Siebel 7.7 installables

Hi,
Has anyone recently installed Siebel 7.7 from the installables available from edelivery.oracle.com? We are doing a 7.7 install as an interim step of an upgrade from 6.3 to 8 however some necessary files appear to be missing from the edelivery downloads, hence the install cannot proceed.
Has anyone experienced this and can offer a viable workaround or can anyone suggest an alternative reliable download location for the 7.7 install software? The product is Siebel 7.7 eBusiness Applications Horizontal.
Many thanks,
Kevin Armstrong.

There has been an issue with the 8.0.0.3 batch on My Oracle Support (Metalink 3) this week.
Still is I think. It could that there are more problems. What is the issue?
You can't download one or more files from edelivery?
If so, try asking here:
Downloads Issues
You are getting an error when you try to create the install image?
If so, what error message are you getting?
Axel

Similar Messages

  • Siebel 7.7 Installation and Configuration

    Dear Friends,
    I tried installing Siebel 7.7 on Windows 2003 Server SP2 with SQL Server 2005 Enterprise Edition. But every times i got failed. It was giving an error message stating that Setup through Install Base. Can anybody suggest me the Step by Step process of Siebel 7.7 Installation and configuration.
    Regards,
    Ram

    Hi,
    Did you run setup.exe within the language pack? install it from the base installer.
    Regards.

  • Siebel Develop Environment Installation

    Hello,
    I am trying to set up a siebel Develop Environment,
    following 3 three products i would like to install:
    Siebel tools,
    Siebel server,
    Siebel client,
    But there are so many files listed in the download page of e-delivery site with below 2 content sections,
    1,Siebel Business Applications Release 8.0 Translations Media Pack v1
    -- Total: 166 files,for multiple Language Extension Pack
    2,Siebel Business Applications Release 8.0 Media Pack v3 for Microsoft Windows (32-bit) -- Total: 25
    I found Siebel Tools, and Siebel client among the files of this section,
    But i am not sure which one is for siebel server , can anyone give direction for download Siebel server?
    below is the detailed list of second section,
    Download Siebel Business Applications, Version 8.0, Quick Installation Guide B42516-01 332K
    Download Siebel Business Applications, Version 8.0, Bookshelf V13792-01 145M
    Download Siebel Business Applications, Version 8.0, Third-Party Documentation B34816-01 64M
    Download Siebel Business Applications, Version 8.0, Base Applications for Windows (Part 1 of 3) V19051-01 Part 1 of 3 1.4G
    Download Siebel Business Applications, Version 8.0, Base Applications for Windows (Part 2 of 3) V19051-01 Part 2 of 3 1.9G
    Download Siebel Business Applications, Version 8.0, Base Applications for Windows (Part 3 of 3) V19051-01 Part 3 of 3 121M
    Download Siebel Business Applications, Version 8.0, Siebel Tools (Part 1 of 2) V15220-01 Part 1 of 2 1.5G
    Download Siebel Business Applications, Version 8.0, Siebel Tools (Part 2 of 2) V15220-01 Part 2 of 2 1.2G
    Download Siebel Business Applications, Version 8.0, Siebel Client (Part 1 of 2) V19057-01 Part 1 of 2 1.9G
    Download Siebel Business Applications, Version 8.0, Siebel Client (Part 2 of 2) V19057-01 Part 2 of 2 758M
    Download Siebel Business Applications, Version 8.0, eMail Marketing Integrated Server B34827-01 26M
    Download Siebel Business Applications, Version 8.0, Strong Encryption Pack B34828-01 437M
    Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 1 of 7) B34835-01 Part 1 of 7 146M
    Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 2 of 7) B34835-01 Part 2 of 7 624M
    Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 3 of 7) B34835-01 Part 3 of 7 633M
    Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 4 of 7) B34835-01 Part 4 of 7 683M
    Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 5 of 7) B34835-01 Part 5 of 7 698M
    Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 6 of 7) B34835-01 Part 6 of 7 692M
    Download Siebel Business Applications, Version 8.0, English Language Extension Pack (Part 7 of 7) B34835-01 Part 7 of 7 28M
    Download Siebel Business Applications, Version 8.0, ImageCreator Files V19056-01 106M
    Download Siebel Business Applications, Version 8.0.0.8, Fix Pack for Windows Part 1 of 4 (Part 1 of 2) V19198-01 Part 1 of 2 286K
    Download Siebel Business Applications, Version 8.0.0.8, Fix Pack for Windows Part 1 of 4 (Part 2 of 2) V19198-01 Part 2 of 2 2.0G
    Download Siebel Business Applications, Version 8.0.0.8, Fix Pack for Windows Part 2 of 4 V19199-01 2.0G
    Download Siebel Business Applications, Version 8.0.0.8, Fix Pack for Windows Part 3 of 4 V19200-01 1.5G
    Download Siebel Business Applications, Version 8.0.0.8, Fix Pack for Windows Part 4 of 4
    Thanks in advance,
    Eric

    You will get your server within V19051-01.
    THe image creator will generate the setup files from the jar files.
    I know this is a large amount of data to download.
    Good luck
    Evtloglvl

  • Siebel 8.1[21039] installation problem on Windows

    I'm installing Siebel 8.1[21039] HOR build on a Windows 2003 server machine and it pop out bunch of error messages as following during the gateway server installation.
    unable to launch:"C:\tmp\2\LRE2.tmp\bin\java.exe -Dtemp.dir=C:\tmp\2 -cp e:\appmgr\sieb_home\gtwysrvr\bin\setup.jar run -args LANG=ENU VISIBIKITY=ENTERPRISE MODE=LIVE MODEL_FILE=c:\tmp\sieb_home\gtwysrvr\admin\enterprise_console.scm" error code:"1" (SBL-STJ-00152)
    unable to launch:"C:\tmp\2\LRE2.tmp\bin\java.exe -Dtemp.dir=C:\tmp\2 -cp e:\appmgr\sieb_home\siebsrvr\bin\setup.jar run -args LANG=ENU VISIBIKITY=ENTERPRISE REPEAT=FALSE MODE=LIVE MODEL_FILE=c:\tmp\sieb_home\siebsrvr\admin\enterprise_console.scm" error code:"1" (SBL-STJ-00152)
    What could be wrong? Any suggestions?

    Hi
    I am also facing the same issue, on Siebel 8.0 installation on Windows.
    The gateway, the siebel entreprise and the webserver extension, succeed, but never the siebel server.
    Here is the siebel server configuration
    Main Task Selection : Create New Configuration
    Gateway Name Server Host Name : siebel
    Gateway Name Server TCP/IP Port : 2320
    Siebel Enterprise Name : siebel
    Siebel Server Logical Profile Name : siebel
    Siebel Server Description : Siebel Server Profile siebel
    Pick a Primary Language : English (American)
    Siebel Connection Broker Port : 2321
    Network TCP/IP Port for Synchronization Manager : 40400
    Choose your clustering configuration. : Not clustered
    Set the Siebel Server system service to start automatically : true
    Start the Siebel Server system service at the end of profile execution : true
    EVTWelcome : Configuration Wizard Hint: Siebel Bookshelf provides searchable documentation. For EVT command-line help run evt -? or EVT -h.
    Here is what appears after in the log file:
    2021 2008-10-15 16:42:33 0000-00-00 00:00:00 +0200 00000000 001 003f 0001 09 sw_cfg_util 1520 3068 E:\sba80\siebsrvr\log\sw_cfg_util.log
    GenericLog     GenericError     1     0000032848f50d24:0     2008-10-15 16:42:33     Error in transferring input values ,num of arrays incorrect 0, expected : 1
    GenericLog     GenericError     1     0000032848f50d24:0     2008-10-15 16:42:33     TransferInputsToValues returned error:3611539 to SetControlValues
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: ConfigMode
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: MainTask
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: MainTaskCreate
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: SiebelServerRoot
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: Vertical_Extension
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: NameserverHostName
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: NameserverPort
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: SiebelGateway
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: GatewayUseDefaultRead
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: SiebelEnterprise
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: GatewayCreateDefaultRead
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: AdminUser
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: AdminPassword
    GenericLog     GenericError     1     0000001748f605f0:0     2008-10-15 16:43:39     Executing step: InputServerProfile
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: InputServerDescription
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: EnableCompGroupsHOR
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: TRACELEVELDEFAULT
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: PrimaryLanguage
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: DeployedLanguage
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: SiebelRootW32
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: Setappperformance1
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: Setappperformance2
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: DoubleQuote
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: GatewayAddress
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: EnterpriseServer
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: RequestComponent
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: RequestServer
    GenericLog     GenericError     1     0000032b48f50d24:0     2008-10-15 16:43:39     Executing step: SetServerDesc
    GenericLog     GenericError     1     0000032d48f50d24:0     2008-10-15 16:43:39     Executing step: SetPrimary
    GenericLog     GenericError     1     0000032f48f50d24:0     2008-10-15 16:43:39     Executing step: SetNSServerHostname
    GenericLog     GenericError     1     0000033148f50d24:0     2008-10-15 16:43:39     Executing step: SetServerLang
    GenericLog     GenericError     1     0000033348f50d24:0     2008-10-15 16:43:39     Executing step: SyncStartTime
    GenericLog     GenericError     1     0000033548f50d24:0     2008-10-15 16:43:39     Executing step: SyncEndTime
    GenericLog     GenericError     1     0000033748f50d24:0     2008-10-15 16:43:39     Executing step: SyncPlannedCompletion
    GenericLog     GenericError     1     0000033948f50d24:0     2008-10-15 16:43:39     Executing step: CertFileNameServer
    GenericLog     GenericError     1     0000033948f50d24:0     2008-10-15 16:43:39     Executing step: CACertFileName
    GenericLog     GenericError     1     0000033948f50d24:0     2008-10-15 16:43:39     Executing step: KeyFileNameServer
    GenericLog     GenericError     1     0000033948f50d24:0     2008-10-15 16:43:39     Executing step: CertFileNameServer
    GenericLog     GenericError     1     0000033b48f50d24:0     2008-10-15 16:43:39     Executing step: CACertFileName
    GenericLog     GenericError     1     0000033d48f50d24:0     2008-10-15 16:43:39     Executing step: KeyFileNameServer
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:39     Executing step: EntPrepareSrvrDefs
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:39     Executing step: CreateServerConfiguration
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:41     Executing step: SCBPort
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:41     Executing step: SetSCBPort
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:41     Executing step: SetSiebRemotePortOverride
    GenericLog     GenericError     1     0000033f48f50d24:0     2008-10-15 16:43:41     Executing step: SetSiebRemotePortWorkaround
    GenericLog     GenericError     1     0000054348f50d24:0     2008-10-15 16:43:42     Executing step: ServerOptions
    GenericLog     GenericError     1     0000054348f50d24:0     2008-10-15 16:43:42     Executing step: SetupOM$$DeployedLanguage$$
    GenericLog     GenericError     1     0000054348f50d24:0     2008-10-15 16:43:42     Executing step: SetupOMenu
    GenericLog     GenericError     1     0000054348f50d24:0     2008-10-15 16:43:42     Failed during Execution, err: 5506021
    it doen't ask me any type of authentification on siebel server configuratin
    Have someone an siebel installation video to help me please?
    here is my e-mail: [email protected]
    Thx

  • 32-bit Siebel 7.7 and 7.8 Web Client on 64-bit Windows Vista

    Hello all,
    do you think it is possible to successfully install the 32-bit Siebel Web Client (version 7.7 and 7.8) on Windows Vista 64-bit ?
    I'm running Siebel client software against an Oracle 9i database. In fact, my Oracle client is version 10g (32-bit). But it works fine. Even with non-Oracle software.
    I succeeded in installing the 32-bit Siebel Tools (7.7/7.8) on my 64-bit Vista. Just had to prevent the installer from putting the software into the default folder which is "C:\Program Files (x86)". Using the default folder resulted in the Tools being not able to locate the Oracle tnsnames.ora file. I created my own C:\PRG folder instead. So for example, I now have "C:\PRG\Siebel\7.7\Tools" for Siebel Tools 7.7.
    I hoped this method would work for Siebel Web/Developer client 7.7/7.8 as well. But it didn't. In the middle of the installation process, the installer told me it could not locate MDAC and rolled the whole thing back.
    I googled a bit around and found that Windows Vista do not use MDAC any more. It uses "Windows Data Access Components" (Windows DAC) instead. But I also checked my "C:\Program Files" and "C:\Program Files (x86)" folders and found that, for example, msado15.dll and msadoXY.tlb (which is a part of that MDAC/DAC stuff) is there, both 32-bit and 64-bit versions.
    So my question is:
    How can you make the Siebel Web Client installer think that MDAC is in place and find it there (in the 32-bit folder, of course)?
    I'll welcome any help.
    Thanks,
    Pavel Foltyn

    First of you need to make sure you have the right versions of Siebel installed. Only the newest versions work in high interactivity mode with IE 7.0 and Windows Vista.
    Have a look at:
    Support for Microsoft Internet Explorer 7 (IE7) (Doc ID 475275.1)
    on Metalink 3.
    Geting that to work with the Vista 64-bit, is more then pushing it.
    Just my 2 cent.
    Axel

  • Detailed description / material about Siebel - OPA integration

    Hello, I'm looking for a detailed description / material about Siebel - OPA integration. Material which will help us & SI's to describe the interface between Siebel - OPA for the proposal. Many thanks in advance!
    Jori

    Hi Jori
    The best source of detailed information about the OPA Connector for Siebel (including tutorials and samples) is the product documentation itself.
    There will be a new version of the OPA Connector for Siebel released with version 10 of OPA later this week, including updated documentation. I suggest that you download OPA Connector for Siebel v10.0 from eDelivery and have a look at:
    1. OPA Connector for Siebel v10.0 Installation Guide (PDF)
    2. OPA Connector for Siebel v10.0 Developer Help (HTML)
    In future, we are also planning to make this information available via OTN and the OPN Competency Center.
    If you have further questions, please post.
    Cheers
    Anthony

  • OBIEE installation XP Professional SP2

    I am trying to install serverclient on my machine with XP Professional SP2 and have disabled Symantic from my system but as it initialize the installation it throws out en error saying which OS are supported but its in the list still its not installing.
    What could be the reason and solution to it?

    I think it's Oracle Business Intelligence Enterprise Edition. I don't know what it does , but it's used by Peoplesoft and Siebel. General installation doesn't seem to be the right forum.
    Werner

  • Where is "Web Server Instance Location" for SWSE installation in HP-UX?

    Hi there,
    We are using Siebel CRM SIA 8.1.1, our database version is Oracle 10g 10.2.0.2.
    For Siebel Web Server Installation in HP-UX, it will asked where is the location for "Web Server Instance Location" in HP-UX.
    Previously we also having problem for SUN Solaris, but there's a metalink on this (someone else raised it) and we manage to solve it.
    For HP-UX, we are using HP Web Server. According to bookshelf, we should use HP Apache Web Server?
    Kindly advice where is the location for "Web Server Instance Location" as per question in the installation.
    I believe our Web Server is installed in /opt/hpws.
    Regards,
    Rizwan

    Issues solved.
    Basically the location will /opt/hpws/apache32
    Currently Siebel 8.1.1 is only support apache32 bit.
    Things that need to consider, make sure you installing the same user as the user in apache32 folder.
    Means if you install apache32 as root, then you need to install SWSE as root.
    In my case, even thought i install as root, the apache32 folder will belong to BIN user. Not sure why.
    Then we had to install SWSE as bin user, then we manage to get the execution successfull msg.l
    Thanks

  • Oracle Application Management Pack for Siebel

    Does anyone on this board have any experience with the Oracle 10G Grid Control software and the Oracle Application Management Pack for Siebel. The installation of the Oracle Enterprise Manager Grid Control with the Siebel Management Pack has been successful on the Windows 2003 servers and we can view a list of the servers within Oracle's OEM tool. The problem I am facing is when I try to add a Siebel Enterprise. I receive the following error when I attempt to add a Siebel Enterprise.
    An error occured while adding Siebel Enterprise.
    Credentials - Missing Credentials for host <HOST_NAME>
    All of the credentials have been added properly. Does anyone have any experience or success using this product? If so please reply with feedback.
    .

    Please log a service request with tech support so that we can track this inquiry. On the service request, capture a screenshot of the page where you defined the host preferred credentials, and tell us the names of your servers.
    Btw, I take that you are stuck in the step in which you:
    - Click the "Add Enterprise" button to add the enterprise
    - Fill in the 7 parameters
    - Click Ok to start the discovery process
    Which release of Siebel and Enterprise Manager are you using?
    Chung

  • Siebel 8.1.1 Install error using MS SQL Server 08

    Hi,
    I am trying to set up a Siebel Proto environment on WinXP system. The database that I am using is MS SQL Server 2008 with SP1 installed.
    After installing Siebel at the Database Install step, I encountered a failure on step 'Import Repository Data' The error log generated is as follows:
    2010-04-03 18:47:45     C:\sba81\siebsrvr\bin\repimexp.exe /a I /G ENU /u SADMIN /p ***** /c SBA_81_DSN /d dbo /r "Siebel Repository" /f C:\sba81\dbsrvr\common\mstrep.dat /l C:\sba81\siebsrvr\log\install\output/imprep_prim.log
    2010-04-03 18:47:45     
    2010-04-03 18:47:45     Connecting to the database...
    2010-04-03 18:47:46     Connected.
    2010-04-03 18:47:46     Starting common api.
    2010-04-03 18:47:46     SQLstyle is 'Microsoft SQL Server'
    2010-04-03 18:47:46     SARM is OFF -change param SARMLevel to enable
    2010-04-03 18:47:46     SARM Client is OFF -change param SARMClientLevel to enable
    2010-04-03 18:47:46     SARM is OFF -change param SARMLevel to enable
    2010-04-03 18:47:46     SARM Client is OFF -change param SARMClientLevel to enable
    2010-04-03 18:47:46     SARM is OFF -change param SARMLevel to enable
    2010-04-03 18:47:46     SARM Client is OFF -change param SARMClientLevel to enable
    2010-04-03 18:47:47     Unable to verify login name SADMIN.
    2010-04-03 18:47:47     Unable to start common api.
    2010-04-03 18:47:47     Unable to start common api.
    2010-04-03 18:47:47     Error in initiate function..
    2010-04-03 18:47:47     Elapsed time: 2 sec.
    2010-04-03 18:47:47     (logapi.cpp (184) err=1 sys=0) SBL-GEN-00001: (logapi.cpp: 184) error code = 1, system error = 0, msg1 = (null), msg2 = (null), msg3 = (null), msg4 = (null)
    I am using SADMIN user for Database account and SIEBEL user for Table owner. I have also tried using SIEBEL user in both places.
    Basically what is SARM? And how can I enable it?
    I have tried connecting to the DB from the Server system and am successful in that.
    Thanks for the help in advance.
    With Regards,
    Tanmay Jain

    Hi EvtLoglvl,
    I am able to connect to the SQL Server using the ODBC connections and also SADMIN id has requisite SSE_ROLE granted to it and the default DB for it is SIEBEL_DB on which I am attempting installation. I was able to successfully run the grantuser.sql file that Siebel provides by default to create the roles and logins for SIEBEL, SADMIN and LDAPUSR.
    The problem I am encountering is when I try to perform the Database Server configuration. The system creates the required tables and indexes successfully on the DB. The problem is coming when it tries to Import the base repository that Siebel Server Installation comes with. The error log was for the same.
    I feel that the Siebel Installer is missing some APIs to connect to SQL Server 08.
    The SQL Server is hosted on a system with x64 architecture and the Siebel Server is on a x86 architecture system. I also have Service Pack 1 installed on both the DB Server and Siebel Server. Using third party tools I am able to manipulate the database without any hitches from the Siebel Server system.
    Latest, I have tried reinstalling the virtual environment completely, i.e. started from scratch and had the same issue when I tried the Siebel Database Server installation step. I sure hope I dont have to install SQL 05 and install Siebel Database on it and then do an upgrade of the database.
    Thanks for the info about SARM. It still shows up in the Log file and after it the install fails though.
    Thanks and Regards,
    Tanmay Jain

  • Siebel Application

    Hi,
    I have installed Oracle AS adapters 10.2.0.1.0...
    I want to use Siebel with it.. But i dont have a siebel application installed in my system.. Please post me the link from where i can download siebel application for installation. And which version of siebel should be better for Oracle 10.2.0.1.0

    Go to http://edelivery.oracle.com/

  • Enabling High Interactivity

    My company is working with a Siebel 7.5 installation on a Windows 2000 Server. We are trying to find out how to enable the High Interactivity mode on the installation. Is this possible in Siebel Tools, or through a cfg file?

    High Interactivity mode is enabled by default depending on what Siebel application you are running. All employee-facing applications (like Sales or Call Center) run in HI mode by default.
    It is possible to change this in the config file for each application. Look for a parameter called "HighInteractivity" and set it to either TRUE or FALSE. You must then restart the associated object manager.
    !!! Note however that Siebel does not support running employee-facing applications in SI mode, or running applications built for SI mode in HI mode. There is typically no reason for you to change this parameter.

  • Generate New Database failure

    Hi
    I am having an issue with Generate New Database. This is the first time after the installation.
    We have a Siebel 8.0 installation on HP Itanium with an Oracle 10.2.0.3.0 database.
    I get the followig errors:
    [Sybase][ODBC Driver][Adaptive Server Anywhere]Unable to start database server
    SQL Message, 08001: [Siebel Database][ODBC Driver][Adaptive Server Anywhere]Unable to start database server
    Error creating SQL Anywhere database template file (UTLOdbcConnect DBA/siebelmobiledb).
    Error in MainFunction (CreateDbTemplateFile)
    (gennewdb.cpp (610) err=524292 sys=2) SBL-GDB-00004: Error in Main function.
    Do we have to configure something? Can anyone help?

    We experienced the same issue. Our DB is Oracle 10.2.0.1 and our App Servers and DB servers are HP-Itaniums... (Prior to Oracle 10.2.0.2 as the minimum.)
    We were not able to resolve the issue as we switched to Linux before we completed. our initial deployment.
    As the Template DB is a SQL anywhere DB, did you try logging into the the DB using odbcsql.. This should confirm if your DB template file is corrupted or not...
    I'm interested in your findings as we did not resolve this before changing platforms...

  • Database Configuration: Table space does not exist error

    Hi all,
    while running Database configuration wizard in Siebel 8.0 installation process I receive the following error:
    C103: The table\\index space siebelts entered does not exist in your database.Please ensure you entered the correct table\\
    index space.
    I have verified the following things:
    1) Verified in database that, SIEBELTS tablespace is created but not online.
    2) grantusr.sql is executed successfully.SADMIN user and SIEBEL table owner accounts are created.
    3) SIEBELTS tablespace is assigned as default tablespace for SADMIN and LDAPUSER. There were no problems running the grantusr.sql.
    How can it be that the Wizard shows up this error when the grantusr.sql didn't show it?. The problem is the SIEBELTS. The wizard doesn't find it, but it does find the SIEBELINDEXTS tablespace. Checking the last one, it appears online.

    this is what I checked as DBA:
    SQL> select * from dba_tablespaces where tablespace_name='SIEBELTS';
    TABLESPACE_NAME BLOCK_SIZE INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
    MAX_EXTENTS PCT_INCREASE MIN_EXTLEN STATUS CONTENTS LOGGING FOR EXTENT_MAN
    ALLOCATIO PLU SEGMEN DEF_TAB_ RETENTION BIG
    SIEBELTS 8192 65536 1
    2147483645 65536 ONLINE PERMANENT LOGGING NO LOCAL
    SYSTEM NO AUTO DISABLED NOT APPLY NO
    SQL> select * from dba_tablespaces where tablespace_name='SIEBELINDEXTS';
    TABLESPACE_NAME BLOCK_SIZE INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
    MAX_EXTENTS PCT_INCREASE MIN_EXTLEN STATUS CONTENTS LOGGING FOR EXTENT_MAN
    ALLOCATIO PLU SEGMEN DEF_TAB_ RETENTION BIG
    SIEBELINDEXTS 8192 65536 1
    2147483645 65536 ONLINE PERMANENT LOGGING NO LOCAL
    SYSTEM NO AUTO DISABLED NOT APPLY NO

  • Arabic Language Pack Download

    Hi
    Can anyone please tell me where i can downlaod the ARABIC language pack for siebel server. I can't find any link for the same.
    regards
    Akarsh K Hebbar

    Hi Akarsh, nice to know that you fixed the issue,
    and i'd like to ask you a question, do you know from where can find the Siebel server download?
    i have just posted a new thread for this question in our forum, here is the link:
    Siebel Develop Environment Installation
    pls help me out...
    Thanks so much,
    Eric
    Edited by: user10703927 on Mar 9, 2010 6:17 PM

Maybe you are looking for

  • Exclusive Fullscreen mode

    Hi Whilst i can switch my windows into fullscreen mode via graphicdevice that doesn't make Windows, so for platform inter exchangability, i'm emulating a fullscreen setting, by extending the window beyond the bounds of the screen, which works grand.

  • MIRO take long time when enter invoice for PO with GR-based invoice

    Hi, In my client system, system take long time for extracting PO data while booking invoice via. MIRO for the purchase order which have GR-based IV is marked. However system take few second for extracting PO data when enter invoice via. MIRO for the

  • Faces is now a per-Library setting

    According to this KB article: Faces In Aperture, it is possible to turn off faces on a per-library basis. I'm still seeing the old preferences checkbox, but having turned it off in one Library and opened another, the checkbox was checked.  So apparen

  • Premiere Pro CS6 Render and Export Screen Glitch and Freeze

    I use Premiere Pro CS6 on a 2012 Macbook Retina display - 16GB RAM, 751GB Flash Storage, NVIDIA GeForce 650m Graphics Card, 2 External 4TB hardrives for scratch disks, Thunderbolt connection. When I try to render and export videos I often get a graph

  • FMs to get the order items list for an order template

    Hello everyone, I'm looking for sap FMs (or tables) to get the order items list for a given order template in CRM backend.  Any advice/suggestions? Thanks, Jin