Side-by-side CR for VS2010 and CR for VS2013 Community

I am not sure I fully understand the way CR for VS is installed on the development system.  I might be starting a new project with someone that is currently running VB 2013 Community and I am currently using VB2010 with CR 13.0.9.1312.
From my research, it looks like the new VS 2013 Community Edition can be installed and support the use of the latest Crystal SDK.
Can I continue to have my VB2010 projects work with CR13.0.9.1312, and program with VB2013 on CR 13.0.13.1597 on the same development computer?  (I use both a Win7 32 bit computer and Win8.1 64 bit notebook developing 32bit Windows forms apps.)
Will they work ok side-by-side or do I have to update all my other projects to the latest CR version as well?
Also, I believe this to be true but I am assuming the latest version will work with VB2010 but if necessary, how do I install the latest release to make sure it works in both versions of VB properly?
Do I uninstall CR 13.0.9.1312 then install VS2013 then CR 13.0.13.1597?  If not what order of events should I follow?
TIA, rasinc

Thanks Dell, that was quick.
So if I go forward with this, I should install VS 2013, then install CR13.0.13..... so that it will install into both versions.
Then I should look at my other VS2010 programs and make sure they all still work properly.  Is this correct?

Similar Messages

  • My ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

    my ipad 2 touchscreen doesn't work on most of the screen it got cracks all down the left side of my ipad and it has been working fine for a year after cracking but just woke up and touchscreen doesnt work i have tried to reboot it but still nothing

    It might be time to contact Apple for an out of warranty repair (actually replacement)
    See here: http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
    Replacement for any model iPad 2 is $249

  • Someone,placed a window for Reading list on the left hand side of my monitor and I want it off. Any tips?

    Someone,placed a window for Reading list on the left hand side of my monitor and I want to remove it. How do I do it?

    Hello,
    That's a feature of Safari...
    To open and close your Reading List, click the eyeglasses button.   
    http://support.apple.com/kb/PH5074

  • How to get client side validation for double range and double field in stru

    Hi,
    I have achieved client side validation by using <html:javascript formName=""/>
    All fields shows client side validation but double field and double range field is not shows client side validation but shows server side validation.
    I am using Liferay jboss server.
    Please tell me a way to achieve client side validation for double field and double range.
    Thanks & Regards,
    Brijesh Baser

    I see in the query component there is a QueryListener and a QueryOperationListener. Have you tried letting Jdeveloper create methods for these in some backing bean, and putting in some debug code to see when these methods run? I would think one of them could very well be used to validate the input, somehow; if the input were bad you could just raise an exception and pass your error message, I bet.
    If not...
    I am pretty sure that there is an appendix in the Fusion Developer's Guide for Forms developers turned to Java...you might look at what it says for post query. I know in the 10.1.3.0 equivalent documentation, they gave reference to a method in the ViewObject which fired for each record after a query was run. You could definitely intercept this query return from there. In fact doing something like this may be something like what Frank N. was intending when he mentioned ViewObjects "validation". Not sure though. I am still learning what new features there are in 11g adf/bc.
    Good luck.

  • I bought a ipod 5th gen 32gig off a road side peddler for $175. It was working when I bought it. I wonted to remove his music and stuff off of it so I restored it with itunes and now it wont let me activate it. I do not have his info how can i activate it

    I bought a ipod 5th gen 32gig off a road side peddler for $175. It was working when I bought it. I wonted to remove his music and stuff off of it so I restored it with itunes and now it wont let me activate it. I do not have his info and I do not know how to get in touch with him I have had third gen ipods and never had any problums like this before Help!!!

    Either get the Apple ID and password from him to activate the iPod
    iCloud: Find My iPhone Activation Lock in iOS 7
    or have him remote remove the device from his account
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    or return it for a refund.
    Otherwise you have an expensive, thin brick

  • I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

    I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

    Purchase and use Paragon Camp Tune

  • My kid dropped my iPad 2 and the volume control on the side got jammed in and now everytime my ipad is on the volume icon in the middle of the screen will not go away.  I can not move the switch on the side, it is jammed, is there a way to fix it?

    My kids dropped my iPad and the volume control on the side got jammed in and it will not move, how can I fix this?  Can it be pulled out to unstuck it.  The glass got chipped right next to it, but it is not that noticible.  Everything else works on the iPad, but the other problem is that I am past my 90 day warrenty and it will cost me $265.00 to have Apple fix it.  Is there anyway I can save my iPad?

    Your warranty is actually one year - the 90-days is only for free telephone support - but the warranty would not cover damage due to the iPad being dropped. I doubt there's anything you can do to fix the rocker, so you'll probably need to pay to get the iPad exchanged (by Apple) or repaired (by a third party repair service).
    Regards.

  • Error in load master data from flat file to infocube "No SID found for val"

    Hi gurus
    while i m loding data from ffile to infocube. getting error message "No SID found for value 'HOT ' of characteristic 0UNIT" for material name field .
    in flat file one fileld having lower carrecter so i have defined formula for upper case in transfer rule.
    after scheduleing message is "data was requested". but in monitor-> detail-> request, extraction status is green and transfer , processing ststus are red.
    overall status is red.

    It appears your transfer structure and source file are not mapped correctly. Make sure your source file is in the correct format. TRy the "preview" function to make sure.
    Also, is the file and your log on language the same? For instance is the file from a GErman user but you are logged in in English? You will see errors like that when you use ST (Stuck = Pieces) instead of PC (Peices in English)
    To test a bad mapping, hard code the Unit to something to make sure...(to PC for instance).
    Also, the error message you are getting is because of transfer structure, please re-activate it. IF it persists, try to skip the PSA and go straight to the data target.
    Message was edited by: Steve Wilson
    Message was edited by: Steve Wilson

  • No SID found for value 'GB' of characteristic 0CURRENCY

    Dear Experts,
    When i do the BW data load. I got the error. Seems the error related to no master data is available for SID creation. I got the below error message. Please help me to resolve. Points will be awarded. Your help is much appreciated. Thanks.
    No SID found for value 'GB' of characteristic 0CURRENCY
    Message no. BRAIN070
    Diagnosis
    Characteristic value GB does not exist in the master data table of characteristic 0CURRENCY. Therefore, this value could not be transformed into the internal SID.
    Procedure
    Check whether the value is correct or not. If it is correct, you need to generate the associated master data. Note: For characteristics 0FISCVARNT, 0FISCPER and 0FISCYEAR, there must be a corresponding fiscal year variant (see table T009). In addition, there must be units in table The value for 0FISCPER must be valid according to the fiscal year variants. This means that only the periods 0 to (no. of normal periods + special periods) are allowed. If the fiscal year variant is year-dependent, then only the periods defined for the corresponding year are valid. You can make these settings in Customizing in theactivity Maintain Fiscal Year Variant. T006 and currencies in table TCURC. Also note that the units must be of
    Units that refer to 0UNIT must be available in table T006, and currencies that refer to 0CURRENCY in table TCURC. Note that the units must be available in internal format. Owing to the presence of a conversion exit in field MSEHI of table T006, you are only able to see the internal format if you deactivate this exit. ( Settings> User Parameters> Tab DataBrowser > Consider Conversion exit must not be set). Also take a look at note no. 619987.
    Regards,
    RR.

    Hi Reddy/Ajeet,
    Thanks for your prompt reply.
    I followed the steps:
    Goto to RSA1-> Source systems--> Transfer Globle settings and Select Currencie, Ubits and Fiscal year, Factor...etc and select Update
    Just would like to check with you, currently we are extracting data from SRM & SAP R/3 system.
    I got the error while doing the data loading for SRM system. I did the above steps for both systems.
    Is that anything else, i need to do....
    Currently i am going to do the master data load, then i will do the transaction data & check with the currency error.
    could you please elaborate the steps
    1)How to check 0currency is getting updated in our system.
    2) how to verify custom z program used
    3) How to  maintain the currency manually in BW.
    Advance. Thanks.
    Regards,
    RR

  • No SID found for value '000 ' of characteristic 0UNIT

    Hi All,
    iam loading to ODS from flat file and iam getting the error"No SID found for value '000 ' of characteristic 0UNIT ". to be more clear the load is taking place and the activation of ods is not taking place .
    we added a new key figure to ods and when we add the data of the new field to the flat file we are getting this error .  but when we load with the files which does not contain data to the new key figure its successfull .
    can some one guide me how to resolve it.
    regards,
    jay

    Hi All,
    the data which i entered for the new key figure is 000 . is it because of it ? so , if i enter some value instead of 000 i may not get this error ....... am i rite? so checking the values means is it for the new key figure or there is an info object 0unit also in my case ?
    kindly explain clearly with an example
    regards,
    jay

  • My iphone 4s screen turned freaked out before my eyes, changing all different colours, now it is blue and black along the right side with horizontal lines, and is flickering. I DIDN'T DROP IT.

    I was just sitting on the couch scrolling through facebook, I closed out of that and went to open safari, when it spazzed out, for a few mintutes it looked like LSD vision, it was all different colours and flickering the whole time. I turned it off and on again, and plugged it into my computer and now the right side is nearly completely blue, and bleeds to the left side with horizontal lines, and it is still flickering. I just finished paying the **** thing off. I thought I'd get another year out of it. I have taken exemplary care of it and it hasn't left the case since the day I bought it. I haven't dropped it, there was no warning for the screen to start doing this. So my question is, is there an easy fix (I am about to restore and update it, and I already played around with the screen brightness), and if not, am I going to have to pay for the screen to be replaced, because I don't have that kind money.

    Probably sounded funnier in your head.

  • No SID found for value '0CURR' of characteristic 0CURRENCY

    Hello dear friends
    I am getting this above error message 'No SID found for value '0CURR' of characteristic 0CURRENCY' when i am trying to load data in my cube from an ODS.
    For the Keyfigure that is using the currency  i had to write the following routine in the Update Rule fo rthe Keyfigure:
    DATA: l_MZPLP1 LIKE /BIC/PMMAT_PLNT-/BIC/MZPLP1,
    l_MZPLP2 LIKE /BIC/PMMAT_PLNT-/BIC/MZPLP2.
    SELECT SINGLE /BIC/MZPLP1
    INTO l_MZPLP1
    FROM /BIC/PMMAT_PLNT
    WHERE
    /BIC/Mplant = COMM_STRUCTURE-/bic/Mplant
    AND
    /bic/mmat_plnt = COMM_STRUCTURE-/BIC/MMATERIAL.
    IF sy-subrc = 0.
    RESULT = l_MZPLP1.
    ENDIF.
    result value of the unit
      UNIT = '0CURRENCY' .
    Also i checked the 'UNIT CALCULATION IN THE ROUTINE' box.
    And under UNIT it does show 'Target Unit' - 'Currency Key'.
    Please advise what should i do to resolve this.

    hi Krrish,
    the error message normally indicates the value is not exist in table currency/unit
    Note 619987 - No SID for the 0UNIT or 0CURRENCY characteristic
    you can try transfer unit and currency from r/3, rsa1-> source system->right click 'transfer global setting', mark 'currency' and 'unit of measurement' (fiscal year and factory calendar also) and option 'update tables' and execute.
    you need to schedule this update, better daily before the transaction data load, to do this, from same screen go to menu program and schedule in background.
    hope this helps.
    Solution
    If you do not find the value in the T006 or TCURC table, you must insert it. Note that the initial value is always allowed.
    If you nevertheless receive this error message for the initial value, this means that there is an inconsistency in the SID table for the 0UNIT or 0CURRENCY characteristic. You can eliminate this inconsistency by calling the RSDMD_INITIAL_LINE_INSERT function module with I_CHABASNM = 0UNIT or 0CURRENCY.
    If units are loaded in the external format, you must either convert these into the internal format in the transfer or update rules or change the extractor/file.The CONVERSION_EXIT_CUNIT_INPUT function module converts the external value of a unit into the internal value.

  • How to Disable client side validation for the message text input

    Hi,
    I have scenario where i need to by pass the client side validation for a message text input
    Scenario is
    I have a message text input field(say XYZ), i set the max length for the item as 20
    Now when im trying to enter the greek characters into it, it is allowing me to enter till 20 characters
    But when i try to submit the form ..my client side validation is firing..
    The Error says the XYZ is too long
    The problem is, in greek each character takes two bytes.(In english it is only 1).While entering the content it allowing 20 characters and when validating it is checking for bytes(if we enter in greek the length will be 40 bytes not 20)
    I cannot increase the max length .coz i have restrict the character length to 20 only.(english or Greek).
    Please help me in this regard.
    Regards
    Sandeep.

    Thanks for the information.But we dont have any option either declaratively or programatically to disable the client side validation for the message text input..I referred java docs ..i dint find any method which does..
    Correct me if im wrong

  • Red error: No SID found for value 'BTL ' of characteristic 0BASE_UOM

    Loading 0FI_GL_4 data from R3, get some red erros, the 1st error is:
    No SID found for value 'BTL ' of characteristic 0BASE_UOM
    Check the above red error details:     
    Diagnosis
         Characteristic value BTL does not exist in the master data table of
         characteristic 0BASE_UOM . Therefore, this value could not be
         transformed into the internal SID.
    System response
    Procedure
         Check whether the value is correct or not. If it is correct, you need to
         generate the associated master data. Note: For characteristics
         0FISCVARNT , 0FISCPER and 0FISCYEAR, there must be a corresponding
         fiscal year variant (see table T009). In addition, there must be units
         in table The value for 0FISCPER must be valid according to the fiscal
         year variants. This means that only the periods 0 to (no. of normal
         periods + special periods) are allowed. If the fiscal year variant is
         year-dependent, then only the periods defined for the corresponding year
         are valid. You can make these settings in Customizing in the activity
         Maintain Fiscal Year Variant . T006 and currencies in table TCURC. Also
         note that the units must be of
         Units that refer to  0UNIT  must be available in table T006, and
         currencies that refer to  0CURRENCY  in table TCURC. Note that the units
         must be available in internal format. Owing to the presence of a
         conversion exit in field MSEHI of table T006, you are only able to see
         the internal format if you deactivate this exit. ( Settings > User
         Parameters > Tab  DataBrowser > Consider Conversion exit  must not be
         set). Also take a look at note no. 619987.
    Procedure for System Administration
    Any idea to resolve the loading problem?
    Thanks

    Kevin,
       what ever it may be the source system, if T006 Table contains BTL, that sloves your problem.
    try load data once again. please update the thread after loading.
    all the best.
    Regards,
    Nagesh Ganisetti.

  • No SID found for value 'PC ' of characteristic 0UNIT

    HI,
    I am extracting Profit analysis data from R/3 to BW3.5.
    In this i am getting one error.
    No SID found for value 'PC ' of characteristic 0UNIT
    How can i resolve this.
    I already did the following step.
    rsa1->source system->r/3 source system, right click 'transfer global settings',
    in next screen, make sure 'unit...' checkbox is marked.
    and execute.
    But the status is same(error)
    Please help me..
    Thanks

    No SID found for value 'PC ' of characteristic 0UNIT
    Hi,
      I am not getting the right answer for this .The issue is very Urgent
    I am extracting PP data from R/3 to BW3.5.
    In this i am getting one error.
    No SID found for value 'PC ' of characteristic 0BASE_UOM
    How can i resolve this.
    I already did the following step.
    rsa1->source system->r/3 source system, right click 'transfer global settings',
    in next screen, make sure 'unit...' checkbox is marked.
    and execute.
    But the status is same(error)
    Please help me..
    Thanks,
    Chinna

Maybe you are looking for