Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Hello Folks,
Can anyone throw some light into what action is required on my scenario.
I have applied Fix Pack Siebel 8.0.0.12 on top of 8.0.0.11 SBA. After it is appled, I am facing a documented issue within the Release Notes for the 8.0.0.12 Fix Pack
The issue is "UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12". I tried the steps given with the MR document, however, I am still having this issue.
I am also not sure what is expected at the step of; Run the following command: seedgeneratorutil myseed.dat abcdef .
It's asking me for a value to enter for seed at command prompt. "Enter the seed":
what I should give here. As an assumption values,I gave SADMIN and tried to launch but still shows up the same error
Please Assit
Steps Details from Release Notes:
UNABLE TO LAUNCH URL AFTER APPLYING SIEBEL 8.0.0.12
Component: Server Infrastructure
Subcomponent: SWSE
Product Version: Siebel 8.0.0.12
Base Bug ID: 11938270
**Users are unable to launch the URL after applying the Siebel 8.0.0.12 Fix Pack.
**Use the following workaround to address this issue:
Navigate to the eappweb/bin directory from the command line on the SWSE installation.
Run the following command:
seedgeneratorutil myseed.dat abcdef
NOTE: In the example, myseed.dat is a filename. You can give any file name you wish.
The myseed.dat file is generated in the eappweb/bin directory.
Edit eapps.cfg to include the following parameters under the SWE section:
seedfile = < complete path for myseed.dat >
Bounce the web server.
(For Linux only) Copy libmod_swe.so from the eappweb/bin folder to the web/ohs/modules folder
Thanks
Kumar

Wilson,
Thanks for your reply.I have repeated the steps and regenerated the error messages.
Browser
Message:
An error occurred while trying to process your request. This error indicates a problem with the configuration of this server and should be reported to the webmaster (along with any errors listed below). We apologize for the inconvenience
Initialization error:
Unable to get the seed from binary file.
Log
2021 2011-09-20 23:23:01 0000-00-00 00:00:00 +0530 00000000 001 003f 0001 09 ss110920_7068 7068 7852 E:\sba80\SWEApp\log\ss110920_7068.log 8.0.0.12 [20444] ENU
ProcessPluginState ProcessPluginStateError 1 000000024e781b9c:0 2011-09-20 23:23:01 7852: [SWSE] Unable to get the seed from binary file.
Eapps.cfg
[swe]
Language = enu
Log = errors
LogDirectory = $(SWSERoot)\log
ClientRootDir = $(SWSERoot)
SessionMonitor = False
AllowStats = true
LogSegmentSize = 0
LogMaxSegments = 0
DisableNagle = False
seedfile = E:\sba80\SWEApp\BIN\80012seed.dat
Thanks
Kumar

Similar Messages

Unable to get the response from dynamic partnerlink

Hi
I used dynamic partnerlink, in this i am able to invoke the services dynamcially but i am unable to get the response from the services which i had invoked dynamically. In my dynamic partnerlink wsdl i had included callback binding and call back service in the wsdl you can see them below
<binding name="LoanServiceCallbackBinding" type="tns:LoanServiceCallback">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="onResult">
<soap:operation soapAction="onResult" style="document"/>
<input>
<soap:header message="tns:RelatesToHeader" part="RelatesTo" use="literal" required="false"/>
<soap:body use="literal"/>
</input>
</operation>
</binding>
<service name="LoanServiceCallbackService">
<port name="LoanServiceCallbackPort" binding="tns:LoanServiceCallbackBinding">
<soap:address location="http://openuri.org"/>
</port>
</service>
please help me on this
thanks
Srikanth

Hi, thanks for the input
Actually My partnerLink had two messageTypes one for Input message request and the other for the Output message request and for the input message i had used the operation as initiate also for the output messsage type operation as result.For both of them binding is defined.
With these am passing the values from myBPELl to the service which am nvoking dynamically but unable to capture the response the variables are local to myBPEL.

Unable to get the media from the Endeca Experience manager version 11.0.0

Hi.,
Iam unable to get the media from the Endeca Experience Manager for my endeca app 'CRS'.
I have created the endeca app named 'CRS' using the reference app discover-data-catalog-integration and successfully initialized and indexed.Iam able to see the Indexed data in my endeca_jspref and the configurations in my Experience Manager.
I want to import the media from my experience manager(this is my actual requirement) and for this iam executing the get_media.bat cmd from my application's control folder,the cmd was executing successfully without any errors, but the media folder was not populating with any images that i can see in the Experience manager .Please do the needful to resolve this issue.
ThankYou!!!
C:\>cd Endeca\apps\CRS\control
C:\Endeca\apps\CRS\control>get_media.bat
[07.04.14 11:48:08] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
[07.04.14 11:48:09] INFO: Updating provisioning for component 'DailyReportGenerator'.
[07.04.14 11:48:09] INFO: Updating definition for component 'DailyReportGenerator'.
[07.04.14 11:48:10] INFO: Definition updated.
[07.04.14 11:48:10] INFO: Exporting resource 'http://localhost:8006/ifcr/sites/CRS/media' to 'C:\Endeca\apps\CRS\control\..\config\media'
[07.04.14 11:48:11] INFO: Finished exporting resource.

What media are you trying to import? There won't be any media returned with get_media unless you but media in to begin with using the set_media cmd. However, it's preferable to use the media MDEX rather than storing media in the ECR.

Unable to get the values from ISearchResultList

Hi,
I am working on KM Indexmanagemnt API for searching with TREX, to build a search similar to msn or google.
I am following the example of Thilo Brandt, and after building the query, I am unable to retrieve the result from ISearchResultList, the results size its displaying is zero. But session.getTotalNumberResultKeys() is retrieving a value 20.
Here is the code I am using, please tell me where I am doing wrong.
public class SearchComponetOne extends AbstractPortalComponent {
     public void doContent(IPortalComponentRequest request,     IPortalComponentResponse response) {
com.sap.security.api.IUser nwUser =
               UMFactory.getAuthenticator().getLoggedInUser();
com.sapportals.portal.security.usermanagement.IUser user = null;
try {
      user = WPUMFactory.getUserFactory().getEP5User(nwUser);
     } catch (UserManagementException e) {
               response.write(e.getMessage());
   response.write("<html><head><title>Search</title></head><body>");
ResourceContext c = new ResourceContext(user);
try {
    IIndexService indexService = (IIndexService) ResourceFactory
                         .getInstance()
                         .getServiceFactory()
                         .getService(
                         IServiceTypesConst.INDEX_SERVICE);
   SearchQueryListBuilder sqb = new SearchQueryListBuilder();
   sqb.setSearchTerm("sap");
IQueryEntryList qel = sqb.buildSearchQueryList();
// get an instance of federated search
IFederatedSearch federatedSearch =
               (IFederatedSearch) indexService.getObjectInstance(
          IWcmIndexConst.FEDERATED_SEARCH_INSTANCE);
     List indexList = new ArrayList();
     String index = null;
     if (index != null && index.length() > 0) {
          // take a specified index from index= parameter
          indexList.add(indexService.getIndex(index));
     } else {
          // take all available indexes
          indexList = indexService.getActiveIndexes();
     // it is recommended to use a search session object
     // for searching execution
     ISearchSession session = null;
     if (session == null)
     session = federatedSearch.searchWithSession(qel, indexList, c);
response.write("Inside doContent session.getNumberResultKeys() => " + session.getNumberResultKeys()); // output as 20
     this.renderResultHeader(response, session, indexList);
     // get all results from the search session
ISearchResultList results =     session.getSearchResults(1, session.getTotalNumberResultKeys());
response.write(" from session => " + results.size() + " and size is : " + results.toString()); // I am getting the results.size() as zero
Thanks

I think the problem is UME related. I had the same problem once. Try using a system user for searching, instead of the logged on user.
Like this:
com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getUserFactory().getUser("cmadmin_service");
Please reward the points if this helps.

Unable to get the values from PAYLOAD

Hi,
i'm unable to get the values of payload. When i use
currentTask = client.getTaskQueryService().getTaskDetailsById(workflowContext, taskID);
Element payload = (Element)currentTask.getPayloadAsElement();
node = (Element)payload.getFirstChild();
System.out.println(node.getElementsByTagName("documentName").item(0).getNodeValue());
I get null but i instantiate the bpel process with a value and i have
- <payload>
- <ns1:DocumentReviewProcessRequest xmlns:ns1="http://xmlns.oracle.com/bpel/Review">
<ns1:documentTitle>vbvnmbvn</ns1:documentTitle>
<ns1:documentName>bvnbvnvn</ns1:documentName>
<ns1:URI>http://www.first.pt</ns1:URI>
<ns1:assignees>gestdoc</ns1:assignees>
<ns1:groups />
</ns1:DocumentReviewProcessRequest>
</payload>
if i use System.out.println(node.getElementsByTagName("HELLO").item(0).getNodeValue());
I get a normal erro 'cause this variable don't exist...
Can someone please help me?
Thanks!!

I think the problem is UME related. I had the same problem once. Try using a system user for searching, instead of the logged on user.
Like this:
com.sapportals.portal.security.usermanagement.IUser user = WPUMFactory.getUserFactory().getUser("cmadmin_service");
Please reward the points if this helps.

Why iam unable to get the valu from combobox

when i run this code
everytime iam getting blank alert
y iam unable to get the selected item from combo box
thank u
<%@ page import="java.util.Date"%>
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
    pageEncoding="ISO-8859-1"%><%@page import="java.sql.*,java.util.*,java.text.*,java.util.ArrayList, java.util.List,org.joda.time.DateTimeConstants,org.joda.time.LocalDate,
org.joda.time.Weeks"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<HTML>
<HEAD>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
    <TITLE>Reading Data From Text Fields</TITLE>
</HEAD><BODY onload=Datevalue()>
     <form name="form1" action ="" method="post" onSubmit="update();">
    <img src="nendrasys_logo.gif" align="right"></img>
<b><font color="669900"><h4 align="left">UserName:</font>
<jsp:useBean id="user" scope="session" class="nendrasys.User" />
<jsp:getProperty name="user" property= "name"/>
&nbsp&nbsp&nbsp&nbsp
<b><font color="90be00"><h4 align="left">Designation:</font>
<jsp:getProperty name="user" property= "designation"/>
<br><font color="669900"><h4 align="right">Project:</font>
    <select name="Projects">
     <option>Project:1</option>
     <option>Project:2</option>
     <option>Project:3</option>
     <option>Project:4</option>
     <option>Project:5</option>
</select>
<%! String s; %>
<% DateFormat dateFormat = new SimpleDateFormat("yyyy/MM/dd");
        Date date = new Date();
        //out.println(dateFormat.format(date));
            s= dateFormat.format(date);
%>
<select name="Dates" sizes=1 id="dates" onchange="Datevalue(this.value)">
<script type="text/javascript">

</script>
<br><br>
<TABLE BORDER="2" BORDERCOLOR="#336699" CELLPADDING="2" CELLSPACING="2" WIDTH="100%">
<TR>
<TD>&nbsp&nbsp&nbsp</TD>
<TD bgcolor="669900"><label id="sun"></label></TD>
<TD bgcolor="90be00"><label for="mon" id="Mon">Mon</label></TD>
<TD bgcolor="669900"><label for="tue" id="tue">Tue</label></TD>
<TD bgcolor="90be00"><label for="wed" id="wed">Wed</label></TD>
<TD bgcolor="669900"><label for="thu" id="thu">Thu</label></TD>
<TD bgcolor="90be00"><label for="fri" id="fri">Fri</label></TD>
<TD bgcolor="669900"><label for="sat" id="sat">Sat</label></TD>
<TD bgcolor="90be00"><label for="tot" id="tot">Total</label></TD>
</TR>
<tr>
<th>Project Work</th>
<td bgcolor="669900"><input type="text" name="c11" size="2" value="7" onBlur="javascript:document.frm.c12.value = document.frm.c11.value"></td>
<td bgcolor="90be00"><input type="text" name="c12" size="2" value="3"></td>
<td bgcolor="669900"><input type="text" name="c13" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c14" size="2"></td>
<td bgcolor="669900"><input type="text" name="c15" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c16" size="2"></td>
<td bgcolor="669900"><input type="text" name="c17" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c18" size="4"></td>
</tr>
<tr>
<th>Internal N/C</th>
<td bgcolor="669900"><input type="text" name="c21" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c22" size="2"></td>
<td bgcolor="669900"><input type="text" name="c23" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c24" size="2"></td>
<td bgcolor="669900"><input type="text" name="c25" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c26" size="2"></td>
<td bgcolor="669900"><input type="text" name="c27" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c28" size="4"></td>
</tr>
<tr>
<th>Public Holidays</th>
<td bgcolor="669900"><input type="text" name="c31" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c32" size="2"></td>
<td bgcolor="669900"><input type="text" name="c33" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c34" size="2"></td>
<td bgcolor="669900"><input type="text" name="c35" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c36" size="2" ></td>
<td bgcolor="669900"><input type="text" name="c37" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c38" size="4"></td>
</tr>
<tr>
<th>Holidays Taken</th>
<td bgcolor="669900"><input type="text" name="c41" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c42" size="2"></td>
<td bgcolor="669900"><input type="text" name="c43" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c44" size="2"></td>
<td bgcolor="669900"><input type="text" name="c45" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c46" size="2"></td>
<td bgcolor="669900"><input type="text" name="c47" size="2"></td>
<td bgcolor="90be00"><input type="text" name="c48" size="4"></td>
</tr>
</TABLE>
<br>
<center><input type="submit" value="Submit" /> </center>
<%
String username   = request.getParameter("userid");
String pwd = request.getParameter("pwd");
String connectionURL = "jdbc:mysql://localhost:3306/timestamp";
Connection connection = null;
Statement statement = null;
ResultSet rs = null;
String sql=null;
Class.forName("com.mysql.jdbc.Driver").newInstance();
connection = DriverManager.getConnection(connectionURL, "root","nendrasys");
statement = connection.createStatement();
//rs=statement.executeQuery(sql); %>
</form>
<SCRIPT language='Javascript'>
function update()
    alert("ciaoooooo");
    <%
        try
            String value=request.getParameter("c11");
            String value1=request.getParameter("c12");
         //   if(value!=null)
          // System.out.println(value);
           // System.out.println(value1);
        catch(NullPointerException n)
    %>
</script>
<SCRIPT language='Javascript'>
function Datevalue(date)
       // document.getElementById("dates").innerHTML=document.getElementById("sun").value;
alert(date);
         // alert( document.getElementById("dates"))
            <% System.out.println("bye");%>
</SCRIPT>
</BODY>
</HTML>

You mixed Java and Javascript in the expectation that they runs simultaneously.
You are Wrong.
You need to distinguish between the server side languages and client side languages. Java/JSP runs at the server side and produces a HTML page with other client side stuff in it like CSS and Javascript. When the HTML page is finished, it will be sent to the client and then Java/JSP stops. Once the HTML page is arrived at the client, there is no one line Java code in it, only its output/result. Do a View Source in your favourite web browser to see it. Only from that moment on, Javascript runs and/or can be invoked.
Whenever you want to use Java variables in Javascript, you need to print them out as a Javascript variable. Whenever you want to use Javascript variables in Java, you need to invoke a request to the server and pass them as parameters. The request can be either synchronous (a link or a form submit) or asynchronous (ajaxical).

Unable to get the JDBC from context

Dear experts
I am new to Sun Application Server and I am trying hard to get the JDBC/ JMS connection factory via context factory.
I tried two ways, one is the method in the development guide to get troough IIOP connection
Properties lProps = new Properties();
lProps.put(Context.INITIAL_CONTEXT_FACTORY, com.sun.jndi.cosnaming.CNCtxFactory);
lProps.put(Context.PROVIDER_URL, "iiop://192.168.0.1:33700")
Object lvLookupObj = ivContext1.lookup("java:comp/env/jdbc/myJDBC");
Another way is just new a blank inital context and lookup for the same thing.
Both run in a JSP which packed in a war and deployed.
For the first method, I got this:
Unable to create IIOP listener on the specified host/port: all interfaces/33700"
For 2nd method, I got this:
javax.naming.NameNotFoundException
Anyone can tell me what I have done wrong? since I have followed the development guide and the other seems also do in the same way. I checked the JNDI in the node agent which shows the JDBC factory is deployed and appear in the JNDI.
Many thanks in advance.

What media are you trying to import? There won't be any media returned with get_media unless you but media in to begin with using the set_media cmd. However, it's preferable to use the media MDEX rather than storing media in the ECR.

Am unable to get the data from Sys.databases when i use where condition for column owner_sid

Hi all,
Help me here when i try am unable to get a data,Can some one help me with a query to get.
If it cant be done can i know why..
select * from Sys.databases
where owner_sid='0x01'
What am trying is to get a login
names from syslogin
table with respect to Sid.
Select a.name,b.name,a.owner_sid from Sys.databases a
Join Syslogins b
on a.owner_sid = b.sid
where owner_sid like '0x01'
Thanks all in Advance.....

Below are a couple of examples of how to accomplish the task. Note that SID is varbinary so the literal should not be enclosed in quotes.
SELECT
a.name AS DatabaseName
,b.name AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
JOIN sys.server_principals b ON
a.owner_sid = b.sid
WHERE owner_sid = 0x01;
SELECT
a.name AS DatabaseName
,SUSER_SNAME(owner_sid) AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
WHERE a.owner_sid = 0x01;
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Unable to get the data from the stored procedure

Hello Folks,
I have this stored procedure and am trying to get the data from the table stage_bill but for some reason i am not sure its not pulling the data.Am a beginner in pl/sql Can any one please help to find out. I can give the code below.
create or replace procedure Load_FADM_Staging_Area_TEST(p_data_load_date date) is
-- local variables
v_start_date                date;
v_end_date                  date;
-- cursor starting
CURSOR c_get_data
IS
SELECT
   a.batch_id
,a.beginning_service_date
,a.bill_id
,a.bill_method
,a.bill_number
,a.bill_received_date
,a.bill_status
,a.bill_type
,a.change_oltp_by
,a.change_oltp_date
,a.client_datafeed_code
,a.client_id
,a.created_date
,a.date_of_incident
,a.date_paid
,a.deleted_oltp_by
,a.deleted_oltp_date
,a.duplicate_bill
,a.ending_service_date
,a.event_case_id
,a.event_id
,a.from_oltp_by
,a.oltp_bill_status
,a.review_status
,'HRI' schema_name
, sysdate Load_date
,'ETLPROCESS001' Load_user
,v_start_date as Row_Effective_Date
,null Row_End_date
from stage_bill a
where
--created_date >= to_date('20101031 235959', 'YYYYMMDD HH24MISS')
created_date >= v_start_date
and
--created_date <= to_date('20101111 235959', 'YYYYMMDD HH24MISS')
created_date <= v_end_date
and not exists
(select
b.batch_id
,b.beginning_service_date
,b.bill_id
,b.bill_method
,b.bill_number
,b.bill_received_date
,b.bill_status
,b.bill_type
,b.change_oltp_by
,b.change_oltp_date
,b.client_datafeed_code
,b.client_id
,b.created_date
,b.date_of_incident
,b.date_paid
,b.deleted_oltp_by
,b.deleted_oltp_date
,b.duplicate_bill
,b.ending_service_date
,b.event_case_id
,b.event_id
,b.from_oltp_by
,b.oltp_bill_status
,b.review_status,
b.schema_name,
b.Load_date,
b.Load_user,
b.Row_Effective_Date,
b.Row_End_Date
from STG_FADM_HRI_STAGE_BILL_TEST b)
-- cursor o/p variables
v_batch_id                  stage_bill.batch_id%TYPE;
v_beginning_service_date    stage_bill.beginning_service_date%TYPE;
v_bill_id                   stage_bill.bill_id%TYPE;
v_bill_method               stage_bill.bill_method%TYPE;
v_bill_number               stage_bill.bill_number%TYPE;
v_bill_received_date        stage_bill.bill_received_date%TYPE;
v_bill_status               stage_bill.bill_status%TYPE;
v_bill_type                 stage_bill.bill_type%TYPE;
v_change_oltp_by            stage_bill.change_oltp_by%TYPE;
v_change_oltp_date          stage_bill.change_oltp_date%TYPE;
v_client_datafeed_code      stage_bill.client_datafeed_code%TYPE;
v_client_id               stage_bill.client_id%TYPE;
v_created_date          stage_bill.created_date%TYPE;
v_date_of_incident    stage_bill.date_of_incident%TYPE;
v_date_paid         stage_bill.date_paid%TYPE;
v_deleted_oltp_by     stage_bill.deleted_oltp_by%TYPE;
v_deleted_oltp_date    stage_bill.deleted_oltp_date%TYPE;
v_duplicate_bill     stage_bill.duplicate_bill%TYPE;
v_ending_service_date   stage_bill.ending_service_date%TYPE;
v_event_case_id        stage_bill.event_case_id%TYPE;
v_event_id            stage_bill.event_id%TYPE;
v_from_oltp_by         stage_bill.from_oltp_by%TYPE;
v_oltp_bill_status   stage_bill.oltp_bill_status%TYPE;
v_review_status     stage_bill.review_status%TYPE;
v_schema_name        varchar(50);
v_Load_date          date;
v_Load_user            varchar(50);
v_Row_Effective_Date   date;
v_Row_End_Date         date;
Begin
if p_data_load_date is null then
    select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date is not null then
   select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
else
    raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;
-- cursor c_get_data loop begin
OPEN c_get_data;
    LOOP                                                       -- cursor c_get_data loop begin
      FETCH c_get_data
       INTO
        v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
   v_Load_date,
   v_Load_user,
   V_Row_Effective_Date,
   v_Row_End_Date;
    EXIT WHEN c_get_data%NOTFOUND;
insert into STG_FADM_HRI_STAGE_BILL_TEST
batch_id
,beginning_service_date
,bill_id
,bill_method
,bill_number
,bill_received_date
,bill_status
,bill_type
,change_oltp_by
,change_oltp_date
,client_datafeed_code
,client_id
,created_date
,date_of_incident
,date_paid
,deleted_oltp_by
,deleted_oltp_date
,duplicate_bill
,ending_service_date
,event_case_id
,event_id
,from_oltp_by
,oltp_bill_status
,review_status
,schema_name
,Load_date
,Load_user
,Row_Effective_Date
,Row_End_Date
values(
       v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
v_Row_Effective_Date,
v_Row_End_Date ) ;
COMMIT;
    END LOOP;
    CLOSE c_get_data;

Maybe you need something else, like
CREATE OR REPLACE PROCEDURE load_fadm_staging_area_test (
p_data_load_date DATE
) IS
v_start_date   DATE;
v_end_date     DATE;
BEGIN
SELECT NVL (p_data_load_date, SYSDATE) - 7,
         NVL (p_data_load_date, SYSDATE) - 1
INTO   v_start_date,
         v_end_date
FROM   DUAL;
MERGE INTO stg_fadm_hri_stage_bill_test b
USING      (SELECT *
              FROM   stage_bill
              WHERE created_date BETWEEN v_start_date AND v_end_date) a
ON         (b.bill_id = a.billl_id)
WHEN NOT MATCHED THEN
    INSERT     (batch_id,
                beginning_service_date,
                bill_id,
                bill_method,
                bill_number,
                bill_received_date,
                bill_status,
                bill_type,
                change_oltp_by,
                change_oltp_date,
                client_datafeed_code,
                client_id,
                created_date,
                date_of_incident,
                date_paid,
                deleted_oltp_by,
                deleted_oltp_date,
                duplicate_bill,
                ending_service_date,
                event_case_id,
                event_id,
                from_oltp_by,
                oltp_bill_status,
                review_status,
                schema_name,
                load_date,
                load_user,
                row_effective_date,
                row_end_date
    VALUES     (a.batch_id,
                a.beginning_service_date,
                a.bill_id,
                a.bill_method,
                a.bill_number,
                a.bill_received_date,
                a.bill_status,
                a.bill_type,
                a.change_oltp_by,
                a.change_oltp_date,
                a.client_datafeed_code,
                a.client_id,
                a.created_date,
                a.date_of_incident,
                a.date_paid,
                a.deleted_oltp_by,
                a.deleted_oltp_date,
                a.duplicate_bill,
                a.ending_service_date,
                a.event_case_id,
                a.event_id,
                a.from_oltp_by,
                a.oltp_bill_status,
                a.review_status,
                'HRI',
                SYSDATE,
                'ETLPROCESS001',
                v_start_date,
                NULL
END load_fadm_staging_area_test;Whenever you code a cursor and a loop, ask yourself. Do I need that?
Regards
Peter

Unable to get the data from a website with dynamically filled textboxes when accessing through myWb.Document.GetElementById("num1").InnerText;

Hi Team,
I am learning on webbrowser control and during the learning phase i have the following issue:-
My webbrowser [mywb in this case] is successfully navigating and displaying the website content in webbrowser control. However; that site has three textboxes with dynamically allocated text from asp script
code behind; I have tried to display these textboxes values by providing the correct id of these textboxes in my visual studio 2013 code; but I am not receiving any data except null. Can you help me on this as early as possible.
asp code written to dynamically assign the data to textbox:-
<%
myvar=Request.form("some")
Response.write("<input type=text id=num1 value=" + myvar+ ">")
%>
The code written in VS 2013 to access the textbox by its id when the DocumentCompleted event is triggered:-
string mystr ="";
mystr = myWb.Document.GetElementById("num1").InnerText;
MessageBox.Show(mystr);
Thank You in Advance.
Regards, Subhash Konduru

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because the issue is related to website, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to get the data from table controller

Dear All,
I am facing the following problem in BSP tableview,
I am having tableview on page as below
<htmlb:tableView id              = "reportsTable2"
                       headerVisible   = "true"
                       headerText      = "Pending PANs:"
                       footerVisible   = "true"
                       design          = "standard"
                       visibleRowCount = "20"
                       width           = "100%"
                       fillUpEmptyRows = "false"
                       columnWrapping = "false"
                       columnWidth     = "200"
                       sort            = "server"
                       keyColumn       = "panid"
                       onRowSelection = "alternate()"
                       selectionMode   = "SingleSelect"
                       iterator        = "<%= tv_itr %>"
                       table           = "<%=IT_DATE_RANGE_PAN %>" >
      </htmlb:tableView>
I want collect the table view data in DO_REQUEST method, when i press the sort option on any column in table.
i used the code in DO_request,
if lv_button_id NE '0'.
      tv ?= cl_htmlb_manager=>get_data(
             request =   runtime->server->request
             name    = 'tableview'
             id      = 'reportsTable2' ).
      tv_data = tv->data .
but , I found no table content in tv_table.
even i tried with export, import .. normally we will dod in ABAP.   not wotking.
export IT_DATE_RANGE_PAN2 from IT_DATE_RANGE_PAN to memory id memid1.
import IT_DATE_RANGE_PAN2 to IT_DATE_RANGE_PAN from memory id memid1.
Can any body help me to solve the above issue.
Regards,
Kishan

Hi,
Refer your earlier forum...
how to collet data from tableview in MVC
Thnx
suriya

Unable to get Field Names from Archived File

Hi All,
We have a ECC 6 Ehp4 system. When i retrieve Idocs archived using SARA, the data only contains application data. There is no field names available - eg: posting date, tax code etc. Please find below the background on this issue.
I configured archiving of process idocs (status 52,12,03) from EDIDC tables. I set up the settings for Archive Object IDOC and archived the data for 15 days.
Both archiving and deletion of data from the table was successful.
I tried reading the Idoc data from Archive File using the Information System option -> Info structure (available as default for Idoc).
But the data retrieved only shows the Application data for all the segments of the IDoc. The fields for the segments like Tax Code, Posting Date etc are not available in the data. Functional teams will not be able to make sense with just the application data.
Am I missing some setting? Is there any way to retrieve the related field values also ?
Please help.
Thanks and Regards,
Raghavan

Hi All,
There is tcode WE10. You could choose if the data source is archive and also the archive session. You will get the list of segments provided. click on the segment number and you will get the data.
Thanks and Regards,
Raghavan

Unable to get the print from the zebra printer

hi,
i have copied a SAP standard form into a Zform. i have made changes to the Zform depending on my requirement(i.e. i have added more fields and also barcodes). I did not make any changes to the driver program since i copied the standard layout. After making changes to the Zform when i check the print preview everything seems to be fine. But when i try to print the Zform from a zebra printer it does not get printed. But it says printing is completed and also a spool request is created but the print never comes

Hi Ambarish,
There will be an option to disable and enable the print icon for a particular sap screen . SAP Screen has been designed as per business requirement only . You may reach out to your functional team or developer team to assign the required output type and form which can enable the icon .
Also check whether you have required authorization to print from SAP
I hope so it will help you
Regards,
Aparna

Unable to get the value from the jsp page.

Hi,
I have developed a JSP, having two split fields seperated by some buttons..The sample code for the same is like this..
(Only the required portion is included)
<script>
function reloadPageOK() {
document.product.method="post"
document.product.action="./TheSamePage.jsp?status=OK"
document.product.submit()
function moveValue(from,to) {
if(from.selectedIndex>=0) {
var text=from[from.selectedIndex].text
var length= to.length
to[length]=new Option(text,from.value,false,false)
from.remove(from.selectedIndex)
function moveAll(from,to) {
if(from.length>0) {
var menutext="";
var i;
var len=from.length
for(i=0;i<len;i++) {
from.selectedIndex=0
menutext=from[0].text
var length= to.length
to[length]=new Option(menutext,from.value,false,false)
from.remove(from.selectedIndex)
</script>
<table width="100%" border="0" cellspacing="0" >
<tr class="contactDetail">
<td width="10%" class="table_grid1" rowspan="4">
<div class="contactDetail">
<select name="lstProviderLeft" size="7" style="width:111">
<option> PDP</option>
<option> Net</option>
<option> Par</option>
<option> Non-Par</option>
</select>
</div>
</td>
<td width="20%" bgcolor="#FFFFFF" class="contactDetail">
<input type="button" value=" > " name="btnLtrProvider" class="button" onclick="moveValue(lstProviderLeft,lstProviderRight)">
</td>
          <td width="10%" bgcolor="#FFFFFF" rowspan="4" class="contactDetail"> <font face="Arial, Verdana, Helvetica, sans-serif" size="2" >
          <select name="lstProviderRight" size="7" style="width:111"></select>
          </font></td>
<tr>
<td width="8%" class="contactDetail">
<input type="button" value=" >> " name="btnLtrAllProvider" class="button" onclick="moveAll(lstProviderLeft,lstProviderRight)" >
</td>
</tr>
<tr>
<td width="8%" class="contactDetail">
<input type="button" name="btnRtlProvider" value=" < " class="button" onclick="moveValue(lstProviderRight,lstProviderLeft)" >
</td>
</tr>
<tr>
<td width="8%" class="contactDetail" height="22">
<input type="button" name="btnRtlAllProvider" value=" << " class="button" onclick="moveAll(lstProviderRight,lstProviderLeft)" >
</td>
</tr>
</table>
<p align = "center"> <input type="button" value=" OK " onclick="reloadPageOK()">
The page is working fine. That is we can move the values in the left field to right as single or group.After submitting I need to get the values in the left & right fields respectively.
I have used the method
request.getParameterValues("lstProviderLeft");
and pointed this to an array of strings,but it returns 'null' .
How can I solve the above problem....Post your comments on this issue
Thanking u

probably the request.getParmeterValues will not work in this case as the name of the 2 select boxes are different....
You can do this utility by using Javascript....concantinate the values of the 2 select boxes and put the concantinated strings (with a delimiter) in two hidden fields and capture the same fields in the target JSP/Servlet.
I have modified ur code...have a look...
--------------------Start-----------------
<html>
<head></head>
<title></title>
<body>
<script language="Javascript">
function reloadPageOK()
document.product.method="post" ;
document.product.action="./TheSamePage.jsp?status=OK" ;
document.product.submit();
function moveValue(from,to)
     if(from.selectedIndex>=0)
          var text=from[from.selectedIndex].text;
          var length= to.length ;
          to[length]=new Option(text,from.value,false,false);
          from.remove(from.selectedIndex);
function moveAll(from,to)
     if(from.length>0)
          var menutext="";
          var i;
          var len=from.length;
          for(i=0;i<len;i++)
               from.selectedIndex=0;
               menutext=from[0].text ;
               var length= to.length;
               to[length]=new Option(menutext,from.value,false,false) ;
               from.remove(from.selectedIndex);
function fnSubmitPage(from,to)
     var strfromSelBox = "";
     var strtoSelBox = "";
     if(from.length>0)
          var len=from.length;
          for(var i=0;i<len;i++)
               strfromSelBox=strfromSelBox+":"+from.text ;
     if(to.length>0)
          var len=to.length;
          for(var i=0;i<len;i++)
               strtoSelBox=strfromSelBox+":"+to[i].text ;
     document.product.hdFromValue.value=strfromSelBox;
     document.product.hdFromValue.value=strtoSelBox;
     document.product.method="post" ;
     document.product.action="" ;//Name of the JSP or servlet wherever u want to direct to....
     document.product.submit();
</script>
<form name="product">
<input type="hidden" name="hdFromValue">
<input type="hidden" name="hdToValue">
<table width="100%" border="0" cellspacing="0" >
<tr class="contactDetail">
     <td width="10%" class="table_grid1" rowspan="4">
          <div class="contactDetail">
               <select name="lstProviderLeft" size="7" style="width:111">
                    <option> PDP</option>
                    <option> Net</option>
                    <option> Par</option>
                    <option> Non-Par</option>
               </select>
          </div>
     </td>
     <td width="20%" bgcolor="#FFFFFF" class="contactDetail">
          <input type="button" value=" > " name="btnLtrProvider" class="button" onclick="moveValue(lstProviderLeft,lstProviderRight)">
     </td>
     <td width="10%" bgcolor="#FFFFFF" rowspan="4" class="contactDetail">
          <font face="Arial, Verdana, Helvetica, sans-serif" size="2" >
               <select name="lstProviderRight" size="7" style="width:111">
               </select>
          </font>
     </td>
<tr>
     <td width="8%" class="contactDetail">
          <input type="button" value=" >> " name="btnLtrAllProvider" class="button" onclick="moveAll(lstProviderLeft,lstProviderRight)" >
     </td>
</tr>
<tr>
     <td width="8%" class="contactDetail">
          <input type="button" name="btnRtlProvider" value=" < " class="button" onclick="moveValue(lstProviderRight,lstProviderLeft)" >
     </td>
</tr>
<tr>
     <td width="8%" class="contactDetail" height="22">
          <input type="button" name="btnRtlAllProvider" value=" << " class="button" onclick="moveAll(lstProviderRight,lstProviderLeft)" >
     </td>
</tr>
</table>
<input type="button" value=" OK " onclick="reloadPageOK()">
<input type="button" value=" Submit " onclick="fnSubmitPage(lstProviderRight,lstProviderLeft)">
</form>
</body>
</html>
--------------------Finish---------------
Hope this helps...
Thanks

Unable to get the result from file to file Scenerio

Hi Experts,
I used BPM scenario like File(sender) to RFC File and then Response to outputfile(receiver).
In above situation, When I execute the above scenario shows following system error;
Error: No Object found for this message.
I didnt find the above error, Please give me some help for the above error.
Advanced Thanks
Prasad

Hi Chandra Sekhar,
Check that your BPM has been cached. For that go to the transaction sxi_proxy and check for the Business Process section in the left hand side. If the cache has a status of 99 (Return Code), then it means that the Business Process did not load. So, to load your business process, Go to SXI_CACHE, select your business process and press "activate". Now another screen opens and the status of the process is 2. If you press "activate" again the status should change to 0. Then the Business Process loads and the integration process works.
Regards,
Ravikiran.C
PS: Pls consider awarding points for helpful replies.

Siebel 8.0.0.12 Fix Pack; Unable to get the seed from binary file.

Similar Messages

Maybe you are looking for