Siebel version 8.0.0.5 concerns

Siebel version 8.0.0.5 was made available as a GA (General Audience) around the middle of October. Since then we have seen 12 QF been made
available. From the naming of the QFs, the last one being QF0521, it looks like there are more on the way. It looks like there could be as much
as 21 QFs on the way, less then one month after the patch set was made available.
Anyone else being sceptical/having doubts about putting this version into production?
Anyone having Siebel 8.0.0.5 in production already or planning a rollout of that version in the near future?
Axel

Hi Axel,
We have two customers on 8.0.0.5. Both are very happy with it now. Both were disappointed when the installed it and found issues with the “with” block that were later fixed with a QF.
Take care,
R
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.com

Similar Messages

  • UPK OnDemand Log Viewer - unsupported Siebel version

    As we record using UPK the OnDemand Log Viewer is being populated with the following message:
    SIEBEL.WAP Version check - Trying to record unsupported SIEBEL version [21215]
    Should we be concerned? Can we ignore the message?
    Thanks in advance,
    Jon

    Hello,
    If you're not on the latest release, you may want to consider upgrading as it will provide you with support for the latest application versions. If you are already on the latest version, or if you have specific questions, I suggest you open a ticket with support: http://support.oracle.com/
    Best regards,
    Marc

  • Siebel version for OBIEE11g?

    Hi all,
    Can someone let me know what version of Siebel is compatible with OBIEE 11g?
    Thanks in advance.

    Hi User,
    Only Siebel 8.x is supported with OBIEE 11G. Siebel 7.8 is not certified with OBIEE 11g.
    See the support ID 1201933.1 for certification matrix.
    Regards,
    Kalyan Chukkapalli
    http://123obi.com

  • About siebel version

    Hi,
    I need to download Siebel 7.8 for my Oracle AS adapter 10.1.0.2.0...
    I looked in the edelivery.oracle.com website... i found Siebel Business Applications, Version 7.8.2, Base Applications for Windows
    Is that the one? or 7.8 is different from 7.8.2

    Hi,
    I need to download Siebel 7.8 for my Oracle AS adapter 10.1.0.2.0...
    I looked in the edelivery.oracle.com website... i found Siebel Business Applications, Version 7.8.2, Base Applications for Windows
    Is that the one? or 7.8 is different from 7.8.2

  • Siebel version

    Hi,
    I need to download Siebel 7.8 for my Oracle AS adapter 10.1.2.0.2...
    I looked in the edelivery.oracle.com website... i found Siebel Business Applications, Version 7.8.2, Base Applications for Windows
    Is that the one? or 7.8 is different from 7.8.2

    Hi
    Could you be a bit more precise on what you are looking for?
    Your question as stated is to imprecise, its like asking:
    What can I buy for $100?
    What are you looking for? Technology in use, base concept,
    supported environments, …..?
    Axel

  • Can we Install siebel crm latest version on Windows  7 (64 bit )

    Hai to all
    May i know the Latest Version of Siebel CRM ?
    Can we install Siebel Crm on windows 7 (64) bit operating system. And i downloaded some of the files from
    oracle e-delivery cloud. its and all jar files
    how can i convert into .Exe Files ?
    Can any one suggest me and share me your valuable ideas !
    thanks
    kumar

    Kumar,
    The latest Siebel versions are 8.1.1.10 and 8.2.2.3. The release (8.1.1.x or 8.2.2.x) will depend on your requirements, you can discuss this with your Oracle contact.
    You can install client/tools in windows 7 64 bit. The server environment is not supported in windows 7. Here is a link to the SRSP guides:
    http://docs.oracle.com/cd/E11886_01/srsphomepage.html
    For 8.1.1.10 and 8.2.2.3 , please check Doc ID 1492194.1 on support.oracle.com
    To convert the jar files into exe files follow instructions below:
    http://docs.oracle.com/cd/E14004_01/books/SiebInstWIN/SiebInstCOM_Image6.html
    Hope it helps,
    Wilson

  • Source version control integration with siebel

    Hi All,
    I am trying to integrate siebel tools with third party version control i.e svn
    I have passed the required paramters in srcctrl bat & set the option in tools accordingly.
    Checout/checkin happening fine.But files not getting created in SVN repository
    Does any one has working srcctl bat file for the same
    Appreciate all your help

    Nothing much yet, but I found a website that has the batch file for integration with SVN.
    Guess I have to contact the author to get more details:
    http://arwaheem.wordpress.com/2008/04/30/siebel-version-control-source-code-integration-using-sub-version/

  • Siebel Chat on Siebel 8.1.1.4 Version

    Is it possible to enable & expose service of Siebel Chat on Siebel version 8.1.1.4 SIA?

    Hi
    Please review the following documents for more information on your query:
    Integrating Third Party Chat Solutions with Siebel Chat (Doc ID 556298.1)
    Running Siebel Chat in Industry Applications (Doc ID 1905830.1)
    Is Siebel Chat supported for eService Customer face application? (Doc ID 1078058.1)
    Let us know if you need any further information.
    Regards
    Sudeshna

  • Attempted repair of 3.5.1 database yields message that it may "...remove data supported only in newer versions..."

    After starting Aperture with Command+Option keys, and being presented Photo Library First Aid, then choosing Repair Database radio button, then clicking on Repair --- I am presented with a dailogue: 
    "This library has been opened with a newer version of Aperture.
    Repairing the library using this version of Aperture may remove data supported only in newer versions of Aperture."
    This does not add up, as I am running 3.5.1, which is the newest version.
    So, I am concerned about running the repair.
    Thoughts?
    Richard

    Richard, I am seeing the same. For some libraries Aperture seems to be confused about the version:
    My Aperture version is 3.5.1, the library is version 3.5.1, but still I am getting this message when trying to repair, even after repeated repairs.
    The repair does not seem to cause any harm, however, but I cannot recommend it as safe, as long as we do not know, what is causing this.
    I am seeing this only for libraries, that have been opened by the latest iPhoto 9.5.1. Is that the same for your Aperture libraries?
    -- Léonie
    Added: Repeated "Repair" does not help, but after one "rebuild", the version number will revert to normal and stick, and the warning is gone. But don't try to "rebuild" without first updating your backup of the Aperture library.

  • Siebel exception - SSCASVBC.dll could not be loaded

    We have many CORBA servers written in C++ running on SOlaris box. They connect to Siebel Corba Object Manager running on windows server and fetch the business components.
    I am getting error Siebel exception 4096 "SSCASVBC.dll could not be loaded sometimes when trying to get a business component or sometimes when invoking a business method. If I bounce all the servers the error disappears for 3-4 days and after that again the problem starts. What can be wrong. I do not know much of Siebel. I do not even know where to look for logs and how to enable Siebel logs or CORBA logs. I guess currently no logs are getting generated. Can someone help me please?
    siebel version is 6.3 and we are using visibroker orb for CORBA

    q1: is there a way to tell visual studio 2005 not to produce a .net dll?That's not a Java question. It is a Visual Studio 2005 question. Ask the vendor.
    q2: i tried compiling the code in vc++ 6.0 but got a bunch of "files not found" errors.Then you need to fix them. Again this is not a Java question.
    i don't think the sdk is even compatible with vc++ 6.0. is there an alternative?Once again that question should be directed to the vendor.
    MSDN is probably your friend here.
    has anyone successfully compiled c++ code with gdiplus stuff (graphics, etc...) in vc++ 6.0?Many times.

  • Upgrade path to Siebel 8.1.1.5

    Hi,
    Does any one know the exact upgrade path to Siebel 8.1.1.5 from 8.0.0.6 SIA.
    This is for SIA Applications.
    Thank you

    Wilson,
    The same document has this note, which is causing the confusion.
    For Siebel Enterprise Applications customers who are upgrading to the Siebel 8.1.1.3 Fix Pack, the upgrade path is as follows: Upgrade to Siebel version 8.1.1, Siebel 8.1.1.1, or Siebel 8.1.1.2, and then upgrade to Siebel 8.1.1.3. This applies to a Siebel database upgrade only.
    8.x to 8.1.1 is fine but the going to 8.1.1.3 FP is not clear.
    8.1.1.3 FP maintenance doc doesn't talk about any upgrade.

  • Creating siebel image file for Siebel Patch 7.8.2.16 to upgrade from Siebel 7.8.2.14

    I new to installing Siebel Patch 7.8.2.16 for Microsoft Windows 2003 Servers, Mobile Web Client. We are currently running Siebel version : 7.8.2.14 on 7.8.2.14 SIA [19251] ENU patch applied. We need to install upgrade to Siebel 7.8.2.16 to install QF0E26 for an issue with MVG popup. What is the best practice to create Siebel image file from Siebel CD which has multiple JAR files on CD media for Siebel CD Media pack sent to me. Let me know if you need additional details.  Thanks JollyRoger

    Hello Jolly,
    Thanks for using Oracle communities.
    You need to download installables for 7.8.2.16 SIA. Follow below instructions to download:
    1) Login to My oracle support through your credentials
    2) Go to tab 'Patches & Updates'
    3) Enter patch number as '11687049' in 'Patch Name or Number' field and click on search.
    4) Download patch for Windows.
    Once you download, you need to use Image Creator Utility to generate an Installation image.
    Please follow below online bookshelf link on how to create Image.
    http://docs.oracle.com/cd/B31104_02/books/SiebInstWIN/SiebInstCOM_Image5.html#wp1594731
    I hope it helps.
    Best Regards,
    Chetan

  • Upgrade Siebel 7.5.3 - 8.1.1

    Hi, we have a client that want to upgrade current Siebel version (7.5.3) to Siebel 8.1.1.
    Does anyone have experience on that? Basically we want to confirm the path for migration (is it required to pass through an intermidiate bersion such as 7.7, 7.8 or 8.0?) and confirm what is the best way to estimate the effort for the upgrade without having access to client repository?
    Thanks in advance.

    Yes 7.5.3 to 8.1.1.1 is a direct path upgrade.
    Regarding your customer, there no short answer regarding the effort level of upgrade, as it will highly depend on the current Siebel application.
    There are several factors to take into account:
    Iso or not iso upgrade, SIA migration or SEA (Remember that 8.1.1 is the last SEA version) ,unicode migration, change of OS/SGBD, new modules or existing modules enhancements,number of languages deployed, interfaces technology, usere location (multi countries or local users), CTI to name few.
    It is highly recommended that you perform a pre-migration study to assess risk and benefits and level of efforts.
    Migration can be anywhere from 3 month to 1 year project so it is always wise to do at least a prestudy with customer configuration.
    Best Regards

  • Adapters to Integrate SAP XI and Siebel system

    Hi,
      Can anyone guide as to which Adapters would be useful to integrate SAP XI and Siebel system.Can we use SAP standard adpaters if so which one ..please let me know ?
    Thanks.

    Hi ,
    The new Siebel versions includes CORBA and MQ APIs .you could use the JMS Adapter from XI ( which is for free ) and connect to MQ to that.
    and as such there are no Siebel adapters for Xi apart from using them from iWay which i agree with Frank.
    Have a great day!
    Venkat

  • Siebel Error while configuring in IDM ?

    Hi,
    I am trying to connect to Siebel system via IDM resource configuration wizard. I have put following 2 jars in WEB-INF/lib folder -
    Siebel.jar
    SiebelJI_enu.jar
    The Siebel version is 7.8.2.3.
    Please assist. According to Siebel team, all the parameters are correct.
    I am entering the proper values in the resource parameters page. I am getting this error -
    Test connection failed for resource(s):
    SiebelCRM: com.waveset.util.WavesetException: Unable to create connection : Invalid connect string "siebel://3.209.232.103:2320/CFS_DEV/SSEObjMgr_enu/cfsdsbgw". (SBL-JCA-206)
    When i check the logs i found the below messages
    20081015 17:41:20.620 http-0.0.0.0-8080-2(0x00ad3fd4) SiebelCRMResourceAdapter#getSiebelDataBean() Info Unable to create connection : <Exception>
    <Major No.>4096</Major No.><Minor No.>4098</Minor No.><Message>Invalid connect string "siebel://3.209.232.103:2320/CFS_DEV/SSEObjMgr_enu/cfsdsbgw". (SBL-JCA-206) </Message><DetailedMessage>Unknown<DetailedMessage>
    </Exception>
    Not able to point the root issue.
    Edited by: salimadugur on Oct 15, 2008 5:52 AM

    we got the success in the test connection after changing the Siebel URL Template
    siebel.tcpip.none.none://%h:%p/%e/%o
    Thanks

Maybe you are looking for

  • When I try to open Iphoto by clicking on the icon, it doesn't open but instead the App Store opens... what to do ?

    I am working on a mini: when I try to open Iphoto it deviates me directly to the App Store... can't open Iphoto...  any suggestions ?

  • Can't get Justify text to work in Illustrator CS4

    Hi When I open the Paragraph panel, I can make text left align, right, center, but no matter what Justify setting I click, my text just jumps to right aligninment. How do I make it work? Cheers Shaun

  • Ojc will compile the following class. A bug?

    I thought that in Java classes cannot be declared protected. ojc will however compile the following class: protected class aclass The Sun java compiler prints the following error: aclass.java:1: modifier protected not allowed here protected class acl

  • Export Import Help Needed

    Hi, I have a situation where i have to export data/tables from Oracle 7.3.4.4.0 and import into Oracle 8.1.7.4.0. Is it possible to export data from a lower version and import into higher version? I have never worked on Oracle 7 and Oracle 8. Any kin

  • COMMIT Point Setting

    Hi Im loading my data from CSV files into Tables of my Database. But i observed that the database is getting commited after each record is loaded. This is very slow. I hav seen the seting for commit point in the configure properties as 200 but i do n