Sidebar items and some system prefs not synched

does anyone know how to get sidebar items synched? I explicitly synch sidebar.plist (deleted it in Apple's predefined exclusions) and BezelServices.plist - but without success.
Also annoyingly not synching: the system prefs for the keyboard menu, the screen saver prefs and the synch menu item.
Thanks for any idea to solve this.
Message was edited by: lhberg

check your ~/Library sync, remember this is not synced in the background most of these files are in use.
Do you have a login or logout sync rule?

Similar Messages

  • Mail, Skype, Safari and some system preferences not opening

    I wonder if anyone else has had this problem....my mac starts up but seems to skip loading things at the loading screen when it boots - When it gets to the desktop, Skype, mail (mac default program), and Safari do not open when clicked - I tried to go to user accounts in system preferences and that fails to open also - AIM, Fireofx and Transmit (FTP program) all work fine and are able to connect to the interent - It has done this before (months ago) and I ended up having to do a system restore to go back to factory settings - Yesterday it started this again and after 1/2 hour mail just popped open and all was well - It has been on for 4 hours so far and none of those programs are working - Has anyone else had issues like this ? any suggestions? I am using a Power Mac G5 cpu 1.8ghz and 1.25 gb of ram and 10.3.9 for system version - Any help is greatly appreciated
    thanks

    Have you done the basics? Repaired permissions, cleared caches, run cron jobs, booted from DVD and run disk repair etc.?
    It seems that when you did a restore, which I presume is an archive and install, it cleared up then over time whatever you do is corrupting things or the drive is on its last legs. Add a new drive (cheap) , clone the boot drive to it with Super Duper (free) and boot from that for a while.

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

  • I'm running V10.6.8 and the system is not recognizing a San Disc adapter that I plug into the side of the keyboard. This always worked in the past. Whats changed?

    I'm running V10.6.8 and the system is not recognizing the presence of a San Disc (SDHC) adapter that I plug into the left side of the keyboard. This always worked in the past. Whats changed? I can't upload my images to a folder.

    Another item I'd found when getting an SD card for an older camera was the lack of backward support from the SD card if it was too new, while a newer camera can sometimes use an older SD card at a slower read-write speed. There are limits and ceilings on what kind of card works with old/new stuff.
    So I ended up taking a nice SD card back to one store and had to settle on a 'walmart kinda dubious kingston two pack a cure' for the older Panasonic Lumix. Smaller capacity but seems to work OK for the era. I don't trust kingston with macs, but this 10 y/o Lumix seems to not care about that.
    Hopefully you can obtain the correct cards, because some stores only sell parts for their inventory of cameras. And some adapters are limited too.
    Depending on what I'm doing with the card and the camera it goes with, I attach the camera to the computer and not just the card in a reader. That way I can file items inside the camera SD card in a way the camera won't overwrite them. Later when I save everything from the card into an external hard disk drive, all my filed folders of images by date (I created in the SD) appear in order, in the later archive. Easier too, when I burn to DVD or CD media, to create yet another archive away from the computer or the camera.
    Good luck & happy computing!

  • "Bookmarks and history system will not be functional" with corrupt files found by Avast and websites loading slow ONLY in Firefox

    Firefox is the only browser that lets me connect with my microphone. I need to use this feature for an online class. Earlier this evening, the message prompting me to allow or deny the class website permission to use the microphone stopped appearing, and without it the recording won't pick up any sound and I can't record anything.
    I tried exiting and restarting Firefox. I had some extensions in use at the time, in particular Session Manager. The allow/deny message still wouldn't appear, so I restarted my computer.
    Now when I open Firefox I see the "The bookmarks and history system will not be functional" error message. In addition, the browser loads websites extremely slowly; it takes several minutes to load each page or for me to be able to click on anything (the URL bar, the menus, etc) My other browsers (Internet Explorer and Chrome) are running normally and load websites at a normal speed. I tried downloading the latest version of Firefox but it didn't fix anything. I also tried restarting the computer again but that didn't help either.
    I ran my Avast software system check and it turned up that the following files under "C:\Users\(me)\AppData\Roaming\Mozilla\Firefox\Profiles\Irozixj7.default" are "corrupted and unreadable":
    -cookies.sqlite-shm
    -cookies.sqlite-wal
    -localstore.rdf
    -places.sqlite-shm
    There was one more problem on the scan, but it probably isn't relevant: for the file "C:\ProgramData\Microsoft\Windows Defender\Definition Updates\{9A2C6FA7-E04E-4819-B86A-8363A9D1E42A}\mpengine.dll" it says "The system cannot find the path specified." When I attempted to follow the path indicated, one of the folders (I can't remember which) said something along the lines of "You can't access this folder, do you want to permanently allow access to this folder?" I said yes and was able to access the folder.
    I have tried to add the Places Maintenance extension but the speed is too sluggish to download anything. Trying to access any of the menus results in the browser freezing for several minutes then unfreezing but with the menu still unopened. Therefore none of the solutions found here (https://support.mozilla.org/en-US/kb/fix-bookmarks-and-history-will-not-be-functional?esab=a&as=aaq) seem to work.
    My questions are as follows:
    -Is it possible to figure out what caused the problem in the first place?
    -Is there a way for me to fix it without losing my bookmarks and history?
    -How can I avoid this happening again in the future?

    First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder. To quickly access this folder:
    Help > Troubleshooting Information > "Show Folder" button
    Next, keep this folder open, exit Firefox, and try moving the "corrupted and unreadable" files to a different folder. With the exception of localstore.rdf, which stores window positions, toolbar customizations, and other nonessential data, the other files appear to be session-specific files that hopefully are not critical. If you restart Firefox, does it behave more normally?
    If not, try creating a fresh Firefox profile. It will have the Flash plugin, which is the control sites usually use to connects your camera and/or microphone, and other plugins, but otherwise will be a new setup. This article has the steps for starting up in the Profile Manager: [[Use the Profile Manager to create and remove Firefox profiles]].
    If sites work normally in the new profile, you can import your bookmarks from your old profile, as well as copying over other files that don't seem to be causing the problem. Some trial and error might be required to determine that. This article has some tips: [[Recovering important data from an old profile]].
    If the new profile is no better, you can exit Firefox and use the Profile Manager to switch back to your original profile.
    Any improvement?

  • Firefox stops responding and some times dose not start when clicked on alot!

    fire fox 9 stops responding for long periods and some times dose not load when clicked on. Also please note fire fox refuses to load the comments section on Yahoo.com under the news tab. The little wheel on the bottom of the page just spins and spins and never loads this area of the page.
    I think i know why but wonder since i have had issues with fire fox in the past with the whole not responding and load issues.

    Firefox which stops responding after some time is a BIG problem. You're not the only one. The problem seems to be with sites which require Java. The problems I seem to have spotted is this : You visit a web site which needs Java so Java asks Firefox for the amount of memory needed and this is lent to JAVA. However, when you leave that web site, Java is naughty in that it doesn't give back the memory borrowd. Firefox then has to consume a lot of memory to the point that the whole computer system grinds to a halt as you have run out of memory.
    Search in the forums for high memory or RAM and you will see many threads. In fact, when you first install Firefox it will ask if you want to send anonymous data about the memory usage!!

  • I using mozilla firefox so long times but it just get problem today because i can't type in english words but i can type in thai and some buttons is not english but it's other alphbets that i can't read and it's happening with yahoo and friendster and not

    I using mozilla firefox so long times but it just get problem today because i can't type in english words but i can type in thai and some buttons is not english but it's other alphbets that i can't read and it's happening with yahoo and friendster and not sure for other website
    == today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    Same problem with the mouse, but with the mouse I can leave the cursor in place in the text field and move to the keyboard to type. As long as the cursor is in the field it stays editable.
    The problem with the pen is it's in my hand all of the time. I just flip it up under my thumb against my palm to type. So, as soon as I move the pen, the field goes away and I can't type in it. Hoping this is making sense.
    My tablet does have the touch function too, and I just found out I can use my finger to tap in the text field, then type. I guess that'll be my solution since I prefer not to leave a mouse set up on this iMac.
    I'm thinking now that this is just a problem with the pen itself, and nothing to do with iPhoto. So glad to have this figured out! I really like iPhoto '11! So much easier for me, a simple P&S gal, than Aperture 3. I use iPhoto Library Manager too and love it!
    Thanks so much! Debbie

  • I have the "Bookmarks and history system will not be functional" problem and not FireFox will not open at all and my whole computer freezes if I try.

    For a few weeks now, I've been getting the "Bookmarks and history system will not be functional..." message. When I clicked for more information, FireFox would freeze.
    I found a solution about a new places database, but for the past few days I can't get FireFox to open at all. Then my whole system is frozen and I have to turn it off to get it going again, thus losing a lot of unsaved data.
    How can I get FireFox back?

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/The+bookmarks+and+history+system+will+not+be+functional

  • I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie.  Any suggestions to fix?

    Thanks for the reply.  I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long.  After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix.  I strongly suggest not to buy this product.

  • I have recently purchased a CD and some tracks do not play the whole way through. Why?

    I have recently purchased a CD and some tracks do not play the whole way through. Why?

    Assuming you are in a region where you are allowed to redownload your past music purchases, delete the broken tracks from your iTunes library, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
    If you don't see them straight away it may help to close and restart iTunes.
    While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
    If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the report a problem links in your account history, or via Contact Support.
    See also: HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
    tt2

  • The keyboard for my iMac 9, 1 got wet and is not working correctlly. Delete,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I c

    The keyboard for my iMac 9, got wet and is not working correctly. Delete ,return, and some other keys not functioning. In all caps including numerals. I've left it to dry for a few days but still will not work. Computer now in Safe boot mode and I can't login due to all caps and numbers being symbols. Is there anything I can do?

    Buy a replacement keyboard. They're only $50-65 USD.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • HT1199 I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

    I have a desktop mac operating on Mac OSx 10.4.11 and the system does not recognize my iphone and I am unable to upgrade to the newest itunes version. What do I need to do?

    Backup first
    It is always best to have a full bootable backup before you upgrade. If you fail to do this you will be unable to return to this OS if you decide you don't like the new OS. Also there is a slight chance that an install could lose everything on the Mac. The backup must be to an external hard disk. Preferably use Carbon Copy Cloner to make a bootable backup of the whole disk.
    Erase before the install
    Once you have a bootable backup on an external disk it is best to erase the internal disk with the new installer DVD before you install.
    During the install
    Preferably do not import any data or preferences from earlier OSs during the install process as this can reintroduce bugs.
    OS numbers and names
    OS X 10.4.x - Tiger
    OS X 10.5.x - Leopard
    OS X 10.6.x - Snow Leopard
    OS X 10.7.x - Lion
    OS X 10.8.x - Mountain Lion
    More about Macs
    The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
    Upgrade to Leopard
    Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
    Upgrade beyond Leopard
    OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
    Upgrade beyond Snow Leopard
    Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
    Important
    Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages.

  • HT1918 how do you change payment info when there is a pendent payment and you have a new card issued in a new country and the system will not let you do it?

    Can any one help me, I want to change my credit card info. The system will not let me do it, as I have an open purchase and credit cards from one country A and need to change it to creditcard from country B and the system does not allow for it. Any suggestion?

    Contact iTunes Customer Service
    Apple  Support  iTunes Store  Contact Us
    And request assistance with your issue...

  • Error 0xe8000050 while syncing app in my iphone and some app can not install

    I have an iphone 3g with ios 3.1.3 but while i'm installing some app it, i get this error 0xe8000050 while syncing app in my iphone and some app can not install. what's the problem?

    http://support.apple.com/kb/TS3221
    The last release of iOS to support the 3G was 4.2.1, which was released on November 22, 2010.
    iOS 4.3, released on March 11, 2011, did not support the iPhone 3G.

  • I have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

    i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

    Some updates and clarifications:
    1. I already have my 2.4 channel fixed.
    2. Wireless network name is 8 alphanumeric characters; no spaces
    3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
    4. I am running Airport Utility 6.0, Mac OS version 10.7.4
    I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
    An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues?

Maybe you are looking for