Siebel Database Configuration Wizard closes automatically

hi all,
Siebel Database Configuration Wizard closes automatically at step when asked if the GRANTUSR.SQL script was alredy run. Before running the Wizard I already installed the Siebel Enterprise, Siebel Gateway, Siebel Server, SWSE Logical Profile and configurated them. The Siebel Database is available, tablespaces were created and I run the grantusr.sql and everything was OK.
I chose the option 'already run the grantusr.sql'. By doing this the Wizard closes automatically. No idea what's going on here.
Can anybody please help me? I've been sitting for hours trying to find out what happens.

hi WSiebel,
thanks for the explanation. I checked the logfile under \siebsrvr\log:
2021 2012-04-08 20:35:05 0000-00-00 00:00:00 +0200 00000000 001 003f 0001 09 sw_cfg_util 1524 2812 D:\sba80\siebsrvr\log\sw_cfg_util.log 8.0 [20405] ENU
NameServerLayerLog     Error     1     000000024f8105f4:0     2012-04-08 20:35:05     Unable to connect to the gateway server.
GenericLog     GenericError     1     000000024f8105f4:0     2012-04-08 20:35:06     NSS - ErrCode 5009 SysErr 0
GenericLog     GenericError     1     000000024f8105f4:0     2012-04-08 20:35:06     Validation failed : C028: Connection with Siebel-Gateway-Namenserver 粑GenericLog     GenericError     1     000000024f8105f4:0     2012-04-08 20:35:06     ValidateFailed for Gateway Nameserver-Adresse, error : C028: Connection with Siebel-Gateway-Namenserver 粑NameServerLayerLog     Error     1     000000024f8105f4:0     2012-04-08 20:35:17     Unable to connect to the gateway server.
GenericLog     GenericError     1     000000024f8105f4:0     2012-04-08 20:35:17     NSS - ErrCode 5009 SysErr 0
GenericLog     GenericError     1     000000024f8105f4:0     2012-04-08 20:35:17     Validation failed : C028: Connection with Siebel-Gateway-Namenserver 粑GenericLog     GenericError     1     000000024f8105f4:0     2012-04-08 20:35:17     ValidateFailed for Gateway Nameserver-Adresse, error : C028: Connection with Siebel-Gateway-Namenserver 粑NameServerLayerLog     Error     1     000000024f8105f4:0     2012-04-08 20:35:21     Unable to connect to the gateway server.
GenericLog     GenericError     1     000000024f8105f4:0     2012-04-08 20:35:21     NSS - ErrCode 5009 SysErr 0
GenericLog     GenericError     1     000000024f8105f4:0     2012-04-08 20:35:21     Validation failed : C028: Connection with Siebel-Gateway-Namenserver 粑GenericLog     GenericError     1     000000024f8105f4:0     2012-04-08 20:35:21     ValidateFailed for Gateway Nameserver-Adresse, error : C028: Connection with Siebel-Gateway-Namenserver 粑
I don't think, that that is the cause of my problem. Even when I started the Siebel gateway, the database configuration wizard doesn't work appropriately.
Sievel server and Oracle Database are in the same machine (a Windows XP Professional, 32-bit-virtual machine). I haven't installed the Oracle 10g Enterprise edition. Should I install the Oracle client as well?.
In my case the ODBC connection, the DSN Name is Enterprise Name_DSN: Siebel_test_DSN and points to the Driver: Oracle in OraDb10g_home3. The connection works for siebel/siebel, sadmin/sadmin, but not for sys/mypassword (sorry I am not a Database crack).
I also tested the connection with the odbcsql as in your email indicated. The connection works when trying with siebel/siebel and sadmin/sadmin (user/password).

Similar Messages

Siebel database Configuration wizard unable to identify index tablespace

Hi,
I'm installing Siebel CRM 8.1.1 on AIX platform. We have RAC enabled database at backend and in that two tablespace has been created, one for data and another one for index. Now in the database configuration wizrd where we have to provide the name of both tablespaces; we provide the name of data tablespae in the Table Tablespace filed and index tablespace in the index tablespace filed of the configuration wizard. Now when we click on the next button. The configuration wizrd gives error of unable to identify index tablespace.
Why is this happening as index tablespace is properly created in the database. Please help me in this. You quick respance will be highly appriciated.
Regards,
Abbasi

I thought it might be. grantuser.sql generally needs to be modified to suit the underlying database configuration. Glad you got it working.

ODBC failure at siebel database configuration

Hi all,
I am installing siebel 7.8.2 in my system. I am using oracle 10g...
I have installed siebel gateway name server .
After siebel server installation and configuration,
I was checking for ODBC connectivity as given in manual but i am getting the following error:
Cannot validate username/password combination.
HY000: [DATA direct] [ODBC Oracle Driver][Oracle] Ora-12538: TNS: no such protocol adapter
further details are:
I have installed Oracle 10g application server(both oracleasinfra and oracleasmidtier)... my oracle_home is oracleasinfra... and my running listener is also infrastructure listener... and my siebel database where i have run grantusr.sql script is also database which is in oracleasinfra...
Please help me out?

Hi all,
I am installing siebel 7.8.2 in my system. I am using oracle 10g...
I have installed siebel gateway name server .
After siebel server installation and configuration,
I was checking for ODBC connectivity as given in manual but i am getting the following error:
Cannot validate username/password combination.
HY000: [DATA direct] [ODBC Oracle Driver][Oracle] Ora-12538: TNS: no such protocol adapter
further details are:
I have installed Oracle 10g application server(both oracleasinfra and oracleasmidtier)... my oracle_home is oracleasinfra... and my running listener is also infrastructure listener... and my siebel database where i have run grantusr.sql script is also database which is in oracleasinfra...
Please help me out?

Siebel Database Upgrade Wizard fails for production upgrade

Hi,
We are doing a dry-run for production upgrade for our customer form Siebel 7.8.2 to 8.1. 1.4
Platform info:
Siebel Gateway, Siebel Server, Database Server: AIX 6.1 64 bit OS
Database: IBM DB2 V9.7
When running the Upgrade Database (upgrep + upgphys) wizard, the process fails to execute with errors.
Below is the error details:
1.Run the upgrade wizard:
Command: srvrupgwiz /m master_upgrep_prod_782.ucf
[IBM][CLI Driver][DB2/AIX64] SQL0444N Routine "SIEBTRUN" (specific name "SQL120127012149901") is implemented with code in library or path ".../sqllib/function/siebproc", function "siebtrun" which cannot be accessed. Reason code: "4". SQLSTATE=42724
SQLError Statement 0 000000024f2600fc:0 2012-01-30 00:34:05 SQL Statement: {call SIEBEL.siebtrun('SIEBEL.S_ESCL_REQ')}
DBCLog DBCLogError 1 000000024f2600fc:0 2012-01-30 00:34:05
[IBM][CLI Driver][DB2/AIX64] SQL0444N Routine "SIEBTRUN" (specific name "SQL120127012149901") is implemented with code in library or path ".../sqllib/function/siebproc", function "siebtrun" which cannot be accessed. Reason code: "4". SQLSTATE=42724
UpgradeLog UpgradeError 1 000000024f2600fc:0 2012-01-30 00:34:05
[IBM][CLI Driver][DB2/AIX64] SQL0444N Routine "SIEBTRUN" (specific name "SQL120127012149901") is implemented with code in library or path ".../sqllib/function/siebproc", function "siebtrun" which cannot be accessed. Reason code: "4". SQLSTATE=42724
We have raised an SR with Oracle Support and have done the changes suggested and verified the process as per the Bookshelf Installation Guide.
The installations have been verified and the required siebel procedures and functiuons are in place. The upgrade process is still failing.
Has anyone come across this issue. Could you please assist us in identifying the cause of failure. This is pushing back our go-live date. Any help would be greatly appreciated.
Thanks in advance.

Hi,I haven't faced the problem ,but just want to check whether right and supported version of db2 client is installed on the server box.

Siebel Gateway Name Server Configuration Wizard returns "Execution failed"

Hi,
I am installing Siebel 8.1.1.1 on Linux platform and now having problem while trying to configure Siebel Gateway Name Server.
Steps done:
1) DB instance prepared
2) Created Siebel installation image
3) Installed Siebel server and configured Gateway name server (the wizard started automatically as part of the installation). Skip configuration of Enterprise and SWSE Logical profile
4) Ran DB Configuration Wizard for the primary language - successfully. Import repository-add language - successfully.
5) Trying to Wizard "Configure Enterprise" - failed with "Execution failed"
Here I thought that probably Gateway Nameserver was not configured and decided to remove the Gateway and create it from scratch.
Unfortunately this time the Gateway configuration failed. Also with message"Execution failed"
Here are the errors I got in the log files sw_cfg_util*.log
<EF><BB><BF>2021 2012-01-25 16:14:56 2012-01-25 16:14:56 +0200 00000002 001 003f 0001 09 sw_cfg_util 17234 -1215752512 /OraSSO_tstcol/siebapp/server/siebsrvr/log/sw_cfg_util.log 8.1.1 [21111] ENU
GenericLog GenericError 1 000000024f204352:0 2012-01-25 16:14:56 (svrconfig.cpp (2465) err=3023557 sys=0) SBL-CSO-08901: The required arguments are not specified.
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:56 Executing step: CreateGateway
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Step CreateGateway: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%srvrcfg with cmdline -u nouser -p nopassword -r %%SiebelRoot%% -g %%SiebelRoot%%%%OSDirSeparator%%sys%%OSDirSeparator%%siebns.dat::NSFILE: -r %%SiebelRoot%% -a gateway -l %%PrimaryLanguage%% -i %%SiebelRoot%%%%OSDirSeparator%%admin%%OSDirSeparator%%gtwydefs.dat
GenericLog GenericError 1 000000034f20432e:0 2012-01-25 16:14:58 Failed during Execution, err: 5500044
Does anybody know what is the reason?
Searching in Metalink and Google were fruitless..
Thank you in advance.

Just in case anybody bumps in this thread:
The problem in my case was solved according with Oracle Note "Delete and create the "Siebel Server" via Configuration Wizard on Linux, it failed. [ID 880562.1]"
Applies to:
+Siebel CRM - Version: 8.1.1 SIA [21111] and later [Release: V8 and later ]+
Linux x86
Symptoms
Delete the "Siebel Server" once and then create a new "Siebel Server" via Siebel Server Configuration Wizard on Linux, it failed with message "Execution Failed".
The error on sw_cfg_util_xx.log is as follows,
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:33 Executing step: AddSrvrRegistryEntry
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Step AddSrvrRegistryEntry: failed to run program %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl with cmdline -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%%
GenericLog GenericError 1 0000ce524a3a1bd2:0 2009-06-19 10:18:35 Failed during Execution, err: 5500044
Reproduce steps:
- confirm that siebel server was created before, and is stopping.
- create sh env and enter the following command to remove the Siebel Server.
+$ cd $(SiebelServerRoot)+
+$ . ./cfgenv.sh+
+$ cd $(SiebelServerRoot)/bin+
+$ ./ssincfgw+
- select "3 - Remove Existing Configuration".
- complete the configuration wizard.
- enter the following command to create the Siebel Server.
+$ cd $(SiebelServerRoot)+
+$ . ./cfgenv.sh+
+$ cd $(SiebelServerRoot)/bin+
+$ ./ssincfgw+
- select "1 - Create New Configuration".
- continue inputs to finish and execute the configration.
+==> you'll find "Execution Failed".+
Cause
AddSrvrRegistryEntry section shown in the log is the command for registering the Windows Service, and it is no need to execute on Linux env. However, it is executed and it failied.
Solution
You can do either of follows,
+(1) Uninstall and Install the Siebel Server again.+
+(2) The section to execute the Windows registeration command is specified on $(SiebelServerRoot)/admin/common.scm, line 2475-2477.+
+[Step]+
Name = AddSrvrRegistryEntry
Type = RunProg %%SiebelRoot%%%%OSDirSeparator%%bin%%OSDirSeparator%%siebctl ' -r %%SiebelRoot%% -q -S siebsrvr -i "%%SiebelEnterprise%%:%%SiebelServer%%" -a -g "-g %%SiebelGateway%% -e %%SiebelEnterprise%% -s %%SiebelServer%% -u %%Username%%" -e %%Password%% '
So, delete the AddSrvrRegistryEntry section from common.scm, and execute Configuration Wizard again.
Edited by: mmango on Jan 31, 2012 12:21 AM

Database Configuration: Table space does not exist error

Hi all,
while running Database configuration wizard in Siebel 8.0 installation process I receive the following error:
C103: The table\\index space siebelts entered does not exist in your database.Please ensure you entered the correct table\\
index space.
I have verified the following things:
1) Verified in database that, SIEBELTS tablespace is created but not online.
2) grantusr.sql is executed successfully.SADMIN user and SIEBEL table owner accounts are created.
3) SIEBELTS tablespace is assigned as default tablespace for SADMIN and LDAPUSER. There were no problems running the grantusr.sql.
How can it be that the Wizard shows up this error when the grantusr.sql didn't show it?. The problem is the SIEBELTS. The wizard doesn't find it, but it does find the SIEBELINDEXTS tablespace. Checking the last one, it appears online.

this is what I checked as DBA:
SQL> select * from dba_tablespaces where tablespace_name='SIEBELTS';
TABLESPACE_NAME BLOCK_SIZE INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
MAX_EXTENTS PCT_INCREASE MIN_EXTLEN STATUS CONTENTS LOGGING FOR EXTENT_MAN
ALLOCATIO PLU SEGMEN DEF_TAB_ RETENTION BIG
SIEBELTS 8192 65536 1
2147483645 65536 ONLINE PERMANENT LOGGING NO LOCAL
SYSTEM NO AUTO DISABLED NOT APPLY NO
SQL> select * from dba_tablespaces where tablespace_name='SIEBELINDEXTS';
TABLESPACE_NAME BLOCK_SIZE INITIAL_EXTENT NEXT_EXTENT MIN_EXTENTS
MAX_EXTENTS PCT_INCREASE MIN_EXTLEN STATUS CONTENTS LOGGING FOR EXTENT_MAN
ALLOCATIO PLU SEGMEN DEF_TAB_ RETENTION BIG
SIEBELINDEXTS 8192 65536 1
2147483645 65536 ONLINE PERMANENT LOGGING NO LOCAL
SYSTEM NO AUTO DISABLED NOT APPLY NO

Peoplesoft Database Configuration Error

I am trying to install PeopleSoft 8.52 and have gone through the process of installing the Peoplesoft, JRockit JDK, Weblogic and Tuxedo. I am now at the point of tryin to configure the Peoplesoft and now running the PeopleSoft Database Configuration and getting the error message "Database Configuration Wizard does not support the creation of Oracle database on your OS". I first got the error message installing on Windows Vista so decided to install on Windows XP and got the same error message at the same point. Please can someone help me and tell me what I am doing wrong and what I need to do to get past this point and complete the installation. Thank you.

Hi,
You should not forget that you are installing an ERP system, not a desktop application, this requires servers
PeopleTools 8.52 is certified to run on
Microsoft Windows (32-bit) Vista
Microsoft Windows (32-bit) 7
Microsoft Windows (32-bit) 2008
Microsoft Windows x64 (64-bit) Vista
Microsoft Windows x64 (64-bit) 7
Microsoft Windows x64 (64-bit) 2008 R2
Microsoft Windows x64 (64-bit) 2008
Where the last two are usually used to install PIA, Appserver, DB Server and Process Scheduler, which require 64 bits server
The others are usually used to setup workstations for Application Designer, Datamover and SQL Developer access.
So, XP is for sure not certified.
Regards,
Hakan

Configuration Wizard Issue

Hello,
I am executing Configuration Wizard for Automatic Configuration for eTax. It gives errors for certain steps where it refers to particular services which were not present in SR. I have published these services from backend to SR and these are visible in SR now. But these services are not visible in SOA Management ->Business Admin ->Web Service Administration and when I execute Configuration Wizard again it gives me same errors.
Could you please guide me to resolve this?
Helpful answers will be appreciated.
Regards,
Pramod

Solved

Not able to configureODC with database ODC closes automatically

Hi,
i have installed ODC but when i am configuring it with sql database ODC closes automatically. I have reinstalled it several times but issue persist.

Hi,
Please check this url:
https://studio.azureml.net/Home/ViewWorkspace/bc85d4f81d2246c4b1430eb395229a3a?&hashSeg=#Workspaces/Experiments/Experiment/bc85d4f81d2246c4b1430eb395229a3a.f-id.11776ae4400f4c1aa9f58308c30810fa/ViewExperiment
which is an experiment which I created doing save as of the experiment in which the data reader works.
I stripped everything except the data reader and setup the rest of the components...I finally have to write the results back ,so also pulled a Writer component.
Now,the data reader works fine..but the Writer fails:
Error 0071: Incorrect username "acnadmin" or password is passed
Strangely,its the same credentials set in the DataReader.
Looks like all the DataInput/Output components created recently only have the problem.
Once again,while the datareader in this case passes the password in plain text,the writer encrypts,hence fails.

Error while configuring the database connection in sharepoint configuration wizard.Sharepoint 2007.

System
Provider
[ Name]
SharePoint
Products and Technologies Configuration
Wizard
EventID
104
[ Qualifiers]
0
Level
2
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-11-06T02:03:00.000Z
EventRecordID
11054
Channel
Application
Computer
HZNTPMSWSMOS001.NEO-DIAGEO.com
Security
EventData
Failed
to create the configuration database. An exception of type
System.SystemException was thrown. Additional exception information: The trust
relationship between this workstation and the primary domain failed.
System.SystemException: The trust relationship between this workstation and the
primary domain failed. at
System.Security.Principal.NTAccount.TranslateToSids(IdentityReferenceCollection
sourceAccounts, Boolean& someFailed) at
System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection
sourceAccounts, Type targetType, Boolean forceSuccess) at
System.Security.Principal.NTAccount.Translate(Type targetType) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GetMachineRelativeSecurityIdentifier(SPServer
server, Boolean& isMachineAccount) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityAccessToDatabase(SPProcessIdentity
identity, SPDatabase database) at
Microsoft.SharePoint.Administration.SPProcessIdentity.GrantIdentityDatabaseAccess()
at Microsoft.SharePoint.Administration.SPProcessIdentity.Update() at
Microsoft.SharePoint.Administration.SPWindowsService.Update() at
Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder
administrationContentDatabase, IdentityType identityType, String farmUser,
SecureString farmPassword) at
Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
IdentityType identityType, String farmUser, SecureString farmPassword) at
Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder
configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase,
String farmUser, SecureString farmPassword) at
Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at
Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()

Hi,
This issue seems to be a machine Issue. From message is seems that your Computer is not properly connected to Domain. use the steps in the below link and try doing your steps again.
https://support.microsoft.com/kb/162797?wa=wsignin1.0
Regards

P6 EPPM configuration wizard won't connect to database server

I have installed P6 8.3 and Weblogic on one server (application server). On another server SQL is installed. When i run the P6 EPPM Configuration Wizard i get as far as the step 'Database Type & Connection' where i can fill in the details of the server and database to connect to. But then when i press 'next' nothing happens. I don't get any error, but the wizard is not going to the next step. I've tried it with all the options 'Create a new database', 'Upgrade an existing database' or simply 'Connect to an existing database'.
I've read in the documentation that to run the P6 Eppm wizard you need to be on an oracle or sql server, but how can i do that when the necessary files are on another server? As far as i was told it's possible to use two separate servers?
I hope someone can help.

Hi,
JRE 1.8.0_40 is not supported. Please check the tested configurations document for your version, client and browser sheet, uninstall JRE 8 U 40, install a supported version, update the JAVA_HOME, run P6 and try again.
Let me know the results.
Regards,
Pablo
========
Was our answer helpful?
If so, highlight the information for other Community members by rating it or marking the answer as correct.
Just hit the “Correct Answer” link on the answer, or rate it by clicking "Helpful Answer" or "Like".

Problem to specify database access acount in sharepoint configuration wizard

I installed sharepoint 2013 and run configuration wizard. In the page "Specify Confguration Database Settings" and in the section "specify database access acount" I enter my domain admin account user (in DOMAIN\user_name format)
and pass and I'm sure that I enter it correct. but it say "the password specified for the username account is invalid" !!
What's the problem?
Thanks

Normally that means that the password specified for the account is invalid.
Double check the account has been created in AD, that it's unlocked and that the password hasn't been configured to require changing on first use. Ideally grant the account permission to log onto a box somewhere and test it.

Odbc failure for Siebel database server configuration

Hi all,
I am installing siebel 7.8.2 in my system. I am using oracle 10g...
I have installed siebel gateway name server .
After siebel server installation and configuration,
I was checking for ODBC connectivity as given in manual but i am getting the following error:
Cannot validate username/password combination.
HY000: [DATA direct] [ODBC Oracle Driver][Oracle] Ora-12538: TNS: no such protocol adapter
further details are:
I have installed Oracle 10g application server(both oracleasinfra and oracleasmidtier)... my oracle_home is oracleasinfra... and my running listener is also infrastructure listener... and my siebel database where i have run grantusr.sql script is also database which is in oracleasinfra...
Please help me out?

Hi Manuel Dias,
I believe those information would be easily found out through SQL Server 2005 references or guides. There may not have any special needs for B1 database.
Thanks,
Gordon

OIM 11g Server Configuration Wizard Error - Cannot Connect to Oracle DB

I appreciate any and all suggestions or thoughts on how to best continue troubleshooting this error that I am describing below.
I am attempting to install Oracle Identity and Access Management Suite 11g on a Windows 7 machine…in following the installation guides I have successfully installed the following Oracle Components
- Oracle Database 11.2.0.1.0
- Created Schemas using RCU 11.1.1.3.3
- Oracle WebLogic Server 10.3.3.0
- Oracle SOA 11.1.1.2.0
- Oracle SOA 11.1.1.3.0 (Patch Set)
- Oracle IAM SUITE 11.1.1.3.0
Following the above installations, I created a new WebLogic Domain and as the next step am running the OIM Configuration Wizard to configure the OIM Server, however I am unable to setup a connection to the Oracle DB via the OIM Configuration Wizard. I am getting an error message when attempting to setup the connection to the Oracle Database using the OIM 11g Server Configuration Wizard:
ERROR:*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
INST:6102 Unable to connect to the database with the given credentials.
*+[DETAILS] Check the values. Make sure the Database is up and running and connect string, user name, and password are correct.+*
When installing the Oracle Database 11gR2 I used the following install configuration:
Oracle base: C:\MyApps\Oracle
Software location: C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1
Database file location: C:\MyApps\Oracle\DB_HOME\oradata
Database Edition: Personal Edition (3.27 GB)
Character Set: Unicode (AL32UTF8)
Global database name: orcl.dev.com
Administrative Password: Password1
Confirm Password: Password1
When creating my Schemas using RCU 11.1.1.3.3 I used the following Database Connection Details
DB TYPE: Oracle Database
HOST NAME: localhost
PORT: 1521
SERVICE NAME: orcl.dev.com
USERNAME: sys
PASSWORD: Password1
ROLE: SYSDBA
I used a Prefix of “DEV” when creating the schemas so Schema Owners DEV_OIM and DEV_MDS where created. Also, I configured to use the same password for all Schemas: “Password1″. So the password for DEV_OIM and DEV_MDS should be the same, “Password1″.
REPRODUCING THE ERROR
To reproduce the error, when I launch the Oracle Identity Management 11g Configuration Wizard I am first brought to the “Welcome” Screen. I click the [Next>] button.
Next, I am on the “Components to Configure” screen where I select OIM Server and OIM Design Console and click the [Next>] button. (NOTE I have also tested by simply selecting only the OIM Server)
Next, I am on the “Database” screen where I enter the connection information
Connection String: localhost:1521:orcl.dev.com
(NOTE I have also tested using localhost:1521:orcl)
OIM Schema User Name: DEV_OIM
OIM Schema Password: Password1
MDS Schema User Name: DEV_MDS
MDS Schema Password: Password1
When I click the [Next>] button after entering the Database Connection details I encounter the following two errors (1 error for each logon DEV_OIM and DEV_MDS)
INST:6102 Unable to connect to the database with the given credentials.
INST:6102 Unable to connect to the database with the given credentials.
TROUBLESHOOTING
NOTE: I can successfully start the Oracle DB Services and connect via the Enterprise Console, SQL Plus, and JDBCTest Java Client…I just cannot get past this connection error in the OIM Server Configuration Wizard.
JDBCTest.java TEST CLIENT
NOTE: THIS IS THE JAVA TEST CLIENT THAT I AM USING TO TEST DATABASE CONNECTIVITY THRU A SPECIFIED JDBC URL AND DRIVER THAT WORKS SUCCESSFULLY.*
import java.sql.Connection;
import java.sql.DatabaseMetaData;
import java.sql.DriverManager;
import java.sql.ResultSet;
public class JDBCTest {
public static void main(String[] args) throws Exception {
String url = "jdbc:oracle:thin:@localhost:1521:orcl";
String driver = "oracle.jdbc.OracleDriver";
String user = "DEV_OIM";
String password = "Password1";
try {
Class.forName(driver);
Connection conn = DriverManager.getConnection(url, user, password);
// Get the MetaData
DatabaseMetaData metaData = conn.getMetaData();
// Get driver information
System.out.println("");
System.out.println("#########################################");
System.out.println("# ***DRIVER INFORMATION***");
System.out.println("#");
System.out.println("# Driver Name = " + metaData.getDriverName());
System.out.println("# Driver Version = " + metaData.getDriverVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get database information
System.out.println("#########################################");
System.out.println("# ***DATABASE INFORMATION***");
System.out.println("#");
System.out.println("# Database Product Name = " + metaData.getDatabaseProductName());
System.out.println("# Database Product Version = " + metaData.getDatabaseProductVersion());
System.out.println("#");
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get schema information
ResultSet schemas = metaData.getSchemas();
System.out.println("#########################################");
System.out.println("# ***SCHEMA INFORMATION***");
System.out.println("#");
System.out.println("# Schemas:");
while (schemas.next()) {
System.out.println("# " + schemas.getString(1));
System.out.println("#########################################");
System.out.println("");
System.out.println("");
// Get table information
System.out.println("Tables");
ResultSet tables = metaData.getTables("", "", "", null);
while (tables.next()) {
System.out.println(tables.getString(3));
conn.close();
} catch (Exception ex) {
ex.printStackTrace();
*"lsnrctl status" COMMAND TEST SUCCESSFUL*
When the Listener Service is on I get the following output using lsnrctl status command
C:\> lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 21-SEP-2010 15:59:43
Copyright (c) 1991, 2010 Oracle. All rights reserved.
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows:Version 11.2.0.1.0 - Production
Start Date 21-SEP-2010 14:43:57
Uptime 0 days 1 hr. 15 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\MyApps\Oracle\DB_HOME\11.2.0\dbhome_1\NETWORK\ADMIN\listener.ora
Listener Log File c:\myapps\oracle\diag\tnslsnr\\listener\alert\log.xml
Listening Endpoints Summary…
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary…
Service “CLRExtProc” has 1 instance(s).
Instance “CLRExtProc”, status UNKNOWN, has 1 handler(s) for this service…
Service “orcl.dev.com” has 1 instance(s).
Instance “orcl”, status READY, has 1 handler(s) for this service….
Service “orclXDB.dev.com” has 1 instance(s).
Instance “orcl” status READY, has 1 handler(s) for this service…
The command completed successfully

Whenever installing oracle databases, i install the software only first. Then i setup the listener. Then i create a database instance using the dbca tool. This way all the information is added to the pre-existing listener configurations rather than trying to create the listener afterwards. Also, during the dbca database creation, i supply a full service name such as orcl.hostname and use the service name in future configurations where it asked. This usually solves any issues of the listener or database not being found correctly.
-Kevin

Vb 2010 data source configuration wizard and sql server 2012

I am having a problem using the Data Source Configuration Wizard in vb 2010 express to connect to a remote SQL server database. The weird thing is that I can connect to it just fine if I manually dimension the sqlcommand, sqlconnection and set up the sql
connectionstring. So I know the connectivity is possible, but I would like to use the functionality of the Data Source Configuration Wizard.
Here's what happens when I attempt to add a connection via the Database Explorer:
I only get two SQL Server options. Neither will let me connect to a remote database.
I know that Microsoft SQL Server Compact 3.5 isn't what I want, but I have tried it anyway. It will only let me connect to a database on my computer. An 'ActiveSync' option is greyed out.
Microsoft SQL Server Database File would appear to be what I want, but when I select this option, it informs me (as you can see) that this will only work for a local database:
The connection string that I build manually (and which works) looks like this:
Dim
myConn
As
NewSqlConnection(sConnect)
sConnect =
""Data Source=xxxxxx.xxxxxx.com;Server=""Xxxx XXX Database"";Initial Catalog=StockAnalysisProd;User
ID=cadietz;Password = "& sPW &
I have attempted all variation of this string in the database file name input box to no avail. I think it really should go in as a Data Source but those are hard wired and cannot be changed. I'm sure I'm doing something stupid, but I need someone
to point out what it is. Thanks in advance for your help...
Alex3764

Alberto... thanks for your reply.
Unfortunately this does not appear to work. I downloaded Visual Studio Express for the Web (2012) and attempted the 'work around' proposed by Sergey and I could not make it work on the remote server. I have given up on the Data Connection Wizard and
am simply connecting to my remote SQL server using the manual classes (SqlConnection, SqlCommand, SqlDataAdapter, etc.). The moderator has marked this as an answer but I'm going to unmark it.
I am now even more frustrated because I now find that I cannot connect to my LOCAL SQL database using the Data Connection Wizard and the circumstances are even weirder. Here's what happens:
I open the Add Connection window, select 'Microsoft SQL Server Database File (SqlClient)' as the data source.
I then browse to my local database file in the Database file name input box. When I click the 'Test Connection' button I get a message box that informs me: 'Test connection
succeeded'. Voila!
But, alas, when I close the message box and click OK on the Add Connection window I get this message: 'The ability to open this connection is not supported in this edition of Visual Studio'.
I mean this borders on the absurd. Why is the Data Connection Wizard even offered with VB 2010 Express if you can't use it for anything. Once again I can get around the problem manually but I'm getting very frustrated with MS. Any suggestions??
Alex3764

Siebel Database Configuration Wizard closes automatically

Similar Messages

Maybe you are looking for