Sig update notification and frequency

Hi Experts,
What's the process by which IDS customers find out when new signatures (and service packs) are available? Is it the responsibility of the customer to check periodically or does Cisco automatically notify IDS customers?
Also, approx how often do new signatures become available and what's the trend been like? More often? Less often?
Thanks for any feedback.

You can sign up for IDS Active Update Notification from here:
http://www.cisco.com/kobayashi/sw-center/ciscosecure/ids/crypto/
...just follow the "IPS Active Update Bulletin" link near the top.
The updates come out once a week or more.

Similar Messages

  • HT4623 i received update notification and started to download update, but it says that it takes 3 hours, which is strange

    I received update notification and started to download it on my iphone 5 but it says it takes 3 hours

    Well, right now, Apple is getting loads of people who are trying to download the new update. My iPod is doing the same thing, so, just wait an hour or two and then try again. It may take a while to veryify the update, and even longer to actually download it. Some people at my school updated their OS in study hall, while others were having the same problem you were. It should be fixed soon, just relax...

  • Updates, Resets, and Replacements

    I wish I could create a sticky thread on these topics as so many of the same questions get re-asked over again.  It also seems that I'm offering the same answer to a lot of people.  I'll try to be as thorough as possible here so that I can reference this post in the future for people and save time.
    Update and Resets
    A lot of problems come with the solutions it seems whether its a small update or a large OS version change.  Usually the first thing I do is to Factory Reset the phone first as soon as I get the OTA Over The Air update notification and before downloading.  I then reboot and let the phone begin setup, but go to settings quickly to turn off mobile data and allow WiFi only for the time being.  I then accept the update and may even FDR again after that to make sure it was clean.  But, sometimes I get too excited or just accidentally accept the update before resetting the phone.  I also seem to remember a time it just auto-updated and installed without me giving permission.  Point is, you can't disable the system updater and you'll have to take it eventually.
    Also regarding updates:  When updates are installed they essentially re-write the recovery partition of the phone.  Think of it like when you flash the BIOS of a PC.  It's hard-written and is forever changed.  So, if you had a bad install then there is really no use in an FDR multiple times to attempt to fix it.  It won't revert or re-install.  All I know is to have a full charge, good WiFi strength (Mobile data uses data from plan) and to just accept the update and leave it alone until it completes.  All the resetting before or after is recommended by most folks, but VZW says it's not a must do type of thing.
    Replacement Phones
    I know we all bought new phones and hate having to be given a replacement phone often or always being a refurbished phone thinking we are getting someone else's headache.  I have yet to run into, but have heard of stories, where the phone you receive is a previously trashed unit physically speaking.  It is doubtful LG and VZW would spend much money on replacing much more than a part, maybe two on a refurb unit.  Most ALL units were units with software issues and were easily re-flashed at the factory or repair center.  the point is, even if you return your unit to LG and wait the 1-2-3 week(s) turnaround for a repair and pay the shipping costs to and or from, if any, then when you receive your repaired phone you now have a refurbished phone as well.
    Contacting Verizon
    If and when you decide to contact Verizon, I suggest you do so in this order:  Chat online from the Contact Us link at the top of the right side of screen on the VZW homepage, log into your account and choose the Live Chat option.  Secondly, try the phone, and lastly take it to a store.  Problem with going to a store is there will be a wait time usually, there aren't many "techs" in the store, there isn't much they will do other than try to reset your phone while you wait and they move on to another customer until your phone is back up and running, then check it for the usual app conflicts and whathaveyou.  At that point you'll be frustrated (unless you got an attentive rep) and they will end up sending you home with a signed sheet of paper saying your replacement will be sent to you and you send back the defective unit in their box pre-paid.  Also, when using the phone option to call VZW, you'll need a different phone to call them on because they will want to troubleshoot your issue and cannot with the phone being used.
    Conclusion
    I hope some folks get to read this.  I admit I may have missed something, but it seems that almost all smartphone issues are software related usually.  In most cases a reset works fine, but if you just got an update on your system, then usually resets don't work and you need to contact VZW due to the one year warranty with them.  If it is after that period they may still assist, IDK because I have always bought Asurion insurance and have never had to worry about the 2nd+ year as the warranty is extended as long as I pay the monthly fee.

    Snn5 wrote:
    I wish I could create a sticky thread on these topics as so many of the same questions get re-asked over again.  It also seems that I'm offering the same answer to a lot of people.
    Welcome to the club, Snn5!  I've been around here for awhile - sticky posts, FAQ's, How to posts.... all well and good if folks would actually search and READ them.  But they don't.  They just ask their question... so those of us who are here to help out and answer questions end up, like you, posting the same replies, endlessly.  A sticky or FAQ isn't going to change that.  So, bookmark your favorite replies and useful info, learn the shortcuts to adding it to a reply, and accept that nothing will change.
    Thanks for being willing to help out!

  • App Store Update Notifications Help

    Hello all.
    First time poster and first time apple product owner. I just bought an iPad (3rd Gen) last week. I'm hooked and absolutely love it. I am having an issue with two apps in regards to their update notifications in the app store. The twitter app and hbogo app currently show that an update is available. When I click update or update all, I am prompted to enter my password and after doing so i receive the Could Not Connect to iTunes Store message. This is only happening for these two apps. Moments ago I had 6 update notifications and when hitting update all the four other apps updated and two notifications remain for twitter and hbogo. I checked these forums already and was unable to find anything on the issue. Any insight into this problem would be appreciated. My thanks in advance.
    Sincerely,
    Satisfied Apple User

    Rebooting one's iPad can often cure odd issues.  To reboot, press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider to shut down) until the Apple Logo appears, then let go of both buttons and your iPad will restart.  You will not lose any data or settings.  See if you can update both apps after your iPad comes back up.
    If that does not help, the next suggestion would be to delete the two apps, then redownload them.  Once you've purchased or downloaded an app, it stays in your Apps Library and can be redownloaded at anytime in the future.  To delete an App, hold your finger on any app until all apps start to jiggle.  You'll see an X on the upper right hand side of the apps you can delete (native apps can never be deleted) and all you do is touch the X and you'll be asked if you are sure, say yes, and the app will be deleted.  Then go to your purchased tab in iTunes and redownload the apps.

  • AppStore Update notification hernia.

    My App Store shows an update from Angry Birds. The App was purchased with a different ID and has been deleted from my iTunes and purchases. I still get the update notifications and I can't seem to get rid of them using either of the two IDs
    It is extremely irritating as the only place the app exists is in my update notifications. If I click on it, I am redirected to the Angry Birds page and prompted to purchase the app. How do I remove this notification?

    You may have installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store alert. For example, the App Store could prompt you to update "Angry Birds" or "Twitter," but the hacked app could be "Final Cut Pro." Don't make any assumptions about which app you're looking for. To find it, you must carry out a systematic search with Spotlight.
    1. Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    2. In the Finder, press command-F to open a search window, or select
              File ▹ Find
    from the menu bar. In the search window, select
              Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu of search criteria, initially showing Kind. From that menu, select
              Other...
    A sheet will drop down. In that sheet, select
              Raw Query
    as the criterion, then click OK or press return.
    Now there will be a text box to the right of the menu of search criteria. That's where you enter the raw search query. Click in that box and paste the text you copied earlier by pressing command-V.
    3. The search window will now show all the App Store products that are installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    4. At least one of the apps in the Spotlight search results is not among your purchases in the App Store. Move each such item to the Trash, after quitting it if it's running. You may be prompted for your administrator password. Empty the Trash.
    5. Quit and relaunch the App Store. Test.
    If you find these instructions confusing, ask for an alternative method.

  • I updated my iphone 5 to ios 6.something to get rid of a notification and it went into recovery mode!!! My photos are not backed up or on icloud. i havent restored yet bc i cannot lose my photos but tinyumbrella wont work. HELP! please:(

    I updated my iphone 5 to ios 6.something (something about the speakers) to get rid of a notification and it went into recovery mode!!! My photos are not backed up or on icloud. i havent restored yet because i cannot lose my photos/videos, etc. but tinyumbrella wont work to exit recovery mode. HELP! please:(
    i tried tinyumbrella (and another similar software) to exit recovery but it only remains on the apple logo stuck there. please is there anything else i can do? i've contacted apple and they have told me the only choice i have is to restore and lose all my data.
    my iphone isn't jailbroken and i've updated before without this problem so i'm not sure what has happened. is there anyyy hope please ???

    First I would try to hold down the power and the home button for about 15sec, but at least as long as the iPhone restarts, if it is still stuck or still in recovery mode then I can suggest you the tool "Wondershare Dr. Fone for iOS", it is both a Windows and Mac tool and I just used it today to get my iPad out of the Recovery mode.
    Tell me if any of these options worked for you.

  • How do i remove an Update notification? I do not want to update to the latest iOS (Asian languages) which is useless to me and I don't want to waste space on my iPad. I want to be able to "Select All" instead of doing each update individually.

    That's quite a title I created!  Sorry, I've never submitted a question before! ☺ I do not want to update to the latest iOS (Asian language stuff) which is useless to me and I don't want to waste space on my iPhone 4S and iPad 5. I want to be able to "Select All" updates instead of doing each update individually. It's a real pain in the you-know-what. Does anyone know how to I remove this notification (and any other updates I'm not interested in) from the Updates page? Thanks so much everyone!

    Thanks so much for your time!  I wish you had a more positive answer, but c'est la vie!  I hate the fact that I cannot control my apps and feel like a hostage of the developer(s). I've read other forums and some responses were "then delete the app!"  Lame answer!  So thank you so much for your respectful and insightful reply!  Cheers.

  • HT201270 I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down.

    I have an iPad 3rd gen. A carrier settings update notification has appeared on my screen, and it doesn't do anything when I press either 'update' or 'not now' . Because the notification is still there, I am unable to use any apps or shut it down. What should I do?

    Have you tried a reset by pressing and holding the sleep/wake button and the home button for 20 seconds (maybe longer) until the Apple logo appears, ignore the red slider.  Then turn back on. You won't lose any data doing the reset.

  • After updating to iOS 8 notification and control center won't open when unlocked

    Ever since I updated my iPhone 5s to iOS 8, the notification and control center will not open while my phone is unlocked. I checked to see if I had it disabled in settings and it turns out I did not. I switched the Access Within Apps as well as the Access While Locked on and off anyway but still nothing. I can only pull the notification and control center open while my phone is locked... it is extremely annoying. I know I'm not the only one though because my friend who updated to iOS 8 on his 5c was having the exact same problems. Some help would be much appreciated. Thank you!

    So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

  • My ipod wont tell me when i get new notifications and it started happening right after i updated it

    after i updated my ipod it wont tell me when i get new notifications and it says i shuld sync it to itunes i did that and im still not getting new notifications also my imessage and facetime aren't working
    Message was edited by: max83636893

    Go into your settings, are the push notifications turned on? Same with messages.

  • Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.

    Tried updating my itunes about a month ago, it would not update properly and left me with a notification saying "i tunes was not installed properly, please reinstall itunes" i've uninstalled and reinstalled a few times and still nothing.
    i might need walked through on a few things if they are too complicated.

    Have you:
    - Restore from backup. See:                                                
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.            
    If a PC
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Disable update notification for Flash Player 15.x and newer

    Dear all
    We run a Citrix Environment (on Windows 2008 R2) and we have our monthly update window. Users complain that they get update notifications for Flash Player when a new version is available but they cannot install the update since they have no permissions to install or update any software on our locked down Citrix environment.We tried already all availabe guides regarding "disable update notification for Flash Player" but no guide seems to work with the latest Version 15.x.  
    Which registry key's oder files do we have to modify with what values to finally disable update notifications for Flash Player.
    Thanks a lot for your help!

    Please check out the System Administrator's Guide for a list of possible approaches:
    Adobe Flash Player Administration Guide for Flash Player | Adobe Developer Connection

  • Some computers download and install the two approved updates, others only download Windows Update Agent and not the approved updates.

    Some computers download and install the two approved updates, others only download Windows Update Agent and not the approved updates.

    UN-successful Windows Update Log:
    2014-05-07 09:33:56:180
    1036 e70
    Misc ===========  Logging initialized (build: 7.6.7600.256, tz: -0400)  ===========
    2014-05-07 09:33:56:220
    1036 e70
    Misc  = Process: C:\Windows\system32\svchost.exe
    2014-05-07 09:33:56:221
    1036 e70
    Misc  = Module: c:\windows\system32\wuaueng.dll
    2014-05-07 09:33:56:180
    1036 e70
    Service *************
    2014-05-07 09:33:56:221
    1036 e70
    Service ** START **  Service: Service startup
    2014-05-07 09:33:56:222
    1036 e70
    Service *********
    2014-05-07 09:33:56:544
    1036 e70
    Agent  * WU client version 7.6.7600.256
    2014-05-07 09:33:56:545
    1036 e70
    Agent  * Base directory: C:\Windows\SoftwareDistribution
    2014-05-07 09:33:56:546
    1036 e70
    Agent  * Access type: No proxy
    2014-05-07 09:33:56:547
    1036 e70
    Agent  * Network state: Connected
    2014-05-07 09:33:57:315
    1036 e70
    Setup Service restarting after SelfUpdate
    2014-05-07 09:33:57:545
    1036 e70
    Setup Client version: Core: 7.6.7600.256  Aux: 7.6.7600.256
    2014-05-07 09:33:57:592
    1036 e70
    Report CWERReporter::Init succeeded
    2014-05-07 09:33:58:326
    1036 e70
    Report ***********  Report: Initializing static reporting data  ***********
    2014-05-07 09:33:58:376
    1036 e70
    Report  * OS Version = 6.1.7601.1.0.65792
    2014-05-07 09:33:58:376
    1036 e70
    Report  * OS Product Type = 0x00000030
    2014-05-07 09:33:58:394
    1036 e70
    Report  * Computer Brand = Hewlett-Packard
    2014-05-07 09:33:58:444
    1036 e70
    Report  * Computer Model = HP Compaq 4000 Pro SFF PC
    2014-05-07 09:33:58:455
    1036 e70
    Report  * Bios Revision = 786H7 v02.00
    2014-05-07 09:33:58:504
    1036 e70
    Report  * Bios Name = Default System BIOS
    2014-05-07 09:33:58:554
    1036 e70
    Report  * Bios Release Date = 2011-01-31T00:00:00
    2014-05-07 09:33:58:554
    1036 e70
    Report  * Locale ID = 1033
    2014-05-07 09:34:03:562
    1036 f08
    Report REPORT EVENT: {082D455B-6E51-4238-A997-1D27D9214A72}
    2014-05-07 09:33:58:565-0400 1
    199 101
    {0011B9ED-9189-4D58-BE25-FA2F13FC3D6C}
    1 240005
    SelfUpdate Success
    Content Install Installation successful and restart required for the following update: Windows Update Aux
    2014-05-07 09:34:03:614
    1036 f08
    Report CWERReporter finishing event handling. (00000000)
    2014-05-07 09:34:42:049
    1036 e70
    Agent ***********  Agent: Initializing Windows Update Agent  ***********
    2014-05-07 09:34:42:049
    1036 e70
    Agent ***********  Agent: Initializing global settings cache  ***********
    2014-05-07 09:34:42:049
    1036 e70
    Agent  * WSUS server: http://csd26.csd.local:80
    2014-05-07 09:34:42:049
    1036 e70
    Agent  * WSUS status server: http://csd26.csd.local:80
    2014-05-07 09:34:42:049
    1036 e70
    Agent  * Target group: CO
    2014-05-07 09:34:42:049
    1036 e70
    Agent  * Windows Update access disabled: No
    2014-05-07 09:34:42:063
    1036 e70
    DnldMgr Download manager restoring 0 downloads
    2014-05-07 09:34:42:089
    1036 e70
    AU ###########  AU: Initializing Automatic Updates  ###########
    2014-05-07 09:34:42:089
    1036 e70
    AU AU setting next detection timeout to 2014-05-07 13:34:42
    2014-05-07 09:34:42:090
    1036 e70
    AU AU setting next sqm report timeout to 2014-05-07 13:34:42
    2014-05-07 09:34:42:090
    1036 e70
    AU  # WSUS server: http://csd26.csd.local:80
    2014-05-07 09:34:42:090
    1036 e70
    AU  # Detection frequency: 22
    2014-05-07 09:34:42:090
    1036 e70
    AU  # Target group: CO
    2014-05-07 09:34:42:090
    1036 e70
    AU  # Approval type: Scheduled (Policy)
    2014-05-07 09:34:42:090
    1036 e70
    AU  # Scheduled install day/time: Every day at 3:00
    2014-05-07 09:34:42:090
    1036 e70
    AU  # Auto-install minor updates: Yes (User preference)
    2014-05-07 09:34:42:105
    1036 e70
    AU Initializing featured updates
    2014-05-07 09:34:42:116
    1036 e70
    AU Found 0 cached featured updates
    2014-05-07 09:34:42:116
    1036 e70
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:34:42:117
    1036 e70
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:34:42:117
    1036 e70
    AU AU finished delayed initialization
    2014-05-07 09:34:42:117
    1036 e70
    AU AU setting next sqm report timeout to 2014-05-08 13:34:42
    2014-05-07 09:34:42:117
    1036 e70
    AU #############
    2014-05-07 09:34:42:117
    1036 e70
    AU ## START ##  AU: Search for updates
    2014-05-07 09:34:42:117
    1036 e70
    AU #########
    2014-05-07 09:34:42:291
    1036 e70
    AU <<## SUBMITTED ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
    2014-05-07 09:34:42:341
    1036 f08
    Agent *************
    2014-05-07 09:34:42:341
    1036 f08
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-05-07 09:34:42:341
    1036 f08
    Agent *********
    2014-05-07 09:34:42:341
    1036 f08
    Agent  * Online = Yes; Ignore download priority = No
    2014-05-07 09:34:42:341
    1036 f08
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
    and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-05-07 09:34:42:341
    1036 f08
    Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-05-07 09:34:42:341
    1036 f08
    Agent  * Search Scope = {Machine}
    2014-05-07 09:34:42:341
    1036 f08
    Setup Checking for agent SelfUpdate
    2014-05-07 09:34:42:342
    1036 f08
    Setup Client version: Core: 7.6.7600.256  Aux: 7.6.7600.256
    2014-05-07 09:34:42:349
    1036 f08
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2014-05-07 09:34:42:392
    1036 f08
    Misc Microsoft signed: Yes
    2014-05-07 09:34:44:669
    1036 f08
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2014-05-07 09:34:44:676
    1036 f08
    Misc Microsoft signed: Yes
    2014-05-07 09:34:44:754
    1036 f08
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2014-05-07 09:34:44:777
    1036 f08
    Misc Microsoft signed: Yes
    2014-05-07 09:34:44:781
    1036 f08
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2014-05-07 09:34:44:788
    1036 f08
    Misc Microsoft signed: Yes
    2014-05-07 09:34:44:837
    1036 f08
    Setup Determining whether a new setup handler needs to be downloaded
    2014-05-07 09:34:44:855
    1036 f08
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe:
    2014-05-07 09:34:44:862
    1036 f08
    Misc Microsoft signed: Yes
    2014-05-07 09:34:44:862
    1036 f08
    Misc WARNING: Digital Signatures on file C:\Windows\SoftwareDistribution\SelfUpdate\Handler\WuSetupV.exe are not trusted: Error 0x800b0001
    2014-05-07 09:34:44:862
    1036 f08
    Setup WARNING: Trust verification failed for WuSetupV.exe. It will be deleted and downloaded, error = 0x800B0001
    2014-05-07 09:34:44:863
    1036 f08
    Setup SelfUpdate handler update required: Current version: 7.6.7600.256, required version: 7.6.7600.256
    2014-05-07 09:34:44:873
    1036 f08
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256"
    2014-05-07 09:34:44:932
    1036 f08
    Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
    2014-05-07 09:34:44:933
    1036 f08
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
    2014-05-07 09:34:45:048
    1036 f08
    Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
    2014-05-07 09:34:45:048
    1036 f08
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256"
    2014-05-07 09:34:45:234
    1036 f08
    Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.256" is already installed.
    2014-05-07 09:34:45:235
    1036 f08
    Setup SelfUpdate check completed.  SelfUpdate is NOT required.
    2014-05-07 09:34:48:415
    1036 f08
    PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2014-05-07 09:34:48:415
    1036 f08
    PT  + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
    2014-05-07 09:34:48:424
    1036 f08
    PT WARNING: Cached cookie has expired or new PID is available
    2014-05-07 09:34:48:424
    1036 f08
    PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
    2014-05-07 09:34:48:424
    1036 f08
    PT  Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING: SOAP Fault: 0x00012c
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING:     faultstring:Fault occurred
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING:     ErrorCode:ConfigChanged(2)
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING:     Message:(null)
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING:     Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
    2014-05-07 09:34:48:454
    1036 f08
    PT WARNING:     ID:cb5babad-3a1d-4e6b-946e-736ed4746e3f
    2014-05-07 09:34:48:464
    1036 f08
    PT WARNING: Cached cookie has expired or new PID is available
    2014-05-07 09:34:48:464
    1036 f08
    PT Initializing simple targeting cookie, clientId = 97287ab2-5824-44d2-bf93-8a98da659f77, target group = CO, DNS name = c18714.csd.local
    2014-05-07 09:34:48:464
    1036 f08
    PT  Server URL = http://csd26.csd.local:80/SimpleAuthWebService/SimpleAuth.asmx
    2014-05-07 09:35:06:497
    1036 e70
    AU Forced install timer expired for scheduled install
    2014-05-07 09:35:06:497
    1036 e70
    AU UpdateDownloadProperties: 0 download(s) are still in progress.
    2014-05-07 09:35:06:497
    1036 e70
    AU Setting AU scheduled install time to 2014-05-08 07:00:00
    2014-05-07 09:35:06:498
    1036 e70
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:35:14:236
    1036 f08
    PT +++++++++++  PT: Synchronizing extended update info  +++++++++++
    2014-05-07 09:35:14:236
    1036 f08
    PT  + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://csd26.csd.local:80/ClientWebService/client.asmx
    2014-05-07 09:35:20:118
    1036 f08
    Agent  * Found 0 updates and 79 categories in search; evaluated appl. rules of 859 out of 1494 deployed entities
    2014-05-07 09:35:20:194
    1036 f08
    Agent *********
    2014-05-07 09:35:20:194
    1036 f08
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-05-07 09:35:20:194
    1036 f08
    Agent *************
    2014-05-07 09:35:20:209
    1036 f08
    Report CWERReporter finishing event handling. (00000000)
    2014-05-07 09:35:20:209
    1036 f08
    Report CWERReporter finishing event handling. (00000000)
    2014-05-07 09:35:20:209
    1036 bb8
    AU >>##  RESUMED  ## AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
    2014-05-07 09:35:20:209
    1036 bb8
    AU  # 0 updates detected
    2014-05-07 09:35:20:209
    1036 bb8
    AU #########
    2014-05-07 09:35:20:209
    1036 bb8
    AU ##  END  ##  AU: Search for updates [CallId = {5AA2F00A-8964-4543-A740-EC45C5FD5752}]
    2014-05-07 09:35:20:209
    1036 bb8
    AU #############
    2014-05-07 09:35:20:210
    1036 bb8
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:35:20:210
    1036 bb8
    AU Featured notifications is disabled.
    2014-05-07 09:35:20:211
    1036 bb8
    AU AU setting next detection timeout to 2014-05-08 11:19:46
    2014-05-07 09:35:20:211
    1036 bb8
    AU Setting AU scheduled install time to 2014-05-08 07:00:00
    2014-05-07 09:35:20:212
    1036 bb8
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:35:20:212
    1036 bb8
    AU Successfully wrote event for AU health state:0
    2014-05-07 09:35:25:183
    1036 f08
    Report REPORT EVENT: {C1B39107-F517-4477-AAE3-9B1F1D6002BF}
    2014-05-07 09:35:20:193-0400 1
    147 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Software Synchronization
    Windows Update Client successfully detected 0 updates.
    2014-05-07 09:35:25:183
    1036 f08
    Report REPORT EVENT: {669B9537-BB71-4190-BA58-A97F725AE4D8}
    2014-05-07 09:35:20:194-0400 1
    156 101
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Pre-Deployment Check
    Reporting client status.
    2014-05-07 09:35:25:184
    1036 f08
    Report CWERReporter finishing event handling. (00000000)
    2014-05-07 09:37:32:440
    1036 f08
    Report Uploading 3 events using cached cookie, reporting URL = http://csd26.csd.local:80/ReportingWebService/ReportingWebService.asmx
    2014-05-07 09:37:32:454
    1036 f08
    Report Reporter successfully uploaded 3 events.

  • Flash Player installation and update questions and answers

    How do I verify that I have the latest version of Flash Player?
    If you receive a message that tells you that Flash Player is out of date or a new version of Flash Player is available, you can verify this by visiting the Flash Player Help page with your browser.
    Simply click the "Check Now" button and you'll be presented with a short message and detailed information regarding your Flash Player installation.
    Where should I download the latest version of Flash Player?
    Because malware authors will often employ misleading tactics to make malware look like something you should trust, it's important to get your Flash Player updates directly from Adobe.
    Please verify that your Flash Player downloads and updates come from only the adobe.com or macromedia.com domains.  You can always download the latest version of Flash Player directly from https://get.adobe.com/flashplayer
    I've selected the automatic update option in Flash Player, why do I continue to get update notifications?
    Periodically, users are presented with the Flash Player update dialog notifying them that a new version of Flash Player is available for download from adobe.com.
    The automatic update mechanism is used for some updates, security patches that address zero-day vulnerabilities and when users, who have selected to be updated automatically, have not updated within 45 days after a regularly scheduled update release of Flash Player.
    What should I expect when I receive notification that Flash Player has an update available?
    When a major update to Flash Player becomes available you will be presented with a Flash Player update dialog
    After reviewing new features, pressing the Download button will open your default browser and load the Install Adobe Flash Player page.
    Clicking the "Update now" or "Install Now" button will then take you to the next page which will start the download process and give instructions for completing the Flash Player install.
    Finally, once the installation is complete your browser will display a page confirming a successful installation.
    If you encounter installation problems, we recommend you review our Windows and Mac OS installation help documents. Further questions and information can be found on the Flash Player installation forums.
    Why does Adobe Flash Player installer include the option to download additional software?
    Adobe offsets the ongoing development costs of Flash Player, which is made available for free, by offering users the option to download select software from Adobe partners.
    What options do I have when installing or updating Flash Player?
    You have a few different options available when updating Flash Player. We recommend that you choose "Allow Adobe to install updates (recommended)" when initially setting up Flash Player
    or by going into the Flash Player control panel and choosing this option in the Advanced tab.
    Once selected, most updates will occur in the background without requiring any interaction. For those regularly scheduled major update releases, you will be presented with an update notification dialog
    If you decide not to update, you will receive an automatic update within 45 days if you have the "Allow Adobe to install updates" option selected. Please note that when this update occurs, only Flash Player will be installed.
    If you want to be notified about every Flash Player update, select "Notify me to install updates" when initially installing Flash Player or from the Advanced tab in the Flash Player control panel.
    Finally, if you'd prefer not to receive any updates, select "Never check for updates (not recommended)". We do not recommend this option as we believe keeping your system up to date improves both security and stability when using Flash Player.
    For network Administrators we offer additional update options, including the ability to host your own internal Flash Player update server. Please see our Flash Player distribution page and Flash Player Administrator guide for details.

    Sunil, I just want to verify you are pointing me to the link under "Progress bar hangs during download / Unable to connect to server / Unable to download metafile."
    If yes, then that is the file I originally downloaded based on a March post I saw here.
    I just tried it again, and it (by "it" I mean the Flash Player Plug-in (All other browsers from download.macromedia.com) installed 11.6.
    After the installation process completed, the dialog box notified me it was version 11.6, and when I went back to, the "find version" page, 11.6 was confirmed.
    I did not download the exe for Internet Explorer, as I almost never use that browser.

  • Link Between Service Notification and Sales Order

    Hi All,
    In our business process, we will create sales order from Service Notification and we can see the same in the Document flow. But when i check in the VBFA table, there are no entries. I would like to know how the document flow is updated without updating the VBFA Table or is there any other table gets updated for this flow.
    Please guide me.
    With Regards
    Vinu.N

    Hello Vinu
    For one Sales Order # figures in Notification header table- VIQMEL-VBELN.
    Similarly Notification # figures in Sales Order Header table- VBAK-QMNUM
    That is a solid link right there.
    I Also guess technical objects like Equipment, Serial number also form link between the Sales and Service Documents.
    Also check out the logic in document flow program RIBELF20, may be it will give you the clues to the problem.
    Hope this helps.

Maybe you are looking for