Siebel-BIP Integration error

Hi,
I 'm trying to configure the BI Publisher with Siebel CRM.I did most of the stuff except setting up BI Publisher security.
I logged into BIP using 'Administrator' and went to Admin->Security Configuration. I directly went to Security model section and set 3 proprties as per the document specified.
Security model: Siebel Security
Siebel Web Service End Point: http://10.151.101.201/eai_enu/start.swe? SWEExtSource=WebService&SWEextCmd=Execute
Administraor username/pwd : sadmin/sadmin.
Apart from above I have not given any thing under Local Super user credentilas not even checked this. Now when I restarted the service and tried to login using the same user 'Administrator', it is giving errormessage
'The server cannot be used due to configuration error, please contact the Administrator. if you are the administrator please contact the BI Publisher user guide'
So I have reverted back the xmlp-server-config.xml file to atleast successfully log into BIP. I even tried to uplaod the report from Siebel to BIP, but have no luck and recive the Siebel error messages
Invalid BI Publisher Security Model settings (SBL-RPT-50532)
Object Manger Error:[0] Invalid BI Publisher Security Model settings (SBL-RPT-50532)
Error(null) invoking method "(null)" for business service"(null)"
what I feel for the above errors might be not settingt the proper security model. Kindly let me know what are the exact properties that I need to set under BI Publisher security section.
Thanks,
Ravi

Similar Messages

Siebel - BIP Integration not working

Hi,
We are currently integrating Siebel 8.0.0.8 and BIP 10.1.3.4.1. Siebel - BIP Integration is not working. When we try to upload reports from Report Template Registration view, following error messages are displayed:
[1] [0] Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308) (IDS_EAI_WS_OD_FAULT)
[2] Object manager error: ([0] Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308) (IDS_EAI_WS_OD_FAULT))
[3] Error (null) invoking method "(null)" for Business Service "(null)"
In the XMLP log, following are the details for this transaction:
EAITransport     EAITransportDebug     4     000000624c512bf8:0     2010-07-29 14:13:51     *** HTTP Transport Parameters:
EAITransport     EAITransportDebug     4     000000624c512bf8:0     2010-07-29 14:13:51     Request URL = http://167.238.136.65:9705/xmlpserver/services/PublicReportService_v11
EAITransport     EAITransportDebug     4     000000624c512bf8:0     2010-07-29 14:13:51     Request Method = POST
EAITransportPerf     EAITransportPerf     5     000000624c512bf8:0     2010-07-29 14:13:51     Created Request Connection|0
EAITransport     EAITransportGeneric     3     000000624c512bf8:0     2010-07-29 14:13:51     Sending Request
EAITransport     EAITransportDebug     4     000000624c512bf8:0     2010-07-29 14:13:51     *** HTTP request Headers for Data Send Request:
User-Agent: Mozilla/4.0
Accept: text/*
SOAPAction: ""
Connection: close
Content-Type: text/xml; charset=UTF-8
EAITransport     EAITransportDebug     4     000000624c512bf8:0     2010-07-29 14:13:51     HTTP response Headers from Data Send request HTTP/1.1 500 Internal Server Error
Any suggestions??

Hi, I'm getting something very similar when trying to upload standard OR custom reports. I have an SR open with Oracle currently. I'll let you know what I find out. Does anyone else have a suggestion?
ObjMgrLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(httptransport.cpp (1631)) SBL-EAI-04117: HTTP Request error during 'Submitting Data SendHTTP request': 'Status code - 500'
ObjMgrLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(httptransport.cpp (981)) SBL-EAI-04117: HTTP Request error during 'Submitting Data Send HTTP request': 'Status code - 500'
ObjMgrLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(soapbinding.cpp (564)) SBL-EAI-04304: Unknown Part ':oracle.apps.xdo.webservice.exception.OperationFailedException' for operation 'uploadReport' exists in SOAP message.
ObjMgrBusServiceLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(outdisp.cpp (214)) SBL-EAI-04308: Operation 'uploadReport' of Web Service 'http://xmlns.oracle.com/oxp/service/v11/PublicReportService.PublicReportServiceService' at port 'PublicReportService_v11' failed with the following explanation: "oracle.apps.xdo.webservice.exception.OperationFailedException: PublicReportService::executeUploadReport Failure: Due to unable to create new Report as AbsolutePath [SiebelCRMReports/Quote - Standard/Quote - Standard.xdo] due to java.util.zip.ZipException: error in opening zip file".
ObjMgrBusServiceLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(xmlpadaptersvc.cpp (1544)) SBL-EAI-04308: Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".
ObjMgrBusServiceLog,Error,1,000002ee4c762608:0,2010-08-26 10:39:06,(xmlpdriversvc.cpp (567)) SBL-EAI-04308: Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".
GenericLog,GenericError,1,000002ee4c762608:0,2010-08-26 10:39:06,Object manager error: ([0] Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308) (IDS_EAI_WS_OD_FAULT))
GenericLog,GenericError,1,000002ee4c762608:0,2010-08-26 10:39:06,( (0) err=2818155 sys=2298068) SBL-OMS-00107: Object manager error: ([0] Operation '<?>' of Web Service '<?>.<?>' at port '<?>' failed with the following explanation: "<?>".(SBL-EAI-04308) (IDS_EAI_WS_OD_FAULT))
GenericLog,GenericError,1,000002ee4c762608:0,2010-08-26 10:39:06,(bsvcmgr.cpp (1384) err=2818251 sys=0) SBL-OMS-00203: Error 2298068 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
GenericLog,GenericError,1,000002ee4c762608:0,2010-08-26 10:39:06,(bsvcmgr.cpp (1227) err=2818251 sys=0) SBL-OMS-00203: Error 2298068 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
GenericLog,GenericError,1,000002ee4c762608:0,2010-08-26 10:39:06,(smireq.cpp (425) err=2818251 sys=0) SBL-OMS-00203: Error 2298068 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
TaskConfig,TaskCfgParamError,1,000002ee4c762608:0,2010-08-26 10:39:06,***********Dumping Parameters for the current task (22020129) because of errors**********

Siebel BIP Integration Objec for Parent, Child and Grand Child

Hi,
I 'm trying to create a one report for displaying Parent, Child and Grand Child.
Service Request
- Quote
- Quote Item.
Successfully create the BIP Integration object and generated the xml file. problem here is when trying to include the fields in BIP desktop word, not able to see the grand child fields, could see only the parent and child fileds and for grand child only 'ListOfQuoteItem' text.
Could some one please let me know the reason for this behavoir and wherther BIP supports 3 levels.
Is there any Out of Box Siebel report showing parent, child and grandchild.
Thanks,
Ravi kanth

One Siebel Adapter Upsert operation should be sufficient to insert the parent and child. In the Integration object definition, you define the Template child instances with the Parent of Template. i.e
You define Template first as an Integration Component and then define
Template child instances to have a Parent as Template.
Thanks
Swarna

Question about siebel bip integration configuration

Hi,
I'm new to siebel enviornment, I installed siebel and try to configure bip integration part
Step 1:
I stoped siebel services, and then I copied the siebel srf file to siebel tools driectory and then imported pix files and compiled it
and then I try to configure outbound service, deleted existing xmpl integration files and imported wsdl file and then i compiled. Now My quesiton is Before start the siebel service, should i copy compiled srf file to siebel server directory and start the server using by this srf ? and then configure inbound service

Yes, you need to copy the compiled srf file to the objects/<language> folder of the Siebel Server.
Check Doc ID 546999.1 on support.oracle.com to find further information about repositories and changes to the repository.
Hope it helps,
Wilson

FRM-41211 Integration Error SSL - OracleAS 10g

Hi.
I have error Frm-41211 Integration Error SSL Failure Running Another Product error while calling a report from web form in oracleAS 10g.
I have problem with RUN_REPORT_OBJECT in web forms.
I have error: FRM-41211 SSL integration error .....
OracleAS server began on Windoes XP SP2.
Do you help me ?

Hi,
I remember having seen this issue in teh apst. My best recommendation is to work with customer support (metalink.oracle.com)
Frank

FRM-41211 Integration Error SSL - Oracle Forms 10g

Hi all.
I have FRM-41211 Integration Error SSL Failure Running Another Product error while calling a report from web form in oracleAS 10g.
I have problem with RUN_REPORT_OBJECT in web forms in this code:
=====================================================
DECLARE
BEGIN
repid := find_report_object('MODULE21');
v_rep := RUN_REPORT_OBJECT(repid);
-- jobid := substr(v_rep, length('rep60_WS70004')+2, length(v_rep));
-- web.show_document('/reports/rwservlet/getjobid'||jobid||'?server=rep3945','_blank');
END;
=====================================================
I have error: FRM-41211 SSL integration error .....
OracleAS 10g server began on Windows XP SP2.
Do you help me ?
Very thanks !!

Do you help me ?
Thanks.

FRM-41211: Integration Error: SSL failure running another product Error

Hai,
I am developing POS Application in Oracle(Forms6i/Reports6i). I design the Invoice Print Format in Reports6i and call from the Invoice Form. When the
user save the Invoice I Commit the Invoice and call the Invoice Report for Printing Immediately. I use Epson TM U210B Label Printer for Billing. Sometimes the Invoice Print is not coming in the Printer and it gives the
following error(especially the First print after restart the computer).
FRM-41211: Integration Error: SSL failure running
another product
After that if you print further for transaction no plm. only it gives the error first time of print
So Please give the solutions immediately. I am waiting for Ur favourable Reply.
Ur's Shahul

As Petr said make sure you're reports25_tmp is set in your registry and that the directory exists AND you have the rights to write to that directory.
You can also get this error if you try to issue a 2nd asynchronous run_product call to run a report and there is another one running. For this, Oracle has two 'solutions'.
1) Do not run more then one asynchronous report per session
or
2) Use a delay loop before calling the next report.
It's been my experience that #2 is worthless as, if it works, is doing pretty much the same thing as #1. I really hope this gets fixed (for good) at some point...somehow. <G>
Chad

Run report --- Integration Error ----SSL failure

I have a form that call a report through the Run_Product Built, this works fine on Developer 6 version, but after I upgraded to 6i, everytime I press the buttonn that call the report, an error message will appear that say "FRM-41211 Integration Error SSL failure running another product" after the Report Background Engine appeared. And the report will not start.
But if I press the button again, all will be fine.
Does anyone know what happens ?
PLease help!!!!

It is a bug in Forms 6i and possible workaround (from Metalink) is:
WORKAROUND as follows :
This brings up the Background Engine on startup and minimizes it.
1. Create a shortcut for rwrbe60.exe and do a CTRL+C to copy it.
2. Right click on the TASK BAR at the bottom of the screen and get the TASKBAR
Properties box up.
3. Select ADVANCED
4. Expand Tree for PROGRAMS.
5. Click of STARTUP folder.
6. Do a CTRL+V to Paste in the Shortcut to rwrbe60.exe.
7. Right Click on Shortcut and select Properties.
8. Click Shortcut Tab.
9. Make sure of the following fields are as follows:
TARGET : {drive}:\{path}\rwrbe60.exe /c
START IN : Is the location of your Reports and Forms.
SHORTCUT KEY : None
RUN : MINIMIZED

Integration error SSL failure running another product. - Urgent

Anybody knows what could be the possible problem and how to solve it. This error is coming when I am running RUN_PRODUCT built-in forms 6i, that application was running for 2 years in Forms 5, without any problem.
I have included the message what Forms doucmentaion had.
FRM-41211: Integration error: SSL failure running another product.
Cause: There is a problem detected when launching another product.
Action: Check the RUN_PRODUCT built-in.
Level: 99
Type: Error
null

I got this error when I was using 4.5, it may be caused by the
correctness of report_path in registry.
Regards,
George
Anybody knows what could be the possible problem and how to solve it. This error is coming when I am running RUN_PRODUCT
built-in forms 6i, that application was running for 2 years in
Forms 5, without any problem.>I have included the message what
Forms doucmentaion had.>FRM-41211: Integration error: SSL
failure running another product.>Cause: There is a problem
detected when launching another product. >Action: Check the
RUN_PRODUCT built-in. >Level: 99 >Type: Error >null

Integration error SSL failure running another product

Dear All,
I am facing some problem while running reports from forms
SERVER:
•     OPERATING SYSTEM: Windows.8
•     Database: ORACLE 11g
•     Forms & Reports = 6i.
In form when click any report button to call report some time error comes.
FRM-41211: integration error SSL failure running another productAnd user can not print the report,

Forms/Reports 6i on Windows 8? I very much doubt that this is going to work. The last supported OS for Forms/Reports 6i was Windows XP.
You might have some luck with a non-supported workaround:
http://windows7bugs.wordpress.com/2012/08/25/windows-8-oracle-developer-suite-6i-patch-18/

Integration Error:SSL failure running another product.In DeveloperSuite 10g

I'm using DeveloperSuite 10g. I'm trying run the report from Forms but when I'm
clicking on button to run report using RUN_REPORT_OBJECT I'm getting following
error :
Integration Error : SSL failure running another product.
Can any one explain why I'm getting this error.
Regards
Alpesh.

Hi alpesh
I think you are good at oracleDS 10g and it is running on your machine successfully. But I am not able to run any form on my system.
My OS is Win XP with service Pack 2
Installed Oracle Database 10g
Installed Oracle DS 10g
Able to run reports on paper layout and web layout, But can not run forms. Error is shown on the IE Ver 7. Only source code is displayed. can you help me out from this.

Forms / Reports 6i - slow starting printing & FRM-41211 Integration error

We are having a problem with Forms / Reports 6i that seems to be slowly getting worse.
When beginning printing, the CPU usage goes up to 100%. In task manager I can see IFRUN60.EXE or RWRBE60.EXE, or IFBLD60.EXE or RWBLD60.EXE taking up 70% or so of the CPU time with the rest being taken up by the SPOOLSV.EXE spooler service.
This can be observed when
* Starting the Reports background generator from the Forms runtime
* Printing from a "print form" function inside the Forms runtime
* Starting Reports builder
* Printing from Reports Builder
* Printing from Forms Builder
The big problem is launching Reports from the Forms runtime. If this CPU / Spooler wheel spinning takes more than 30 seconds or so (and it can on slower machines), Forms thinks that it has failed to launch Reports and gives the error "FRM-41211 Integration error: SSL failure running another product" Eventually the reports background generator will finish launching.
This happens on NT 4, 2000, XP, and 2003 server. I have tried this in a "clean" configuration where nothing else (no extra services or anything) is running at all and this still happens. We are currently running Forms & Reports Patchset 17.
Does anyone have any idea what is causing this? Thanks.

More info:
This is one of the lines that is calling the report:
RUN_PRODUCT(REPORTS, 'ORDER_PRINT.RDF', SYNCHRONOUS, BATCH, FILESYSTEM,ORDER_ID,'');
Here is another one:
RUN_PRODUCT(REPORTS
,'OE_AUTO_QUOTE'
,SYNCHRONOUS
,RUNTIME
,FILESYSTEM
,ORDER_ID
We have a client/server setup. We are running 6i forms and reports, with a 9 database.
There have been no changes to these forms or reports. And it doesn't happen all the time. It just happens every-so-often.
EDIT - I guess it has been doing this for the past 3 weeks. One user says it happens everytime she tries to print anything from a form......
I've searched the forum about this and there are a lot of unanswered questions. I'm thinking my chances are slim on figuring this out.
2nd EDIT - I looked at the documentation at
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164945.1
everything seems to be right - according to that. So I'm wondering if this has anything to do with any sort of networking issues.....
.....3rd EDIT........
Still searching. It looks like this person has the same problem. http://www.webservertalk.com/archive149-2005-11-1283220.html
Having problems with the rwrbe60.exe
I'm wondering if there was some sort of patch Microsoft let out that is causing this issue?
null
Message was edited by:
loweride

FRM-41211 integration error

When we are calling Oracle report builder 6i report from Oracle forms 6i first time it gives us a FRM-41211 integration error. It's urgent.

hi
the problem in u r code please check u r run_product();
and also try something like this.
Errors
FRM 41211 Integration Error: SSL Failure Running Another Product.
Symptoms
"Frm-41211 Integration Error Ssl Failure Running Another Product" error while calling a report from form that is invoked by a shortcut place in the desktop. The Form runs fine when running from forms builder.
Cause
This is caused by the incompatibility introduced by the shortcut settings in XP.
Fix
In the Properties of the shortcut goto Compatibility-->Compatibility Mode tab. There uncheck the "Run this program in compatible mode for..." option. This will revert the default compatibility. This solves this issue. . sarah

Forms Crashing FRM-41211 Integration Error (6i)

In the last week, almost all of our sales reps have had their screens crash when they exit their order screens. When they exit the screen, it is supposed to print the orders they entered.
This also happens in other screens when they are trying to print.
Here is the Microsoft error that comes up first:
Then it gives the Forms error
FRM-41211 Integration Error. SSL failure running another product.
Our department has been working on this issue for a week. I just found out about it and was wondering if y'all had any suggestions....
Thank you for any assistance
PS - there has been no change in the clients, and I'm not aware of any changes with the servers. At least, that is what the Admin says.
Message was edited by:
loweride

More info:
This is one of the lines that is calling the report:
RUN_PRODUCT(REPORTS, 'ORDER_PRINT.RDF', SYNCHRONOUS, BATCH, FILESYSTEM,ORDER_ID,'');
Here is another one:
RUN_PRODUCT(REPORTS
,'OE_AUTO_QUOTE'
,SYNCHRONOUS
,RUNTIME
,FILESYSTEM
,ORDER_ID
We have a client/server setup. We are running 6i forms and reports, with a 9 database.
There have been no changes to these forms or reports. And it doesn't happen all the time. It just happens every-so-often.
EDIT - I guess it has been doing this for the past 3 weeks. One user says it happens everytime she tries to print anything from a form......
I've searched the forum about this and there are a lot of unanswered questions. I'm thinking my chances are slim on figuring this out.
2nd EDIT - I looked at the documentation at
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=164945.1
everything seems to be right - according to that. So I'm wondering if this has anything to do with any sort of networking issues.....
.....3rd EDIT........
Still searching. It looks like this person has the same problem. http://www.webservertalk.com/archive149-2005-11-1283220.html
Having problems with the rwrbe60.exe
I'm wondering if there was some sort of patch Microsoft let out that is causing this issue?
null
Message was edited by:
loweride

Error : FRM-41211 : Integration Error: SSL Failure Running Another Product

Hi All
I am using Forms & Reports 10g.
I have a report .And i am trying to call in my forms and also i am passing parameters.
But i am getting this error :
My Code is :-
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
Add_Parameter(PLid, 'P_Block', Text_Parameter, :block_query.item_block);
Add_Parameter(PLid, 'P_Category', Text_Parameter, :block_query.item_category);
Add_Parameter(PLid, 'P_Dept', Text_Parameter, :block_query.item_dept);
Add_Parameter(PLid, 'P_Floor', Text_Parameter, :block_query.item_floor);
Add_Parameter(PLid, 'P_IP', Text_Parameter, :block_query.item_ip);
Add_Parameter(PLid, 'P_Room', Text_Parameter, :block_query.item_room);
Add_Parameter(PLid, 'P_Userid', Text_Parameter, :block_query.item_usr_id);
Add_Parameter(PLid, 'PARAMFORM', Text_Parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT_Query');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://A_F2_ITT_PC_4.AAHOS.LOCAL:8890/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
*'||'server=Report_server_name&P_parameter='||'&block='''||:block_query.item_block*
*||'&category_name='''||:block_query.item_category*
*||'&dept='''||:block_query.item_dept*
*||'&floor='''||:block_query.item_floor*
*||'&ip_address='''||:block_query.item_ip*
*||'&room='''||:block_query.item_room*
*||'&usr_id='''||:block_query.item_usr_id*
*||'&paramform=no');*
End;
And the error i am getting is :- FRM-41211 : Integration Error: SSL Failure Running Another Product

hi
please try something like this.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
vParamValue number;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
add_parameter(plid,'p_parameter',text_parameter,to_char(:block.item));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT6');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://Machine_Name:8889/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
'||'server=repserver&P_parameter='||:block.item||
'&paramform=no');
END;

Siebel-BIP Integration error

Similar Messages

Maybe you are looking for