Siemens - Simantic IT Unilab / SAP Integration / xMII

Hi all,
Any experience in conducting integration between Simantic IT Unilab (LIMS) and SAP R/3 using xMII?
Simantict IT offers connectors to achieve such integration with SAP R/3 by XI pathway. But we found this as an opportunity to explore xMII. I would appreciate any comments or suggestion in this particular.
Thanks
Tony
Message was edited by:
Tony Carrillo
Message was edited by:
Tony Carrillo

Tony,
I haven't personally seen or done interfaces to Unilab, but that doesn't mean it hasn't been done, and according to: http://www.cubetechnologies.com.au/Contents/sb_unilab_e.pdf
"Standardized and scalable: Simatic IT Unilab has become the industry standard in hardware and software. The system is based on industry standards such as Oracle, Microsoft, NT, and Unix. You can choose an architecture with two or three tiers. Simatic IT Unilab is standardized and was designed to interface with other enterprise systems (ERP, MES, etc.) through conventional and emerging technologies (such as XML)."
LIMS systems in most cases just have an industry standard relational database underneath the vendor specific client application, which is no problem for xMII standard connectivity for running queries or calling procedures to access the desired information.
Regards,
Jeremy

Similar Messages

Problem in integrating xMII with VC

hi Experts,
My xMII server Version is 11.5
I followed this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40b92770-db81-2a10-8e91-f747188d8033 for integrating xMII with VC.
Connection URL: http://<myXMIIServerName>/Lighthammer/ALL_TEMPLATES?version=11.5&trace=true
Driver Class Name: com.sap.xmii.custom.integration.jdbc.SAPxMIIJDBCDriver
System Alias: XMII_JDBC
Connection test is successful, after configured System.
I am getting error while FindData Seach in VC,
Inputs given are,
System: XMII_JDBC (this is my system)
Look for: Look for a table
the error is, Error-2305 Cannot retrive catalogs and schemas; check the connection to the selected systems Cannot access JDBC metadata 
I think i made mistake in connectionURL, but connection test is successful.
Please guide me, where i made mistake.
Points will be Awarded.
Thanks & Regards,
Chinnadurai R

Hi Sam,
Thanks for your reply... I am also think that i made mistake in comnnection URL ,
I have created some querys under Samples/Reports,
I gave like this::
http://<myXMIIServerName>/Lighthammer/Templates/Samples/Reports?version=11.5&trace=true and http://<myXMIIServerName>/Lighthammer/Templates/Samples/Reports?
and then like this
http://<myXMIIServerName>/Lighthammer/Illuminator/Templates/Samples/Reports?version=11.5&trace=true
I tried using all the URL shown above, but it is not listing the Querys in VC .
Can u guide me how can i form that Connection URL ..
Thanks & Regards,
Chinnadurai R

Error after uninstalling the SAP Integration Kit XI 3.0 on Unix

Hi all,
I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
Now when I try to go to the login page of CMC or InfoView I get an error:
type Status report
message /PartnerPlatformService/service/app/logon.do
description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
Is the login page trying to look for the SAP authentication page that was removed ?
Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
Thanks for ideas, Timo

Thanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
 <context-param>
 <param-name>config.logon.service.context</param-name>
 <param-value>/PlatformServices</param-value>
 </context-param>

SAP Integration kit for BO XIR2 with Crystal XI for BI 7.0 Front end

Hello Team,
We are in a little fix.
We have BOE XIR2, Crystal XI and working with old version of BI front-end 3.5.
We are upgrading to BI 7.0 frontend, but I am not able to trace out the SAP Integration kit for combination of BOE XIR2, Crystal XI and BI7.0.
Is such a thing available, If yes can someone send a link to that.
Regards
Lalan Kanade

Hi,
Thanks for the quick reply
I could trace this document. "BusinessObjects Enterprise XI Release 2 SP3 for Windows"
I checked in "Supported Data Sources for Crystal Rep" section, extract below
SAP BW Server 3.0b SAP GUI 620 or 640
SAP BW Server 3.1c SAP GUI 620 or 640
SAP BW Server 3.5 SAP GUI 640.
But we are using BW Server 7.0 with GUI 7.1 and that working fine even with BOXIR2 and Crystal XI with Old Front End for BI 3.X.
But when we are testing with BOXIR2 and Crystal XI with BI New Front End 7.0 its missing components from the query output.
So the SAP Integration kIt seems old & we need a new Kit which would work with BI New Front End 7.0.
Any suggestions on that
Regards
Lalan

BOE XI 3.1 + SAP Integration Kit on AIX 5.3 with WebSphere 6.1 (SOLVED)

Hi everybody!
On a recent installation I encountered a problem with SAP Integration Kit using BW Query with prompts; I want to share with you what I did to solve this problem:
First of all, the environment:
IBM Server with AIX 5.3
BO Repository on DB2 9.5
Application Server IBM WebSphere 6.1
BOE XI R3.1
Crystal Reports 2008 SP1
After installing and configuring everything on the system, I encountered some problem launching in InfoView reports created with Crystal Reports 2008 based on BW query with SAP Prompts.
The error that I recieved everytime was:
com.sap.mw.JCO.$Function
What I did to solve this was:
1) Configure the absolute complete classpath inside the Application Server (path/sapjco.jar)
2) Put the sapjco.jar version 2.18 at 32bit (unix version) that you can download at https://websmp108.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000463654&
Hope this helping you
Bye
Andrea

Dear Gurus,
The issue I am facing is described exactly in the document "Upgrading to CR 2008 V1 / SP1" by Blair Wheadon.
The problem occurs when installing CR2008v1 and BOE 3.1 on the same machine.
The solution is to download and install SP1.
Unfortunately for me, I have downloaded SP1 but the installation is not going well.
Message prompts that installation files are corrupt and that I should download again.
I have downloaded twice. And tried several times.
So I guess it might be due to the platform.
But why wasn;'t the message displayed after BOE3.1 installation was completed?
Do you guys have an idea?
Alice

Business Object and SAP Integration

All,
We've BOJ Data Services XI installed.
Would like to integrate with SAP, does anyone know how or have good information about Business Object and SAP Integration?
Please adivce.

Hi Lynn,
If you need to have Business Objects and SAP work together in conjunction you need to have the Business Objects Integration Kit for SAP. Integration Kit provides the database drivers and other features for reporting off SAP.
Link to download the useru2019s Guide:
- Please go to Http://help.sap.com
- Click on Business Objects tab
- Select the product as Integration Kit for SAP
User guide: Business Objects Integration Kit for SAP Useru2019s Guide.
I hope that helps you.
Regards,
Prashant

Error while installing SAP integration kit 3.1

Hi,
I installed SAP integration kit 3.1 on one server and it is working fine but when i am installing same installable on another server it is giving error as "Installation ended prematuarly because of an error". I dont know how to debug the error. Please help me.
Thamnks in advance

Hi Sonali,
had a similar problem on a Windows/Tomcat system. The installation was crashing before trying to deploy the .jar files. If you are facing the problem in a similar environment please make sure that you have copied the librfc32.dll and the sapjco.jar files in the correct directories. Especially for sapjco.jar doublecheck the path you have copied the file into.
Regards,
Stratos

Crystal Developer XI without Sap integration kits cant see released Queries

Hi All!
When I'm used MS Excel, I can see released SAP BW Queries via SAP OLE DB access. But when I'm used Crystal Developer XI (without Sap integration kits), I cant see released SAP BW Queries via SAP OLE DB access.
What's a problem here?
WBR Artem

Hi,
you missing the SAP integration Kit. To conenct to SAP BW you need the SAP Integration Kit installed.
ingo

Default language settings in SAP Integration Kit?

Hi everybody,
I've the following problem:
If I create a report with the SAP Integration Kit (create new report from a query) I get a prompt where I can type in (System Number, User, Password and LANGUAGE). If I now choose as language u201CEnglishu201D and create a report, save it and open it in crystal again, everything is still fine. But if I go to refresh the report, I get a prompt where I can choose the SAP BW and type in the System Number, User and Password but not the LANGUAGE. After the refresh the names of the fields are still in English but the data is now in German (or just the technical names, depends on the language settings in the query).
For me it looks like that the language settings of the refresh are by default in crystal is set to German, but the software is English. I didnu2019t find any way to change the default language to English or save it in the report.
I already tried to change the language/regional/keyboard settings of my machine and also tried to change the language in the crystal formula field u201Clanguagecode%u201D.
But even if I could have a unique change in some system settings, it really will not help me, because I have some queries in German and some in English, depending on the actual BW system.
If the SAP Integration Kit gives me the possibility to choose the language during the creation of the report it should then remember the choice!?
Thank you for your help

Post your question to the Business Object Integration Kits forum

How to import the transports from the SAP Integration Kit into SAP system

Hi expert,
I read the forum "Re: Integration with SAP R/3 to realise i have not done the import of transport but i don't quite understand the statement give by "Sebastian Li".
"Unpack the SAP Integration Kit zip-file. It contains a transport-folder. Here you'll find a short manual which files you should import.
Copy the needed files on your sap-system in the correct folders:
- usr\sap\trans\cofiles
- usr\sap\trans\data
Use the transaction STMS.
Also take care of the sequence of importing. See the manual for details."
Can some one explain it in more details to me. I have unzip the SAP Integration Kit n in the transport folder got 2 more folder "ansi" and "unicode_compatible". How do i know which 1 to use? Where i should copy this files to?
Please advice.
thank you

Hi Rajesh,
check this : logon failed. you do not have the necessary rights to design reports
@Sri

Charts are not showing up in WEBI after the SAP Integration

folks,
              I have successfully iinstalled the following
              BOBJ XI R3.1 Java version
              Crystal Reports 2008 with SP1
              Xcelsius 2008 enterprise
              SAP GUI
              Java Connector
              SAP Integration tool kit.
Now in WEBI when I want to draw some charts which are not showing up. Please give me some suggestions.
Regards,
preddy

HI,
I would suggest you open this in the WEb Intelligence forum unless this only happens with SAP based reports.
Ingo

Crystal Report XI R2 compatablity with SAP Integration kit

Hi All,
we have suggested to one of our customer the Customized pack of BO XI Edge series which include the licensing of Xcelsius , WEBI , Universe designer, SAP Integration kit and Live office...
He dont want to pay extra for taking the license for cryatal report 2008 as they already using the Crystal Report XI R2 version which they use to do reporting on non SAP data.
My question is :
1 - Now they want to do reporting ove SAP data using the existing CR solution they have is it possible ??
2- Will the integration kit support the CR XI R2 version ??
3- Can he publish the Crystal Report created by CR XI R2 to the Business Object Edge Series plateform ??
They just want to use CR to do reporting on data from R/3 side .
Kindly suggest.
Regards,
Mishra,Vibhav.

Dear Ingo,
Thanks for the reply.
Actally we have suggested to our client the latest Edge Series Standard pack solution , excluding the crystal report licensing.
My question is will the integration kit which comes along with the Edge series will support the existing Crystal Report XI R2 and can the it be integrated with BOE(can he publish the reports created with the earlier version to the Business Object plateform).
If the above sceanario is not possibe then we have to purchse the older version of integartion and i doubt if we can purchse it stand alone in that case we would be having two integration kits running to solve the purpose.
Kindly suggest.
Warm regards,
Mishra Vibhav

Issue with SAP Integration Kit 3.0 to access Query BW on Crystal Reports

Hi All,
I've got an problem with my setup of Crystal Reports Server 2008.
I've install Crystal Reports Server 2008 and Crystal Reports 2008 on my Windows 2003 server.
My SAP Client is 7.1.
When i trie to connect my Reports on CR 2008, the connection doesn't work.
I have install SAP Integration Kit but it doesn't work because an error message says me that i've already install a Webserver for Crystal Reports Server 2008.
My Webserver is on IIS 6
My Database for CRS 2008 is SQL Server 2000.
Do you have any idea why it doesn't work ?
I have to install first my SAP Integration Kit 3.0 before install Crystal Reports Server 2008 ?
Thanks a lot for your help.
Regards.

Hi All,
I've got an problem with my setup of Crystal Reports Server 2008.
I've install Crystal Reports Server 2008 and Crystal Reports 2008 on my Windows 2003 server.
My SAP Client is 7.1.
When i trie to connect my Reports on CR 2008, the connection doesn't work.
I have install SAP Integration Kit but it doesn't work because an error message says me that i've already install a Webserver for Crystal Reports Server 2008.
My Webserver is on IIS 6
My Database for CRS 2008 is SQL Server 2000.
Do you have any idea why it doesn't work ?
I have to install first my SAP Integration Kit 3.0 before install Crystal Reports Server 2008 ?
Thanks a lot for your help.
Regards.

BO XI 3.1 SP3 - SAP Integration Kit: Transports

Hi All,
My question is regarding the transports that need to be imported into SAP system so that it can connect with BOE. We are connecting our BW system with BOE, please let me know whether we need to move all transports in BW system only or we have to move transports in R3 system as well.
Thanks in advance.

Hello Ingo,
Please help us in solving the below issue:
We have installed BO XI 3.1 version with the following configurations.
Windows 2003 Server, SP2 64bit Version
Java: JDK 1.7 and JRE 1.7
BW: BW 3.5 version
BOE in Tomcat 5.5 App server
SAP integration kit 3.1 32 bit (51040568.zip)
The issue is that while integrating BOBJ with BW to import all the roles for SSO, we are unable to find the exact JCO files for doing the same. We tried with JCO 2.1.8, JCO 2.1.10 and JCO 3.0, but all the versions turned futile. After the initial installation with JCO 2.1.8 version (as per to Installation guide) we found neither CMC nor Java Infoview are working.
Please help us in identifying the right JCO for the proper installations and do we need to install SAP integration kit 3.1 SP3 ? This is pretty urgent
Regards,
Rajib

Finding Download for SAP Integration Kit Fix Pack 3.1 / ADAPT01412706

Hi all,
by using Crystal Reports 2008 V1 SP3 in combination with SAP Integration Kit 3.1 (SBOP INTEGRATION FOR SAP SOLUTIONS XI 3.1 SP3 WINDOWS (32B)) i get an error during the inportstep of the transports in our BW System.
This error is descriped and solved in Note 1484086
(https://websmp130.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3134383430383626)
Following the Notesteps there is one conclusion using the transport files from the "SAP Integration Kit to FixPack 3.1" . My problem is to find these named Fix Pack in the download area of the Marketplace.
An Fix Pack for the SAP Integration Kit itself seems to be not aviable,
therefore I tried several downloads beginning with:
Crystal Reports 2008 Fix Pack 3.1 - Click Once
Crystal Reports 2008 Fix Pack 3.1 - Redist Install
Crystal Reports 2008 SP3 Fix Pack 3.1
there are no transportfiles in any of these packages.
If any from you have some idea where to find the right transport files, please let me know.
Regards
Marco

Hi Marco,
you can go in Sap Support Portal -> Software Downloads-> BusinessObjects Downloads
in the left select "Search for Software Downloads" then in "Search Term" input:
BOBJINTGRSAP03P
You'll retrieve all available versions of IK SP3 with related fixpacks.
Regards.
Roberto.

Siemens - Simantic IT Unilab / SAP Integration / xMII

Similar Messages

Maybe you are looking for