Side container not the right size

My left side container does not go all the way to the bottom of the page like the right side one. Any suggestions would be greatly appreciated. url is www.cincywomensexpo.com.

It looks like you want to apply faux columns to the page. Here is a quick tutorial.
http://www.paulgdesigns.com/faux-columns.php
Gary

Similar Messages

CS4 Save For Web not the right size

I'm having problems with Illustrator images when I use the Save For Web. The image size always comes out the same size as my artboard. In other words I set up a new document to be letter size, create my drawing within that document. My drawing is only about 300 px by 150 px. When I Save for Web my image is the same size as the document or artboard not my drawing. Is this something new in CS4? Do I have a preference set incorrectly? The only way I have found to get rid of the background is to adjust the size of the artboard manually. Is there a way to adjust the artboard to fit my drawing automatically, like cropping to an object in Photoshop?

CS,
Basically the same issue was up, and answered, recently here:
http://forums.adobe.com/message/2667045

My screen is not the right size on ipad2

I can see everything on the screen except about a quarter of an inch around the sides. I have tried double tapping to enlarge, then again to resize but that does no good. Have also tried shutting down and restarting but that also does no good. Has worked great for a year until the kids were using it last night.

If by the nano software, you mean the installer/updater, you can always download the most recent version of that (and iTunes) from Apple.

How do I get my Mac Book Pro desk top back to the right size?

My son was using my Mac Book Pro this morning and managed to enlarge both the desk top and any browser I use - Safari, Firefox etc. I am unable to get them back to the right size and have to keep shifting across to see what files I have etc. Can anyone give me advice on how to put it back to normal. I have tried looking at 'view options' and also in trackpad, mouse and keyboard in preferences but to no avail. Note that the files on the desk top are not smaller or bigger - it is the actual desktop which has increased in size and is no longer contained within the frame of the screen. Would be grateful for any help and thank you.

Did you try CONTROL and two finger drag on the trackpad?
Ciao.

Elements 8 when in file location view the thumbnail is not the right photo

When I click on a file folder location the thumbnail that opens in not the right photos for that file folder. I have run catalog repair and optomized the catalog. I don't know much about the database but think it must be messedup. I need to move my photo's to a external hard drive as my laptop hard drive is full. This is when I first saw this problem. I have moved only 8 photos. I have a about 4500 photos and did not want to have to move them one at a time. Also I store everything by date. I have elements 8 and primiere 8 with windows 7

Mona-R wrote:
I am not sure how to do this but I do have more than one EHD that I could use. I can backup to one hard drive and restore to another. Will this move the catalog file from my internal hard drive to the EHD? If so what does that do to my internal hard drive that has the program files orginal installed on them. Guess what I need is a step by step instructions as I have not done this before and don't want to loss everything but could reinsall if I have to. If it come to that would like to have my photos on the EHD and upgrade my program to PSE 10. or maybe move to lightroom if that is a better program. I am at a stand still as my internal hard drive can't hold any more.
First step is to create a backup on one of your external hard disks. This will be useful anyway, should you upgrade computer or PSE version later.
- create a new folder in the external disk.
- start the backup from the organizer file menu, choose a backup name and select the destination drive and the folder you created. Note the size of the backup to be sure you have enough space on the external disk. It's good to have twice the necessary space.
Wait for the message telling the backup is finished ; don't close the organizer too soon, this message does not appear immediately.
You can check if the backup is complete by looking into the destination folder. It should contain a backup.tly file.
This backup can be used to restore your catalog and image files either to the original location or any location on any disk.
Now, you are ready to restore your backup to another external drive.
Same as before, create a new folder with the name you want to give to the new catalog.
Run the menu restore and choose 'custom location'
The restore will create a new catalog of the name of the folder, and put both the files constituting the catalog and the folder structure of your image files in the folder you created.
As a result, you'll have a new catalog to be found in the catalog manager under 'custom location', which means it is situated on your second external hard drive.
If you want to move the catalog to the default location on your old drive, that's possible from the file menu of the organizer. This will move your catalog, not your image files. It's not necessary, but you can do it.
Nothing will be changed to your old computer, so you'll be able to compare the old and new catalogs and the original and the copies of your images.
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Move_your_photos_1

Can't make text the right size

HI , I'm having a frustrating problem. I'm trying to get the text announcing the levels in my game to be the right size when it's online. It works fine offline, but when I put the swf up online the text looks like it's about 2.4 instead of 24 like I am trying to get it. Here's the code in the start game method:
public function startGame():void
canFire = true;
paperHeadlineIsAdded = false;
NumOfDrops = 0;
pastLevelTwenty = false;
gameIsOver = false;
speedVar = 90;
textRemoved = true;
origNumOfPlanes = 25;
waitForNewLife = false;
newLevel = false;
bombDropSpeed = 3;
NumOfPlanes = origNumOfPlanes;
airplanes = [];
bullets = [];
bombs = [];
// init score
lives = 3;
shotsLeft = 10;
shotsHit = 0;
showGameScore();
levelNum = 1;
iconArray = [];
// create gun
aagun = new AAGun();
aagun.gotoAndStop(57);
addChild(aagun);
// create object arrays
airplanes = new Array();
bullets = new Array();
bombs = new Array();
//text formatting
textFormat = new TextFormat();
textFormat.font=font.fontName;
textFormat.font = "Guadalupe";
textFormat.size = 24;
textFormat.align = "center";
textFormat.color = 0xffffff;
trace(getChildAt(numChildren-1).name);
livesIcons();
// listen for keyboard
stage.addEventListener(KeyboardEvent.KEY_DOWN,keyDownFunction);
stage.addEventListener(KeyboardEvent.KEY_UP,keyUpFunction);
//setup your fireTimer and attach a listener to it.
fireTimer = new Timer(300, 1);
fireTimer.addEventListener(TimerEvent.TIMER, fireTimerHandler, false, 0, true);
// look for collisions
addEventListener(Event.ENTER_FRAME,onEnterFrame);
var siren:Sound = new Siren();
chanD = siren.play(0,800);
// start planes flying
setNextPlane();
and here's the rest of the code that puts the text up in this method:
public function wait():void {
if(levelNum>19){
thisIsTheEnd();
pastLevelTwenty = true;
gameIsOver = true;
newLevel = false;
if(newLevel == true){
if(aagun.aagunGone == false){
textFormat = new TextFormat();
textFormat.font=font.fontName;
textFormat.font = "Guadalupe";
textFormat.size = 24;
textFormat.align = "center";
textFormat.color = 0xffffff;
levelNum ++;
speedVar+= 25;
newLevelText = new TextField();
newLevelText.width = 550;
newLevelText.y = 110;
newLevelText.selectable = false;
newLevelText.defaultTextFormat = textFormat;
newLevelText.embedFonts=true
newLevelText.defaultTextFormat.size = 24;
newLevelText.text = "Level "+ String(levelNum);
waitForNewLife = true;
addChild(newLevelText);
textRemoved = false;
if (gameIsOver != true){
waitTimer = new Timer(5000,1);
waitTimer.addEventListener(TimerEvent.TIMER_COMPLETE, startNewLife);
waitTimer.start();
anyone have an idea why this is happening? Please let me know. Thank you.

I can't upload the html file with the swf because the place I have my game uploaded only asks for an swf file. Do you know why it doesn't work? when I load the html in my browser it works but not just the swf online.

In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

In the slide show view how can you pin the "next" Arrow to the ultimate edge so it is in the same place as the full screen image, it will pin to the left edge but not the right.

Hello,
Please make sure that the next button is pinned to the right side as there in the attached image.
If it is already pinned, you can try removing any embedded HTML code and checking it.
Regards,
Neha

Hi all! What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

Buying more hard drive space is a very valid option, here. Editing takes up lots of room, you should never discount the idea of adding more when you need it.
Another possibility is exporting to MXF OP1a using the AVC-I codec. It's not lossless, but it is Master quality. Plus the file size is a LOT smaller, so it may suit your needs.

My ipad screen won't turn one way when I turn/bump my ipad (will do one side but not the other)

My ipad screen won’t turn one way when I turn/bump my ipad (will do one side but not the other)

Yes there is a rotation lock setting.
First try the switch above the volume rocker. If that doesnt work then double click the home button. It should display a multitasking bar at the bottom of the screen. Slide that to the right and it should display a few settings including screen lock. Make sure that it is unchecked.

ELF file's phentsize not the expected size - ERROR on Linux

I followed all the steps shown on the javasoft/tutorial on JNI and created the following files
ThreadTool.c
~~~~~~~~~~~~~~~~~~
#include <jni.h>
#include "ThreadTool.h"
#include <jvmdi.h>
JNIEXPORT jint JNICALL Java_ThreadTool_getThreadStatus
(JNIEnv *env, jclass clazz, jobject thread)
jint threadStatus;
jint suspendStatus;
jvmdiError error = JVMDI_GetThreadStatus (env, thread, &threadStatus, &suspendStatus);
return (threadStatus);
ThreadTool.h
~~~~~~~~~~
/* DO NOT EDIT THIS FILE - it is machine generated */
#include <jni.h>
/* Header for class ThreadTool */
#ifndef IncludedThreadTool
#define IncludedThreadTool
#ifdef __cplusplus
extern "C" {
#endif
#undef ThreadTool_THREAD_STATUS_UNKNOWN
#define ThreadTool_THREAD_STATUS_UNKNOWN -1L
#undef ThreadTool_THREAD_STATUS_ZOMBIE
#define ThreadTool_THREAD_STATUS_ZOMBIE 0L
#undef ThreadTool_THREAD_STATUS_RUNNING
#define ThreadTool_THREAD_STATUS_RUNNING 1L
#undef ThreadTool_THREAD_STATUS_SLEEPING
#define ThreadTool_THREAD_STATUS_SLEEPING 2L
#undef ThreadTool_THREAD_STATUS_MONITOR
#define ThreadTool_THREAD_STATUS_MONITOR 3L
#undef ThreadTool_THREAD_STATUS_WAIT
#define ThreadTool_THREAD_STATUS_WAIT 4L
#undef ThreadTool_SUSPEND_STATUS_SUSPENDED
#define ThreadTool_SUSPEND_STATUS_SUSPENDED 1L
#undef ThreadTool_SUSPEND_STATUS_BREAK
#define ThreadTool_SUSPEND_STATUS_BREAK 2L
* Class: ThreadTool
* Method: getThreadStatus
* Signature: (Ljava/lang/Thread;)I
JNIEXPORT jint JNICALL Java_ThreadTool_getThreadStatus
(JNIEnv *, jclass, jobject);
#ifdef __cplusplus
#endif
#endif
ThreadTool.java (This is my test class)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
public class ThreadTool {
public static final int THREAD_STATUS_UNKNOWN = -1;
public static final int THREAD_STATUS_ZOMBIE = 0;
public static final int THREAD_STATUS_RUNNING = 1;
public static final int THREAD_STATUS_SLEEPING = 2;
public static final int THREAD_STATUS_MONITOR = 3;
public static final int THREAD_STATUS_WAIT = 4;
public static final int SUSPEND_STATUS_SUSPENDED = 1;
public static final int SUSPEND_STATUS_BREAK = 2;
public static native int getThreadStatus (Thread t);
static {
String currpath = System.getProperty("java.library.path");
String newpath = currpath+":/home/apota/";
System.setProperty("java.library.path", newpath);
System.loadLibrary ("ThreadTool");
public static void main(String[] args) {
Reaper rp = new Reaper(1000, "apota");
Reaper rp1 = new Reaper(2000, "drice");
rp.start();
rp1.start();
while (true) {
System.out.println("Apota thread "+ThreadTool.getThreadStatus(rp));
System.out.println("Drice thread "+ThreadTool.getThreadStatus(rp1));
I use the following command to compile on Linux
gcc -I/usr/local/java/include -I/usr/local/java/include/linux ThreadTool.c -c -o libThreadTool.so
When I run the java program to test it, I get the following
Exception in thread "main" java.lang.UnsatisfiedLinkError: /usr/home/apota/libThreadTool.so: /usr/home/apota/libThreadTool.so: ELF file's phentsize not the expected size
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1419)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1343)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at ThreadTool.<clinit>(ThreadTool.java:21)
Whats going on?
(FYI: I am trying ot get the status of a Thread in Java using the JVMDI C API)

aldus99 wrote:
I use the following command to compile on Linux
gcc -I/usr/local/java/include -I/usr/local/java/include/linux ThreadTool.c -c -o libThreadTool.so
I could be wrong, but it looks like you're invoking gcc all wrong.
1) You're using the -c flag which tells the compiler to only compile, yet you're trying to also link.
2) The last time that I used gcc, I believe you had to use a special flag to tell it that you wanted a shared library... something like -G. (It's not smart like Kai's KCC or Forte).
3) On top of all that, you may have to use a -thread option to make sure you are generating multi-thread safe code.
I suggest taking a second look at the man pages for gcc.
God bless,
-Toby Reyelts

In the Firefox browser, when i click button in ADF page, then popup the OAF page in iframe tag,and then when i click the PPR bean in OAF page, then Firefox browser reload to ADF page. This is not the right response,browser should not reload the ADF pa

In the Firefox browser, when i click button in ADF page, then popup the OAF page in iframe tag,and then when i click the PPR bean in OAF page, then Firefox browser reload to ADF page. This is not the right response,browser should not reload the ADF page.It should stays in OAF page or goto another OAF page. and in other browser such ad IE,We get the right response.

hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]]

Unable to open PNG files "not the right kind of document"

I just noticed this error today when I tried to open several PNG files, some of which I created with Photoshop: "Could not complete your request because it is not the right kind of document".
I'm running Photoshop 9.0.2 on Windows XP Pro. Opening other file types (gif, jpg) works fine. I also noticed that in the save as dialog box that PNG is not a listed file type.

PNG certainly is listed as a file type. I have saved many of them using Save As, many quite recently, using PSCS3; and I just did a couple in PSCS2. Here's the Save As box in PSCS2 with an 8-bit flattened image being saved as PNG:
 
<a href="http://www.pixentral.com/show.php?picture=1PSNAANh2tPbX1MMDLjmQLbHFqm91" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1PSNAANh2tPbX1MMDLjmQLbHFqm91_thumb.png" border="0" />
 And here's the Save As box in CS2 with a 16-bit layered image being saved as PNG:
 
<a href="http://www.pixentral.com/show.php?picture=145dp6qArIbj9k8JG23J1jGojM4imR1" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/145dp6qArIbj9k8JG23J1jGojM4imR1_thumb.png" border="0" />
 
 Both PNG images opened properly. The second one opened as 16-bit, flattened (layers aren't preserved in PNG).
 
 And both of the above images were Saved As PNG from PSCS2, also.

Trying to import video"Could not complete your request because it is not the right kind of document"

When I try to import a video into Photoshop CS6 I get the error: "Could not complete your request because it is not the right kind of document".
I have tried multiple formats with no luck.
I was able to improt it into Photoshop CS5 by dragging and dropping.
Im using Photoshop CS 6 64bit, have tried 32bit with no luck
If I try to drag and drop it, I get this error: could not place the document. Because no parser or file format can open the file.
I have tried opening a .mov, and a .avi file. I thought it might be a codec thing but why can cs5 open it but not cs6?
I noticed other posts with the same issue but they did not get resolved. Any help would be great.
Thanks,
Josh

Vurgano, Powelly 100, and izzysanime,
Has the issue been resloved?
If so, how was it resolved?
I see Yesughei and Powelly are on Win7.
Izzysanime, which Win OS are you using?
Vurgano, what platform/OS are you using?
We are still investigating this issue and would appreciate your assistance.
To rule out problems with the files you have, could you please verify the Photoshop CS5 sample file "CheeziPuffs.mov" will also not work? (program files\adobe\Adobe Photoshop CS5\samples)
Also would you please verify the following:
Virus/security/parental control software hasn't trapped parts of Photoshop, Bridge, Premiere, Lightroom, or any Adobe app using DynamicLinkMediaServer. (Make sure the Adobe apps are added as exceptions if needed.)
Ensure you have the latest version of QuickTime
Close all Adobe applications - wait more than 30 seconds, then launch Photoshop and try to open the file.
- If unsuccessful, view Task Manager/Processes to verify necessary processes started up when importing video (dynamiclinkmanager.exe, dynamiclinkmediaserver.exe and Adobe QT32 Server.exe)
- If unsuccessful, please capture the full error message text.
4. Close all Adobe apps, wait 30 seconds - launch Bridge and try to open the file.
If everyone is on Win 7, it makes me wonder about permissions...
Thanks,
Meredith

Could not complete your request because it is not the right kind of document.

This problem has been re-occuring for a day now, and I honestly have no clue why, I followed the directions. I updated my camera raw plugin, and photoshop to the lastest version. I am trying to open an avi file but it won't open it. About 4 seconds long. Usually I could but yesterday when I tried opening it, it says "Could not complete your request because it is not the right kind of document." Any suggestions because I'm trying to make gifs but I can't because photoshop won't let me open the avi. file.

Thanks, but I have a 64-bit pc, I do have photoshop cs5 64 and 32 bit but it's only avaiblable for 32 bit, i'll use it for now but if anyone has a solution for 64 bit photoshop it'd be great.

***error could not complete because it is not the right kind of document please help!!!***

I recently upgraded my system I am now having an issue when trying to open cs6 files it gives me the the error could not complete because it is not the right kind of document. I tried closing and reopening the program rebooting my computer and updating both my AI and PS as well as trying multiple file types. I have never had this issue before any help would be greatly appreciated.

Hi 11rplace
Please confirm the type or format of file you are trying to open and with which adobe application you are trying it.
Screenshot of the problem would be great help.
Regards,
Sumit Singh

Side container not the right size

Similar Messages

Maybe you are looking for