Sides and top cut off on my 1080i TV

Watching the election coverage and they have all the graphic data on the sides and at the top. On my 1080i 56" TV the sides and top are partly cut off but if I watch my 720p 24" TV the graphics seem well placed. Anyone know what might be the issue?
BTW the 720p is a LCD and the 1080i is a rear projection.
Thanks

It sounds like your 1080i TV has an unusually large amount of overscan.  Overscan is the part of the screen that your TV cuts off.
Plasmas and LCDs typically have relatively low overscan (between 0% and 6% total cut per dimension), while older CRT projection displays can have closer to 10% overscan.  You should make sure you are in 1080i mode on your 56" TV.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it.

Similar Messages

  • I was working with a chat person about a problem of not being able to connect with iTunes and got cut off

    I was working with a apple chat tec and got cut off. How do I get back to that person?

    You probably need to reply to the thread below.
    https://discussions.apple.com/message/23980460#23980460

  • When i try to watch a video in youtube fullscreen the video gets slow and its cuts off. it happens only in firefox Help me please.

    Hello
    since this morning when i try to watch a video in youtube fullscreen the video gets slow and its cuts off. it happens only in firefox Help me please.if i watch the video in you tube normal size its correct the problem is just in fullscreen mode.

    You can check for problems caused by recent Flash updates and try these:
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Flash_Player_11.3_Protected_Mode_-_Windows

  • HT4623 I have a new iphone5 and about 5 meters wifi signal is reduced to one scale, and finally cut off my connection with routerom.I also  have  iphone 4s and  ipad3 and on those I have full signal everywhere. I installed the latest softwer iso 6.0.2 and

    I have a new iphone5 and  about 5 meters wifi signal is reduced to one scale, and finally cut off my connection with routerom. I also have  iphone 4s and  ipad3 and on those two I have full signal everywhere. I installed the latest softwer iso 6.0.2 and I still have a problem!

    Just get into "General" -> last option is "RESET" -> Opt for "RESET NETWORK SETTINGS"
    Your phone will reeboot in a couple of minutes n then get fine on with full signal on the wifi scale.
    Worked perfect for me. Do try n let me know.
    ATB

  • Running windows 7 64bit. since upgrading to newer versions of itunes,display is not right. window controls and side scroll are cut off. any ideas please.

    i'm running Win 7 64 bit. since upgrading to newer versions of itunes,the display is wrong. window controls and side scroll bar are cut off. any help will be appreciated. I've set itunes compatibility setting to Win 7.

    Hi @prdstudio3 ,
    Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
    Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
    If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
    Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
    Thank you
    George
    I work for HP

  • TS1424 When downloading an album from itunes one song did not download properly and is cut off at the end, how to fix?

    Downloaded John Mayer album bur one song is cut off at the end, how to fix??

    Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that song from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
    If you aren't in a country where you can re-download music or if it re-downloads in the state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link.

  • Urgent: left and right cut off when dragging entire clip to project

    When I right click the clips in the event library and click "Select entire clip" and drag that to the project window, the left and right sides of the video are cut off.  If I select only a single clip and drag that up or a portion of a clip, it looks ok.  I need to get this thing done in an hour or so and I am baffled because there are people in this video that are being cut off!  Help!

    Actually, the more I look at it, the entire frame is cropped, even though I have "Initial Video Placement" set to fit in frame, not crop.  The quality really gets lousy too when dragging them in.  I am baffled why dragging a single clip fits the entire video, but dragging the entire clip series gets cropped...??

  • Ads/images are appearing in wrong iframes, and appear cut-off and distorted)

    Upon refresh or auto-refresh, ads are appearing cut-off or distorted and in the wrong areas of the site, sometimes where our social media buttons are supposed to be. Our advertising clients need to know why this is happening and what measures are being taken to fix this problem.

    Hi
    I am sorry to see you are having problems
    I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
    They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
    They are a UK based BT specialist team who have a good record at getting problems solved
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • I can't print multiple pages from a website using the site's print button or 'file - print' and if I try to save as a PDF, it still only saves the first page and then cuts off.

    I'm using Mac OS X 10.5.8 and Firefox version 3.6.8. When I'm on a website and try to print the info on the site, whether I use the site's own 'print' option, or I go to the Firefox toolbar and try to use 'File->Print', only 1 page prints out - it just cuts off mid-page. If I try to save as a PDF instead, the same thing happens in exactly the same spot - it saves as a 1-page PDF and cuts off in the middle of the page. I've already tried all of the suggestions here https://support.mozilla.com/en-US/kb/Printing+a+web+page?s=printing&as=s and the suggestions here http://kb.mozillazine.org/Problems_printing_web_pages and nothing has worked.
    I appreciate any help!!

    I have the same problem... not being able to print website 'Print' pages. I have read carefully the above link and have followed the reset directions in about:config, but I still cannot print in Firefox. Both Google Chrome and IE work perfectly every time. I have verified that the correct printer is selected and that the margins are in order (0.5 all around happen to be what mine are set for). I have resorted to use the Firefox Add On "View this Page in IE" whenever I need to print something. Works like a charm, but come on... it should work in Firefox too! I know there is some setting or something, but the Problems_printing_web_pages link had nothing there that worked for me.

  • Phone line and Internet cut off overnight

    Please can this be looked into immediately.
    Our phone line and internet have both been cut off at 03:00am this morning,
    I obviously cannot phone you guys to sort this so posting on here is my only resort.
    The hub is still showing a blue light and the phone says 'check phone line'
    But neither are actually working,
    I need ASAP with this.

    Welcome to this forum.
    This is a customer to customer forum only,
    This is where customers help each other get the most out of BT products & services.
    Anything you post here does not go to BT. Although the forum is moderated by BT, not all posts are read.
    If you need direct help from BT or have an urgent problem please use this linkContact Us.
    This is a public forum which can be viewed worldwide, so please do not post any personal information, especially phone numbers, account numbers, fault numbers, address information or email addresses, as this could be used to impersonate you.
    Thanks
    You can ring 0800 800 150 to report faults.
    Also visit https://www.bt.com/consumerFaultTracking/public/faults/tracking.do?pageId=31
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Menu page image and text cut off on burned DVD

    I burned a DVD using the travel theme. The project looks fine on my Intel iMac, but when I put the disc into my home DVD player, the menu page, which is not in letterbox format like the rest of the project, has the outer edges cut off and the text and images don't fit the television screen. The rest of the disc looks fine. Any suggestions as to why this happened?
    Thanks!

    Hi DrumRunner:
    iDVD: How to Determine TV Safe Area
    http://docs.info.apple.com/article.html?artnum=50151
    iDVD: Creating widescreen DVDs for standard size televisions
    http://docs.info.apple.com/article.html?artnum=303030
    Then there is:
    Old Toad's recipe for:
    Masking Movies to the TV Safe Area for iDVD
    The mask should be 640 x 480 pixels and the movie 514 x 386 (I arrived at this figure by making a snapshot of the TV save area of an iDVD project with Snapz). You can set this size after you’ve joined it with the mask movie with Quicktime Player Pro.
    Import the black mask jpg file into iMovie and and export it as a .mov file at the same length as your movie (there may be a way to not have to create a specific length mask for each movie but I haven't found it. If the times do not match the movie file will be synced to the length of the mask movie).
    Open the mask movie in QT Player Pro and then open your regular movie and make it the front window of the two. Now you'll need to run a QT Player AppleScript titled "Merge Movie 1 into Movie 2". You can get it from this Apple site: Quicktime Player Scripts.
    Then run the script. You can then run the merged movie to check it out. Your movie will be located in the upper lefthand corner of the window when played.
    When you open the Movie Properties window from the Window menu for the combined file you’ll see the following:
    Video Track 1: the black mask
    Video Track 2 : your movie file
    Tween track: Have no idea what this is.
    Sound track: self explanaotry
    Black mask.
    To set the size of your movie to the correct size select it in the Properties window and click on Visual Settings pane. Then enter 514 in the first field and hit enter. With the Preserve Aspect Ration box checked the other size will automatically be set.
    To center the video track in the center of the mask select the Video Track 2 item and plug in a offset of about: 60 & 40. You'll probably have to play with that to fine tune the centering. Doing the math and subtracting the movie dimensions from the mask dimensions and dividing by two just didn't get it perfectly centered. I'm sure I'm missing something here.
    Now save as a new self contained movie after checking the High Quality box at the bottom right.
    You can not import it into iDVD for preview and burning. One drawback is that you can't invoke the TV save area for a movie in iDVD to check it out. But you can mark it on the monitor screen while viewing a menu or slideshow and then play the movie to see how close you came.
    Since I made this workflow I've found that iDVD NTSC likes 720 x 540 pixels for standard video in NTSC format so you might want to make the black mask that size and adjust the video accordingly. As I said it takes some fiddling.
    Does that help?
    Sue

  • Pictures open at lower left of screen and are cut off at the bottom

    When I go to a site and open a picture it opens on the left bottom of the screen and the bottom portion of the picture is cut off. Any suggestions?

    Please post the web address here so we can look for ourselves. Also . . . .
    In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    Thank you!

  • HT4356 printing page from facebook using picture and airprint page in upper left quadrant with words and margin cut off

    I have a ipad 4 with 6700 hp printer. I was told by support that the way to print a page from facebook was to take a picture of the page and then print the picture. When I do this the picture is printed in the upper left hand quadrant with part of the wording cut off. Is the only or best way to print from facebook and how can I fix the location of the print. Seems Hoaky to me
    Luther288

    Well after weeks of anguish, trips to the apple store (not very professional ), calls to Apple support (no help), calls to HP support, they transfered me to airprint support who actually told me how to fix my problem. For an HP printer download from the app store HPAIO remote print. You have to search on AIO remote print. Installed this app and now I can make the print work like I would like. Good luck

  • Brochure template right-side edge gets cut off when printed

    its horizontal set-up, 8.5x11.0. but on both my printers (both HPs) the right edge gets cut off. how can I manipulate the doc to a smaller size without making the formating go cattywampus?
    comments are hidden (that helped a little)

    With my DeskJet there is an option to "scale down" a document to fit the page. Do yours offer that?
    Also, I apologize if this idea is too hokey, depending upon the nature and extent of your printing project, but would it be acceptable to set up your printer for legal-size paper and then trim the hardcopies?
    MacBook Pro   Mac OS X (10.4.9)  

  • My hp notebook 2000 takes forever to load and turn on, moves slow and sometimes cut off

    My pc takes forever to load, runs super slow and cuts off occasionally. I constantly have to recover it and that still don't seem to change a thing... is there anything else i can do to make my pc run the way it used too. I just bought it from Wal-Mart brand new last year August. I don't have music or movies or anything downloaded to it so I don't understand what's going on with it. Please help.

    Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hard drive & memory.
    If you don't have these options in BIOS you should have System Diagnostics accessed immediately after powering on the laptop by tapping the F2 key.
    You have a 1 year warranty. Phone HP Support for service.800-474-6836
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for

  • New Key field in DSO

    Hi BI Experts, I want to add a new key field in a DSO.This infoobject is in Data field now. The DSO contains data now. Can the new key field be added without deleting data from the DSO? Thanks

  • Re: Handling an exception in a superclass...

    Akos, When subclasses override ExecSQL(), do they call super.ExecSQL() before/after doing additional processing? If so, it makes sense to handle some generic exceptions in the superclass. If not, then your exception handlers will never be executed. F

  • Backbone needs to be operated on UDS?

    Hi I'm new to backbone system. Does backbone (the application proxies container) need UDS server for the operatiopn? Appreciate for the reply. Thanks.

  • Tables in APO

    Hi all, I am trying to derive data(Line, source item, target item, set up time & cost etc) related to production in APO using SQVI. The table names I get using conventional methods when tried in SE17 says structure or data cannot be read directly. Ca

  • Hana scheduled Backups

    Hello, I'm trying to schedule Hana's backups. First of all, I'm trying to execute with the sample script. #!/bin/bash # SAP HANA Backup # define backup prefix TIMESTAMP="$(date +\%F\_%H\%M)" BACKUP_PREFIX="SCHEDULED" BACKUP_PREFIX="$BACKUP_PREFIX"_"$