Siebel Diagnostic Tool (8.1.1.2) - can't log in to DiagTool

Hi all!
I've seen this posted once before, about two years ago, but there was no solution posted then.
I've installed and configured the Siebel Management Agent and Siebel Management Server on a single 8.1.1.2 dev box. All seems to be well with those two components - the logs for both indicate they are talking.
However, when I try to log into the Siebel Diagnostic Tool component of the Server (http://<host>:8080/DiagTool) upon entering my credentials I get:
Unable to load enterprise / server information. Please check the configuration file and try again.
In fact, this error is displayed (in a page called loginUser.auth) IMMEDIATELY after clicking the 'login' button and occurs REGARDLESS of what user name and password I use. I can enter a load of gibberish in either login or password field and I'm immediately presented with this error.
I'm inclined to think this is a Tomcat error, but there are NO logs whatsoever that get appended to when the error occurs. I'm at an absolute loss as to where to look to fix this.
I've followed the Installation Guide on Bookshelf over and over, several times now, and I always end up in the same place. I've tried different port numbers for DiagTool, but that hasn't helped either.
Has anyone successfully installed and configured the Diagnostic Tool on 8.1.1.2 (SIA in my case) and had to tweak anything to get it working, over and above the instructions on Bookself?
Thanking you for any thoughts!

Anyone have any thoughts on this? I'm getting nowhere with Tech Support. :(
I'm convinced the error is somewhere in the Tomcat 'DiagTool' app as the Management Server and Management Agent are running and talking to each other.
I've copied the configuration.agents.xml file into WEB-INF so everything SHOULD be set up correctly - but I'm STILL getting this error immediately after entering login information into the DiagTool login screen.
It's driving me insane - any thoughts at all on this? Please? ;)

Similar Messages

Can't log to Folio Builder in v26 - jumps to AAM

This is just weird!
I've just upgraded tools to V26, and i can't log accounts. When i choose "Log in" in Folio Builder panel, it jumps to Adobe Application Manager, where i see login dialog. Regardles what i type in (any account), it just quits after while without any confirmation or error. When i try to login again in folio builder, this is happening again.
This is very major problem for me at this moment, because we are finishing one mag, and i need to publish modifications - now i can't. What the...?
Martin

Reinstalling tools make no difference.

Diagnostic tool - can't launch it

My diagnostic tool stopped workin. Everything was ok, than the problem began, without any markable reason. First issue was when the ime of tottaly phone usage changed into –27133 hrs value. For now I can't run it at all. " We are very sorry but the diagnostic tool stopped working " is the only reaction when I try to run it. I've tried to download app from Google store but it doesn't help. Any idea what to do? I don't want to "upgrade" from 4.4.4 to Lollipop 5. It's worst case scenario... Thnx!!!

Hi,
Have you tried to just restart the phone to see if this can help? Otherwise, you could try to clear data for Diagnostics via Settings > Apps > The tab "All" > Diagnostics > Clear data.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Can someone help me with the iphone diagnostic tool?

I was trying to use the Iphone diagnostic tool, and i use the ticket number they gave me but it says ticket not found. How can i fix this?

The Magic Wand is subject to the sample size you've set for the color picker.
Yes, I know it seems silly. Personally I think it's a bug that these essentially unrelated things should be connected.
Try this:
1. Open an image.
2. Click the foreground color patch in the tools bar.
3. Right-click on the image somewhere. What's your sample size?
4. Change it to Point Sample.
5. Cancel the Color Picker.
Now your magic wand should work better.
I wouldn't have known this but for having been there myself recently.
-Noel

My 6180 has stopped printing the hp diagnostic tool says connectivity is the problem how can i fix

how can i fix the c6180 that has stopped printing the hp diagnostic tool says connectivity is the problem

Hi thefishermanfl,
How is the printer connected to your computer?
The following documents and utility should help you get the printer up and working again. Let me know if you need additional assistance.
HP Print Diagnostic Utility:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&cc=us&dlc=en&lc=en&...
Installing the Printer Software on a Wireless or Wired (Ethernet) Network:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02283715&tmp_task=useCategory&cc=us&dlc=en&jump...
Installing the Product Software for a USB Cable Connection:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01793627&tmp_task=useCategory&cc=us&dlc=en&jump...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

HP Update unable to install HP Printer Diagnostic Tools

Today the HP Update application prompted me to install three updates related to my Deskjet 3520. Two of them seemingly installed OK, but the third one ("HP Printer Diagnostic Tools") downloads but immediately fails after installation has started.
The manual download of the tool seems to run, but there is no success message, and HP Update still shows this one as missing afterwards. This is on Windows 8 Enterprise x64.
This question was solved.
View Solution.

That update is supposed to install a desktop shortcut to the diagnostics landing page. You can find that here: www.hp.com/go/tools .
I don't know why the update is not working, but I would suggest selecting the "Hide" option so it no longer shows up and adding the above link to your favorites if you wish to save it.
Although I am an HP employee, I am speaking for myself and not for HP

Oracle diagnostic Tools error in 11.5.10.2

Hi,
Can somebody help on this issue, i am getting the error below
ERROR
====
The Oracle Diagnostic Tool showed “No Groups have been registered for the Advance Test”
The patches already applied are 7530017 and 7126196.
I am unable to see IZE directory under /ul02/app/common/lasrt/java/oracle/apps.
Thanks
Dheeru.

As per the note need to apply 6069527 patch, but we have other TEST instance in which Oracle diag tools working good without 6069527 patch.
I think some how we need to install ize top (directory) in $JAVA_TOP/oracle/apps
I see other working Oracle Diag tools instance has this ize directory under $JAVA_TOP/oracle/apps.
So, any suggetion to get ize directory under the path $JAVA_TOP/oracle/apps.It is explained in (E-Business Suite Diagnostics Installation Guide [ID 167000.1]), under "adsplice Patch Installation Notes" section.
Thanks,
Hussein

Virus in diagnostic tools file on desktop

I have recently noticed that my pc guard came up and said I had a virus, I ran a full scan and it said i had a couple of viruses, two were in files and i deleted them, they were linked to my norton files as my norton was out of date, since i have installed norton antivirus and it doesn't pick up my problem.
On my desktop in my toshiba files in my diagnostic tool one of the files has the virus as my pc guard tells me as I open the page, it is in my programe files\toshiba\pc diag cd rom test.exe file not sure whether i can delete that will it do any damage?
If I do can i return the file in some way?
I think i have deleted the file just above it also as it had the same problem, and can't test that now as it has no files, help needed please, what would u do?

Hi Stephen,
Most anti-virus software will let you 'quarantine' infected files so that you can safely remove them and then restore them from the 'quarantine' if the system experiences problems as a result of your actions.
I suggest you either use the 'quarantine' feature or else make a safe copy of the file(s) that you want to delete so that you can restore them if you find that you have problems once they have been deleted.
regards,

Directed here to find a cooling performance diagnostic tool for my X205.

Hi,
I was looking for software to monitor and control the fans in my X205. I have an overheating problem when gaming. The vents are clear, and I have opened the case and cleaned it out. The vents are not blocked. This problem occurred recently. I assumed it was a problem with XP getting corrupted, so I re-installed XP Pro. This did not help. The fan itself works, as I ran it on 5 volts when I opened the case. No problems. It justy won't come on when the GPU gets hot (75 Celcius).
A notebook forum referrred me to this site, and said I should search for a utility called "Cooling Performance Diagnostic Tool", but I can't find anything.
Does anyone know where I can download this utility? I need to monitor and control these fans. I have re-installed the Toshiba system utilities and drivers from the Toshiba site, but the fan does not appear to be controlled.
Anyone got any opinions on this one?
Cheers,
Rob

As far as I know such tool does not exist.
Maybe someone told you to check settings in Toshiba power saver settings for option Cooling method.
Anyway, I presume you have US notebook model so I must redirect you again. ;)
Check Toshiba US support page under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp and pick up info about all available tools and utilities.
You can also visit forum there and discuss with people who have US notebook models.
On this page we discuss in most cases about European models and Europe support.

Solution manager diagnostic tools

I was sure that I read somewhere that there was a diadnostic tool for the web dispatcher and portal,
I am really looking to get diagnostics on load balancing.
Could this be the tool "Solution manager diagnostic tools"
If yes, where can I get it?
Thanks
Jeremy Baker

Please refer note 826671. URL, https://service.sap.com/diagnostics gives you all the information about it.
SMD is used for monitoring the NetWeaver landscape (Java). It is based on WAS 6.40 (think from SP11, 12 it can support). I guess the next version of SM (now 3.2) will be probably housing SMD by default (next version of SM should be based on WAS 6.40).

Diagnostic tool for 11i

Hi Hussein,
Is Diagnostic tool installed by default on 11i too ? Just like in R12?
How do I install it?
Thanks a lot

Hi hussein,
I am stuck with this caution/attention of the patch:
1. Copy the following text files from 3636980 to the admin directory under
   APPL_TOP.
        izuprod.txt
        izuterr.txt
        newprods.txt
   Review newprods.txt and verify that the tablespaces listed exist
   and are the ones planned for use by this product.
   If changes are required, edit the file as appropriate and save it.
   For tablespaces sizing suggestions please see the FAQ "What should be the
   tablespace sizes used for the new IZU product?" in Metalink Note 235307.1
newprods.txt
%%% Splicer control file format 11.5.A
# $Header: newprods.txt 115.2 2005/09/12 06:34:13 mcasalgr noship $
# Section for Oracle Support Diagnostic Tools
product=izu
base_product_top=*APPL_TOP*
oracle_schema=izu
sizing_factor=100
main_tspace=USER_DATA
index_tspace=USER_IDX
temp_tspace=TEMP
default_tspace=USER_DATA
# end of Oracle Support Diagnostic ToolsI dont have the above tablespace , I presume I have to create them right? but i can not see the
tablesapace sizing required in Metalink Note 235307.1
Can you help me the sizing please.
Thanks

HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

After bios update my desktop runs so painfully slow it is unworkable. Disk drive seems to be constantly hammered by processes that don't appear on task manager. Running 64 bit windows 7 (sp1). Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support. Ideally would like to get previous version of bios as machine was running well before update.

I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
the BIODHD-8 error code means your harddrive is failing and must be replaced.
Back up everything that you possibly can before it fails and no longer boots up into Windows .
is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty)
HP notebook warranty status check website
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

PC Diagnostic tool not working

Hi everyone ,
I have a satellite M30 , and the PC Diagnostic tool utility does not work (nothing happens when I click on program ) . I have windows XP service pack 1installed .
I have uninstalled it and downloaded a new one from toshiba's site but it still does not work .
Does anyone know why , and how I can solve this problem .
Thanks in advance for any reply.
And HAPPY NEW YEAR

Hi Sam ,
Thanks for your reply . I had already tried all you
suggested . Even from the explorer at C:\programs , the
program takes me to a blank Index.HTML page .
However , your suggestion made me think about exploring
the other "HTML index."files installed in thefolder ;
and when I clicked on the following file shindan_index.html
, surprise! there is the diagnostic tool and it
seems to be working .
My question now is : is this a bug in the program source,
and also should I change and indicate to the shortcut to
direct to this file to execute the diagnostics ??
Thanks for your help

Lumia 925: Diagnostic tool

Hello guys,
do you know if there is still a diagnostic tool for my Lumia 925?
On my Lumia 800 I can enable this hidden tool with ##634# with a lot of different facts 'bout my handy.
With L925 it shows me the colour, lifetime, modem version.
Can u help me?
"Wenn zwei Knaben jeder einen Apfel haben und sie diese Äpfel tauschen, hat am Ende auch nur jeder einen. Wenn aber zwei Menschen je einen Gedanken haben und diese tauschen, hat am Ende jeder zwei neue Gedanken." - Platon

it still works on my 920, but it is just the life timer that shows.
on my 800 with 7.8....it still works. so I don't think that they eliminated it until the wp8

Building a diagnostic tool to monitor serial port events

Hi,
I'm writing a diagnostic tool. I have two Windows machines communicating via serial ports. I need to treat the software on both machines as "black boxes." I would like to peek at both the sent and received data at one machine and save to a file without emptying the buffers.
Does have LabVIEW have access to these data? Can we look at it without emptying buffers?
Thanks,
FgH...

You can access to the data you like by wiring from the sent or
received data
bufferd line. But, cabablity of this way quite depends on the data
sampling rate
because the monitor is the most time consuming process on LV.
As I've experienced, you can do it in less than 100Hz rate per one data.
And saving to a file may be done after some interval repeatedly. The
files are
better smaller sized ones, so the data is to be storaged in a couple
of data files.
As for more practical method, i have to know your diagnostic tool in
detail
as far as possible. Tom
haibach wrote:
> Hi,
>
> I'm writing a diagnostic tool. I have two Windows machines
> communicating via serial ports. I need to treat the software on both
> machines as "bla
ck boxes." I would like to peek at both the sent and
> received data at one machine and save to a file without emptying the
> buffers.
>
> Does have LabVIEW have access to these data? Can we look at it
> without emptying buffers?
>
> Thanks,
> FgH...

Siebel Diagnostic Tool (8.1.1.2) - can't log in to DiagTool

Similar Messages

Maybe you are looking for