Siebel Marketing Segmentation Not Populated By Organization

Hi,
We are using BIEE 10g marketing segmentation in Siebel CRM system(8.1).
After I load campaign with bi segmentation, I found contacts exist in All Contacts/Prospects Across Organization View with default organization. Not displayed in All Contacts/Prospects view.
I checked organization for all the contacts, they belonged to customized organization but not the default.
So does the campaign and segmentation list.
But if i use Siebel List to load campaign, the organization can be populated correctly. Why????????
Where did this default org come from? ???????
Any ideas?
Thanks in advance!
Vince

Nobody worked on this before???

Similar Messages

Siebel Marketing Segmentation Contacts Not Correctly Populated By organization

Hi
We are using biee marketing segmentation in siebel crm system.
After i load campaign with bi segmentation, i found contacts exist in All Contacts/Prospects Across Organization View with default organization. Not displayed in All Contacts/Prospects view.
I checked organization for all the contacts, they belonged to customized organization but not the default.
So does the campaign and segmentation list.
Where did this default org come from?
Any ideas?
Thanks in advance!
Alvin

Nobody worked on this before???

Siebel Marketing ESD not sending Email

I have installed Siebel Marketing and configured it to send email through launching campaigns. Without intervention of ESD, my emails through F9 (Menu bar->File->Send Email) goes fine but when i send it through a campaign it is not received at the other end, i have not installed BHD so that i can only work on this issue and Send Email first. i have checked my SMTP and its sending mail through telnet just fine. So could anyone tell me what is the problem or what am i missing??
I have configured ESD according to guide and all the verification are in place. There is no error in ESD log or Siebel log related to it. Only thing which i doubt is an error is that "r" 450 4.1.8 <SEMA-CR-1-83O3@CHANGEME>: Sender address rejected: Domain not found" after every contact it processes, be it a valid or invalid email. Kindly any answers would be really appreciated.

Hi,
Will you be able to send it through Task Based UI Email Setup wizard ?
Have you created all the folders required for email marketing in the Siebel marketing FS?
Regards
Muni

Segment not Populated in FB03 in G/L View

Dear Experts,
Document Splitting is activated and all settings for doc splitting have been configured in the system, with Profit Centre and Segment as mandatory fields.
When a document is posted and we are looking at this document in FB03 the segment and profit center are not populated for all accounts (i.e customer and vendor account) when we are in G/L View while everything is populated in Entry View (including customer and vendor reconciliation account).
Thanks for your help

Dear,
GL ledger view fetches data from the header table BKPF and while entry view fetched it from BSIS where these fields are maintained and hence are displayed. In BKPF no such fields are maintained. This is for your information
Regards

Install oracle BI enterprise edition to use it with siebel marketing

Hi guys.
I want to install the Oracle BI Enterprise Edition in order to use it (Segmentation) from Siebel Marketing.
To ensure the correct cooperation, between oracle BI and siebel Marketing, i have to follow some particular procedure?? or i can install Oracle BI normally and after set correctly some parameter in siebel marketing/oracle BI??
If the answer is PARTICULAR...... WHAT??
Thanks in advance.
Best reguards
Antonio

For the OBIEE platform itself it's irrelevant whether you use Siebel Marketing or not. The differences are
a) within Siebel - i.e. the administration screens
b) within the BIEE rpd - i.e. the Marketing metadata objects
ad a) Here's the official documentation: "Siebel Marketing Installation and Administration Guide"
[http://download.oracle.com/docs/cd/B40099_02/books/MKTG_InstallAdmin/booktitle.html|http://download.oracle.com/docs/cd/B40099_02/books/MKTG_InstallAdmin/booktitle.html]
ad b) In the Administration Tool, go to "Manage" -> "Marketing". Here you'll find the four object types:
- Target Levels
- Qualified List Items
- List Catalogs
- Conforming Dimension Links
Cheers,
Christi@n

Ship to party not populating in segment in whsord idoc

HI,
we are creating two delivery with ship to party as 52004 and 56003 (two different sales orders with differnt sold to ). the deliveries are trigerring outbound whsord idoc. The issue is in the segment E1ADRM1 segment for WE qualifier , in the field, " Partner_id", the ship to party 52004 and 56003 is not populated. Rather a constant value 32500000789 is populated in "partner_id " field in both deliveries
Our Abaper is not willing to identiy the same since it is s standard idoc.
Pls can you help as to w hy ship to 52004 and 56003 is missing in partner_id field and some other value 32500000789 is coming ? all other deliveries are created ok.
rgds
Pamela

Hi Pamela,
can you Please share some more information like IDoc details. so that v can analyze more.
Regards,
VSN

Custom idoc segment fields not populated

Way back in 1999 someone create a custom Idoc type with custom Idoc segments in it. Unfortunately, they forgot to release one of the segments.
Recently a change was request to add new fields to this custom segment. In order to get the fields transported the segment had to be released.
All worked fine in Dev and the new Idoc segments were populated as expected. However when the idoc segment was moved to the test system all visually appears to be fine but when the idoc is created (status 50) the new fields are not popultated.
In 40B the start of the inbound process was IDOC_INBOUND_DATA. Does anyone know what the new starting point is in 4.7??
I beleive the error is actually that SData is not reading all the input values and stopping right where the old fields end in teh custom segment.
Thanks,
Anthony

additionally,
SAP will not allow us to release the basic idoc type because it was released in 40B. It also will not allow us to cancel the release since we are now in 620. So, unless anyone has input for this I think the only solution will be to create a successor IDoc type and change our apps to use the new IDoc type with it's enhancements.

OBIEE Marketing Segmentation

Hi..
Anybody is worked or knows about working with segmentation in OBIEE 11g?Could you please share the steps or procedure to understand.Already i am refereing to http://docs.oracle.com/cd/E12852_01/v11113/mktgseg/mktgsegTOC.html
and also need to understand the integration of OBIEE 11G with siebel 8.1 or later.
Question1:Why we will use marketing segmentation? purpose of it?

The below content is lifted from my old notes ;)
Market segmentation is a marketing strategy that involves dividing a broad target market into subsets of consumers who have common needs and applications for the relevant goods and services. Depending on the specific characteristics of the product, these subsets may be divided by criteria such as age and gender, or other distinctions, like location or income. Marketing campaigns can then be designed and implemented to target these specific customer segments.
I would suggest start with Administartor tool->Manage->Marketing->
Marketing Manager->menu Help->Marketing Help
If I'm not wrong, I dont think current 11g version is capable of integrate with Siebel. I heard that its going to be with 11g 1.7 version.
I too looking for same(11g Integration with Siebel) info let me know if you come across any thing.
Thanks in advance,
SVee

Plant not populating in internal order

Hi All,
When we release a serivce order in CRM-Service, system is creating internal order. But it is not populating plant field in internal order. We have done the customizing of linking service organization to plant in CRM. Could you please let me know if there are some other configurations/enhancements to be done to derive plant field for internal order in ECC?
Regards
Suresh

If plant is maintained in Customer-Material Info Master & Customer Master, it will be defaulted in Sales Order.
But incase of Plant being maintained in Material Master, it is a common practice that it requires to be maintained in Sales Otder. If before entering the Material, Plant is maintained at Header level in sales Order, it will default in Line items, else it is required to be maintained for all Line Item.
This is Stansdard SAP.
Regards,
Rajesh Banka
Reward points if helpful.

Message type is not populating in the Inbound idoc control record

Hi,
I have created an Inbound Idoc function module and have done the necessary Idoc settings. But, while testing in WE19, I observed that control record is not getting populated with message type and it is dumping.
The settings which I have done in WEDI as follows:
1. Created Idoc segments with necessary fields and released
2. Created Idoc type for the segment type
3. Created message type
4. Assigned message type to basic type
5. In the inbound processing settings,
filled the ALE attributes with the Idoc function module name and input value '0'
6. Assigned FM to basic type and message type
7. Created process code and assigned the process code to message type
Please let me know, the reason for the message type not populating in the control record. Useful answers will be surely rewarded.
Best Regards,
Mallika

Hi,
Maintain partner profile (Transaction code WE20) for the message type you defined in WE81 and put your process code in partner profile and check your logical system settings also in transaction SALE.
Thanks
Rahul

Extended idoc not populating(urgent)

hi guys
i have extended the basic idoc type delvry03 and created an extension delvrtext for it.however when i trigger the idoc from an output type the extended segments are not populated.is there a way you can put a break point in the code.if that is possible it will help me a lot.i am using the FM idoc_output_delvry to create this.i tried putting break points in rsnasted as well as the above FM but it doesnt stop and the idoc gets created.please tell me how do i make sure my code for populating the extended segments is running properly.
please reply as soon as possible.thanks for your time and help.

hi guys.
thanks for the reply first of all.srinivas what do u mean by assign the extension to application object?i have done the configuration in we82 where i have attached the basic idoc type and extension to message type desadv. the function module is attached to the process code which is used in partner profiles for the idoc processing.can u explain me in detail.the idoc standard idoc is getting created but not the extended segments.also there is this weird message when i run a check on the partner profiles as follows
   Entry XIDCLNT300/LS/LS/DESADV /
   Message Control entry exists for this entry
   Port exists
   Basic type exists
   Extension exists
<b><u>   Combination of basic type and extension is not possible</u></b>
   Link exists between logical message and IDoc type
what does this mean any idea?
once this check is done probably i can go and do the breakpoints.i just have a feeling that i am missing some small thing here.
please let me know
thanks

PAYEXT - Business Partner not Populating

Hi,
We are generating PAYEXT IDoc's from F111.
The Idocs are not populating the Business Partner number in the segment.
Can some one tell me what the issue could be.
Thanks in advance,
Sneha Singh.

1. Goto MDS load cockpit transaction and run the sync for that one customer... Check the log to see why the BP is not created
2. Since you are saying the order was created without any issues, check the credit account on the sales order (header data or table VBAK) check if a BP is created for the credit account (in case credit acct is different to sold to)
3. If sold to = credit account, check if your sd-fscm Badi is implemented correctly. Among other things this Badi copies credit info such as risk class from fscm onto the sales order. Check if this Badi is implemented correctly (I'm assuming u've already activated fscm credit management)
4. Finally you may want to consider adding a line to OVA8 for blank risk category, for all credit control area and block the document for max doc value of -.01. This will prevent any sales orders from getting created when the proper credit info is not copied over from fscm (or if the credit data had not yet been maintained on the BP)
Cheers,
Krishna

Position key flex filed not populating in Position Flexfiled Structure

I have created a Position Key Flex field. While Creating Business Group Organization, Position key Flex Field is not populating in Position Flexfiled Structure Field.
Work Structure > Organization > Description
Org Classification : Business Group

check below -
Unable to Select new Flexfield Structure for the Business Group [ID 390314.1]
Also, did you check if your Position flexfield is compiled saved properly ?

Data not populating in my idoc

Hi guru,
i am writting these below code .
please look my code.here date i am moving from : move W_datum1 to int_edidd-sdata.
so in debugging mode i am getting date value in int_edidd-sdata.
but why the value is not populating in my segment of idoc.can u tell me where is the probleam in my code???
If XVBDKR-VKORG = 'EDM1'
*CONTROL_RECORD_OUT-STDMES = 'INVOIC'
AND DOBJECT-KSCHL = 'ZEDI'.
if INT_EDIDD-SEGNAM = 'E1EDK02'.
LOOP AT INT_EDIDD WHERE SEGNAM = 'E1EDK02'.
            E1EDK02 = INT_EDIDD-SDATA.
            IF E1EDK02-QUALF = '009'.
            W_datum2 = E1EDK02-datum.
            ELSEIF E1EDK02-QUALF = '012'.
              W_datum1 = E1EDK02-datum.
            ENDIF.
          ENDLOOP.
endif.
IF W_datum1 GT W_datum2.
          W_datum1 = W_datum2.
    move W_datum1 to int_edidd-sdata.
MODIFY int_edidd INDEX hilfe_tabix.
          EXIT.
         ENDIF.
       ENDIF.

hi,
my current code is below...
please help
If XVBDKR-VKORG = 'EDM1' and
CONTROL_RECORD_OUT-MESTYP = 'INVOIC'
AND DOBJECT-KSCHL = 'ZEDI'.
if INT_EDIDD-SEGNAM = 'E1EDK02'.
MOVE int_edidd-sdata TO e1edk02.
loop at INT_EDIDD where SEGNAM = 'E1EDK02'.
            E1EDK02 = INT_EDIDD-SDATA.
            IF E1EDK02-QUALF = '009'.
            W_datum2 = E1EDK02-datum.
            ELSEIF E1EDK02-QUALF = '012'.
              W_datum1 = E1EDK02-datum.
            ENDIF.
          ENDLOOP.
endif.
IF W_datum1 GT W_datum2.
          W_datum1 = W_datum2.
W_E1EDK02-DATUM = W_datum1.
int_edidd-segnam = 'E1EDK02'.
move W_E1EDK02-datum to int_edidd-sdata.
APPEND int_edidd.
    MODIFY int_edidd INDEX hilfe_tabix
   lv_flag = 'X'.
          CLEAR: W_datum1,W_datum2.
          EXIT.
         ENDIF.
       ENDIF.

Idoc segment not apperaing for PO creation.

Dear All.
Sceanrio:
Once PO is created , NEU ouptut gets triggered.On release of PO, it generates an outbound idoc.
Issue.
In this outbound idoc the segment E1EDKA1 WE is missing.This segment gives the Ship to address in the PO, ie normally the plant address to which the material is shipped.
Analysis:
This PO has 3 line items and these are created by reffering 3 different PR s.So my question here is , whether is this standarad SAP behaviour where Ship to address segment wont get populated into idocs for multiple line item POs.Why i am asking this is that, if suppose the PO has 10 different line items , with 10 different plants.Each plant has different address.Then how system will decide which ship to address will populate in E1EDKA1 WE segment.
Or is there any other behaviours, when the PO has multiple line items.
Please let me know your thoughts on this.
Regards
Shyam

Hello Shyam ,
The reason for this behavior could be that tthe items in the IDOC have a different delivery address maintained in the Ourchase Order. If the delivery address for all items is the same , the segment E1EDPA1 with qualifier WE will be not populated. Instead of generating E1EDPA1 , the system will create one E1EDKA1 segment with qualifier WE. This will prevent on receiving side the creation of the same delivery address for all items.
I hope this information has been helpful.
Best Regards,
Frank Farinella

Siebel Marketing Segmentation Not Populated By Organization

Similar Messages

Maybe you are looking for