Siebel screens pointing to analytics dashboards

Siebel has screens like Service Analyitcs, Marketing Analytics that will navigate the user directly from Siebel to the corresponding dashboard in Analytics or OBI Applications like is called today.
These screens are configured in a very specific way in order to integrate and be transparent to the user that you are jumping from one application (Siebel) to another (OBI Applications).
Pls. does anybody knows any document that can give a step by step or at least the concepts behind this integration ? The idea is to build other landing pages (OBI dashboards) for Siebel users.
Txs. for any help.
Antonio
BExpert, Brazil

Hi Antonio,
You could see this site : http://obieelive.blogspot.ch/2012/06/obiee-integration-with-siebel.html
or you could access to the Oracle tech note on the Oracle support site : Master Note for OBIEE 10g Integration with EBS, Siebel, SSO, Portal Server, Peoplesoft [ID 1248939.1]
Hope it helps,
Benoit

Similar Messages

  • HOW TO VIEW DATA IN PRE-BUILT ANALYTICS DASHBOARDS AND REPORTS

    HI FOLKS,
    I WANT TO SEE DATA IN THE REPORTS OF PRE-BUILT ANALYTICS DASHBOARDS? EG: AUTOMOTIVE, SALES, SERVICE DASHBOARDS. SO WHAT IS THE COMPLETE PROCESS TO SET UP THIS ENVIRONMENT. I'M USING SIEBEL ANALYTICS VERSION 7.8.5.
    THANKS IN ADVANCE
    VJ

    Hi,
    I am new to Business Intelligence Applications and keen on learning it.
    I know Informatica and OBIEE(Not a very experienced person).
    I have installed BIA on my local windows machine.
    I am using Oracle Apps as the source.
    In the execute tab I selected the HR-Oracle 11510 execution plan and ran it but it failed.
    The workflow error log says the following:
    "ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6193 [Error occured during expansion of DB connection parameters [Database connection name DataWarehouse for database connection variable $DBConnection_OLAP is not well defined.
    ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6270 [Error: Variable parameter expansion error.].
    ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: CMN_1761 [Timestamp Event: [Tue Feb 26 15:59:35 2008]].
    ERROR : TM_6292 : (2928|2336) Session task instance [SIL_InsertRowInRunTable]: TM_6226 [ERROR:  Failed to initialize session [SIL_InsertRowInRunTable]].
    ERROR : LM_36320 [Tue Feb 26 15:59:37 2008] : (1276|3864) Session task instance [SIL_InsertRowInRunTable]: Execution failed.
    WARNING : LM_36331 : (1276|3864) Session task instance [SIL_InsertRowInRunTable] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SIL_InsertRowInRunTable] will be failed.
    ERROR : LM_36320 : (1276|3864) Workflow [SIL_InsertRowInRunTable]: Execution failed."..
    I think I have missed few steps here and there.. I am struck up here.. I don't know what to do... I think its the problem connecting to the source and target schema.. can you please help me out?

  • Intermittent Blank Screen - Multi-Tab Corporate Dashboard

    Hi All,
    We are a facing an intermittent blank screen issue with our corporate dashboard. Details are as follows: -
    Environment:
    BO XI 3.1 SP2 FP2 (Two servers on production)
    Xcelsius 2008
    Live Office
    QaaWS
    Issue:
    Sometimes we only see a blank screen (Not even the initializing screen) when a corporate dashboard is opened from Infoview.
    This is a multitab dashboard and is built using Live Office and QaaWS connections.
    Initially the issue was occuring only on one server and sometime later it started occuring with the second server as well.
    We restrated the services on both the servers and the issue disappeared. (Maybe it was due to cache getting cleared up, though not sure on this)
    What we need:
    1. Are there any known issues for this kind of issue?
    2. What are the possible reasons for intermittent blank screen?
    I have searched through the forums and BOB forums and have found about the visibility issue. In our case we do not face any issues with that.
    Regards,
    Abhishekh

    Hi Amit!
    Running the trace is fine, but the issue occured only once and that to when we restarted the corresponding servers the issue vanished.
    Why I feel that this is not something related to flash is because, first the issue appeared on the first prod box (merantime the second prod box was showing the output correctly). Later on (maybe in 5-10 mins) even the second server started having issues.
    So far the issue has appeared only once. However the business would like to understand the possible reasons and would like to avoid similar situations in the future.
    We do not have access to either the Firefox or Chrome. Though we have tried with multiple versions of IE. The IE version on which the issue appeared was IE 6/7.
    I think, I will close this thread for now. If the issue resurfaces again, we can look into it further.
    Hope to hear back from you soon!
    Regards,
    Abhishekh Jain
    Edited by: Abhishekh Jain on Oct 18, 2011 9:17 AM

  • Analytics dashboard question

    I'm a Captivate user and I wanted to get a better understanding of the Analytics Dashboard so I've downloaded the Presenter 9 trial. I've enabled analytics as well as reporting for a SCORM 2004 environment, published a file with multiple questions, and uploaded the zip SCO into my LMS as well as into SCORM cloud.
    When I launch the module I'm presented with the user login prompt, but when I enter my information and click Sign In I get an error message "Error connecting to server, try again." If I continually try to login it will eventually move into the content.
    I've also tried launching the content without the SCORM reporting turned on and running the module from a web server, but I still get at least one error message about being unable to connect to the server.
    In all three cases, the data from the attempts isn't updated in the learning dashboard. Since I haven't found any information about how this functions I'm guessing that either the data doesn't get updated dynamically or that the error messages are causing the problem.
    Can anyone enlighten me to these issues?

    Hello,
    Sorry to know that you are facing problems with Analytics dashboard in Presenter.
    Can you tell us if you could connect to als.adobe.com when you were getting this message?
    Our server was down for few hours yesterday for maintanence and this was informed to all existing customers.
    Can you please retry your workflow as all services are up now. Let us know if its works for you.
    If it does not, you can email us at mvlele(@)adobe(dot)com and we will do our best to resolve your issue at the earliest.
    Regards,
    Mukul

  • HR Analytics Dashboard Description documents

    Hi All,
    How can I get HR Analytics Dashboard Description documents or any presentation about it?
    Thanks

    Are you looking for something similar to the following?
    http://www.oracle.com/us/products/057353.pdf
    http://docs.oracle.com/cd/E14224_01/doc/bia.795/e13669/odi_anyimp_configworkforce.htm
    You may Google "Oracle Human Resources Analytics" and go through the links.
    Thanks,
    Hussein

  • Disable Actuate reports from Siebel screen.

    Hi Gurus,
    I have never worked on Actuate before. We have recently converted all our Actuate reports into BI Publisher reports on Siebel 8.1.1. Since the conversion went on smoothly, I would like to know how to disable the Actuate reports from showing up on the Siebel Screen as we would like to use BI Publisher reports going forward.
    Thanks,
    Swarna

    Hi,
    I guess u r mentioning the old actuate reports displayed on the view. If u want to remove that, you should take the view name and in tools under view - check for the View Report - Make them inactive. Compile. The report wont appear in the view/screen..
    Regards,
    Joseph

  • Siebel screen refreshing automatically

    Hello experts,
    I need some guidelines to resolve an issue. Customer has done fresh installation on Solaris for Siebel 77212 version. Same configuration like SRF/database/templates etc have been used for new environment, even the same obj mgr cfg files with identical parameters. Now, in new environment siebel screen refreshes irrespective whether session is idle or active, and takes screen back to Site Map. Refresh rate is not consistent ranges from 5 minutes to an hour at times. Customer confirmed issue is not reproducible with following parameters on old environment:
    Application Message Bar Flag = User Enabled
    Application Message Bar Update Interval = 120 seconds
    ConnectIdle = -1
    eapps.cfg SessionTimeOut = 10800
    Can you please help me to give some directions to troubleshoot the issue ? ISP search did not produce helpful KM/documentation.
    Many Thanks,
    Chaitanya

    What is the SessionTimeOut value in the current environment?
    With the Message Update Interval set lower than the SesionTimeOut you keep the session alive.
    Without the Message Bar and a low value of SessionTimeOut you can encounter the described behaviour.

  • TS1369 my ipod has a charger on its screen pointing to a itunes symbol I have tried to connecting it to itunes but nothing happens

    My ipod has a charger on its screen pointing to a itunes symbol I have tried connecting it to itunes but nothing seems to happen.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • A black box which follows my screen pointer has appeared. Must be a background item?  Any suggestions?

    A black box which follows my screen pointer has appeared. Must be a background item?  Any suggestions?pointer

    Hit Cmd-F5 (not F-5)
    Or in System Prefs>Universal Access, uncheck Enable access for assistive devices.
    or, if that doesn't do it, reverse the steps in this article
    http://www.ehow.com/how_12135607_make-box-around-cursor-mac.html

  • HT2477 when i move the cursor across the screen it launches the dashboard - how do i stop it

    when i move the cursor across the screen to the left it launches the dashboard - how do i stop it doing that ?

    Hi Jimb9,
    Thanks for visiting Apple Support Communities.
    If Dashboard seems to be launching automatically when you move your mouse to the left, first check to see if a "Hot Corner" has been set.
    Hot Corners
    To specify an action to perform when you move the pointer to a screen corner, choose the action from one of the Active Screen Corners pop-up menus.
    After you set an active corner, move your mouse to that corner of your screen to see the result.
    You can find the Active Screen Corners menu by going to System Preferences, then choosing Mission Control and clicking the Hot Corners button in the bottom left.
    These articles have more information about Mission Control:
    Mac Basics: Mission Control
    http://support.apple.com/kb/ht4689
    OS X Mavericks: Mission Control preferences
    http://support.apple.com/kb/PH13925
    All the best,
    Jeremy

  • OS X Won't completely boot - blue screen, pointer then nothing

    (MBP with problem is 2.0GHz Core Duo 15" MBP. 1.5GB RAM)
    As topic says, g/f woke her MBP pro up from sleeping to type an email. Shortly after opening the mac everything stopped responding. She held down the power button to turn off the mac and then turned it back on. MBP loads past grey Apple screen and shows the progress bar for loading OS X. Once progress bar dissapears then nothing, just a blue screen with the mouse pointer.
    I have already done the following:
    - Booted from Install DVD and ran disk utility. Verified Drive but no isssues. Verified and Repaired Permissions. Still didn't boot
    - Booted in 'Safe' boot. Exact same problem
    - Booted into Single User Mode and ran fsck -fy, no problems reported. I can browse the drive and see files etc.
    - When I attempted to finish loading OS X from the command line I do remember seeing the following error: coreservicesd crashed. Googled but couldn't really find out anything I understood to help.
    What are my options here. The MBP in question is unfortunately about 2 weeks past the Warranty date w/ no applecare but she may take in tomorrow regardless.
    Can I use a firewire cable to connect the two macs and at least get the most important data off if we have to reinstall?
    Thanks in advance for the help!

    That sounds like wake from Hibernation/Deep Sleep - there's no "progress bar" with a normal Boot, only a spinning grey wheel then the Desktop appears .
    I believe this is the screen he is referring to.
    -Bmer
    Mac Owners Support Group
    Join Us @ MacOSG.com
    YouTube.MacOSG.com
    iTunes: MacOSG Podcast
     An Apple User Group 

  • Very Important: Employee photo on module pool screen: Points assured

    hi all
    I have uploaded the employee photos using tcode OOAD.
    Now in a module pool program, i need to show the emloyee's photo on the screen alongside the employee's other details..
    Please let me know how to get the employee photo on screen.
    thanks in advance
    <b>Points assured </b>

    You can use the PICTURE CONTROL for this. Check the Link for further details
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIIMAGE/BCCIIMAGE.pdf
    http://help.sap.com/saphelp_erp2004/helpdata/en/9b/d080c09fc111d2bd68080009b4534c/frameset.htm
    Also check the program RSDEMO_PICTURE_CONTROL
    Message was edited by:
            Abhishek Jolly

  • Marketing Analytics dashboard reports showing page not found

    Hi All,
    We are using Apps 7.9.6.3,when I click Glossary dashboard navigation reports links showing page can't found.
    Error Page 404 page not found.
    This is the navigation path
    http://HOSTNAME:7001/analytics/Res/l_en/marketing/MarketingGlossary.html#Sent
    Please let me know where is the path, how to configure html files.
    Thx,

    That might be BI 10g related
    check here for the same OracleBI\web\app\olh\l_en\marketing\MarketingGlossary.html

  • Black screen, pointer visible, no windows

    Turned on my laptop. Error screen. Selected safe mode. Now I have a black screen but can see my pointer moving just Windows won't load. How do I load Windows?

    What laptop do you have? Check the label on the bottom for the model and part numbers.

  • Finding screen points

    So this is probably a dumb question, but is there a way to translate points to a more 'global' coordinate system for the screen? Here's what I'm trying to do:
    Add subview(a)
    Add subview(b)
    Add subview(c)
    -Drag some subview(d) of c over a or b
    -Upon release, determine which subview d was 'dropped' on - here is where I run into problems
    -Add the subview(d) to a or b depending on which one it was dropped on
    My problem comes when I try to figure out where the d subview is in relation to the other subviews. I thought I could use
    CGRectContainsPoint(someViewToAddObjectsTo.frame, newPoint))
    but the problem is that my newPoint is in relation to subview(c). For example, I drag d up and to the left of its container view(c). Its origin is something like -30, -130 in relation to its superview(c), so I can't check that point against subview a or b.
    So what I'm really getting at, is there a way that I can ask a view what its origin is based on the current window and not just in relation to a superview?

    See convertPoint:toView: etal in UIView. - Ray

Maybe you are looking for