Siebel Application 7.8 monitoring through Sitescope.
Hi,
I need to monitor Siebel Application 7.8 through HP tool. As per the doc its mentioned "The Siebel Server Manager client must be installed only on the machine where tool is running". But as per my vendor,siebel 7.8 doesn't have the server manager client . only siebel 8.0 and above has this exe.
But as per the tool support ,the same is available with this version.
Please confirm on the below requests
1) Does Siebel 7.8 actually support Siebel Server Manager utility (srvrmgr.exe)?
2) If so, what is the path to retrieve the sam.
Please help me in resolving the same..
Regards
Jaison
Hi Jaison, you should be able to use srvrmgr in 7.8 even though you will find a number of issues with it...
if you are very objectively looking for a top monitoring/diagnostic software for siebel, and you need this software to help you proactively identify root-cause of -any- issue that affect the use and performance of siebel, then we recommend you try Germain Monitoring software and compare it with Sitescope.
All our customers were initially using hp's, oracle's, quest's... monitoring technologies...they then selected germain monitoring software; give it a try...you wont be disapointed...germain monitoring is all what senior siebel engineers ever needed to effectively do their job
Feel free to download germain monitoring from www.germainsoftware.com ftp site (contact [email protected] if you need help in installing it).
Regards,
Michael Hok - GERMAIN SOFTWARE - PERFORMANCE MONITORING S/W FOR SIEBEL CRM
21 Columbus Avenue, Suite 221, San Francisco, CA 94111, USA, michael at germainsoftware.com, http://www.germainsoftware.com
Similar Messages
-
Cannot access Siebel application through browser
Hi,
We have installed Siebel demo quickstart SIA 8.1.1 in one laptop.The Siebel application works fine. The only problem is that we cannot access the Siebel application through a browser. We have to launch the Siebel application from Windows program menu.We need to set up the Siebel application so that we can access it through IE browser. There are some settings that need to be set up in the .cfg files to make the application available trough Internet Explorer.
We have already tried using the url http://servername:8081/callcenter_enu/start.swe? But it returns "page cannot be displayed". We are accessing the application from the host computer.
Regards
CPAre you able to connect with dedicate client?
if yes, then you just to need to verify setting/configuration for web server. Which can be found in installation guide.
Also could you please share logs. Error you are getting is quite generic and have multiple symptoms.
Have you tried to search on Oracle Support. There is complete article available for this error.
Regards,
Rajesh Kumar -
Error while accessing siebel application
Hi,
I installed Siebel 8.1 on Windows 2003. But when i try to access the application via http://localhost/service_enu I am getting the error:
The server you are trying to access is either busy or experiencing difficulties. Please close the Web browser, open a new browser window, and try logging in again.
The steps i am following are :
1. Installed Siebel Enterprise Server including Siebel Gateway, Siebel Server and Database Configuration Utilities.
2. Configured Siebel Gateway Name Server.
3. Create Siebel Enterprise.
4. Create SWSE logical profile.
5. Run Database Configuration utilities to install Siebel Database.
6. Run Siebel Server configuration.
7. Installed and configured SWSE.
All the above steps executed successfully. But when after these steps i try to access the Siebel application through http://localhost/service_enu, the above mentioned error is displayed.
I am pasting the contents of the ss101203_3216.log:
2021 2010-12-03 09:15:00 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 ss101203_3216 3216 2632 c:\sba81\SWEApp\log\ss101203_3216.log 8.1.1 [21111] ENU
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (ssmsismgr.cpp (626) err=3670020 sys=0) SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
ObjMgrSessionLog Error 1 000000024cf80c90:0 2010-12-03 09:15:00 Login failed for Login name : SADMIN
ProcessPluginState ProcessPluginStateError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [SWSE] Open Session failed (0xa600d1) after 0.0363 seconds.
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:00 (ssmsismgr.cpp (626) err=3670020 sys=0) SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
ObjMgrSessionLog Error 1 000000024cf80c90:0 2010-12-03 09:15:00 Login failed for Login name : SADMIN
ProcessPluginState ProcessPluginStateError 1 000000024cf80c90:0 2010-12-03 09:15:00 3900: [SWSE] Open Session failed (0xa600d1) after 0.0047 seconds.
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (ssmsismgr.cpp (626) err=3670020 sys=0) SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
ObjMgrSessionLog Error 1 000000024cf80c90:0 2010-12-03 09:15:01 Login failed for Login name : SADMIN
ProcessPluginState ProcessPluginStateError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [SWSE] Open Session failed (0xa600d1) after 0.0064 seconds.
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
SisnTcpIp SisnSockError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [TCPIP-client] recv() failed for sd=716 (err=10054 | An existing connection was forcibly closed by the remote host (peer).)
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (smconn.cpp (318) err=1180671 sys=0) SBL-NET-01023: Peer disconnected
GenericLog GenericError 1 000000024cf80c90:0 2010-12-03 09:15:01 (ssmsismgr.cpp (626) err=3670020 sys=0) SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
ObjMgrSessionLog Error 1 000000024cf80c90:0 2010-12-03 09:15:01 Login failed for Login name : SADMIN
ProcessPluginState ProcessPluginStateError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [SWSE] Open Session failed (0xa600d1) after 0.0040 seconds.
ProcessPluginRequest ProcessPluginRequestError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [SWSE] Failed to obtain a session ID. Login failed attempting to connect to %1
ProcessPluginRequest ProcessPluginRequestError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [SWSE] Set Error Response (Session: Error: 10879185 Message: Login failed attempting to connect to siebel.TCPIP.None.None://GUPAR01-W3-27:2321/SBA_81/SFSObjMgr_enu)
ProcessPluginRequest ProcessPluginRequestError 1 000000024cf80c90:0 2010-12-03 09:15:01 3900: [SWSE] Login failed.
SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
Please provide pointers to resolve this problem.
Thanks,
Anu
Edited by: 816755 on Dec 3, 2010 6:16 AMHi Robert,
After configuring the Siebel Gateway Name Server, the execution is successfull showing no errors. But when i see the log files, i can see some errors in those. I have created a user SADMIN as administrator and then trying to install Siebel. The config info is :
Main Task Selection : Create New Configuration
Configuration Task Selection : Configure a New Enterprise in a Gateway Name Server
Gateway Name Server Authentication User Account Name : SADMIN
Gateway Name Server Authentication User Account Password : ********
Gateway Name Server Host Name : GUPAR01-W3-27
Gateway Name Server TCP/IP Port : 2320
Siebel Enterprise Name : SBA_81
Enterprise Description : SBA_81 Enterprise
Primary Siebel File System : C:\sba81\gtwysrvr\fs
RDBMS Platform : Oracle Database Enterprise Edition
Database Table Owner : SIEBEL
Oracle SQLNet Connect String : SIEBEL
Siebel Database User Account Name : SADMIN
Siebel Database User Account Password : ********
Enterprise Security Authentication Profile : Database Authentication (default)
Security Adapter Name (named subsystem) : DBSecAdpt
Propagate Authentication Settings to the Gateway Name Server : true
The contents of sw_cfg_util(001).log is:
2021 2010-12-06 01:41:25 2010-12-06 01:41:25 -0500 00000016 001 003f 0001 09 sw_cfg_util 1768 3684 C:\sba81\gtwysrvr\log\sw_cfg_util(001).log 8.1.1 [21111] ENU
GenericLog GenericError 1 000000e84cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MaxEntrTasks for config object TxnProc
GenericLog GenericError 1 000000e84cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MaxEntrTasks for Comp:TxnProc in CompGroup:Remote
GenericLog GenericError 1 000000fc4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MaxEntrTasks for config object RepAgent
GenericLog GenericError 1 000000fc4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MaxEntrTasks for Comp:RepAgent in CompGroup:Remote
GenericLog GenericError 1 0000013d4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1091) err=3407908 sys=0) SBL-SUL-00036: Could not set the component attributes for component MsgBroadcastMgr
GenericLog GenericError 1 0000013d4cfc05a4:0 2010-12-06 01:41:25 Error creating Component:MsgBroadcastMgr in CompGroup:CommMgmt
GenericLog GenericError 1 0000028a4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param SearchSpec for config object TaskLogCleanup
GenericLog GenericError 1 0000028a4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:SearchSpec for Comp:TaskLogCleanup in CompGroup:TaskUI
GenericLog GenericError 1 0000028f4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MaxMtServers for config object RTSDispatcher
GenericLog GenericError 1 0000028f4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MaxMtServers for Comp:RTSDispatcher in CompGroup:RTSRemote
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MTInfraTrace for config object AdminNotify
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MTInfraTrace for Comp:AdminNotify in CompGroup:SystemAux
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MaxSubtasks for config object AdminNotify
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MaxSubtasks for Comp:AdminNotify in CompGroup:SystemAux
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param MaxWorkerTasks for config object AdminNotify
GenericLog GenericError 1 000002ad4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:MaxWorkerTasks for Comp:AdminNotify in CompGroup:SystemAux
GenericLog GenericError 1 000002b24cfc05a4:0 2010-12-06 01:41:25 (sccitems.cpp (2047) err=2883613 sys=0) SBL-SCC-00029: Setting parameter "AdminRoleName" on level "Component Definition" is not supported. Using list params command, check to see if parameter is settable at this level.
GenericLog GenericError 1 000002b24cfc05a4:0 2010-12-06 01:41:25 (sccconfg.cpp (1419) err=2883613 sys=0) SBL-SCC-00029: Setting parameter "AdminRoleName" on level "Component Definition" is not supported. Using list params command, check to see if parameter is settable at this level.
GenericLog GenericError 1 000002b24cfc05a4:0 2010-12-06 01:41:25 (srscobj.cpp (640) err=2883613 sys=0) SBL-SCC-00029: Setting parameter "AdminRoleName" on level "Component Definition" is not supported. Using list params command, check to see if parameter is settable at this level.
GenericLog GenericError 1 000002b24cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (235) err=2883613 sys=0) SBL-SCC-00029: Setting parameter "AdminRoleName" on level "Component Definition" is not supported. Using list params command, check to see if parameter is settable at this level.
GenericLog GenericError 1 000002b24cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:AdminRoleName for Comp:ServerMgr in CompGroup:System
The contents of sw_cfg_util(002).log is :
2021 2010-12-06 01:41:25 2010-12-06 01:41:25 -0500 00000005 001 003f 0001 09 sw_cfg_util 896 2220 C:\sba81\gtwysrvr\log\sw_cfg_util(002).log 8.1.1 [21111] ENU
GenericLog GenericError 1 000003144cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param SearchSpec for config object LoyEngineBatch
GenericLog GenericError 1 000003144cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:SearchSpec for Comp:LoyEngineBatch in CompGroup:LoyaltyEngine
GenericLog GenericError 1 0000031e4cfc05a4:0 2010-12-06 01:41:25 (sulcobj.cpp (1232) err=3407911 sys=0) SBL-SUL-00039: Could not set the param SearchSpec for config object LoyEngineInteractive
GenericLog GenericError 1 0000031e4cfc05a4:0 2010-12-06 01:41:25 Error creating Parameter:SearchSpec for Comp:LoyEngineInteractive in CompGroup:LoyaltyEngine
The contents of sw_cfg_util(003).log is :
2021 2010-12-06 01:41:27 2010-12-06 01:41:27 -0500 00000003 001 003f 0001 09 sw_cfg_util 2436 2664 C:\sba81\gtwysrvr\log\sw_cfg_util(003).log 8.1.1 [21111] ENU
GenericLog GenericError 1 000003714cfc05a4:0 2010-12-06 01:41:27 (samisc.cpp (285) err=2883589 sys=0) SBL-SCC-00005: Internal:No more items found.
GenericLog GenericError 1 000003714cfc05a4:0 2010-12-06 01:41:27 (sasess.cpp (397) err=591895 sys=0) SBL-ADM-02071: Enterprise server SBA_81 not found in gateway server
Please provide pointers in resolving this issue.
Thanks,
Anu -
How to integrate two Siebel Applications into single app UI
Dear All,
Currently we have a Siebel application which is running with various Siebel modules. Like for example in one single application object manager we are having various screens and views related to various modules like UCM, Loyalty, Marketing etc.
But due to some operational reasons, we would like to deploy few modules as applications on different machines.For example we will install a separate Marketing application on a server and loyalty on a separate server.
How can we integrate all these applications installed in different different machines in a single App Object Manager to provide a single UI interface for the user.
So even after segregating into different applications, we would like to have single app UI for user.
Please suggest if it already being implemented in such a way anywhere.
RegardsHello...
Siebel offers many great options to help you implement your business needs. siebel bookshelf is very well documented...we can also connect you with a few great system integrators that could help you architect your siebel implementation? best wishes for this holiday season...
Regards,
Sylvia Fong Ny- GERMAIN SOFTWARE - Performance Monitoring Software for Siebel CRM
21 Columbus Avenue, Suite 221, San Francisco, CA 94111, USA
[email protected], http://www.germainsoftware.com -
Is it possible to use my ipad 4 as a second monitor through a USB connection.
Is it possible to use my ipad 4 as a second monitor through a USB connection.
perhaps, but my information was current. I had the same question and was looking for and answer and found it. So I responded in order to help others who found this question and were looking for an answer. This community is made more helpful and kept current by adding new answers with current information.
imobl... air display was a valid response for 2011 predating the question. Also using Monitor2go was valid in 2012. There were USB mirroring and as a 2nd display for an iPad options at the time the original question was asked. -
How do I get my Mac Pro to see the second monitor through a video splitter and/or switcher?
In a recording studio we have a Mac Pro with two video display monitors in the control room and we want to be able to show the content of the second monitor to the person in the recording room on a big display monitor there. However, when we interpose a switcher or splitter between the computer and the second monitor so that we can (with a switcher) switch the second monitor signal from the control room monitor to the record room monitor or (with a splitter) split the signal to go to both monitors, we have no luck. On startup the computer does not see the monitor through the switcher, so it doesn't recognize its existence. If we start the computer up without the switcher in the signal chain, it sees the second monitor just fine, and (weirdly enough) we can then change the cabling to interpose the switch, which then works to switch back and forth between second monitors (control room and record room), but that cable swapping's a royal PITA. We want a simple solution that will allow us to start up the computer, see the second monitor in the control room, then choose to show it to the person in the record room with a simple flip of the switch (or even better, split the signal so it's available both places). The splitter we've tried most recently is this one: http://tinyurl.com/curen39 I'd appreciate any advice from people who have tried this configuration or something similar with success. We have a full ProTools HD Accel 3 system installed, so there's no room to install a second video card. Thanks.
Mac Pro 8-Core 2.4 GHz, OS 10.6.8Christopher Dobrian wrote:
Thanks for the response! Yes, it's a 5x70 video card, a 5770 I believe. In any case, it does have the three ports, but (a not-well documented fact) that doesn't mean one can really get three full-resolution signals out of it at one time, as you alluded to in your message. So, yes, we did try hooking all three up directly to the computer, but the computer would only recognize two of those monitors, and the only way to get it to "de-recognize" the second monitor and recognize the third monitor was to physically disconnect the second monitor.
I did say when you want to connect three monitors to 5x70's there are some rules to adhere to. These are covered in the first two apple docs mentioned above, or by title:
Mac Pro (Mid 2010), Mac Pro (Early 2009): Issues with three displays and multiple DVI, HDMI connections
Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
The general gist of these rules is that to drive three monitor son a 5x70 you need two active adapters. That is why one of your monitors was disabled when you tried to add a third.
Here's a good explanation of what's going in here and why you need two active adapters on these cards:
Active vs. Passive Displayport adapters *the truth*
If you use DVI monitors and any of them have resolutions less than 1920 x 1200 then you can use single link active adapters. The "AMD Eyefinity Validated Dongles" chart shows some active (and passive) adapters that are acceptable. For example of a single link DVI active adapter is the Accell B087B-006B. An example of a dual link DVI active adapter would be the one from monoprice.com if you need to connect monitors with a resolution greater than 1920 x 1200.
I'm doubtful that SwitchResX would be able to convince the computer that there were only two monitors connected and direct the second monitor signal to the correct place, but it certainly seems worth a try, so thanks for the idea! Any other ideas are still welcome in the meantime.
I'm not doubtful. It is a very powerful utility for dealing with all aspects of multiple monitor configurations (they call them "Display Sets") complete with forcing EDID information if necessary. The different configurations can be controlled with a (contextual) menu and/or hot key.
SwitchResX is academic at this point if you want to have all three monitors connected. You would need to get that working first. Then use SwitchResX to vary the configuration combinations. So if you go this route the "name of the game" is figure out the active adapters you need.
I only described in general terms above about the adapters since you never said exactly what kind of connections these monitors require (single link DVI, dual link DVI, hdmi, mini-displayport, vga). -
Need to find out how many users are using Siebel Application
Hello all,
I need to find out how many users are using Siebel Application?
Is there a way I can find out?
Thanks.
yasunHi,
Read the following:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor30.html
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor17.html
For full information about server status and statistics red:
http://docs.oracle.com/cd/B40099_02/books/SysDiag/SysDiagSysMonitor.html
T.Abed -
Viewing Canvas Video Feed on a Seperate Monitor through DVI or Component
Hey All,
This is something I have been researching with no simple, possibly cost efficent solution. Basically I would like to view the timeline canvas feed on a seperate monitor without the use of my hvx200. I will be editing in 720p60 and have an 17" hd tv with component and dvi inputs on the way.
I mainly will be using this monitor on productions as a field monitor but I would like to eventually use it as a second monitor on my mac pro to view only the video timeline feed of final cut pro on it, not mirror desktop and have a somewhat fuzzy (sd on a second monitor through mirroring always seems degraded).
I have looked at possible devices like the matrox and blackmagics pci cards to either sdi (which I dont have) hdmi and such but those start at $1000, a great deal of money I do not have at the time.
I would think that since the monitor has both a vga 15pin and digital dvi input there either has to be an option in fcp I have not seen or a device that I have not found.
Any help would be greatly appreciated,
Thanks again for everything,
TimLook at the back of your mac and see if you have two monitor ports on your video card. Depending on the type of card you should be able to connect to your HD monitor as a second screen and then setup FCP to put external video on the digital cinema desktop.
I am using a siimilar setup, using a Dell Ultra-Sharp flatscreen as both my second computer monitor and my external video. The Dell's have DVI, VGA, component, S-video, and composite inputs, but right now I'm just using the DVI and FCP switches the video back and forth when I turn on external video.
Hope this helps -
Max Average -
Enabled monitor through override not visible in custom management pack
Hello Everyone,
I've this requirement to enable a monitor which is disabled by default in its source sealed management pack. Using following article; via override; I enable the monitor and place it into a custom unsealed management pack.
https://technet.microsoft.com/en-au/library/hh212818.aspx
Now when I try creating subscription based on that monitor; and select the custom unsealed management pack; that monitor is not listed/available. However, this same monitor which is turned enabled by override; is listed; if its parent sealed management pack
is selected.
Questions:
1) Would selecting this monitor from its sealed management pack; safe to assume this monitor is now enabled?
2) Is this default behavior for monitors turned enabled via override?
Please provide input to this, how an enabled monitor through override can be referenced to be used? Thank you.1) If the override is done properly, yes, it is enabled. You can check that it is actually enabled by opening the health explorer of an object targeted by this monitor : it should be green/yellow/red instead of blank when it was disabled
2) It is the default behavior. What happens is that you store the override (just a parameter that says "ok, the monitor is now enabled") in the unsealed management pack, not a copy of the actual monitor. -
Spool Error Monitoring through CCMS not available in Standard Delivered MTE
Hi Everyone,
My Client requirement is to monitor SPOOL Errors through CCMS. But Standard Monitoring Tree Elements (MTEs) does not capture the Spool Errors .
Can anybody Please let me know , How Can I setup Spool Error Monitoring through CCMS.
Thanks & Regards
Deepak GosainDeepak,
Check this One...
//help.sap.com/saphelp_nw70/helpdata/en/34/658a3b15566262e10000000a11402f/content.htm]
Hope this Helps....
Happy Learning
Chander N Purna -
How to test the Siebel Applications ? (very urgent and important)
**Hi Pals,**
**I am suresh from Noida, I work for GLS in Testing department.Presently we have a project of Siebel Analytics (OBIEE).We hav to test the siebel applications now.I kindly request u all to clarify my doubts regarding this.**
**1.What is Siebel or OBIEE testing ?**
**2.How to test these applications ?**
**3.Basic process of Siebel testing ?**
**4.Tools Used to test these applications ?**
**5.What is STA (Siebel Testing Automation) ?**
**6.Where can I find the usefull documents relating to this.**
**Help me out guys, it's very important and urgent.I will be very much thank full to u all if u do the same.....Anticipating a quicker response.**
**Thank u.**Welcome to the [top 10|http://forums.oracle.com/forums/thread.jspa?messageID=3928667#3928667]!
Cheers,
C.
PS: [http://catb.org/~esr/faqs/smart-questions.html] -
BI Publisher cannot be generated in Siebel Application
Hi Experts,
I have an issue in BIP. When I try to generate the report in SIebel Application. The report cant generate and this is the prompt message appears:
"Failure mechanism of BI Publisher to generate the report. (SBL-RPT-50524)".
But when I get the XML generated by that specific report which I ran and then try to generate it locally using BIP Desktop, the report is generated.
[ERROR] End Memory: max=493MB, total=492MB, free=249MB
[010413_113037983][][EXCEPTION] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(Unknown Source)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
at oracle.apps.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:70)
at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:326)
at oracle.apps.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:97)
at oracle.apps.xdo.servlet.ReportImpl.renderBody(ReportImpl.java:522)
at oracle.apps.xdo.servlet.ReportImpl.renderReportBody(ReportImpl.java:83)
at oracle.apps.xdo.server.impl.DefaultReport.run(DefaultReport.java:44)
at oracle.apps.xdo.webservice.v11.PublicReportServiceImpl.generateReport(PublicReportServiceImpl.java:307)
at oracle.apps.xdo.webservice.v11.PublicReportService.runReport(PublicReportService.java:231)
at sun.reflect.GeneratedMethodAccessor143.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:351)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'ref' used but not declared.
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
... 44 more
[010413_113037983][java.lang.String][EXCEPTION] java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at oracle.apps.xdo.common.xml.XSLT10gR1.invokeNewXSLStylesheet(Unknown Source)
at oracle.apps.xdo.common.xml.XSLT10gR1.transform(Unknown Source)
at oracle.apps.xdo.common.xml.XSLTWrapper.transform(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.fo.util.FOUtility.generateFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.createFO(Unknown Source)
at oracle.apps.xdo.template.FOProcessor.generate(Unknown Source)
at oracle.apps.xdo.servlet.RTFCoreProcessor.transform(RTFCoreProcessor.java:70)
at oracle.apps.xdo.servlet.CoreProcessor.process(CoreProcessor.java:326)
at oracle.apps.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:97)
at oracle.apps.xdo.servlet.ReportImpl.renderBody(ReportImpl.java:522)
at oracle.apps.xdo.servlet.ReportImpl.renderReportBody(ReportImpl.java:83)
at oracle.apps.xdo.server.impl.DefaultReport.run(DefaultReport.java:44)
at oracle.apps.xdo.webservice.v11.PublicReportServiceImpl.generateReport(PublicReportServiceImpl.java:307)
at oracle.apps.xdo.webservice.v11.PublicReportService.runReport(PublicReportService.java:231)
at sun.reflect.GeneratedMethodAccessor143.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:397)
at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:186)
at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:323)
at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32)
at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118)
at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83)
at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:454)
at org.apache.axis.server.AxisServer.invoke(AxisServer.java:281)
at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:699)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:351)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'ref' used but not declared.
at oracle.xdo.parser.v2.XSLProcessor.reportException(XSLProcessor.java:806)
at oracle.xdo.parser.v2.XSLProcessor.newXSLStylesheet(XSLProcessor.java:571)
... 44 more
Thanks,Hi ,
Please review
BI Publisher - XML-22008: Namespace prefix 'ref' used but not declared (Doc ID 1434957.1)
Does it help ?
Regards.
Phil -
Using monitor through tape deck
I want to use an LCD tv I have for an external video monitor. I have a Sony HVR-M15 deck connected by fire wire to my Mac. I have RCA, S-video and Component outputs on the deck. I can playback tapes on the external LCD monitor through the deck but how do I use it as a Full quality playback monitor in FCP?
I can playback tapes on the external LCD monitor through the deck but how do I use it as a Full quality playback monitor in FCP?
Isn't that what you're doing already?
-DH -
Why T430 connect with monitor through VGA can only have 60 fps refreash rate?
I have a T430 and T420.
When I connect the T420 with monitor through VGA, the refreash rate of the monitor can be 75 fps in 1600*900. But When I connect the T430 with the same monitor through VGA, the refresh rate can only be 60 fps, no 75 fps option in the list, Anybody has idea why it works like this?
Thanks very much.Actually, on second thought, does the external monitor show up as "Generic PnP monitor" in Device Manager? Or does it show up as the correct model number?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
What is the use of notes button in the Service Request field in Siebel Application?
Hi,
I have an doubt with the "Notes" tab in Service request field of Siebel Application.
Can you please explain me about this tab.
Thanks
ThriveniSometimes 255 characters is not enough and with the Notes you can add more text.
And from a performance perspective it is better to make the Notes a seperate Tab, so it only gets retrieved when explicitly needed.
Maybe you are looking for
-
Messages in TBD status in RWB IE message monitoring
Hi I have messages in TBD status in RWB message monoitoring and log version of messages displayed in SXMB_MONI. I understand that restarting XI_AF_MESSAGING from NWA will flush out the queue , However would like to understand 1. Once flushed out, wi
-
Late 2013 Macbook Pro Retina 13'' Power Issues
I'm having a really hard time diagnosing if I'm even suffering from this problem or not. I have the Mac Book Pro 13" Retina Display 8 GB / 512 GB model and having the POWER problem. This issue came after updating OS X MAVERICKS . Some time it work
-
Itune wouldnt open. so i tried deleting it and reinstalling it. Whenever i try and reinstall it says 'apple mobile device...' and asks if i have 'sufficient privelidges to run the program' or something along those lines Please help!!
-
Advance payment before creating sales order
Hi, Customer pays advance (Rs.100/- to Rs. 1000000/-)i.e he deposits the amount in bank & shows the receipt. Then sales order is created but order value should not exceed this deposited amount. How to go about.
-
I'm new to Motion 5 (making the transition from FCP 7 to X) and trying to create a simple five second long title that fades in in one second (30 frames) and fades out in the last one second (30 frames). I created the title and added the basic motion