*sigh* My phone has become PUK locked and I have no idea how. PLEASE someone helpe me.
As the title states, my Droid 2 Global has become Pin Unlock Code locked and I'm not sure how. I was going through the process of locking it, and the screen went black halfway through the process and locked itself.
So, I called Verizon...
They said my only choice is to take it to a store to fix it. The closest store is a 2-hour drive and I won't be able to get there until about 6 days from the writing on this post. Does anyone have any ideas of how to fix it? I tried the last 4 digits of my number, and "40" as the customer service lady suggested, but nothing has worked. I don't know that I can do witihout a phone for a week lol.
Well, I looked through the forums and found a thread where someone else had the same exact problem. So, I called the number given and was walked through a solution
Thanks to everyone who looked at the thread
Similar Messages
-
my iphone is stuck in recovery mode and i have no idea how to get it out and ive restored it 3 imes...... any ideas?
Recover using iTunes and set up as a new phone when prompted. If you get any error messages post them here.
-
Hi I have an I pad 64 gig and internal wifi bought about 2 months ago. it keeps coming up with a message "this i pad has not been backed up" I have no idea how to do it can you help.
I also have an I phone 4s with the same message both are with telstra the I pad has a 12 month pre paid wifi contract and the phone is on a monthly contract.Sounds like you actually paying for cellular service and you really need to be on wifi to backup your ipad/iphone.
Normally you have to be connected to wifi and you can do manual backup by going to Settings- icloud- storage and backup and pressing backup now button. Start with your ipad, usually size of the backup smaller and return here if you encounter a problem. -
my computer has become much slower and may have been infected. Is there any course of action I can take in solving this problem?
If this started happening without your having made any changes and without a warning of low disk space, then it's likely that the startup drive, or some other hardware component, is failing. Back up all data immediately, then run Apple Diagnostics or the Apple Hardware Test.
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly. -
i tried updating my iphone 4s to the ios 7 but it said error with the firmware now my phone is stuck in recovery mode and i have no idea how to fix it any suggestions??
Try Restoring it 3 times in a row and see if that works.
If not that error can indicate one of two things: Your iPhone was at one time jailbroken, had the iOS version rolled back, or ran an unauthorized beta and if none of those things are true it is a hardware error. -
I accidently put all my pics from my computer onto my phone and I have no idea how to get them off. Can u please help??
PhilipRoy wrote:
Please see this article about transferring photos from a mobile device to a computer.
http://support.apple.com/kb/ht4083
Good luck Friend.
That's not going to help. That article is for moving photos from iOS device to computer, not for removing them. Additionally, photos synced via iTunes cannot be manually removed from the device. You have to use iTunes to 'unsync' them, as FoxFifth stated.
Camera Roll pictures are the only ones that can be imported from device to computer. Album folders cannot be moved from device to computer. -
There were pictures originally on my computer and were somehow take from my computer completely and moved to my iphone. On my iphone it doesn't let me delete those photos and i have no idea how to move them back to my computer. HELP? I need to keep them, they are valuable to me and were supposed to have been on my computer. I have no idea how to move them back since my computer barely lets me open my iphone and acknoledge those moved photos. Please help me!!
Also in itunes on my computer i deselected the photos and their still on my phone.
-
The part above the tabs shows my wallpaper and I have no idea how to change it back to what it was like before.
ThanksFirst of all, Excel file can't save to iBook. (iBook only can view PDF files). That's why you don't see it in "open in" options. In order for you to save excel, you will need a third party app like Numbers, Office2. There are a few free apps that can use to view. I used Office2 from Byte2, because I can not only store and view later, I can do some edit too. Especially when you want to edit a few numbers and re send them to my office or clients will be very useful for me.
-
ok, i have lost my ipod and i REALLY need to find it, and i have no idea how i can track it. HELP!!!!
There is no way to track a lost or stolen iPod Classic. Sorry.
Reporting a lost or stolen Apple product
B-rock -
I have downloaded OS X Mountain Lion from the App Store. It took two hours to download but now its not running and I have no idea how to make it run!
Download was complete and I accepted everything and restarted computer but its still running 10.7.5
Any idea how to get OS X Mountain Lion to run?What you donwloaded was the OS installer. You still have to do the installation.
To get started, double click on the download, then double click again and follow instructions. -
Ive gotten a zip file and i have no idea how to open it and view images
ive gotten a zip file and i have no idea how to open it and view images?
Double-click it in the Finder.
(107691) -
Most of the videos I have purchased from Itunes have disappeared from the screen and I have no idea how to get them back...help ????
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences, but not Bookmarks and history''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
i have downloaded adobe reader but it still says i need to accept the end user license agreement, i have searched everywhere and i have no idea how to "accept" this agreement
yes i have for sure launched it this is what it looks like at the bottom of my computer, it says by downloading adobe you already agree to the license agreement but I've tried googling, "how to accept the end users license agreement" and it brings me to the agreement but there is no link or button to press on in order to accept it
-
I'm trying to order a calendar off iphoto and have never had any issues, now it wont allow me to input a canadian address for ordering help help help this is an xmas gift and i have no idea how to fix this have tried numerous things
No I didn't even read through your post, to long.
You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is. -
An answer to a similar question on this said they (they not specified as to who) needed to enable two things POS or something and I have no idea what that means. Is it even possible to make it my default mail if it's Microsoft exchange?
If you're simply referring to adding a mail account that uses an IMAP server, the short answer is yes, it will work. What did you mean by default email? You can setup multiple mail accounts so you shouldn't have to worry about a default mail account. To setup additional accounts (or delete for that matter), you can go to Settings>Mail, Contacts, Calendar>Select the Account (Delete) or Add Account.
What is your mail provider? Often you can contact your IT department, or if it's a common mail server, googling will find the server relatively easily (ie: gmail: 'Google' 'imap server for gmail'). If, by default mail, you mean your Apple ID, yes you can also create an Apple ID that uses an IMAP associated email address. Your Apple ID can pretty much be any email address as long as you have access to it to confirm the account's creation.
Maybe you are looking for
-
NEED HELP! - Installing Camera raw presets from USB Stick
NEED HELP! -installing Camera raw presets from USB Stick. I am attempting to install the Camera Raw Presets. It says to put them into User Name/Library/Application Support/Adobe/CameraRaw/Settings... When I get to CameraRaw the ONLY folders in ther
-
When I send an email my contacts are changed in my Address Book on both my Mac and iPhone4.
All my contacts are entered only in the first name space. ie John Smith is entered as John Smith in just the first name entry space - I don't use the last name space at all. When I send an email, that person's address gets changed immediately my addr
-
Using SSIS Script task to populate data from one table to another
I have two tables Table A and Table B. Need to insert data into Table B from Table A. First, I truncate Table B and then insert. Few columns in Table A and Table are similar. However, I need to join with other tables Table C, Table D etc with Table B
-
Doubt about which files i must download
Hi comunity I'm new in this Sap thing, I'm starting to work in sap, but previously I was planning to install it in my Laptop but I have a doubt, I did go to Download Sap netweaver trial version for 64 bits, i have w7 64 bits, but whe
-
Help! The taglib used in the Face puzzled me.
if i quote the taglib using the format below: <jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:c="http://java.sun.com/jstl/core" xmlns:jsp="http://java.sun.com/JSP/Page" > <jsp:directive.pag