02/01/12 I still had not been notified as to when the new activation date would be (48 hours would have been 31/12/11 PM)
03/01/12 - someone from BT called and asked if my phone & broadband were OK. I said yes but that I’d not been having a problem with them anyway, it was BT Vision. He said that was a separate department and that I would have to speak to someone there. OK, fine I replied but I’d never had a prob with the phone & broadband anyway (i.e. so why the call in the first place as I’d not made an issue of that)... he just repeated that I would need to spk to someone at BT Vision. Fair enough.
- 08/01/12: I checked on bt.com and now my account was showing as having no outstanding orders at all.
- Again I checked BT Vision and On Demand, Replay and Film Club had still not been activated. Plus my online account still seemed to be showing that I had Broadband Option 2 (not 1) as well.
- I sent another email via bt.com 08/01/12. Pretty much detailing the whole timeline as I have here - and obviously asking that someone *please* let me know what was going on.
- I received a call today (09/01/12) from someone at BT asking if it was all now OK as apparently it should be. I said that certainly it hadn’t been the last time I checked (last night).
- He said that he could log it as a a fault but I said I was loathe to do that without double checking as that would delay it further (see what happened when it was previously logged as a fault when apparently it shouldn’t have been) and this had been going on since November as it was.
- I said he would check tonight and turn everything off & on again etc and see if that would make a difference.
- He then said that he would just check what the system said was active... unfortunately he then cut me off and didn’t call back
- This evening (09/01/12) I checked BT Vision when I got home but still no On Demand, Reply & Film Club (well they are there, but wanting to charge me).
- I’ve restarted the hub and also the Vision Box but it hasn’t made a difference
Does anyone have any ideas what I should do next? Clearly emails and calls aren't doing me any good at all and I'm getting incredibly frustrated...
All advice very gratefully received!
Thanks,
LKHi LondonKitchener
I am really sorry that you have had so much difficulty getting your Vision working properly. Occasionally we can have problems with how the order is built and it sounds like certain essential elements have been left out of activation, it should just be a case of getting this reported and applied but sometimes it can take a while to get everything figured out and set up correctly.
I'll happy to help you out with this and make sure you know what's happening each step of the way. We can act as a point of contact for you which should make things a bit easier.
Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
My ITUNES CARD NOT ACTIVATED how to solve
my itunes card is not activated plz help
Try taking back to the store that you bought it from and ask them to activate it properly. If you can't, or won't do so, then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
FBZP - Form RFFOAVIS_FPAYM is not defined or not active
Hi SAP Experts,
I need your help please...
In FBZP when i try to assign form RFFOAVIS_FPAYM from Co Code 1000 to Co Code 2000 i am getting error message as
Form RFFOAVIS_FPAYM is not defined or not active.
Co Code 1000 is of US and in Pay Method country for US PMW is used with format as ACH, while Co code 2000 is of country Canada...please tell me how to assign itHi SAP Gurus,
As suggested by Ravi i check in SE71 but the form is not available in Language EN. But still for the other Co Codes this form is working perfectly fine in Production.
Is there some configuartion remaining from my side. As i was working with abaper they said that some config is missing.
Kindly advice how i can assign this form to my new co code -
I purchased an iTunes card, I have entered to code four times correctly, it then told me the card was not activated correctly. What do I do?
If it's saying that it hasn't been activated properly then are you able to take it back to the store that you bought it from and ask them to activate it properly ? If not then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
Form name PYXXFO_SAP_TIM_99_0001 not active for form SAP_TIM_99_0001
Hi Experts,
I am on ERP2004 SP17 EP6.0 SP20. I am trying to implemet Time Statement application. I am getting the error
"Form name PYXXFO_SAP_TIM_99_0001 not active for form SAP_TIM_99_0001" on portal when trying to access the time statement.
Where can I activate the relevant form on R/3 side? I appreciate your help.Hi Barin,
Thanks for replying to me. I activated the form SAP_TIM_99_0001 in hrforms.
Now I am seeing the error <b>"Unable to generate form PYXXFO_SAP_TIM_99_0001</b>
But I do not see this form in hrforms? where can i find this form?
regards! -
Problem with downloading certain presentations,indicatior is not active
Dear Suppot Team.
I have problem with downloading certain presentations, to see the problem please go to www.oriflame.co.uk > login> use my id number 3086445> password> 290883> click on opportunity presentation> and try to download the presentation, indicatior is not active, I tried in safari and it's working fine. Please have a look and thank you for your effort. Could you please write to me back at [email protected]?
Kind regards. AlexHi,
you have posted the records in the R/3 side.
But the V3 jobs have to run for the records to be available for the delta in RSA7.
Once your postings are done.The V3 jobs are scheduled,mostly it runs on an hourly basis.
This is what loads these new records to RSA7..
Wait for a while until the V3 jobs run.then Check RSA7 if there are any LUWs then run your delta ..it should pick records.
Regards,
Savitha -
Java is not active in the application server
Hi Experts
We recently installed CRM 5.0. Everything seems to have installed without any issues.
However, we are having a few issues the Java Virtual Machine (VMC).
When trying to access the VMC through ABAP side of CRM (SM53), it gives and error message that "Java is not active in the application server".
Eventhough everything seems to have been installed.
Any ideas on how to activate java.
Any help would be really appreciated.
Thanks
Imran KhanHi Daniele:
There are indeed only 3 parameter additions
vmcj/enable = on
vmcj/option/ps = 512M
vmcj/option/maxJavaHeap = 200M
The 4th one is just explanation for calculating sizes.
My VMC is active with only the above three settings.
Also make sure that the SP level for both the JAVA components and ABAP components is the same. i.e. they are both running on the latest version. The latest update was released in Late April.
If the SPs are from differnt releases, the VMC will not work.
Also, go into the server and have a look at the parameter file to make sure that settings are actually there. i have found out that settings in RZ10 and the real parameter settings can be different. Just make sure that the settings you want the system to take are indeed in the real parameter file.
I am not sure what else you can do...but rest assured that the thing works with the above mentioned settings.
Imran -
UCCE SIP Dialer not active and PIM neither
Dear Networkers,
We have UCCE 8.5(4) installed.
We have configured and installed aSIP dialer. The issue is that the SIP dialer is not working and the PIM is not active.
From the Dialer process output I can see the following after enabeling the EMSDisplayToScreen :
18:02:48 Trace: Trying to connect to server: 17.20.10.80 on port: 44027
18:02:48 Trace: socket open on Server=17.20.10.80 port=44027
18:03:09 Trace: Error calling Connect(): 10060
18:03:09 Trace: Could not connect to either CTI Server A or CTI Server B
18:03:09 Trace: CTI Server configuration:
18:03:09 Trace: CTI Server A: 17.20.10.80, Port: 44027
18:03:09 Trace: CTI Server B: 17.20.10.80, port: 44027
From the MR PIM process output I can see the following after enabeling the EMSDisplayToScreen :
18:03:40 ADDED\UPDATED 0 PeripheralTargets on Peripheral 5008.
18:03:40 ADDED\UPDATED 0 PeripheralMonitors on Peripheral 5008.
18:03:40 ADDED\UPDATED 2 MediaRoutingDomain on Peripheral 5008.
18:03:40 Trace: Transport: appServerHostName1 = kbprcrmipc01a01
18:03:40 Trace: Transport: appTcpServiceName1 = 38003
18:03:40 Trace: Transport: appServerHostName2 =
18:03:40 Trace: Transport: appTcpServiceName2 =
18:03:40 Peripheral 5008 sending OPC PIM_OK_ACK acknowledgment for command PIM_CONFIGURE_REQ (TransID=0).
18:03:40 Attempting to connect to MR application at IP address 172.20.10.80 port 38003.
18:03:50 Attempting to connect to MR application at IP address 172.20.10.80 port 38003.
18:04:02 Attempting to connect to MR application at IP address 172.20.10.80 port 38003.
18:04:11 ProcessPIMSetIdleReq: Peripheral 5008 going idle.
18:04:14 Peripheral 5008 sending OPC PIM_OK_ACK acknowledgment for command PIM_SET_IDLE_REQ (TransID=33).
18:05:11 ProcessPIMSetIdleReq: Peripheral 5008 going idle.
18:05:11 Peripheral 5008 sending OPC PIM_OK_ACK acknowledgment for command PIM_SET_IDLE_REQ (TransID=34).
For the Dialer process, I can see that the dialer cannot connect the CTI Server on the port 44027, but the CTISVR is active and working fine (CTIOS also).
For the PIM process, I can see that it couldn't connect to the dialer on the port 38003, but the configuration is correct.
Any help please ?
Thanks in advance.Hi haouaswajih,
After referring to the below link,
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/outbound_option/outboundoption9_0/installation/guide/UCCE_BK_O4A87BBC_00_outbound-option-guide-for-cisco_chapter_0100.html
Step 10
On the last Outbound Option Dialer Properties dialog box , specify the following information:
Outbound Option server: The host name or IP address of the Outbound Option server. This server is typically the same machine where the Outbound Option Campaign Manager is located.
CTI server A: The host name or IP Address of the machine that has side A of CTI server installed.
CTI server port A: The port number the dialer uses to interface with CTI server side A. The default is 42027.
CTI server B: For duplexed installations, the host name or IP Address of the machine that has side A of CTI server installed.
CTI server port B: For duplexed installations, the port number the dialer uses to interface with CTI server side B. The default is 43027.
Heart beat: How often the dialer checks its connection to the CTI server, in milliseconds. The default value of 500 is acceptable.
Media routing port: The port number the dialer uses to interface with the Media Routing PIM on the Media Routing PG. The default is 3800 to 3801.
Call Manager TFTP server: The host name or IP address of the CallManager TFTP server. This server is the same machine used for the CallManager publisher.
Could you please crosscheck the CTI ports being used\pointed here in your setup.
Hope this helps,
Anand
Please rate helpful posts !!
Maybe you are looking for
-
Hi Friends, I did batch split into 2 batches for a line item in delivery. Now in billing if one of my client asked to display this line item without batches i.e., in single line item total quantity delivered, what should I do the settings. And if ano
-
ColdFusion Builder 3 Mac Eclipse Plugin
I have been trying numerous ways to install CFBuilder 3 Trial into Eclipse 4.2.2 on Mac (Yosemite) and just cannot get CFBuilder to load the CF Perspective. I have tried in various Eclipse versions, and in multiple orders including just installing CF
-
Client contents showing difference
Hi Gurus, I have two clients 000,800 but my problem is Capital work in progress number ranges groups one client showing another client not showing the same groups. same in profit center accounting number ranges groups one client showing but another
-
Office 365 error 259-4 when installing newer Project on top of older ProPlus
Hello, I am encountering a problem in the following circumstances: - I install Office 365 ProPlus using version 15.0.4649.1003 - Then I try to install Project from Office 365, but using the newer version 15.0.4659.1001 The setup fails with error 259-
-
I cannot open Creative Cloud as I receive a message that Creative Cloud is not responding. This occurred right after PSCS6 update was installed.