Siebel Analytics prompt reference

Hi All
I have a report made in Siebel Analytics or Oracle Presentation Services.
In the report I must show a prompt filter with few values (calculates) and some columns from a table.
My problem is the filters in the Criteria doesn't use the prompt value. Between them don't exists any relation, I use the prompt values like a lookup table values, which will filter the query table.
Something like prompt_value >= column_value.
I tried with a variable and didn't work.
Is possible someway to reference the prompt value? something like :prompt_name.value or @prompt_value
Thanks a lot
Eze

no they cannot be on same machine under same user account

Similar Messages

  • Queries in Siebel Analytics 7.8 (Cayman)

    Hi
    I am new to Siebel Analytics. I have few questions
    1) I have dashboard where in 3 prompts Prompt1,Prompt2 and prompt3 , when i pass the values to these and press "Submit" and after that a web link.i am getting a report on new page.
    here the requirement is how display these selected prompt values of Prompts1,2 & 3 on top of the report which is shown in new page. This is to acheive that the report is run for the above selected values.
    2) I have two prompts for Country and State , as the no of states associated to each country is not constant. When i select India as value for prompt1, then in next page i should have so many tabs as many states India has...the tabs would be AP,TN,Delhi etc etc..these no of tabs would be dynamic depending on country name. Each tab should take the statename as parameter and generate the report.
    3) How to make prompts mandatory? i.e If i have prompts1,2,3&4. Then if i say prompts 1and 4 are to be mandatory the report cannot be run unless the user enters some value in to this prompt. Again there is no default value for these mandatory promopts.
    How would i make a dashboard prompt mandatory..( I am not using report/page prompts but dashboard prompts)
    Request help on above items...
    Thanks in Advance
    Kris

    Use current_date.
    mark if helps
    ~ http://cool-bi.com

  • Go URL in Siebel Analytics 7.7

    I need to know where should I write my go url script in Siebel Analytics. I will appreciate your prompt response. Thank you.

    Use current_date.
    mark if helps
    ~ http://cool-bi.com

  • Page Level bursting in Siebel Analytics 7.8.2

    Hi All,
    We have a page with 3 reports and a region prompt.The prompt has 20 values.We have 20 users and we have to burst the page to the 20 users based on the region he belongs to (corresponding user should get his page and should view only the data for his region).We are using LDAP authentication and we dont have data level security to our dashboard and also we dont have security tables in the database(oracle).How to achieve this requirement at the dashboard level without making any changes in the database.if required any changes at the backend then what should we do to achieve this.
    Thanks in advance,
    Rajeev.
    Edited by: user0123 on Jun 20, 2009 2:14 AM

    Page Level bursting in Siebel Analytics 7.8.2
    Double posting = bad forum behaviour

  • Siebel Analytics: Restricting Items in Graph

    I have a graph and a table report which I have created in Siebel Analytics and would like to display the same number of items in my graph as my table. I am able to restrict the number of records in the table but have not been able to do the same in the graph. In other words, if I restrict the records in the table to 10, then I would like the graph to display 10 items as well. If users want to see more records then they can select the next button. Does anyone know how I can do this?
    Thanks,
    Mary

    I tried with out the is prompt but still it's not working. I have that for future use because we will be using the report for dash boarding where we might use the dashboard Prompt. but i get your point only one is needed either the dashboard prompt or graph prompt. My best bet at this point is may be just remove the graph prompt and try to drag it on the dashboard and use a dash prompt instead.

  • Error in using aggregate function in Outer Query in Siebel Analytics

    Hi,
    When I am using aggregate function in outer query in Siebel Analytics I am facing error.
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 59111] The SQL statement must include a GROUP BY clause. (HY000)
    Bellow is the code.
    SELECT test1.username saw_0, test1.desg saw_1,COUNT (test2.querydate) saw_2
    FROM (SELECT POSITION.CBL username,
    POSITION.CBP desg
    FROM "CM"
    WHERE (POSITION.BPTCD = 'Marketing')
    AND (POSITION.EDate =TIMESTAMP '1899-01-01 00:00:00'
    ) test1,
    (SELECT users.UN username,
    measures."Query Count" querycount,
    measures."Max Total Time" secs,
    topic.db dashboardname,
    "Query Time".DATE querydate
    FROM "Plan"
    WHERE (topic."Dashboard Name" IN ('DS'))) test2
    WHERE test2.username = LOWER (test1.username)
    AND test2.dashboardname = 'DS'
    GROUP BY test1.username, test1.desg

    Should your query be a valid SQL query?
    I can't think that the query you have would be valid in a SQL plus window.
    Chris

  • Upgrade Siebel Analytics 7.8.2 RPD to BI Applications 7.9.6.1 RPD

    We are upgrading from Siebel Analytics 7.8.2 version to BI Applications 7.9.6.1 version. The Siebel Analytics RPD is customized and having custom catalogs which are based on Pharma tables and the Core model is not at all customized. So, I have followed the steps specified in section 'Upgrading the Oracle BI Repository for Industry-Specific Analytics Applications' of Upgrade guide. Its known that there are some datawarehouse changes occurred between these versions. One of these changes are,
    W_ORG_D of Siebel 7.8.2 is replaced with W_PARTY_ORG_D in BI Apps 7.9.6.1,
    W_PERSON_D of Siebel 7.8.2 is replaced with W_PARTY_PER_D in BI Apps 7.9.6.1.
    In order to upgrade the RPD we need to make use of MAP file that comes with the installation of BI Apps 7.9.6.1. For this process I'm using the map file rename782-796.map while equilizing the RPDs. But I dont find any information related to the above schema changes in the map file even though they are Oracle shipped ones. So, after doing some analysis I have listed the Alias tables created on top of W_ORG_D in 7.8.2 RPD and similarly in 7.9.6.1 RPD and specified the mapping information of these Alias tables in existing MAP file. Equlized the RPDs using the modified MAP file and done the merge process. But I'm observing some issues like the merged RPD is having both W_ORG_D and W_PARTY_ORG_D tables in all the three layers. Can I get any help on fixing this issue.
    Thank You,

    Any idea on the above issue?
    Edited by: user12129725 on Apr 28, 2010 6:38 AM

  • Error in Siebel Analytics ReportUI portlet Authentication error.

    Hi Everyone
    I am trying to Integrate Between Weblogic Portal and OBIEE.
    Weblogic Portal Version: 10.3
    OBIEE : 11g
    Integration Using: Report UI Portlet
    1.
    While creating OBIEE environment "weblogic" user was setup as "Administrator" account.
    Following is list of users that i see from weblogic console for OBIEE.
         User          |     Group
         weblogic     |     Administrator
         BISystemUser|     Administrators
         OracleSystemUser|     OracleSystemGroup
    2.
    From Portal environment, i have added "sawjsr168portlets.war" as shared library.
    Changed portlet.xml and web.xml with following.
         -changes in portlet.xml
              1. oracle.bi.presentation.sawserver.URL
                   http://localhost:9704/analytics/saw.dll
              2.     oracle.bi.presentation.portlets.jsr168.reportui.AdminUserName
                   weblogic
              3.     oracle.bi.presentation.portlets.jsr168.reportui.AdminPwd
                   xxxxxx
              4.     oracle.bi.presentation.report.Path
                   /Shared Folders/Sample Lite/Published Reporting/Reports/Brand Revenue Details
         -changes in web.xml
              1.     com.siebel.analytics.web.SAWServer.Host
                   localhost
              2.     com.siebel.analytics.web.SAWServer.Port
                   9704
    3. On Portal Desktop, I am authenticating with "weblogic" user ("weblogic" user which is configured in Portal Domain).
    While doing so, I see following exception on Portal Domain.
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.transport.http.HTTPSender> <BEA-000000> <<?xml version="1.0" encoding="UTF-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:sawsoap="com.siebel.analytics.web/soap/v6"> <soap:Body> <soap:Fault><faultcode>soap:Server</faultcode>
    <faultstring>Authentication error. Details: An invalid User Name or Password was entered. </faultstring>
    <detail><sawsoape:Error xmlns:sawsoape="com.siebel.analytics.web/soap/error/v1">
    <sawsoape:Code>IAI2Z2JJ</sawsoape:Code>
    <sawsoape:Message>Authentication error. Details: An invalid User Name or Password was entered. </sawsoape:Message>
    <sawsoape:File>main/project/websubsystems/soapservicesimpl.cpp</sawsoape:File>
    <sawsoape:Line>183</sawsoape:Line>
    <sawsoape:LogSources>
         <sawsoape:LogSource>saw.soap.makesession</sawsoape:LogSource>
         <sawsoape:LogSource>saw.soap.sessionrequesthandler</sawsoape:LogSource>
         <sawsoape:LogSource>saw.SOAP</sawsoape:LogSource>
         <sawsoape:LogSource>saw.httpserver.request.soaprequest</sawsoape:LogSource>
         <sawsoape:LogSource>saw.rpc.server.responder</sawsoape:LogSource>
         <sawsoape:LogSource>saw.rpc.server</sawsoape:LogSource>
         <sawsoape:LogSource>saw.rpc.server.handleConnection</sawsoape:LogSource>
         <sawsoape:LogSource>saw.rpc.server.dispatch</sawsoape:LogSource>
         <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
         <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
         <sawsoape:LogSource>saw.threads</sawsoape:LogSource>
    </sawsoape:LogSources><sawsoape:Error>
    <sawsoape:Code>IHVF6OM7</sawsoape:Code>
    <sawsoape:Message>Authentication Failure.</sawsoape:Message>
    <sawsoape:File>main/project/webconnect/connection.cpp</sawsoape:File>
    <sawsoape:Line>387</sawsoape:Line>
    <sawsoape:LogSources>
         <sawsoape:LogSource>saw.connectionPool.getConnection</sawsoape:LogSource>
         <sawsoape:LogSource>saw.securitysubsystem.checkauthentication.runimpl</sawsoape:LogSource>
         <sawsoape:LogSource>saw.soap.makesession</sawsoape:LogSource>
         <sawsoape:LogSource>saw.soap.sessionrequesthandler</sawsoape:LogSource>
         <sawsoape:LogSource>saw.SOAP</sawsoape:LogSource>
         <sawsoape:LogSource>saw.httpserver.request.soaprequest</sawsoape:LogSource>
         <sawsoape:LogSource>saw.rpc.server.responder</sawsoape:LogSource>
         <sawsoape:LogSource>saw.rpc.server</sawsoape:LogSource>
         <sawsoape:LogSource>saw.rpc.server.handleConnection</sawsoape:LogSource>
         <sawsoape:LogSource>saw.rpc.server.dispatch</sawsoape:LogSource>
         <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
         <sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
         <sawsoape:LogSource>saw.threads</sawsoape:LogSource>
    </sawsoape:LogSources><sawsoape:Error>
    <sawsoape:Code>OPR4ONWY</sawsoape:Code>
    <sawsoape:Message>Odbc driver returned an error (SQLDriverConnectW).</sawsoape:Message>
    <sawsoape:File>main/project/webodbcaccess/odbcconnectionimpl.cpp</sawsoape:File>
    <sawsoape:Line>356</sawsoape:Line>
    <sawsoape:Error>
    <sawsoape:Code>U9IM8TAC</sawsoape:Code>
    <sawsoape:Message>State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
    [nQSError: 43113] Message returned from OBIS.
    [nQSError: 13038] The user does not have impersonation privilege. (08004)</sawsoape:Message>
    </sawsoape:Error>
    </sawsoape:Error>
    </sawsoape:Error>
    </sawsoape:Error>
    </detail>
    </soap:Fault></soap:Body> </soap:Envelope>>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(exit00)>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.transport.http.HTTPSender> <BEA-000000> <Exit: HTTPDispatchHandler::invoke>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SimpleChain> <BEA-000000> <Exit: SimpleChain::invoke>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(semanticCheck00)>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.handlers.soap.MustUnderstandChecker> <BEA-000000> <Doing SOAP semantic checks...>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <Enter: SOAPPart::getAsSOAPEnvelope()>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(currForm)>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <current form is FORM_SOAPENVELOPE>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.client.AxisClient> <BEA-000000> <Exit: AxisClient::invoke>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <Enter: SOAPPart::getAsSOAPEnvelope()>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(currForm)>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <current form is FORM_SOAPENVELOPE>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(toAxisFault00)>
    <Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.enterprise> <BEA-000000> <Mapping Exception to AxisFault
    Authentication error. Details: An invalid User Name or Password was entered.
         at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
         at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
         at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
         at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
         at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
    <Jan 3, 2011 11:05:05 AM EST> <Error> <ServletContext-/research-portal> <BEA-000000> <Error in Siebel Analytics ReportUI portlet
    Authentication error. Details: An invalid User Name or Password was entered.
         at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
         at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
         at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
         at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
         at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers
    Kindly let me know your thoughts on following.
    1. Am i missing any steps?
    2. Is it possible that Portal 10.3 and OBIEE 11g is not compatible?
    3. Admin Username and password that i specified in Report UI portlet's preferences, is it wrong user (or user from wrong group maybe)? Do i need to specify user who is from another group?
    4. I changed "SAWServer" url and port in web.xml. Is that okay?
    5. Is there any way, i can get more detailed information from OBIEE Server by enabling certain kind of debug?
    Let me know if any input is needed from my side. Any input is highly appreciated.
    Thanks

    Hi Now I am facing bellow error.
    Can anybody suggest me what to do?
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65PState: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 13017] User or group has not been granted the Direct Database Access privilege to access the database 'sh'. Please verify the User/Group Permissions in the Oracle BI Administration Tool. (HY000)

  • Reg: Limitations of Siebel Analytics 7.8.2.x or lower versions of it.

    Hi
    I want to know what are limitations of Siebel Analytics 7.8.2 or lower versions..
    If anybody have these or any pointers to documentation where it is available would be of great help....
    Thanks in advance...
    Cheers

    Hi
    Can anybody pls help by replying to this???
    Any pointers to docs which detail these wud alo be great help
    Cheers
    Kris

  • Write back in Siebel Analytics 7.8.2?

    Hi,
    Is write back functionality available with Siebel analytics version 7.8.2. ? In which version of siebel analytics the write back functionality is introduced? Also please let me know how to enable write back in SA 7.8.2.
    There is no bookshelf available for SA 7.8.2.
    Any help would be much appreciated.
    Thanks.

    Any idea on the above issue?
    Edited by: user12129725 on Apr 28, 2010 6:38 AM

  • Oracle BI (Siebel Analytics) / Data Warehouse Data Security

    Hello,
    We are implementing Oracle Siebel Analytics and Custom datawarehousing using Oracle 9i DB. I am interested to know if we can implement consistent data security model for different data marts. Means with one single data warehouse, I want to implement data security model or policies in one place and they are applied consistently across all of the datamarts.
    1. Can we or oracle support this kind of secinerio.
    2. If yes, what would be perfect model an example will be helpful, and if not what best approach is available to resolve this security model.
    Any suggestion or help would be great.
    Regards
    Girish

    Hi, Do you also get some other packages names that the error msg reports like ...
    RPE-01012 Cannot deploy PL/SQL maps to the target schema because it is not owned by the Control Center and "SOME WRT.... package names" I think once did I face this and made sure that the repository user has some packages granted through OWBREPOS_OWNER/OWB_REPOS_OWNER to the user you are using to run the mapping.
    Regards,
    Mohammad Farhan Alam

  • Job Openings: DataStage, BI, OBIEE, Siebel Analytics

    We have SEVERAL positions available in DataStage, BI, OBIEE, Siebel Analytics area. These are urgent requirements and interviews are going on so resumes with out candidate Email/Phone# will not be considered.
    Also these position requires on site face to face screening.
    Please send us your resume/Visa Status/Hourly Bill Rate to [email protected] Please mention the position you are interested in the email subject.
    1. ETL Architect with a strong Datastage experience of 7-10 years. The candidate should have experience in a lead architect role in major data warehouse projects for fortune 500 companies. Information Server 8.0 and high tech experience are preferred.
    2. Data Analyst with DataStage experience. Knowledge of Siebel CRM, order life cycle, lead, opportunities, etc. is preferred. High tech experience preferred.
    3. Senior OBIEE Developers with minimum of 4 years of experience in OBIEE development. V.10 experience is required. RPD development expertise (with time-series, aggregate navigation) and solid dashboard development experience also required. Enterprise or broad cross-functional domain experience a plus. Should have 4+ years experience on OBIEE projects at US based companies.
    4. BI Project Manager with experience managing BI projects specifically. Can be BO, Cognos, Siebel Analytics, or other leading BI app. Ideally, candidate would have some experience working with service/call center and SAP Service Module. Must have very good communication skills*written and verbal. Should have 4 years minimum exp on BI projects at US based companies.
    5. BI Analysts with OBIEE experience and experience working with service/call center data. Must have very good communication skills*written and verbal. Should have 3 years minimum OBIEE experience in US based companies.

    Hi ,
    Any help.....?
    Regards,
    KK

  • Load balancing of web servers in Siebel Analytics v 7.7.1?

    Hi Experts,
    Can we load balance the Webservers in Siebel Analytics 7.7.1 version? If Yes, can you please give me the steps how to setup this?
    Thanks,
    Madhukar

    Hello Mr. Tripathi ,
    Option 2 is the more typical way to increase capacity.   Of course you can also increase capacity by simply adding additional server nodes to a single instance.  if you are trying avoid downtime due to loss of one of the application servers, option 2 will still work.  Just because the primary application server goes down does not mean the secondary will become unavailalbe.  There are some cases where the secondary server could be interrupted, such as if the jms provider was on the primary instance, but there is an automatic fail-over of jms provider and other funcionality such as user sessions.
    I think option 2 is the most easy to implement for you.  Having 2 seperate systems  access the same database could cause some complications with DB locking which are hard to troubleshoot.
    Regards,
    Nathan

  • What is the syntax of portal page nav or go url for siebel analytics 7.8.5

    onclick=\\\"JavaScript:PortalPageNav(event,'//shared/Vision_QoE_Reporting/_Portal/VISION QoE', 'VPPSID Detail Report','F_VISION_QOE', 'VPPSID','\"+VPPSID+\"','CTL_REPORT_MEASURE','REPORT_NAME','\"+REPORT_NAME+\"','F_VISION_QOE','EDW_DATE','\"+EDW_DATE+\"');\\\"

    Sudipta Gupta wrote:
    Hi Experts,
    Currently my company has given me the task to check the issues of IE8 support for Siebel Analytics as they are trying to upgrade IE6 to IE8.
    So I have the following queries:
    1. Will Siebel Analytics 7.8.5 supports IE8?Yes
    2. If not, then is there any patch available for 7.8.5 version to support IE8?No patch required
    3. What are the other options there might be?You might face some issues with GUI but no any major techical promblem
    Hope this clears your doubt

  • IE8 Support for Siebel Analytics 7.8.5

    Hi Experts,
    Currently my company has given me the task to check the issues of IE8 support for Siebel Analytics as they are trying to upgrade IE6 to IE8.
    So I have the following queries:
    1. Will Siebel Analytics 7.8.5 supports IE8?
    2. If not, then is there any patch available for 7.8.5 version to support IE8?
    3. What are the other options there might be?
    Please let me know your inputs.
    Regards
    Sudipta

    Sudipta Gupta wrote:
    Hi Experts,
    Currently my company has given me the task to check the issues of IE8 support for Siebel Analytics as they are trying to upgrade IE6 to IE8.
    So I have the following queries:
    1. Will Siebel Analytics 7.8.5 supports IE8?Yes
    2. If not, then is there any patch available for 7.8.5 version to support IE8?No patch required
    3. What are the other options there might be?You might face some issues with GUI but no any major techical promblem
    Hope this clears your doubt

Maybe you are looking for

  • How can I copy iCloud calendar and contact back to Outlook personal folder?

    After I install iCloud control panel for Windows 7 and turn on, it copied everything calendar and contact into iCloud and delete everything from Outlook Personal Folder.   I DONT WANT THIS!!!     How can I copy iCloud calendar and contact back to Out

  • How to find out whether a program is running in Hyper-V virtual machine or not?

    If I want to make a program which only running in Hyper-V virtual machine, how can I find out whether the program is running in Hyper-V  virtual machine or not?

  • Attachments added to the Interactive form is lost after submit

    Hi All, I have a scenario where the user can add attachments to the Interactive Form Online and click on Submit to archive the filled form. The problem is that i am not able to retrieve the attachments added to the form. The datasource of the ITF is

  • Duplex Printing for Officejet 5740

    I recently purchased an Officejet All-In-One 5740 printer. I did not realize that automatic duplex was a default and not an option. I can't find a way to change to 1-sided print (there is no selection in Properties). Is there an allowance for 1-sided

  • Any impact on Informatica by upgrading DB?

    Hi, Our client environment has been set up with the following: Informatica 6.2.2 Microsoft SQL Server DB 2000 As these versions are pretty old now, they are planning to migrate Informatica 8x and SQL Server 2005. But they plan to upgrade DB first due